Turning on / start 8G view

I recently got a 8Gig view in a 'shit bag' of woot.com. Nothing was included - JUST the player. If you know something of Woot BOC, you know that I have no illusions about the possibility of this thing actually being a Clipboard. It may not work at all. And if this is the case, then such is life.

Fortunately, I already have an e260, so it turns out that I have the right cable to charge/use the view. If this initial assumption is incorrect, please let me know and ignore all the rest of my post. Otherwise, continue on with me while I describe the lack of exciting things happening with my opinion.

I plugged the USB end into a port on my office computer and my e260 Sansa plugged end to ensure it load / link. He did. I disconnected the e260 and plugged in the view. The blue circle illuminated long enough so that the screen flashes a Sandisk logo, an image of a lock quickly followed. After searching the manual for this puppy, I learned that this image "when any button is pressed so that the player is in locked mode". Unfortunately, my drive is NOT in the locked mode. Soon after, the screen and the blue ring goes out. Nothing happens. I unplugged the cable from the view and click the power button. I got the same result of blue ring lit with logo then lock sign, then nothing. Yes, I checked it about 30 times, I didn't hit the button in the locked mode. And no, the computer does not even record that something has happened.

After digging a little bit in the forums, I tried to reset the player, hoping it would help. I followed the "push the power button for 15-20 seconds thing about 5 times. It changed nothing.

My next thought was to reformat the thing. I read the instruction manual and found that none of these options would work for me. I can't view software to start so I can't rummage in the settings to reformat. The computer is not time to acknowledge the view before its judgment, so I can't reformat through control of the computer.

I read through the manual and found no other inspirations. What I stumbled on in the forum, other places on the internet or in the manual seems at least need advice connected to the computer.

Info by computer, in case it helps (please do not mock my shit computer :)

-The model plays nice with the 4Gig e260, that says something at least.

-Windows Vista Home Premium 32 Bit - Service Pack 1 (recently moved and this model is in need of an update for Windows - this might be a reason for questions?)

-AMD Anthlon 64 X 2 Dual Core Processor 4200 + 2.20 GHz

-2 gig Ram

I'm not sure of what could be my next step. Any thoughts would be greatly appreciated!

~ Aeramis

Well, I decided that since I had no guarantee to talk about anyway, I would just open this 'thing'. It is apparently a problem with the switch. The way it feels, I think it is a defective switch or the person who used it and returned, he managed to jam in too hard and made a little cranky passage lock. After is fluttering with switch, completely removing and carefully turn, the thing seems to work perfectly.

BONUS: The last guy (or chicken) put a bunch of music on the thing. I'm trying to transfer the music from my computer right now, to add to my files. (only if I already own the license to the song - music to fly is bad...)

This thread can be closed and blamed on me

Tags: SanDisk Sansa

Similar Questions

Change button turn off Start Menu to logoff

The Start Menu comes up with three buttons at the bottom right: one with an 'X' with a padlock, one with a triangle pointing right. The X button, of course, stop the machine. In my environment I usually have logoff instead of stop. Is there a way to Vista to configure this button X to be a disconnect? Thank you.

Hello

No, it is not natively customizable. The function is part of a library of system file. You may be able to find a count of third party product that can do, but there is nothing built into Vista to do.

Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

Windows 7 turns with start open Menu then automatically starts programs

Not very tech savvy, so I don't know if this has something to do with a virus.

Yesterday, I noticed that Firefox kept reporting '' high unusual activity. '' I removed all the possible extensions that may be the cause. To be sure, I did a with Windows Defender and Kaspersky virus scan and no viruses were found. My computer up to date with this malicious software removal tool, but it would not be updated from Windows Explorer 11.

This morning, at the opening of my computer, I noticed that the Start Menu was suddenly. Then it started to open programs automatically. When I opened Firefox, once again he says '' high unusual activity. ''

Would appreciate any help step by step.

We understand. You can remove applications on the boot parameters. Click on this link to help you solve this problem.

Keep us in the loop for updates.

Thank you.

Problem starting Smart View

Hello
I have a problem with Smart View, which disappears into the launch of Office.
Can you help me solve this problem?
Thanks in advance
I use Smart View 11.1.2.5.000
and office 2013

Have you read and tried the following Oracle support doc - Smartview tab disappears from Excel (Doc ID 1991963.1)

See you soon

John

How to start the view off of the ref cursor Oracle as input/output param

Hello world
We use JDev 11.1.2.3 WL 10.3.6 and Java 7.
We are at the beginning of our transition from Oracle Forms to ADF. We have a very large forms that uses many store procedures that have IN/OUT ref Cursor parameters and tables plsql. I tried to find information on best practices to achieve, but only seemed to find tutorials on SEO of the Oracle ref Cursor return functions. I hope we don't have to rewrite our code of database to work with ADF.
This is an example of a proc currently a block on a form based on directly
The ref cursor parameter is input/output to satisfy the way the form handles this type of paradigm.
ADF we want I hope to reuse these procs existing (without the need to wrap/overload them) on the basis of the display objects.
Example:
/ * my record type which houses the information I want to go back * /.
TYPE rec_hist_vacpac_status IS RECORD)
rec_order NUMBER (5),
rec_rownum NUMBER (5),
return_column SAM_VACPAC.vacpac_status%TYPE,
rec_login_id SAM_VACPAC.ins_user%TYPE,
status_date SAM_VACPAC.status_date%TYPE
);
/ * Sets the ref cursor type * /.
TYPE lcur_hist_vacpac_status IS REF CURSOR;
/ * This is a procedure that would take some info link go / return
Return the ref cursor of this information as an in / out * /.
PROCEDURE prc_myinfo_refcur)
pnum_identify_seq_id in NUMBERS
pcur_myinfo IN OUT lcur_hist_vacpac_status);
Can anyone point me in the right direction on documentation on this?
Thank you!

Hi Cemerson:

See this example:
1. 1. create a TYPE as an object
CREATE OR REPLACE

TYPE GOTYOB_EQUI

AS AN OBJECT

(

CDELEM VARCHAR2 (50).

TIELEM VARCHAR2 (2)

);
1. 2. create a TABLE TYPE AS
CREATE OR REPLACE

TYPE GOTYTA_EQUI

AS THE GOTYOB_EQUI TABLE;
1. 3 create a function, it returns the TYPE of the TABLE
FUNCTION fn_equiposarriba)

pa_cdelem IN VARCHAR2,

pa_nucomp in NUMBERS

pa_anperi in NUMBERS

pa_meperi in NUMBERS

)

Gotyta_equi RETURN PIPELINED IS

CURSOR trae_equimani (va_cdelem VARCHAR2) IS

SELECT cdelem, tielem, cdelempadr,

(SELECT cdequi

Of evm_alim

WHERE anperi = eq.anperi

AND meperi = eq.meperi

AND nucomp = eq.nucomp

AND cdalim = eq.cdalim) cdalim

Of evm_equimani eq

WHERE anperi = pa_anperi

AND meperi = pa_meperi

AND nucomp = pa_nucomp

AND cdelem = va_cdelem

AND cdelempadr <> cdelem

AND tielem <> 'A ';

equimani trae_equimani % ROWTYPE;

va_cdalim VARCHAR2 (100);

BEGIN

-Loading los equipos aguas arriba

WHILE equimani.cdelempadr IS NOT NULL LOOP

OPEN trae_equimani (equimani.cdelempadr);

equimani: = NULL;

SEEK trae_equimani INTO equimani;

CLOSE Trae_equimani;

IF equimani.cdelem IS NOT NULL THEN

PIPE ROW (gotyob_equi (equimani.cdelem, equimani.tielem));

END IF;

END LOOP;

RETURN;

END;
1. 4 SQL Query with the help of the function... you can use this SQL in a display object
SELECT

*

Of

TABLE (gopq_eventos.fn_equiposarriba (' F-SCZ-043-103', '))

1,

2013,

6

)

)

Best regards, Marcelo

computer management does not display services properties

I am running windows xp. I have a multitude of programs that won't run. This seems to be the result of stopping some services or changing a property in the management of the computer. Backup and restore are not running at all, not even an error since the desk top. Internet Explorer will not work. CPP will not start. .Net runtime op... will not turn on, start, or view properties. None of the computer management services show the properties. Not active album or start or display properties. net port sharing. TCP will not allow, start or display properties. Network DDE will not activate the starting or display properties. Reduced programs do not display the taskbar. 1068 and 1058 errors disk logic Server Management error. Msconfig does not solve this problem not start in safe mode. How can I fix this computer?

Hi Tommy,.

If you find that the Windows disc is faulty, access the link below for more information on how to get the replacement of Microsoft software.

http://support.Microsoft.com/kb/326246

It will be useful.

Thank you and best regards,

Srinivas

Microsoft Answers Support Engineer

Visit our Microsoft answers feedback Forum and let us know what you think

View towards the front/back/bookmark and all the other great records page disappeared. I tried to start without danger but that brings back me to the same web page without any tool. Everything that I have visible are the carriage of Norton and cards &

How can I get my tools back on top - no backward/forward, no VIEW, no tools, no bookmarks - nothing. I tried opening in safe mode and start - run by following the instructions but the same high vacuum of the page opens.

Don't see the menu bar (file, publishing, display, history...) (Help)? Hold down the key (key in OSX) and press the following letters in this exact order: V T M
The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.
See the other bars under view > toolbars. Click on one of them will place a check mark (display) or remove the check mark (not shown).
To display the status bar, display, and then click status bar to place a control mark (display) or remove the check mark (not shown).
- If items are missing then see if you can find them in the view > toolbars > customize window.
- If you see the item in the window customize then bring her back in the window, customize the Navigation toolbar.
- If you do not see this item then click Restore default set in the view > toolbars > customize window.

Failed to start the event viewer. Access is denied

"Failed to start Event Viewer. Access is denied"message with a red x appears when I click on details of view in the event log in the task: advanced tools

I am the administrater and the only user, the user account is disabled. I checked the register and complete the keys in Services/Eventlog 6 other tasks open OK, only the event log does not open.

I have never used this service before, running Vista Business SP2 on a laptop HP Compaq8710p (7 years), all the drivers are up to date, I've checked for viruses and malicious software (Symantec Endpoint and Windows Defender). My HARD drive is only 45% used (55% free), 4 GB of memory.

Would appreciate some help here

Thank you

Please run a check of system files (SFC)

All instructions are in our Wiki article below...
If you have any questions please ask us for .

Check the file system (CFS) Scan and repair system files

Lost registration bar main tool "bookmarks", etc. Since the headerof start page. "" How to collect?

Toolbar Google is the only one that appears on my start page for Firefox - does not long "history", "more often to open web sites", "bookmarks", etc. No longer can click on "Bookmarks" as an example or other favorites and have the open list. How to restore the complete header information?

Don't see the menu bar not (File, Edit, View, history... (Help)? Hold down the key (key in OSX) and press the following letters in this exact order: V T M
The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.

See other bars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).

Mode full screen
http://KB.mozillazine.org/netbooks#Full_screen

See also:
Back and front toolbar buttons or others are missing
Customize controls, buttons, and Firefox toolbars

Help! (sansa view)

When I try to turn on my sansa view all I get is the screen that says SanDisk and then the screen disappears. Its as if it starts to spin and then stops. I tried to reset but it doesn't work! Help, please!

mamadvade wrote:
How you don't format it?

If it goes over to the menu screen and if it is not recognized by the computer, you can do a format of strength. While it is off, turn on the hold switch and then press and hold the top button or 12oclock wheel. Connect it to your computer and as soon as it turns on, unplug it. It should now ask you if you want to format the device.

Folder view settings and the desktop icons.

Hello

Today, I turned on my computer to find the sight of my account settings are changed and salis. I also found my command to change the icons of the bureau and all messed up.

Since I bought my computer, I used the settings of Windows Vista Home Premium by default for folders.

I have not downloaded anything or update of Windows Vista Edition Home Premium.

If I turn on "Remember folder view settings" in the folder options - nothing else happens - have seen all I don't want their value and open them in small windows.

Is someone can you please tell me why this happened? Could this be the results of a hacker?

The second option resets all display settings. These next two commands to reset the default values defined by you.

Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

Reset saved settings will allow you to change the settings.

This allows to get the same thing as shexvw.

Tip clean boot

If the above does not help.

Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box everything left on the tab EXPLORER...

Reset. If this resolves your wake problem half of the items until you find the one that.

Understanding saved views and navigation records
In Windows 2000 Professional, the view you use is not always permanently saved in Windows Explorer. You can control if the views that you use are stored permanently or temporarily, to help to memorize check box of each folder view settings tab display of the dialog box folder Options (see figure 9.3).

By default the Remember each folder view settings is enabled. When you choose to leave this setting is enabled, the following occurs:

changes that you make to the folder view are saved automatically when you close the file.
b. the display allows you to display a folder is not applied to other folders.
c. When you open a folder, it opens in the view that you used when you last time there.
When you clear the checkbox for don't forget to display settings for each folder, the following occurs:

a. When you start Windows Explorer, the first folder that you discover poster in saved view of the folder. Explorer Windows holds who discovers in the temporary memory and applies it to all the files that you have visited while Windows Explorer is open, unless you manually change the view.
b. as you navigate to other folders (after having opened the original record), the view saved for each folder is ignored, and when you exit Windows Explorer, the folder view that you used to display multiple records is cleared from the temporary memory.
c. the next time you open Windows Explorer, once more, the saved view of the first folder that you open that determines how you display multiple records.
Setting all folders on the same point of view

Some users want to have all their Windows Explorer folders defined on the same point of view. In Windows 2000 Professional, the default is that any changes to the view of the file is automatically saved when you close the file and are not applied to other folders. However, you can set all folders to the same view by using the Folder Options command, as described in the following procedure.

To set all the folders on the same point of view
1. in my computer or Windows Explorer, set the display according to your preferences.
2. in the Tools menu, click Folder Options.
3. in the Folder Options dialog box, click the view tab.
4. under folder views, click on like current folder.
Important remember view settings check box each folder under the view tab of the Options dialog box of records (see Figure 9.3) affects how the display settings for individual records are applied and saved. For more information on the impact to disable this check box, see "Understanding saved views and navigation files" earlier in this chapter.

Windows 2000 Resource Kit

How can you (View Source on the Page) view the source on a certain Web page?

"I wonder how to start a ' view Page Source ' window (accessible by right-clicking on a page and pressing the Page view Source) I can get to a certain page (one) source. If I can't, it's a suggestion.

You can prefix any link with the view-source: Protocol to view the page source in a tab.
- View-source: https://support.mozilla.com/en-US/questions/835895

I chose an option that has eliminated the word of bookmarks in my Start menu of the page and, of course, all the rest. I want it back to the default initial value, but don't see any option to do this. currently I see: most visited, road and past news repo

I chose an option that has replaced "bookmarks" from the menu with the most visited, commissioning and the latest headlines. I have to go back to the default value, simply "bookmarks" How do I do this?

Don't see the menu bar not (File, Edit, View, history... (Help)? Hold down the key (key in OSX) and press the following letters in this exact order: V T M
The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing

See the other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).

Mode full screen
http://KB.mozillazine.org/netbooks#Full_screen

See also:
Back and front toolbar buttons or others are missing
Customize controls, buttons, and Firefox toolbars

Re: Satellite L300 will not start in the BIOS

Hello

I have a problem with my laptop.
I have windows Vista installed.

I try to boot a Linux Live-CD, but after I pressed the power button, I see the logo Toshiba Leading Innovation.
When I press F2 or F12, nothing happens the computer laptop stops booting, even the HDD light flashes).
I can't get into the BIOS!

If I do not press a button any after power on, then Windows Vista starts Ok.
Two months after F12 I could choose the Boot by USB - entrance.

Please, help me to solve it.

When you see the Toshiba logo on the screen you see in the background statement: Press F2...?

This happens for the first time?
Might have turned quick-start option?
Check this please. Open Toshiba assist > optimize > HWsetup > boot priority > make sure bot speed is set to normal.

Want 700-270-d: hp envy 700-270d auto start when receipt main decision-making power

What power on the main power of the auto-start System. Suspected of failure of the power supply.

try to connect try UPS, even once that the power received ups automatic system power on. Try Apr always the same question. If the direct plug to the ankle once the switch from the wall on it also turns auto-start without pressing the power on button on the desktop.

Hello

If I understand the BIOS setting to 'RESUME on AC Pwr' or similar expressions is selected.

There are BIOS Wake on Lan, USB etc keyboard options and with Dells to happen on every day at the same time.

It is a BIOS setting that you need to change.

If in doubt please ask.

Turning on / start 8G view

Similar Questions

Maybe you are looking for