Turning the computer off

Similar Questions

• Security Essentials works very well after installation, but when I turn the computer off it does not start at the top. That you uninstall that reinstall. Who is wrong?

  Getting a message that my system is blocking the program but their isn't an indication that my system is interfering with its operation. Antivirus programs have been removed from my computer; That is to say. Norton Antivirus, Symantec Antivirus. Firewall doesn't seem to have this effect on the operation of Security Essentials. Why I get this message when I restart my computer is a mystery to me, because it works very well after downloading until I restart my computer. My email address is > * address email is removed from the privacy *.

  Hello

  Did you change your computer before this problem?

  A possible reason for this problem is that you have installed entirely or partially on the computer security software conflict.

  You may need to use a cleaning tool to remove your prior security software:

  Microsoft Security Essentials - Installation Checklist and frequently asked Questions

  http://experts.Windows.com/w/experts_wiki/89.aspx

  If the problem exists, you can ask your question in the Forums of Microsoft Security Essentials.

  http://answers.Microsoft.com/en-us/protect

• XP installation update every time I turn the computer off.

  I don't know what happens, whenever I turned off my PC (running Windows XP Home Edition, Version 2002, SP3) for the last week or so, it is said that it will install an update, if I disable normally.  I mean, click the button, it installs and turns off, and then the next time that I turn it off, it happens again.  1 update every time, I let it run all along, just as I always before.

  Teepet,

  Please download and save the Fixit on this page - How to reset the Windows Update components?
  Once the download is complete, close all open programs and browsers.
  Now run MicrosoftFixit50202.msi and choose it's default mode.

  When the Fixit has finished, open automatic updates in Control Panel. Do not restart the system, but even if you have been invited to.
  Set the update option for " download updates for me, but let me choose when to install them ." Click on apply, then OK.
  Close the automatic updates.
  Reboot the system now.

  Doing the above will force the automatic updates to download all the updates that are missing.
  When the Update icon, click it.
  Please note that updates are available and their numbers of KB.
  Close the window.
  For now, do installation No updates until what you have posted to those to whom they are.

  Expert MowGreen Windows IT Pro - consumer safety

• Turn the computer off

  I have a new iMac and continue to receive the message that I have to disable LR6 on my old since I also activated on my laptop.  How can I turn off LR 6 on my old camera?

  If you still have the old appliance, open Lightroom, and then select the menu command Help-> Sign Off

• I configured the netgear wireless router and works fine but when I turn the computer power off and back on I can't get connection

  Hi can anyone help, I am with AOL, I just switched to the Platinum service, I configured my router netgear DG834G wireless and that's all works fine, but if I turn the computer then turn it back I cannot get a connection and when I ask her to fiind wireless networks the computer tells me that windows does not support my wireless network and I must have another program running , but I didn't so I have to reload the settings again for windows to set it up. What happens whenever I turn off the computer. AOL are without help please someone has any ideas - I use windows xp service pack 3

  Hi Timstimpson,

  It is possible that the Automatic Configuration Windows wireless service is not configured to run at startup.
  Try the following:
  1. click on Start and run
  2. type in the box to run services.msc
  3 scroll down and look for the Automatic Wireless Configuration service
  4. double-click on the service and make sure that the Startup Type is set to Automatic
  
  
  Let me know if it works for you!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After that turn the power off for a few days and then back on... all my desktop ICONS was reorganized.

  After that turn the power off for a few days and then back on... all my desktop ICONS changed. I placed the worms where I want that they and computer restarted and they get rearranged again. Help, please.

  Hello Kenneth Pincus,

  You can create a new profile on the computer and if the desktop icons stay on their position. If this is not the case, the other profile is corrupt. To create a new user profile, you can see the article mentioned below for the procedure.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

   

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

  Let us know the results.

• HP deskjet 2130: whenever I turn my computer off my HP deskjet printer is uninstalled.

  Whenever I turn my computer off my HP deskjet printer is uninstalled. Once again, I have to remove it from the Control Panel, reinstall it again and then use it. Its getting really heavy. Please help me.

  Hey @Arry2,

  Welcome to the Forums of HP Support!

  I see that you have some problems with your printer Deskjet 2130 on your Windows XP computer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, launch the printing and scanning doctor. You can download the doctor by clicking on this link.

  Please let me know the results after following the above. If your queue still, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Photosmart 7520 error: there is a problem with the printer. Turn the printer off, then on.

  I have a photosmart 7520 affected by the following issues.

  Issue #1: randomly, all lights start flashing market and the screen reads the following:

  Error. There is a problem with the printer. Turn the printer off, then on.

  I can't find a move that throws this to happen.

  #2 problem: When the printer is turned on and slowed down, also at RANDOM times, the printer will "Ding" followed by the flashing light wireless. So what sounds like the cartridges are cleaned, then a sound like the charger spinning or the printhead full running followed from one side to the other, then ending with a "Ding" and then back to normal.

  When this happens, the wireless connection is disconnected and then reconnected. Also, this disables the "Scan to computer" function on all computers on the network and manually requires the reactivation of all.

  From what I can tell the printer restarts itself.

  It is plugged directly into the wall outlet, no surge protector.

  Technical support has already go through the stages of the print head, me up to the top of the chain and eventually replaced the printer with a new brand.

  THE NEW PRINTER STILL DOES THINGS AS PRECEDENT.

  This printer is connected wireless to router Netgear N900. My all current computers running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.

  If someone is or has experienced the same or similar problems, I could sure use help.

  Solved myself.

• I got the message "SIM failure" on my IPhone 5.  The first time, I turned the phone off and turned it back on and it started working again.  I got the same message today and by turning the phone then next turn did not eliminate it.

  message "SIM failure" of "no SIM".  1st time it happened I turned the phone off and turned it back on and it was OK.  It happened again, and this time cut off and back on does not the phone is working correctly.  Cannot make or receive calls.  Nothing has ever changed with my carrier.

  First get a replacement SIM from your operator. If this does not fix it you have a hardware problem.

• Is there a need or a way to turn the pencil off the power when you do not use?

  Is there a need or a way to turn the pencil off the power when you do not use?

  Unfortunately not. The best thing is to turn off bluetooth. However, you will need to re - pair the iPad and the pencil again by plugging in the port of lightning. When not used the pencil of apple do not lose a lot of power.

• How to turn the camera off when I get the picture?

  How to turn the camera off when I get the picture?

  How to turn the camera off when I get the photo I do my iphone 6 mute and when I get the picture give sound

  Some countries do not allow phones take pictures of silent.  iPhones sold in these countries do not allow the sound picture to shut up.

• Turning the monitor off

  Hello

  I use Lenovo U400 and I wonder if it is possible to turn off the monitor, only,

  Thank you.

  Hi CalciumKid,

  Lenovo U400 is not a hotkey to turn off the LCD, but as an alternative:

  If you are running Windows 7, press the F10 key and choose projector only. This will turn off the internal LCD monitor and switch to an external monitor (if you have not, it will simply turn the monitor off). To switch back, simply press the Enter key.

  If you are under Windows 8, press the F10 key and choose the second screen only. To switch back, simply press the Enter key.

  I hope this helps.

• error message 'there is a problem with the printer turn the printer off even more'

  I have a new 7525 HP photosmart HP printer, if it can find all the flashing lights with an error message on the screen "is there a problem with the printer. Turn the printer off on new"this does not solve the problem... Can't clear this error message!  Cannot use this printer!

  Hi sandrafranks,

  Thank you for your answer!

  In my view, it is unwanted material. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Hope this helps and have a great day!

• Power Button lockout allows me to turn the monitor off.

  A button on the front of my HP 2310e monitor allows me to turn the monitor off.  When I try to do a "Power Button locked" message.  How to fix this?

  Glad to know that your problem is solved. In case, if you need help, you can always post your questions as well as your valuable suggestions in this forum.

• My iPad does not recognize not my Officejet 6500 has, unless I turn the printer off and then on again. Why?

  I recently changed my router from BT to Technicolor gateway provided by Utility warehouse.

  Previously, my iPad easily recognized my HP Officejet 6500 printer has (ethernet) but now this isn't unless I have turn the printer off then on again.

  Of course, it is a pain. How can I solve this problem?

  Thank you very much

  Hello

  It seems that the new router may not support multicast or was not configured correctly.

  Networking Hello Zero Configuration Apple is the method of communication used by any Apple device and relies on IP multicast.

  Some routers does not support multicast or maybe this option is disabled by default.

  I wouyld recommend contacting the Technicolor gateway serice provider and check if the access point supports multicasting, or it may require updated firmware or the specific support configuration.

  Kind regards

  Shlomi