XP installation update every time I turn the computer off.

Similar Questions

• I got the message "SIM failure" on my IPhone 5.  The first time, I turned the phone off and turned it back on and it started working again.  I got the same message today and by turning the phone then next turn did not eliminate it.

  message "SIM failure" of "no SIM".  1st time it happened I turned the phone off and turned it back on and it was OK.  It happened again, and this time cut off and back on does not the phone is working correctly.  Cannot make or receive calls.  Nothing has ever changed with my carrier.

  First get a replacement SIM from your operator. If this does not fix it you have a hardware problem.

• Gets message "install updates" every time I stop the Windowes XP Professional computer.

  Original title: I keep getting update requests.

  For the last 2 days I have been doing the updates 'install' everytime I close

  to the bottom of my Windows XP pro.  It is not usual for my PC.  Why does
  This, and what should I do?

  Hi denita_468,

  You did it changes on your computer before this problem?

  In order to diagnose the problem, you can check the updates failed to install in the Windows Update site:

  a. click Start, click all programsand then click Windows Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  You can follow this link and check if the problem persists:

  How to reset the Windows Update components?

  Hope the helps of information.

• Security Essentials works very well after installation, but when I turn the computer off it does not start at the top. That you uninstall that reinstall. Who is wrong?

  Getting a message that my system is blocking the program but their isn't an indication that my system is interfering with its operation. Antivirus programs have been removed from my computer; That is to say. Norton Antivirus, Symantec Antivirus. Firewall doesn't seem to have this effect on the operation of Security Essentials. Why I get this message when I restart my computer is a mystery to me, because it works very well after downloading until I restart my computer. My email address is > * address email is removed from the privacy *.

  Hello

  Did you change your computer before this problem?

  A possible reason for this problem is that you have installed entirely or partially on the computer security software conflict.

  You may need to use a cleaning tool to remove your prior security software:

  Microsoft Security Essentials - Installation Checklist and frequently asked Questions

  http://experts.Windows.com/w/experts_wiki/89.aspx

  If the problem exists, you can ask your question in the Forums of Microsoft Security Essentials.

  http://answers.Microsoft.com/en-us/protect

• How can I disable the password so I don't have a need every time I start the computer? I am running VISTA

  I just want to turn on the computer and not necessary to use a password. I am running VISTA on a ACER aspire 9410-2028

  Hello

  This should help you:

  "How to Log on automatically on startup of Vista '

  http://www.Vistax64.com/tutorials/66966-logon-automatically.html

  See you soon.

• Why didn't I sign every time I use the computer

  I just Windows 8 and whenever I want to use the computer for me to sign. I do not want to connect. That's not all: I leave the computer for a period of time, then again, I have to connect. I'm really tired of signing in. Help, please!

  Hello

  This works if you sign with a password... If you register with a Microsoft Account ID, the process is a bit more complicated...

  Go to user accounts and click on create or change password...

  Follow the steps to change password and when asked to enter a new... leave empty...

• Startup.exe appears every time I start the computer.

  OT: start
  When I start my computer 'setup.exe'.s (with quotes) always appears.   After seceral closing click it disappears. It is very mysterios. Can someone help me?

  Meredith

  Hi Meredithjane,

  You did changes to the computer before the show?
  
  Method 1
  Step 1: I suggest to start the computer in safe mode and check if the problem is resolved.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  
  Step 2: if everything works fine in safe mode, I suggest to perform clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  Note: follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest you run virus scan online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

• Turning the computer off

  After you click "turn off computer", it takes a few minutes to get to "disable."  What can I do to solve the problem?

  By turning off the computer, it is usual to take a minute or less. If you have used a lot of memory, did not run updates, or have an old computer, this will take his time.

• "wallpaper" and all the icons disapper every time I use the computer.

  the desktop "wallpaper" and all the icons - disappear immediately after the mouse click on anything and does not return... I turn on 'star' whenever I want to change a program.

  See if that fixes the problem:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Turn the computer off

  I have a new iMac and continue to receive the message that I have to disable LR6 on my old since I also activated on my laptop.  How can I turn off LR 6 on my old camera?

  If you still have the old appliance, open Lightroom, and then select the menu command Help-> Sign Off

• Do I have to open all the tabs, every time I open my computer?

  Before I had my open windows were saved so not open them all every time I use the computer, but they always left now when I start every day, so I have to go to history and to start looking for everything I was working the previous day.
  Since I normally have more than one window open, it is really a pain.
  Why Save and exit was taken on Firefox 4? It is really necessary!

  Now, Firefox always stores the old session which you can access from the history menu by selecting "restore previous Session." There is also an option to restore the previous session on default value: Home home.

  If you always open the last set of tabs, another approach is the following:

  1. Click on the orange button Firefox, then select options to open the options window
  2. Go to the general Panel
  3. Change the setting "When Firefox starts" to "show my windows and tabs from last time '.

• I try to update Framework 4.0 and every time I restart the server after installation. 4.0 isn't on 3.5 just here.

  I have a server to SP1 Windows 2008R2 with .NET Framework 3.5. I try to update Framework 4.0 and every time I restart the server after installation. 4.0 isn't on 3.5 just here. Why it does this and how do I upgrade to 4.0 to run programs that require the 4.0?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• My laptop installs four updates every time I stop. Is this normal?

  For these last days, my laptop has been installing updates EVERY TIME I stop. And it always installs four. Is this normal, or is there a problem?

  I also recently discovered that my laptop battery "reached the end of its useful life. What is this helps somehow updates?

  Hi Cody,

  1. do you receive any error message when you shut down the computer?

  2. did you of recent changes on the computer?

  This problem occurs when one of the following conditions is true:

  (a) an error has occurred during installation. The update has not been installed.

  (b) the update has been installed. However, a file was not updated to restart the computer.

  See the Microsoft article and try the steps mentioned below.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Once I was struck by a virus, Vista updates every time that the computer shuts down and the custom of the ATI CCC open (error Code 656)

  I was struck by a virus hiding all my files and slowed down my right to the computer. Ive got everything, but because the virus struck, Vista must update every time it stops. Looking at the history of the update, the "update for Microsoft Silverlight (KB2526954)" update failed to install. Ive also had problems with ATI Catalyst Control Centre doesn't opens and downloads via Firefox does not open because the temporary file could not be found. Scanned with 4 types of anti virus, anti-malware and anti-spyware. Any ideas?

  Hi NF108,

  Follow the troubleshooting steps in this thread about the problem with the installation of the update Siverlight.

  Let us know if that helps.

• Windows Update - it gets to the final stage of the update every time it goes to "Starting Windows" and then it all comes back to the update

  Original title: Windows Update keeps reseting

  My computer had a mandatory update that began when turned on. Happens to the last step of the update every time, it goes to the "starting Windows" and then it all comes back to the update. Turn on the computer and then next turn has not changed anything either, and I can't after that.

  Hi Reilly,

  Thank you for the update on that.

  Please follow the steps in method 1, by our Support Engineer Ganesh Achar B replied on 12 February 2015 on the last response.

  If you are able to start the computer in safe mode, take note of the number of KB updates which fails to install.
   

  Also you can restore the system in safe mode.

  Check out the link below to perform a restore of the system.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Warning: System Restore affects file system of Windows, programs and registry settings. It can also make changes to scripts, files, batch and other types of executable files created under any user account on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  Please answer us with the State to proceed to further troubleshooting.