Tuxedo of Oracle and Oracle Tuxedo message queue on a virtual machine.

Similar Questions

• Problem installing oracle 11 g 2 in a virtual machine with IP dynamic

  Hello

  I have install oracle 11 g 2 on a virtual machine in Vmware workstation with dynamic IP address.

  Then I noticed that the global database name is orcl.16.27.57, and the identifier service oracle is orcl on step 10 of window 19

  There will be a configuration manager warning and the company failed due to the following error:

  Listening is not or the database service is not registered with it.

  And even I change the name of global database for orcl, it has also failed.

  When I use the static IP, the name of the database world so SID is orcl.

  then complete the installation.

  So I don't know what the reason is, how to install it without warning during the dynamic use of IP.

  Whenever I have install oracle with static IP, I can't continue like that again.

  Help!

  Thank you

  Now, I'm happy to say it works. Two methods to solve this problem.

  1. install Microsoft Loopback adapt

  2 edit the file hosts, IP hostname

  Of course, we can run them both.

  Thank you

• I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6. Now he says I need to activate windows again, but he said I need a new activation key. Any ideas would be appreciated

  I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6.  Now he says I need to activate windows again, but he said I need a new activation key.  Any ideas would be appreciated

  Yes, you must purchase a full license for the second installation of Windows 7 product key.  1 activation allows only one Windows 7 product key.  Apparently, you now have a second facility that requires a second product key. Carey Frisch

• Determine number of CPU and RAM to allocate to a new virtual machine

  I intend to convert a physical server that has two Quad Core processors and 16 GB of RAM to a virtual computer.  I have no monitor, performance, but from what I can tell, the specifications of the server are exaggerated and the main application currently running on the physical server can run on much less.  I'm confused about how much memory and processors allocated to the new virtual machine.  Surely I don't need to assign eight CPUS and 16 GB of RAM.

  The server running ESX has 32 GB of RAM and two Quad Cores, as well.  There are twelve other virtual machines running on ESX Server and average CPU usage is about 15 to 20% and the memory usage is about 20 to 25%.  I was thinking about a minimum of 1 GB of RAM and 8 GB max on the new virtual machine from, but I'm lost on how many processors to allocate.  I appreciate any guidance.

  This is a good book worth looking at

  http://www.VMware.com/PDF/vi_performance_tuning.PDF

• Oracle Express with an external JAVA virtual machine

  Hello
  
  According to the docs on [Oracle Database 10 g Express Edition: not just for learners | http://www.oracle.com/technology/pub/articles/cunningham-database-xe.html]:
  
  "It has no internal Java in the database support. You can connect to a virtual machine external JAVA through JDBC but, to date, there is no internal JVM. "
  
  Can I call the Java code on the external JAVA virtual machine to Oracle XE?

  The quote was wrong and we are taking steps to correct it.

• How to replace oracle JInitiator with other Native Java Virtual Machine?

  Dear Experts
  I installed ony my server not IBM application called "IBM Filenet IDM webservice".
  It is used for the analysis documents aweb application.
  The problem is that this product uses other Machines virtual Java.  IBM.
  This causes a conflict with Oracle JInitiator.
  So, I decided to depend on Sun or IBM java virtual machine.
  But I don't know how to do this.
  What are the system requirements?
  Help, please

  Hello

  By default in formsweb.cfg you have a section called \[jpi\].
  If you run the form with config = YPI added to URL Sun JRE will be used instead of Jinitiator. Note that you must specify correct jpi_classid in formsweb.cfg match the version of JRE to your client computers.

  To configure forms server to use any version of JRE installed on the client computer, you can create a section in formsweb.cfg

  \[jpidynamic\]
  baseHTMLJInitiator = basejpi.htm
  jpi_download_page = http://java.sun.com/products/archive/j2se/1.4.2_09/index.html
  jpi_classid = clsid:8AD9C840 - 044F-11 D 1-B3E9-00805F499D93
  jpi_codebase = http://java.sun.com/products/plugin/autodl/jinstall-1_4-windows-i586.cab#Version=1, 4,0,0

  and to call the forms with configuration of parameter URL = jpidynamic

  It will be useful,
  Mihai

  Published by: Mihai 15 Sep, 2008 14:48

  Published by: Mihai 15 Sep, 2008 14:49

• How to import the list of names of VM and opposed a script of the imported virtual machines list

  Hi guys,.

  Can someone help me and integrate a csv import script (which contains a list of VMS) and ran the script against the VMs imported to create a CSV output below? Thank you very much in advance.

  SE connect-VIServer xxxxxxxx

  $date = get-Date-format-M - d - yyyy

  . 'c:\Users\xxxx\test\test2\scripts\xxx scripts\Get - FolderPath.ps1'

  $folders = get-file-type vm | Get-FolderPath | Sort-Object Id

  {Set-Path function

  Param ($Object)

  foreach ($folder IN $folders) {}

  If ($folder. ID - eq $Object.Id) {}

  $result = $folder. Path

  breaking

  }

  }

  $result

  }

  Get - VM vditest - 1.xxx.internal | Select-Object - property Name,@{N='Datacenter'; E={$_| Get-Datacenter}},@{N='Cluster'; E={$_. VMHost.Parent}},

  NumCPU,MemoryGB,ProvisionedSpaceGB,@{N='Path'; E={($_. Folder | Get - FolderPath). Path}},@{N='FolderID'; E = {$_.folder.} ID}} | Export-Csv "C:\test\vm-xxx-$date.csv" - NoTypeInformation - UseCulture

  Try something like below script

  It assumes that your CSV file looks like this

  'Name '.

  "VM1.

  "VM2.

  The script

  VM.csv Import-Csv - UseCulture | %{

  Get-VM-name $_. Name |

  Select Name,

  @{N = 'Center'; E = {Get-Datacenter - VM $_______ |} {{Select - ExpandProperty name}}.

  @{N = "Cluster"; E = {Get-Cluster - VM $_______ |} {{Select - ExpandProperty name}}.

  NumCpu, MemoryGB,

  ProvisionedSpaceGB,

  @{N = "Path"; E = {}

  $current = get-view $_. ExtensionData.Parent

  $path = $_. Name

  {}

  $parent = $current

  if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}

  $current is get-view $current. Parent

  } While ($current. Parent - no $null)

  [channel]: join ('-',($path.)) Split('\') [0.. ($path). Split('\'). (Count-2)]))

  }},

  FolderId

  }

• URGENT! After installing 6 Fusion and creation of new virtual machine with Windows 7, I get a message "VMware Fusion cannot enter the unit". WHAT SHOULD DO?

  After purchase, installation and activation Fusion 6 with the license key, I had a library of VMS showing 2 Boot Camp partitions. It's strange that I only have 1.
  I tried to activate them but received a message that it is out of date in 2 cases. (see annex 1)

  I started a new virtual machine with a Windows 7 installation disc directly on my HD. I have provided a way to do this and followed the instructions of Fusion to the screen.

  Apparently, everything went well and after several restarts, the installation appears to be over (see annex 2) I tried to open and run the installed Windows 7. I had however a window with the following message:

  "Pending the unit.

  "VMware Fusion cannot enter the unit. Please wait until the unit starts automatically, or interact with the virtual machine below. ' (see annex 3)

  Here Windows 7 seems to start but after a while with the home screen and of the Øresund finishing this window closed and open a new window called library Virtual Machine on the left showing the partitions of Bootcamp and the Virtual Machine Windows 7 x 64 and in the middle gray a representation of what is supposed to be the Windows 7 desktop. (see Exhibit 4). When I opened the settings button a window with different setting options pops up. This mark means to me that Windows is installed but the final opening isn't the case

  When you quit Vmware Fusion indeed Windows seems to be close (see part 5)

  What is going on? What has gone wrong? What should I do? I don't know how to solve the problem.

  I should f.i. remove the virtual machine from Windows 7 and is free automatically made partition on my HD as the reboot with the Windows installation disc? or y at - it another way to enter the UNIT?

  Help, please!

  Thanks in advance

  Your virtual machine is running. It is in the unit - which each windows gets its own window of Mac - and you have no application Windows running, there is no visible windows. You can start a Windows application in the start of Fusion menu in the menu bar at the top right, or turn on the Windows task bar on the view menu and start applications from there. Or use the view menu to switch to the Single mode or full-screen, which puts all of your Windows desktop in a window separate from Mac.

  You do not have two partitions to Boot Camp on your Mac, you have two virtual machines named "Boot Camp partition".

  The message about it being unable to enter the unit arrives while the merger is pending for the tools begin to run, because the tool is necessary for the unit.

• I have a program on my computer called Belarc Advisor and I noticed since he put it on your programs and software there is no hosted Virtual Machine.

  I have a program on my computer called Belarc Advisor and I noticed since he put it on your programs and software there is no hosted Virtual Machine. I think that's what it shows but what exactly does that mean?

  Hello

  Don't worry about this as you would know if you need a Virtual Machine (and few people use one).

  Virtual machine
  http://en.Wikipedia.org/wiki/Virtual_machine

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• REALLY stupid question about virtual machines and disks of cancellations.

  I'm a bit hesitant to ask this question because it might make me look stupid, but...

  When I'm done using Virtual PC and a virtual machine running Windows XP Pro with Vista 64 Home Premium because the host os, often I did not any significant changes to the hard disk of the virtual machine.

  What I save gets saved to a network share on my server for files and printing from Win98 and saved on a flash drive.

  Assuming that I do no configuration changes or anything else I want to keep, is there a reason barely stopping properly when I 'cancellations discs' enabled?

  Any reason, I can not save time by pressing the 'X' button and choose 'disable and remove changes '?

  I am aware of patches, but took me to inform me of the patches, and I can get patches when it's convenient for me and I always validate changes when I install the patches. I'm not using it for anything other than my classes of the school of the evening for the time being, so it is not much of a value of protection on the virtual machine, and I used to write papers on the host operating system. I just use the virtual machine to play with the admin tools in an environment where I can easily fix it a massive screw-up without spending hours to reinstall Windows.

  Hey SlickRCBD,.

  Not a stupid question at all! :)

  It's very well hit the X when you have activated the disks of cancellations. And corruption or problems with the active virtual machine will be resolved when using the drive to cancel it.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Difference between tasks and events in a virtual machine

  Hello

  I wonder if someone can help me. I am trying to identify when and how the as many times a virtual machine has been migrated manually by a user. The task of the virtual machine in question pane indicates that a task 'Migrate virtual machine' took place 31, but I don't see any event corresponding to this day here. If I click on related events, it comes up indicating that a migration has occurred. If I look at the events tab, then I see that there is a 18-type event "Migrate virtual machine" However there is no corresponding task. There is no event HA and DRS is disabled.

  My question is, that we should I think or is it a combination of the two? Only a manual migration by an administrator would be able to move the machine.

  Thank you

  Dan

  In the web client, the tasks are empty, but events are there.

  I have query to the database of vmware to bring to the event log and the get the DRS and migration events.

  The query has been

  Select EVENT_ID EVENT_TYPE, CREATE_TIME, username, VM_ID, VM_NAME, HOST_ID and HOST_NAME.

  COMPUTERESOURCE_ID, COMPUTERESOURCE_TYPE, COMPUTERESOURCE_NAME from VPX_EVENT where the EVENT_TYPE like '% VmMigrated %' and VM_NAME as ''.

  order of CREATE_TIME

  Thanks for your help.

• Script in time of latency list vm e/s and the data store the virtual machine is on

  Hello.  We have a vsphere 5.0 environment and we live a latency of IO heavy.  I'm looking for powercli script will get the latency of i/o for each virtual machine and get the data store name, to what it is now.  We will access our storage on optical fiber.  I'm trying to get a good overview of the latency of IO in a nice view in a csv file.  I found what could be a good basis to https://communities.vmware.com/thread/304827?start=0 & tstart = 0 , but I'm not sure how to get the name of the data store in the table and I think that it is written to the nfs in any case storage.  Thanks in advance for any info\advice!

  Try the next version, it includes the average latency time read/write for the virtual machine and PAHO are / s average for the virtual machine.

  Since the CSV has a row for each data store, the values for the virtual machine are repeated.

  I also added the host name

  $vmName = "VM*"
  
  $stat = "datastore.totalReadLatency.average","datastore.totalWriteLatency.average",  "datastore.numberReadAveraged.average","datastore.numberWriteAveraged.average"$entity = Get-VM -Name $vmName$start = (Get-Date).AddHours(-1)
  
  $dsTab = @{}Get-Datastore | Where {$_.Type -eq "VMFS"} | %{  $key = $_.ExtensionData.Info.Vmfs.Uuid  if(!$dsTab.ContainsKey($key)){    $dsTab.Add($key,$_.Name)  }  else{    "Datastore $($_.Name) with UUID $key already in hash table"  }}
  
  Get-Stat -Entity $entity -Stat $stat -Start $start |Group-Object -Property {$_.Entity.Name} | %{  $vmName = $_.Values[0]  $VMReadLatency = $_.Group |    where {$_.MetricId -eq "datastore.totalReadLatency.average"} |    Measure-Object -Property Value -Average |    Select -ExpandProperty Average  $VMWriteLatency = $_.Group |    where {$_.MetricId -eq "datastore.totalWriteLatency.average"} |    Measure-Object -Property Value -Average |    Select -ExpandProperty Average  $VMReadIOPSAverage = $_.Group |    where {$_.MetricId -eq "datastore.numberReadAveraged.average"} |    Measure-Object -Property Value -Average |    Select -ExpandProperty Average  $VMWriteIOPSAverage = $_.Group |    where {$_.MetricId -eq "datastore.numberWriteAveraged.average"} |    Measure-Object -Property Value -Average |    Select -ExpandProperty Average  $_.Group | Group-Object -Property Instance | %{    New-Object PSObject -Property @{      VM = $vmName      Host = $_.Group[0].Entity.Host.Name      Datastore = $dsTab[$($_.Values[0])]      Start = $start      DSReadLatencyAvg = [math]::Round(($_.Group |           where {$_.MetricId -eq "datastore.totalReadLatency.average"} |          Measure-Object -Property Value -Average |          Select -ExpandProperty Average),2)      DSWriteLatencyAvg = [math]::Round(($_.Group |           where {$_.MetricId -eq "datastore.totalWriteLatency.average"} |          Measure-Object -Property Value -Average |          Select -ExpandProperty Average),2)      VMReadLatencyAvg = [math]::Round($VMReadLatency,2)      VMWriteLatencyAvg = [math]::Round($VMWriteLatency,2)      VMReadIOPSAvg = [math]::Round($VMReadIOPSAverage,2)      VMWriteIOPSAvg = [math]::Round($VMWriteIOPSAverage,2)    }  }} | Export-Csv c:\report.csv -NoTypeInformation -UseCulture
  

• List of instant and virtual machines in need of consolidation?

  In the vSphere client 5, it is possible to display all the VM in need of consolidation. In PowerCLI, I can't find this option.

  Is it possible to list all the VM who have snapshot in need of Consolidation?

  It is not (yet) available in the regular cmdlets, but it's pretty simple display this as a calculated property.

  Get-VM | Select Name,
  @{N="Needs Consolidation";E={$_.ExtensionData.Runtime.consolidationNeeded}}
  

  And a Variant perhaps useful, only list virtual machines in need of consolidation of the snapshot.

  Get-VM | where {$_.ExtensionData.Runtime.consolidationNeeded} | Select Name
  

• Random virtual machines after vMotion and Storage vMotion network loss

  Hi all -

  I have a couple of tickets open with VMware and our supplier of SAN, EqualLogic, on this issue.  Since the configuration of our production and DMZ clusters we noticed that the virtual machines will sometimes drop network connectivity after a successful vMotion and Storage vMotion.  Sometimes, although much less frequently, virtual machines also spontaneously lose network overnight.  What happened only a few times.  The strange thing is that the other guests on the VM host are fine - they lose any network.  Actually, I can do no more than 3 computers virtual host to another, and 2 of 3 can switch correctly, so that we lose the network.  The work around?  Simply 'disconnect' from the virtual NETWORK card 'reconnect' and the virtual machine will start the return packets.  I can also switch the VM troubled return to the host State and it will find the network.  I can it reboot and re - win network.  I can re - install the virtual card completely, and she re - win network.

  VMware has seen a lot of mistakes of SAN in our log files in order to update us our SAN firmware to the latest version.  That seems to have fixed that but we still have the issue.  Here are some of the specifications - all environments are virtually identical except for memory:

  Of PowerEdge R810

  NICs Broadcom 5709

  EqualLogic SAN running 5.0.5 F/W

  We use frames.  ESXi is fully patched.  I haven't seen a boss or not, it is only some guest operating system that loses the network, but we are a Windows environment.

  When a virtual machine loses the network, we can not:

  • Ping to it
    
  • Ping it
    
  • Ping him at the virtual machines on the same host or vSwitch
    
  • Ping outside our network
    
  • resolve DNS, etc..
    

  I followed some KBs VMware without success, including:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003839
  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & externalId = 1002811 (port security is not enabled)

  -All the VMware tools have been updated to the latest version correct and corresponds to the ESXi host
  -Connected to the service ESXi console, I cannot ping the VM problem by name of host or IP address, but I can ping do not affected by the issue of the OTHER virtual machines.  I can also pings the service console.
  -Connected to the troubled virtual machine itself, I cannot ping other virtual machines, I can't resolve host names, I cannot ping by IP.  The machine virtual CAN ping itself by IP, but not hostname.  I cannot ping other virtual computers on the same virtual switch or network by either IP or host name.  I can't ping the vSwitch network management.
  -All vSwitches are configured in the same way and the same.
  -Notify the switches is set to yes
  -There are a lot of available virtual ports
  -We tried the E1000 and VMXNET virtual cards with no difference.
  -All cards are configured to negotiate, but we tried to force individuals speeds as well as with no difference

  I appreciate your help.  I have problems getting anywhere on this issue with the sellers.

  wkucardinal wrote:

  Still having the issue...

  Sometimes, it might be useful to really check that all uplinks VMNIC for all VLAN does work them. Try this is to create a new portgroup on the vSwitch used by your virtual machines on the host of the first, put a test VM on the portgroup, then go into the NIC teaming policy from the new portgroup and select "Override switch command failover."

  Then down vmnic all except one in unused, then only a single VMNIC is active. Then set the portgroup VLAN to a production of VLAN and try to see if we could ping some expected from the different addresses. If it works, then move VMNIC work until unused and move up to another asset. Try again, and this for all the vmnic. If it works, then you have verified that the configuration of VLANS and other settings are correct on the physical switch in the face of this host ports.

  If several VLANs, repeat the process for all other productions VLAN. Then repeat on the other hosts.

  While that may take some time, occurs if everything is properly configured on the physical switches. When occurs a vMotion virtual machine gets a new "Port code" and is assigned to a new outgoing VMNIC. If there is an error of configuration on one or more physical ports that might seem random, but may still happen on VLAN x on y VMNIC. Given that Port ID policy you use indeed spread randomly VMs on the vmnic these problems may be difficult to diagnose. (Make a disconnection of the VM vNIC gives the virtual machine a new port-ID, which it will move to a new outgoing VMNIC, which might seem to solve the problem.)

• Processor type and speed of Virtual Machine?

  It's the supplier asking for speed and the type of machine that we use.

  Currently, we use a cluster of 3 hosts vSphere with 2 CPU on each host:

  E7440 @ 2.4 GHz

  E7440 @ 2.4 GHz

  X 5460 @ 3.16 GHz

  We have assigned 2 vCPU and 2 GB of RAM for this Virtual Machine.

  What CPU specifications should I give it to the seller?

  Thank you

  Give the seller any CPU speed will make the happier.  Since CPu speed will change as the system moves, its going to be everything the host resides on when check it out you.

  PS - are you really sure, you have to give 2 vCPU... best results are usually with a single processor... even when sellers whine they need 2 CPU.