Tuxedo WARN CMDTUX_CAT:423 restart the Oracle (XA connection)

Similar Questions

• How to import metadata using the Oracle olap connection type

  Hi all
  
  I'm trying to import metadata from MN,
  
  I tried selecting the type of connection as oracle olap
  DSN as host: port: sid
  username
  password
  but in URL url field I need to give
  
  Use OBIEE 11.1.1.7
  
  in OBIEE 11.1.1.5
  
  There is no url, after the username and pwd that allows us to give the name of the target, but I don't under stan have to give into the url field.
  
  
  Can someone help me on this... :(

  Hi Laszlo,

  Finally fixed it by using the following URL

  http://OBIEESERVERADDRESS:port/biadminservlet/services

• Restart the server from connection - disconnects all Clients of PCoIP

  We are beginning (fortunately) in a deployment of view 4.5 and have still running production desktop computers.  We have recently improved from 4.1 to 4.5, and during the upgrade we restarted our connection to the primary server view.  When we did that, PCoIP 10 clients or if we had connected all disconnected - which caused us a lot of trouble, as we plan to deploy several hundred.

  What I've read, PCoIP are supposed to be direct connections and clients and not need the broker after the connection is established.  I looked for the "direct connection" setting, but don't see anything like that, given Admin.

  Is it normal that all customers would be disconnected on the loss of the broker?  Is it possible to prevent this?

  Thank you
  Sean

  It is an expected behavior, if we had feature requests to change. For a bit of background to the explanation, there is two session types at play here that I call the broker session (session authenticated directly to the broker) and the desktop session (user session track on remote desktop).

  When you connect to a session of office through the broker, he has associated with the session broker so that the expiration of the broker session (via explicit logout or the value of the overall delay defined in the admin INTERFACE) it can disconnect by force the desktop session. Essentially, when you turn off the broker properly it will cancel all broker ILA sessions, each looking for sessions connected user, then issue a disconnection request to the agent as with a normal expiration. In the case of an accident equipment/failure of the broker direct connect sessions will not be affected.

• restart the Oracle

  Hello
  
  Oracle 11 g 2.
  Let say, I stop all clusteware resources using:
  
  crsctl stop
  
  
  When I reboot the server, I realize that all the resources are started automatically. How can I change this behavior?
  I want to start it manually using command 'a crsctl start' when the server is back.

  Scofield says:

  When I reboot the server, I realize that all the resources are started automatically. How can I change this behavior?
  I want to start it manually using command 'a crsctl start' when the server is back.

  Use the disable parameter to disable auto-start for CRS services.

• CMDTUX_CAT:423: To WARN: a phase commit - returned xa_commit-7

  Hi all
  
  After the failover, we get:
  
  CMDTUX_CAT:423: To WARN: a phase commit - returned xa_commit-7.
  
  Some information:
  
  The related TMS_ORACLE is water corba object.
  Operating system: Solaris
  Tuxedo 8.1
  
  There was no activity on this subject, that this object was slowed down before the fail. (after restart)
  
  Thank you
  Tech dims

  Hello

  Transactions should not be able to enter a "strange State" where they can not be recovered. Also, it is not necessarily a problem, get a a phase committed an error means that there is a single XA resources involved with the transaction. If by design, you know that the manager that a resource will be involved in the transaction, using a local RM transaction instead of an XA transaction is going to be much more effective. Just make sure that you do not try to mix local transactions with transactions XA that this will not work.

  Kind regards
  Todd little,.
  Chief Architect of Oracle Tuxedo

• CMDTUX_CAT:1380: ERROR: the Message Queue blocking warned childbirth

  Today, I changed a Tuxedo (server) application for product systems (a master and two slaves). Only a small change in the code. But after a period of running, there are a lot of mistakes in ULOG:
  
  CMDTUX_CAT:1380: ERROR: the Message Queue blocking warned childbirth, Qaddr = 583902
  
  And then the server died. After restarting the server, this will happen again later.
  
  I don't know why this happens? THX.

  Hi Bill,

  This happens because the BRIDGE process received a message from the network and could not place the message in the expected IPC queue. This could be because the server handles this message is saved, or the parameters of the system IPC resources are too weak. Please check the recommended actions:

  http://download.Oracle.com/docs/CD/E18050_01/Tuxedo/docs11gr1/messages/cdtux/cdtux013.html

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• Please need help with my application manifest signed Comodo to get rid of the Oracle security warning

  Dear members. I need your help please

  I have a game I'm hosting at www.hiredforoneday.com

  I signed the code with Comodo M/s. I wrote the manifest file (and changed so many times) but I still get the Oracle security warning:

  "This application will run with unrestricted access, which can put your computer and personal information at risk.

  Run this application if you trust the place and the editor above.

  I'm must admit am bat / do not understand what I do.

  Please I need your help on how to write the code manifest, how correctly put it in the jar and how to reference the html code

  The game can be played online from www.hiredforone Day

  I need the system clock of the client and also I used getResources() to read images in the jar file

  on the site, I have a (Play) button. During a call to the play button, the index page connects to the file play.html which is located in the folder pots.
  The file play.html calls the HiredForOneDay.jar file that is located in the folder of the pots. Files such as launch.jnlp, launch.html are all in the jarsfolder.

  My game using Cardlayout (CardLayOutClass) in the Applets init() the

  cardLayoutClass.showCongratulationsPanel (); which shows the Congraculations class

  then setJMenuBar (helpTopicSelector.getBar ()); HelpTopicSelector is also another class

  Here is the code

  [code]

  package hiredforoneday;

  /**
  * @(#) HiredForADayApplet.java
  *

  * @author Ruth Bugembe
  * @author John Bannick
  * @version December 23, 2012
  */
  @SuppressWarnings ("serial")
  SerializableAttribute public class HiredForADayApplet extends javax.swing.JApplet {}
  
  public static CardLayoutClass cardLayoutClass;
  HelpTopicSelector helpTopicSelector;
  @Override
  @SuppressWarnings("static-access")
  public void init() {}

  cardLayoutClass = new CardLayoutClass();
  helpTopicSelector = new HelpTopicSelector (this);
  
  Add (cardLayoutClass.getMainPanel (), BorderLayout.CENTER);
  cardLayoutClass.showCongratulationsPanel ();
  
  setJMenuBar (helpTopicSelector.getBar ());

  }
  
  } [/ code]

  I didn't send in the manifest code because I did so many versions and now am confused

  Thanks again for your time

  Ruth

  I don't think it's possible to prevent the warning message from appearing at least once. There could be an option 'do not show this again' on the dialog box warning that users can check to prevent it from appearing again. Codezone-the only thing I can think is to eliminate the dependency on the system clock client side so that the attribute in the manifest file permissions can be set to 'sandbox' rather than 'all rights '. You don't know if he read images from the same signed jar file still qualified under 'sandbox' - try it and see.

  It is worth noting that other publishers Java RIA as the Knowledge Base for the Skillsoft Support are also facing the same issue, and they document simply as a relatively mild warning message.

• get utc time in oracle without restarting the session

  Hello world
  
  I need to get utc time in oracle without restarting the session. Now I get what type:
  
  Select double sessiontimezone;
  
  In the new session, I'm sessiontimezone exact value, for example, I live in Istanbul, Turkey and there + 02:00. But last Saturday, this value is passed to 03:00. If a session that was created only, when I call sessiontimezone, back + 03:00, this is true.
  
  But, if I call sessiontimezone, I see + 02:00 in a session that created it before last Saturday night.
  
  What should I do to get the value real sessiontimezone without restarting the session?

  do you want to time UTC, you can use...

  select systimestamp at time zone 'UTC' from dual
  

  This will give always the hour UTC

  Ravi Kumar

• How to restart the customer Oracle oracle instance

  I have a server Oracle 10 g with DEVEL instance on AIX machine. I have an Oracle Client on the Windows machine as well. I want to stop and start the instance of my client DEV using .bat file. Is this possible? Does anyone know how to do it?
  
  
  KP >

  Well, right now the correct question should be: how to start the database.
  I am able to connect as sysdba DEVEL on AIX (as from Windows clients) and stop it but when I try to start it returns this message:

  ORA-12505: TNS:listener is not currently of SID given in connect descriptor

  but I'm still able to tnsping my client DEVEL...

  Display the status of the listener, its content and the tnsnames.ora file entry. Here is how I got connected stopped and started. The process that I follow:
  (1) entry Made in listener.ora file as I said earlier, restarted the listener
  (2) Made in the tnsnames.ora file change
  (3) Connect since the closing of the client and started.

  SQL * more: release 9.0.1.0.1 - Production on Fri Sep 18 16:30:58 2009

  (c) Copyright 2001 Oracle Corporation. All rights reserved.

  SQL > conn sys/hawaii@ia1dev as sysdba
  Connected.
  SQL > shutdown immediate
  The database is closed.
  The database is dismounted.
  ORACLE instance stops.
  SQL > startup
  ORACLE instance started.

  Total System Global Area 364904448 bytes
  Fixed size 1287356 bytes
  226495300 variable size bytes
  130023424 of database buffers bytes
  Redo buffers 7098368 bytes
  Mounted database.
  Open database.
  SQL > select * from v version $;

  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - production
  PL/SQL Release 10.2.0.4.0 - Production
  CORE 10.2.0.4.0 Production
  AMT for Solaris: release 10.2.0.4.0 - Production
  NLSRTL Version 10.2.0.4.0 - Production

  SQL >

  Kind regards.

  Published by: virendra.k on September 18, 2009 16:36

• Firefox crashes constantly. I have restart firefox. It does not work. I restart the pc and then reopen firefox. It's still freezing?

  Can anyone suggest a better browser than firefox?
  I'm pretty tired of my browser gel every day. I have restart firefox. It does not work.
  I restart the pc and re-open the browser. It does not work.
  I have uninstall Add ons does not help.
  I just can't keep every day. I show that firefox is updated. 34.0.5

  You can try disabling OMTC and leave hardware acceleration in active Firefox.

  • topic: config page: layers.offmainthreadcomposition.enabled = false

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  Create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• How to restart the computer in safe mode?

  Is there a way to restart the computer in safe mode UN-staged network, or at least to list computer startup options including safe mode, without having to wait for the computer to stop, then press on and hold F8 during initial computer boot?

  In particular, there is a command that I can enter from the cmd prompt?

  If it's important, I have a Dell Latitude D610 with MS WinXP Pro 2002 SP3.

  But I really want a method that works on any MS WinXP.

  You can configure your system to boot in any mode desired by using the msconfig utility.

  Click Start, run and enter in the box:

  Msconfig

  Click OK to launch the utility.

  On the BOOT. INI tab you can add/remove options to the boot.ini file so next time XP starts, it will start in the selected mode.  XP looks at the boot.ini file to decide how it is supposed to start.  You can use the built in Help and/or a few searches on Google to learn more about msconfig.  You will need to adjust things again if you want to start in a different mode, but there would be no F8 key.

  A word of warning.  Some malicious software now recognizes when you added the/SafeBoot option in the boot.ini file on your system.  The malware knows some of the things you could do to try to find and delete this... and he won't be deleted.  He wants you to think that you need to reinstall your XP instead.

  If your system has this condition and you add the option/SafeBoot, your system unbootable ever again successfully XP from hard disk in a different mode until you remove the option/SafeBoot your boot.ini file by starting on something else (like a CD) to manually remove the switch/SafeBoot.

  The switch / SafeBoot used to be pretty, a good idea, but it isn't a good idea these days.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• code not equal to 0 or 1077 Mcx2Svc service name, how do I restart the service windows media extender

  Original title: code not equal to 0 or 1077 service_name Mcx2Svc how to fix and or turn it on?

  One or more services failed. The service does not stop with elegance. Display name: windows media extender service. Restart the service - HOW?

  Hello

  
  1. What is the exact error that you have found?
  2. what exactly is the problem you face?
  3. have you made changes on the computer before this problem?
  Method 1:
  You can follow the steps and check.
  (a) click Start reducing this includes this image, type regedit in the search box, and then click regedit.exe in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  (b) locate the following registry subkey and click on it:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Mcx2Svc
  (c) in the details pane, right-click ImagePath, and then click on edit.
  (d) in the value data box, type the following registry value, and then click OK:
  %SystemRoot%\system32\svchost.exe k fontcache
  (e) also make sure that the ServiceSidType is set to 1.
  (f) exit the registry editor and then restart the computer.
  The REGISTRY CHANGE WARNING:
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  
  Method 2:
  You can follow the steps and check.
  (a) open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  (b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  (c) right click the Media Center Extender Service and then click Properties.
  (d) on the general tab, next to startup type, make sure that automatic is selected.
  (e) if the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  See also:
  Windows could not start the Windows Media Center Extender Service 1068 error
  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/ccbf0746-16a8-4361-824e-b73561458ad2/
  Solve problems with a Windows Media Center Extender device
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-a-Windows-Media-Center-Extender-device
  I hope this helps.

• Vista update: he couldn't stop to restart the computer. Help!

  Once more Windows Update restarted the computer, loss of data and working hours.  It is true that this cannot be avoided?  He took over & could not be stopped.

  I was just finishing a long process of renaming & move files on a DVD burning program, when I saw the Windows Update window that displays a countdown to restart.  There are 2 options: (1) restart now & see (2).  But the option to "Defer" is grayed out.  Nothing could be done.

  I saw the site of Windows Update program may restart the computer when the computer has not been used for some time - but the computer has been used nonstop.  The window on the reboot warning do not appear & was rather hidden under ROM burning software

  Any suggestions?  Will be Microsoft to solve this?

  It is not Microsoft.
  These are public Forums.

  Change the way you receive updates:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista

  Vista offers four different methods for how Windows Update updates your computer. Below, we explain each method and when this is the recommended setting.

  Install updates automatically (recommended) - if you select this option, then all the critical updates will be automatically downloaded and installed on your computer. These updates will install at the time, you specify the fields to install new updates. This is the recommended option for the majority of people because it ensures that you have all the critical updates installed automatically on your computer.

  Download updates but let me choose whether to install them - if you select this option, Vista will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  Never search for updates (not recommended) - if you select this option, Vista never automatically checks updates. This option should never be selected as it puts your computer are likely to be affected, infected or hacked.

  Choose one of the following Options:

  Download updates but let me choose whether to install them

  Look for updates but let me choose whether to download and install them

  Read the news and see which you prefer to use.

  See you soon.
  Mick Murphy - Microsoft partner

• Cannot install Windows 7 "Windows didn't prepare the computer to start the next phase of the installation." to install Windows, restart the application.

  Original title: Installation of Windows 7.

  I tried to install Windows 7 (clean install from XP and reveived the following message is displayed:)

  Windows didn't prepare the computer to start the next phase of the installation.  to install Windows, restart the application.

  I restarted my PC, anti anti-virus disabled (as advised) and still get the error message.

  According to the Upgrade Advisor Windows 7 my PC is compatible.

  Any ideas?

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Restart the computer every hour

  My computer restarts its self every hour on the hour. The first time I had this problem, I have re-installed Windows 7 64 bit because I wasn't sure the copy that is given to me. It worked great for a few months and yesterday that he started to do it again. I sleep off, screen never goes out, also I have it so it does not automatically restart, but it's almost as if I hold the power button to turn off. The only warning I get is the power will be rev and just restart. If I could get any help, it would be greatly appreciated.

  Critical Kernel-Power 41 05/04/2011-08:51:27 (63)
  Critical Kernel-Power 41 05/04/2011-07:51:37 (63)
  Critical Kernel-Power 41 05/04/2011-06:51:19 (63)
  Critical Kernel-Power 41 05/04/2011-05:51:02 (63)
  Critical Kernel-Power 41 05/04/2011-04:50:45 (63)
  Critical Kernel-Power 41 05/04/2011-03:50:27 (63)
  Criticism 05/04/2011 02:50:08 Kernel-Power 41 (63)
  Criticism 05/04/2011 01:49:50 Kernel-Power 41 (63)
  Critical 05/04/2011 12:49:32 AM Kernel-Power 41 (63)
  Critical Kernel-Power 41 04/04/2011-23:49:15 (63)
  Critical Kernel-Power 41 04/04/2011-22:48:58 (63)
  Critical Kernel-Power 41 04/04/2011-21:48:39 (63)
  Critical Kernel-Power 41 04/04/2011-20:48:21 (63)
  Critical Kernel-Power 41 04/04/2011-19:48:01 (63)
  Critical Kernel-Power 41 04/04/2011-18:47:44 (63)
  Critical Kernel-Power 41 04/04/2011-17:47:26 (63)
  Critical Kernel-Power 41 04/04/2011-16:47:08 (63)
  Critical Kernel-Power 41 04/04/2011-15:46:46 (63)
  Critical Kernel-Power 41 04/04/2011-14:46:33 (63)
  Critical Kernel-Power 41 04/04/2011-13:46:16 (63)
  Critical Kernel-Power 41 04/04/2011-12:45:58 (63)
  Critical Kernel-Power 41 04/04/2011-11:45:44 (63)

  ------------------------------------------------------------------

  Log name: System
  Source: Microsoft-Windows-Kernel-Power
  Date: 05/04/2011 08:51:27
  Event ID: 41
  Task category: (63)
  Level: critical
  Key words: (2).
  User: SYSTEM
  Computer: Tabby-PC
  Description:
  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.
  The event XML:
  
   
     
      41
      2
      1
      63
      0
      0 x 8000000000000002
     
      8237
     
     
      System
      Tabby-PC
     
   
   
      0
      0 x 0
      0 x 0
      0 x 0
      0 x 0
      fake
      0
   
  

  Heating issues - read this link unexpected shutdown

  To isolate a possible software problem, then follow the steps recommended in the Windows Explorer has stopped working [don't be put off by the title, it has a much wider applicability].