TV remote control keys do not work

Similar Questions

• Tab and control keys do not work in Firefox (they work in other browsers) AND I went to a new keyboard.

  Tab and control keys do not work the browser Firefox (my browser is up-to-date). The buttons work in IE and Chrome, however, until I realized that, I even changed my keyboard for a brand new, hoping that would solve the problem.

  Hello arlusk, the problem is probably an extension that is not working properly. Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• Installed Tuneup Uitlitie and my control keys do not work

  Hello

  Since I installed Tuneup Uitlities my keys do not work.
  For example: I can't adjust the sound volume or toggle wlan with the keys F1 - F12.

  I already searched in Google, but I can't find a solution. Is it possible that Tuneup have uninstalled or disabled the Launch Manager? How can I install/activate this new?
  I can't find something.

  Hope someone can help me,

  Katja

  > Is it possible that Tuneup have uninstalled or disabled the Launch Manager?

  Never heard talk of launch manager on the Toshiba laptop computer, but of course, the FN buttons are controlled by special software.
  I put t know what system you are using and what laptop do you have but for example:
  Using the Win 7, value added package system and some utility Flash card access buttons controls the FN.

• N8M19PA #ACJ: brightness control keys do not work

  I had my hp laptop a week back.at first keys work alternately means once it works and another time keys are not working.when keys do not work, I used to restart my system while they working.but now, brightness control keys do not completely work. When I used to turn it back on as they are not working.what do I do now? He made me suffer a lot and the strain in my eyes

  aravindsatya

  Uninstall the driver of HP wireless button and restart

  Install the driver

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71829.exe

  your system for other drivers page

• Right control key does not work do not under macOS Sierra

  Since I installed macOS Sierra, the right command key is somehow mapped the option key (and the option key is still down option). There is a new setting I need to change? I'm not find it.

  Reset the default settings

   > sys prefs > keyboard > keyboard > restore ddefaults

• ENVY 15 t-ae000: (F2 and F3) brightness control keys do not work after update bios and Windows 10 update

  After that I upgraded to the latest version of the BIOS and upgraded to Windows 10, brightness controls no londer work.

  Would appreciate any help.  Thank you

  Hello

  If your laptop uses Nvidia Optimus (Intel + Nvidia GPU), try to download and reinstall the Intel HD graphics driver on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74569.exe

  When reinstalling, restart the laptop.

  Kind regards

  DP - K

• After installing new FN and multimedia keys do not work on Qosmio F20

  Hello, my friend buy Qosmio F20 of the Germany, but it comes with Windows Xp with the German language on this subject. I format the hard drive and install Windows Xp Professional SP2. I download all of the drivers who was very available and most of the functions work (like display, sound, touchpad and others), but the multimedia keys and the FN keys do not work (remote work). The other problem is that I can't install the TV tuner.

  With German Windows XP, I try TV tuner but have no SOUND what is the problem? When I try to install the utility software under display appear message that says "Unable to get the information from the BIOS" or something comparable. I have install all the drivers that I found in the Qosmio F20 support page but I have video control with exclamation mark in Device Manager.

  Can you help me?

  Where am I wrong? What should I do?

  First of all he must know that if you are going to install together the Toshiba drivers after installing the OS to do in the right order!
  On the Toshiba driver page, you will find the Installation Instructions. You will need to follow the guide line! It is important to properly work all the functions!

  In addition, you will need to select the right OS. There are two: XP and XP MCE.

  To control buttons Toshiba works correctly, you will need to install the controls.
  But as I said above: follow the instructions in the insulation.

  A few words on the TV tuner:
  As far as I know, you can only use the TV tuner in the country where the laptop was purchased because different PAN and NTSC settings.
  In addition, the TV tuner driver offers TV tuning and recording capabilities using Media Center on your computer. If you have any MCE so I put t know how you want to watch TV.

• Command + Option + P + R keys do not work

  Hello world

  I have a 2 models of macbook pro 2010. When I first got them I gave each a password firmware, but for some strange reason, one of them the password does not work! So I need to reset it. I read the forums where it says to remove 1 stick of RAM (fact), reset the SMC (which is), then hold down COMMAND + OPTION + P + R hown to reset the PRAM.

  Problem is to keep these keys does nothing. The macbook starts just to the top as usual. GRRR! It's infuriating! I've tried everything. I also met several other MacBook & macbook pro in the past when he had the chip of ram only 1 I tried to case.have, 2 chips of RAM, Exchange autour, new ram, and 3 other different types of RAM, still the same problem. I have 2 x 2 GB ddr3 1333 mhz in there. I tried chips to 4 gb and 8 gb chips as well. Why the these keys are not suitable? I just don't understand and it's very frustrating because it works just fine on the other macbook pro and the specification and even the model is exactly the same thing...

  I know that the keyboard is OK because the holding CONTROL + OPTION + SHIFT and the power button to do an SMC reset works very well. and Yes, I tried to connect a wired usb macintosh keyboard. These keys do not work either and I know that the keyboard is fine because it works on the imac. I find it confusing that google has no answer for that, surely someone else has had this problem?

  You can reset PRAM with Terminal too: http://osxdaily.com/2015/12/16/view-clear-nvram-mac-command-line-osx/

• Satellite L670 Fn keys do not work after the upgrade to Windows 10

  Hello

  I ve upgraded my Win7 L670 to Win10. After upgrade do not work key Fn. is it possible to recover the functionality of these buttons in Windows 10.

  Wolfgang

  Hello

  Each cell function requires special tools and utilities.
  In the case of FN keys, Toshiba software controls this feature.

  But as far as I know that the Satellite L670 won't get any utility Windows 10 so probably this key will not work running Win 10.

  Here the details on the 10 Windows upgrade:
  https://Forum.Toshiba.EU/showthread.php?83832

• NB305-105 - FN keys do not work after installing Windows 7

  Hello

  I'm trying to install Windows 7 64 bit ultimate in netbook Toshiba NB305-105, I have install all drivers, but I can't solve the problem with the WIFI. In particular I don't found drivers for the special key FN to switch on the WIRELESS card.
  I tried different retraction, but nothing. All the drivers are installed but the FN key does not work and even for the WiFi card.

  Please help me or I come to Windows 7 32 bit?

  Thank you

  Hey,.

  You can keep Windows 7 64 bit installed, but I put t understand why you need 64-bit OS on a netbook that doesn't support 4 GB of RAM

  In any case, the FN keys to install the package of added value and utility to Support Flash Cards. These two tools controls the FN keys. They are not listed for your netbook and Windows 7 64-bit, you can download them from another model as Satellite L500.

  I'm pretty sure, they have too much work for your model. :)

• FN key does not work on the satellite L745

  yesterday, I uninstall almost all toshiba prog and then my FN key does not work!
  Please help me this laptop is only a week

  Hello

  Install the VAP (value added package) and reboot the laptop.

  Then install the Support Flash Card utility and reboot once more.
  Then test the Fn keys.

  The buttons are controlled by Flash cards, so you should be able to use the buttons after a new installation of this app.

• Satellite Pro L300 some FN keys do not work on XP

  I bought a L300-164 on Monday. However, there is no preinstalled opsys. I installed a Win XPSP2 (HUN) on it and downloaded the drivers from www.toshiba-europe.com.

  First I have installed chipset and video drivers, then I installed "common Modules". After you finished and restart I tried to install 'orders', but who says "common modules" are not installed.

  So I installed 'save energy' and tried to install it once more the 'controls '. Now, it has been installed normally. Finally, I put on "hotkey utility" and "touchpad utility power. So everything seems to be all right on the machine, but a few FN keys do not work: F6 and F7 doesn't control brightness, F2 is not change power mode and F9 switch touchpad power (of course in a hurry with the FN). However, volume knob works, ESC as the work of mute and Fx buttons also work elsewhere.

  Y at - it ideas to make these buttons work?

  Sat L300-164 seems to belong to the PSLBDE series, and you must download and use the drivers from the Toshiba European designed for the series Sat L300 PSLBDE page.

  Is the common Modules is a key driver that is important for the functionality of the FN button.

  I would recommend so reinstall the common modules again!

  Welcome them

• Re: satellite C660-26Z: FN keys do not work after installing Win7

  I have a SATELLITE C660-26Z after format and reinstall a new version of windows that my function keys do not work.

  However they work until I connect and then they don't work on any account I can accidentally extinguished they if so is it possible to reactivate them? FN and the keys 1-4 works but the Fn Esc all the way to F9 keys do not work any ideas?

  Thank you

  Ben

  p.s. I have Toshiba value added package

  Hello

  You must install VAP and Flash memory card Support utility.
  The utility of Flash Cards control the FN keys.

  Install and test again

• FN key is not working properly on my Satellite P875 - 32H

  Hello world

  I have problem like many others, FN key is not working properly. Let's start from beginning:

  1. I bought my P875 - 32 H with Win8 64 bit and everything was allright.
  2. after upgrade to 8.1 probles issued many and most of them I solved it, BUT,
  3 recently, I found that the FN key works in combination with
  (a) f5
  (b) f6, f8 (only with media player works, with winamp does not work).
  (c) f12 (I turned off wifi via Control Panel, but the light still flashes),.
  (d) 1 and 2
  (e) or z (US keybord) - keyboard backligth on/off - I have try several solutions based on the forums (install the driver on toshiba support site) but without success. Throught BIOS I turn on backligth but I can not turn off without entering the BIOS.
  (f) space I've ever used this combination.

  I tried on the Microsoft forums, but there is no solutions.

  And another question
  Why my P875 - 32H model is not on the drop-down list on the toshiba support site?

  Concerning

  At first, I have to say that I hope that you have updated your machine following the instructions on http://www.toshiba.eu/innovation/generic/windows8_1-message/
  FN feature keys is controlled by specific tools Toshiba and you need to install or already installed are Toshiba system driver and utility of Toshiba feature key.

  FN + F5 key combination is for touchpad. Did you install driver touchpad correct?
  F6 and F8 are designed to work with media player. In the past (WXP) using small plug-in, it was possible to use it for Winamp. I think that something like that doesn't exist anymore.

  You know that's not easy to say to install this or that and everything will be OK. The feature keys FN is where several things work together.

  Please check the download page of Toshiba on http://www.toshiba.eu/innovation/download_drivers_bios.jsp and install all necessary drivers, tools and utilities for Win8.1.

• My shift key does not work on my MacBook Pro

  My shift key does not work on my MacBook Pro. Can I use capital letters but only if I click on change and it's annoying. When I click on the passage icon shift comes at the top right of my screen to show its on but when I click on the lock button nothing happens as it used to glow green when I clicked it. Before someone says go to the system preferences and go to the modifier keys and restore them or make sure caps lock shift is on lock shift, I've tried that already, I looked it upward and found nothing similar. Help ASAP would be appreciated because it is really annoying

  Hello Gracepullan1,

  I understand that shift key of your MacBook Pro does not respond as before. Fortunately the steps below can help to restore the functionality of the SHIFT key on your Mac.

  1. In the Apple menu, choose System Preferences.
  2. On the view menu, choose the speech.
  3. Click on the text to Speech tab.
  4. If "Text Speak selected when you press the button" is enabled, the key or combination of keys set to read the text cannot be used for other purposes, or used for typing text - click on set the key and replace it with a less commonly used key combination (try using the modifier such as SHIFT keys, command) Option and control). Or disable the option "Read the selected text when the key is pressed".
  5. Click the accessibility pane or universal access in system preferences, and then click the keyboard tab.
  6. Make sure the slow keys is off. With slow keys on, you must press a key for a longer period of time so he can be recognized.
  7. In the accessibility pane or universal access, click the mouse and make sure mouse keys is turned off. With the active mouse buttons, you cannot use the numeric keypad to enter numbers - instead the keypad moves the pointer (cursor). (There is an option to activate the MouseKeys to five presses down option, you can disable this option to avoid accidentally activate it.) If the mouse keys is enabled and you are using a keyboard without the numeric keypad or Num Lock function, see Impossible to type while mouse keys is enabled in Mac OS X.
  8. If the function keys on the top row of the keyboard do not work as expected, see Mac OS x: how to change the behavior of the function keys.
  9. If the problem persists, use the keyboard Viewer to help isolate the problem:
     1. Click the component language & text (Mac OS X v10.6) or international (Mac OS X 10.5.8 or earlier) in system preferences.
     2. Click on the tab Input Sources (or tab Menu entry under Mac OS X 10.5.8 or earlier version).
     3. Click on the keyboard and the characters 'On' box Viewer checkbox to select (click on the viewer of keyboard "On" checkbox under Mac OS X 10.5.8 or earlier).
     4. In the entry menu (flag), choose Show Keyboard Viewer.

  
  

• If the keyboard is connected and detected by OS X, the keys you type will highlight in the keyboard Viewer window. Open TextEdit (or any text application) and try to type something using the keys that failed before to see if they highlight in the keyboard Viewer.
• Start up from the Mac OS X installation disc, choose Terminal from the utilities menu and test buttons that did not previously.  If the keys work while started from the install disc, the keyboard works correctly.  How to solve a problem of software allows to isolate the software problem that may be causing the keys to not answer.

One or more keys on the keyboard do not respond
https://support.Apple.com/en-us/HT203162

Sincerely