TV tuner card does not not on Media Center pc m1050y

Similar Questions

• Satellite L100: Wireless network card does not recognize media

  I bought a Wifi (Gigabyte gn-wi01gs) to my L100, but this card does not work. I installed all the drivers, but it does not recognize any network. No other computer has a problem.

  This shows that, when I press Fn + F8 "wireless communication is disabled. Please activate the wireless communication switch "." What 'switch '? There is no switch!
  What should I do?

  Someone mentioned here in the forum that with the version of the BIOS under 2.10, the Wireless LAN card is unable to get a correct IP address of the connected Access Point or it is impossible to get a connection point of access to all.
  Added the new BIOS that fixed a problem with the wireless LAN switch kill, the switch did not work properly.
  WLAN should be activated by pressing FN + F8.

  So please update the BIOS to Version 2.10 or higher, but don't forget to use the good BIOS and the correct procedure of updating the BIOS!
  Incorrect BIOS may damage the motherboard.

• GADMEI USB TV Tuner card does not work on the new Windows 7 computer

  Original title: usb tv card is not supported in windows 7 x 64

  Hello

  I have new office... everything works fine, the problem is with my tv usb card.

  I tried gadmei model utv882e and utv332e... no one works with my office... but in my laptop with the same version of windows, two tv cards works very well.

  I have no other problems in my pc or tv... cards all drivers are up to date.

  Here is my desktop specs:

  model of motherboard is asus b85m-k

  

  

  Hello Faysal,

  Thank you for visiting Microsoft Community.

  As described in the question, I understand that your two cards of Gadmei USB TV Tuner does not work on your Windows 7 desktop. The same card works fine on another computer in Windows 7 with the same configuration.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. What happens when you plug-in card TV Tuner? Your computer will detect the device? Do you have a code or a message when it fails to connect?
  2. Did you check connecting them via a different USB port?

  There may be a possibility that drivers for Gadmei TV sticks are not correctly installed on the computer. We will try these methods below and check if that helps.

  Method 1:

  First of all, I suggest you to run the following Microsoft Fixit to get the problem diagnosed and fixed automatically.

  Hardware devices do not work or are not detected in Windows

  http://Support2.Microsoft.com/mats/hardware_device_problems?WA=wsignin1.0

  Method 2:

  If the fixit above does not resolve the problem, I suggest to download the best compatible driver on the device manufacturer (Gadmei) site or contact Gadmei to get the best driver for your computer and install it.

  You can also read the article below to help update the device driver.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps. Please let us know the results. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• Netflix appearing does not in media center on windows 7 ultimate 64-bit edition

  I have windows 7 Ultimate 64-bit.  I try to get the netflix option if displayed in Media Center, but do not have a chance.  I ran the command prompt commands to try to make it work that I found on the internet (http://support.microsoft.com/kb/972496).  I tried also deselect the media library and it has been uninstalled and I reinstalled it now.  Still no luck.  What other options do I have? Shannon Ramirez

  Netflix is not released for Windows 7 and yet you should see it appear around the 22nd.  If you have installed the netflix for vista you'll want to uninstall.

• Hybrid Analog/DVB-T card does not work - Qosmio F50

  Hybrid Analog/DVB-T card does not (Windows Vista Home Premium).

  Channel zero came after scanning with Media Center. Sent to the hardware engineers.
  Tha card has been tested in a "fresh load of Windows" and worked well.

  It was suggested to clean and reload Windows.
  I made and tested with and without having to download Service Pack 1. Still does not work. Driver has also been updated (2.3.3.21).

  Any suggestions?

  Thank you

  Hello

  First of all, you should test the portable DVB - T with Toshiba s card preinstalled Vista.
  Everything has been set up and should work fine

  I think that it s not Analog/DVB-T Hybrid card problem.

  Maybe the DVB - T signal is too weak and therefore you do not find the TV channels using this card.

  In my country and the region, the DVB - T signal is really weak and I need a DVB - T antenna to receive the signal and the channels!

• missing a few previously purchased songs (!)  and i-tunes helper does not

  I keep getting errors during a new playlist, saying "file not found".      So I tried the recommended - diagnostic tests that shows "I-tune helper does not ' is the two partners?   How can I find the missing music and recover my account?

  I don't think the two are connected. I'm really not sure what the role of iTunes Helper, but a proposal that's what launches iTunes when you connect your devices, if you have this option enabled.

  The "missing file" error occurs if the file is no longer where iTunes is expected to find. Causes possible is that you or a third-party tool has moved, renamed or deleted the file, one of its parent folders, or the reader, he feeds has been a change to the drive letter. It is also possible that iTunes has changed from waiting for the files in the presentation of pre-iTunes 9 post-iTunes 9 layout, or vice versa, and so looking for a bit in the wrong place.

  Select a track with an exclamation point, use Ctrl - I to get the information, and then click No when asked to try to locate the track. (Because of a bug in iTunes 12 you currently have to say no twice!) Look under the Summary tab for the location that iTunes thinks that the file should be. Now look around your hard drive. I hope you can locate the track in question. If a part of your library has just been moved, renamed a folder or a drive letter has changed, it should be possible to reverse actions. If the difference between the two railroads is an additional music directory in a path, then it is a problem of layout. I can explain more if this is the case. If everything is where it is supposed to be trying to fix the security permissions for iTunes for Windows.

  In some cases, iTunes may be able to repair itself if you go through the same steps with Get Info, but this time, click on search and browse the lost track. He peut then offers to try to automatically correct the other broken links. Although he said something like 'use the same location' I think he expects to find the titles in the same layout artist & album that they were before, with a systematic change to the path.

  If another application like Windows Media Player has moved/renamed files then the chances are that subtle differences in naming strategies will make it difficult to restore media on the precise way that iTunes is expected. In this case, as long as the missing files somewhere, you should be able to use my FindTracks script for reconnecting to iTunes. See this post for an explanation of how it works.

  If you want me to try to provide specific advice, please post back the following details:

  1. The location of the media file under Edit > Preferences > advanced
  2. The location of a sample of missing follow indicated under Get Info > file > location which begins file://localhost/
  3. The real path to the file which you gave 2 details.

  TT2

• Graphics card does not support the required version of DirectX 9.0

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  =========================================
  It may be interesting to try to go to support
  site Web of MFG. your video card and
  search for course Windows XP Compatible
  drivers.

  (FWIW... If your computer is a laptop... check
  the manufacturer of the comput4er one
  updated video driver)

  If you do not know the make and model of
  your video card... check documentation
  supplied with the computer.

  Also, you can try the following steps...
  Reach... Start / run... type...
  Msinfo32... Press on enter.

  On screen Information System... Choose...
  Components / display...

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. Also, you should find
  and follow the installation instructions on the
  support site. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord...

  Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord... He lost. :/

  The following steps may be worth a try:

  Insert your memory card into your Media Player...

  Reach... Start / computer...

  What is the memory card show as a drive letter? (if your Media Player)
  has several slots, there will be several "hard drives" listed... the
  SD card will be one of them)

  If_Yes_right click on the drive letter correct and in the menu... Choose...
  Open... now you should see the directory of the memory card or to explore.

  From there you should be able to drag and drop or copy and paste the
  files in a folder on your hard drive.

  Also... the following items may be worth a visit:

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

• Graphics card does not work on the Satellite L850 PSKFWA

  Hello

  I have a Satellite XC 250895 Q. Windows 8 keeps giving me a message that my graphics card does not work correctly.
  I go to the Radeon website and click on the appropriate boxes and let Radeon check my system to see if the drivers are up to date. He tells me that I have to download something (?) New driver) but when I do it tells me there is a problem with the compatibility with my system.

  I haven't noticed any problem with the graphics.
  It may be a Radeon problem, but what I have on my system, which was installed at the factory.

  Thanks for everything back
  Hetty

  + The message was edited: model nr. Add the object +.

  Can you please tell us once more what model of laptop you have exactly?
  Are you using the original Win8 preinstalled?

• Wireless network card does not appear in the Device Manager on Satellite L50 - B - 1 DM

  Hello!
  I bought just new Satellite L50 - B - 1 DM, model number PSKTCE and installed on Windows 7 Professional SP1 64 bit. He came without OS installed and without driver installation disk.
  Problem is that Wlan card does not appear in Device Manager.

  For my Toshiba support model are 37 drivers and programs. I have already installed: Windows 7 Professional 64-bit, all updates to Windows that appeared, SP 1, driver LAN, Toshiba Value added Package. And I tried to install all wlan drivers 4 in the list of "tool utility Intel ' also.
  Does not always display any connection without wireless WLAN card. Pressing Fn + F12 does not change. In "Network connections" is the only connection - LAN. No WLAN, no bluetooth.

  I have "Other devices" in Device Manager with yellow marks on: network controller; PCI device; PCI Simple Communication controller; SM Bus controller. USB controller; Unknown device (with Microsoft ACPI - compliant system location) and video controller.

  Any help would be welcome. Thanks in advance

  If it's not bad - just saw that my BIOS is version 1.70

• Satellite 5000 with Windows XP, Service Pack 1 is installed and now my sound card does not work

  Everyone knows this problem.

  I have a 5000 Satellite with Windows XP. I installed SP1 and now my sound card does not work.

  Any ideas out there?

  Does anyone have this problem?

  I reinstalled the Yamaha drive a couple of times and always the same: no sound?

  I bought this unit in Holland and it was great until the problem of Service Pack. I heard that Comcom was a dealer right here. Maybe I'll have to make to them, if I can't help here?

• P20-552: 2 GB SD card does not work.

  I have a P20-552 (PSP26E-025E9-S4), which is about 18 months old. I recently bought a digital camera (IxUS 750) barrel with a 2 GB Sandisk Ultra II SD card and the combination does not work well. Although I can transfer images from the camera to my Toshiba laptop with a USB cable, sometimes, I would use the SD slot on the laptop, but there seems to be a problem: seconds after pressing home the SD card in the slot, I get the message "disk is not formatted - do you want to format it now?". I said OK but then I get the message "cannot be formatted disk in drive E".

  The card continues to work perfectly fine in my camera and on my iPaq Pocket PC. In the Toshiba SD card works quite happy with Sandisk card of 256 MB SD, which is usually in my PDA.

  Anyone has an idea why the 2 GB card does not work in the Toshiba? It's updating a driver - I watch the other day but I couldn't find anything that seemed appropriate, but I might well have forgotten something...

  I'm running XP Home Edition (SP2) and are automatic updates IT. I have Norton Virus and Zone Alarm running and have no problems with other software/applications - at least, no problem, as someone suggested to suck my laptop overheating a few weeks ago ;-)

  Thank you, Brian.

  It seems that the unit doesn t support this card.
  See your user manual. You will find an information that this device supports only the following SD card formats: Mo 8/16/32/64/128/256 and 512

  According to this document, the 2 GB are high.

• Sound card does not work after upgrade to XP Pro

  I need help - Microsoft participated three times without result. After that I updated to XP pro that my SigmaTel C Major sound card does not work. Done all the usual uninstall the driver, update driver etc. No results. When I go into the properties of audio devices, midi and mixer IE driver I see a status message: active but device not started

  Any ideas on how to solve it is greatly appreciated.

  Hello

  Sorry but I have no explanation for this. I can recommend you to remove the sound card in Device Manager, then restart the unit. After reboot, the sound card must be recognized and installed properly.

  It will be interesting to know what model of laptop you have.

• HP2310i: New (ASUS GEForce GTX 750Ti) graphics card does not not on HP 2310i

  Hi all

  Help, please! I can't get my new graphix card to work with my HP 2310i :-(

  Basic unit of HP: Pavilion

  Model: p6320uk i5 CPU 3 .2GHz

  RAM: 6 GB

  Screen: HP 2310i

  Windows: 7 (64-bit)

  Card: ASUS GEForce GTX 750Ti

  I swapped the old card and put in the new (I know what I'm doing with this as much before). Connect the plug of the correct video adapter for the graphics card is: DVD-D/VGA. Everything turns on and all I get is...

  DVI: NO SIGNAL

  VGA: NO SIGNAL

  I can't add the new GEForce drivers from the disk because it needs the map in situ.

  What Miss me? What can I do? I am doing something stupid?

  Help! :-D

  Thanks Jowler

  Jowler, welcome to the forum.

  You have shown two different models in your thread.  I used the p6329uk.  The reason that the video card does not work is that it requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released on January 15, 2010.  Therefore, the GTX 750ti will not work.  The last series of video cards that does not need UEFI was 640 gt.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Satellite A200-1VM - SD card does not work

  SD card does not start.
  I already have SP1 and in Device Manager SD card appears with "!" when a card is inserted and is not, when it's empty.
  When I insert a card inside it says does not start code 10 but I see the led blink whenever I put a card inside.

  Can anyone help?

  Error code 10 said that the SD card driver was not installed correctly or device couldn t load the driver.

  In any case, you should definitely try to reinstall the driver from SD card.
  First go to Device Manager and uninstall the old drivers.
  Then install the driver again, downloaded from the page of European driver of Toshiba.

  Finally, restart the laptop and try again!

  Good luck