TWAIN with Officejet 6700 problem - cannot open TWAIN device default

Similar Questions

• Installation of Mac with Officejet 6700 problems

  I try to install the disk that came with my Officejet 6700 and he tells me that it can't open because it works on the OS 10.7 or below, and I OS 10.8.2.  Y at - it somewhere that I can download a new version of the material so that it will be compatible with my printer?

  Hello

  Download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107209-1&cc=us&DLC=en&LC=en&OS=219&product=5058338&sw_lang=

  Don't forget to select HP Software recommended when installing to get full functionality.

  Finally, after completing the installation, restart your Mac and run the software update to ensure that your drivers are up-to-date.

  Shlomi

• iOS 10.0.2 problem cannot open notes

  iOS 10.0.2 problem cannot open notes

  Since the update to ios 10.0.2 week last on my 5s just notes iPhone keep crashing. Anyone got a fix?

• Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - problem: cannot tab field one entry to another; Hit the tab hides instead all pallets; Is there a solution? It didn't happen in Adobe Indesign CC

  Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - problem: cannot tab field one entry to another; Hit the tab hides instead all pallets; Is there a solution? It didn't happen in Adobe Indesign CC

  This should be corrected in the next version.

• Cannot open mci device

  I get this same message in a window pop up. If not removed the pop-up boxes just keep piling up on the screen, IE;

  "Cannot open mci device. Error code: 348745 "

  Please notify

  Thank you

  Leonard

  Hi Bellfeather,

  ·          Did you the latest changes on the computer?

  ·          When was the last time it was working fine?

  ·          When you receive the error message?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Cannot open SCSI device ' devices/vmfs/genscsi / vmhba3:5:0:0 '(scsi3:0): the file is not found. Cannot configure scsi3.

  Cannot open SCSI device ' devices/vmfs/genscsi / vmhba3:5:0:0 '(scsi3:0): the file is not found. Cannot configure scsi3.

  I get this error when you add a new SCSI device to one of my Virtual Machines, the device is a tape drive HP SureStore DAT40. The error occurs when the virtual machine is running, around 60% powerup.

  I tried two types of SCSI cards, a "Adaptec 29160N" & a "Adaptec 29160LP" and two different cables, I get the same error with both. The ESX 3i 3.5.0 host to see two SCSI cards when checking under Configuration and then to storage adapters. When you click the SCSI card in the adapters of ESXi storage options, I see the tape drive listed as vmhba3:5:0 for the band and vmhba3:5:1 for the media changer. This makes me believe that, from the point of view compatibility, everything is good to go.

  When I change the instance of VM to add the tape drive, I select new SCSI device which passes next to select the SCSI device in the options, I see HP - HP and media - bands like peripheral parts possible. I tried a variety of virtual device nodes and they all produce the same error that has been pasted above. When ok is clicked it adds the new SCSI device and a new SCSI Controller 1 using the LSI Logic Controller, I also tried all the options under this menu, 'None', 'Virtual' 'Physical' and I have even changed the Type of controller BusLogic, same results even if I get the error posted above.

  The server in question is a Dell PowerEdge 2850, 2 x 3 GHz CPU, 8 GB of RAM, 300 + GB HD.

  I searched the net and these forums and did not find any post about the error posted above, I have some hair left on my head and I don't know what to do at this point. What is a compatibility issue? I tried to add the SCSI device on another virtual computer on the same ESXi host and it gives me the same error. I know the tape drive, scsi cards, and two scsi cables, I am using all work correctly.

  Any ideas?

  Hello vango333!

  Please try this.

  VMware Infrastructure Client

  1. 'Configuration'-> 'Storage'-> select target storage

  2. Please download * target VM *.vmx

  Edit the vmx file

  1. Edit *.vmx (wordpad, etc...)
     (Front)
     scsi0:1.present = 'true '.
     scsi0:1.DeviceType = "scsi-passthru.
     scsi0:1.filename = ' / vmfs/devices/genscsi / vmhba3:5:0:0. "
     scsi0:1.allowGuestConnectionControl = "false".
     (After)
     scsi0:1.present = 'true '.
     scsi0:1.DeviceType = "scsi-passthru.
                     scsi0:1.filename = ' / vmfs/devices/genscsi / vmhba3:5:0. 
     scsi0:1.allowGuestConnectionControl = "false".

  2. Download * *.vmx

  VMware Infrastructure Client

  ' Power On ' target VM

  It ends in the present.

  Good luck!!

• OfficeJet 6700 Installation - error opening Installation log file

  Try to install the software for OfficeJet 6700.  All - tried delete reg keys, copy sw HD, download new drivers and run as administrator.  Have Win7 64 bit Professional OS. Windows doesn't have the driver get same error every time. "Error opening installation log file.  Verify that the specified log file location exists and that you can write to it. "Am about to return this article to Costco.  It can't be this hard!  What is the answer?

  Hey everyone - I finally understand how to solve this problem!  As they say, it's always the last place you are looking for!  All joking aside, this is how I did it.

  The problem is that HP setup.exe does not seem to be compatible with Windows 7 Professional 64-bit.  So, in short, the solution is to run the installer in compatibility mode Windows XP SP2.

  1. open computer and navigate to the Setup CD.

  2. do not Autorun or auto play installation.

  3. click right one open the CD from the computer.

  4 scroll down on the list of files on the CD until you see Setup with the HP logo next to it.

  5 right-click the program installation and in the context menu, select 'Troubleshoot compatibllty '.

  6. the resolution of the problems should open.  Select "try recommended settings.

  7. then, the troubleshooter should say it's solve problems and give you a button "Start the Program".  Click this button and the installation program should start normally.

  8. from here before the installation should work normally.  Although normal is sometimes nothing more than a laundry dryer set!

  My system is Windows 7 Professional 64 bit.  This kind of issue that happened to me in the past with other software installations, but I've never waited or he waits with a new HP printer!

  Thanks to the HP support people I talked about this during the last few days.  It is certainly something that should be documented. I hope that this article here will help others.  Let me know if it helps you!

• Printing for Officejet 6700 problems

  Recently I struggled to print the word document.  I worked about 3-4 days ago.

  I have windows XP with MS Word 2010.  Printing is HP Officejet 6700 Premium.  I always use it offline.  It is connected to the computer via the LPT connector.

  The test page is printed.  But the word document does not work.  I also tried the computer laptop and excel documents, and I have the same problem.

  I know it's something very simple (at least I feel like that) bit is very annoying when you need something printed.

  Please help me or direct me to request additional assistance.  Thank you.

  JCM

  Take a look at this link for the print queue.

• OfficeJet 6700 problem - impossible double-sided A5

  Hello

  I bought a HP OfficeJet 6700 Premium and I want A5 double sided cards but I can't do.

  If I put the page by default A5 and nec print on both sides, either short or long the coast, I get an error on 'conflicting settings. Print on both sides works no problem for A4.

  I had a quick glance in the manual and it says it does duplex for A5. I installed the latest all-in-one driver and firmware.

  Is there something obvious that I'm missing? Do I need a specific tray (just take the bac A4) or duplexer?

  Any help appreciated,

  Patrick

  Patrick, I've reproduced that you do it myself and found that you have reason, manual, in this case has incorrect information. I'll be sure that information is shared with the appropriate people to verify this. For A5 paper, with duplex, the only right now available option is manual.

  However, I will also check the regional settings and see if the metric of this document type of conflict with the region including the printer is zoned for. As a follow-up, where was the printer purchased and where are you now?

  Let me know!

• XP, Windows Media Player tries to open each file and responds with, "windows media player cannot open the file.

  I can't even go to open, ' Change / Remove Programs "Control Panel. Same shortcuts on my desktop are not open without WMP trying to open the first file. Why is it in the middle of everything? How can I disable WMP or stop trying to open all files, media files that are not same? There version of WMP 9, but when I try to download a newer version, it won't work because WMP keeps popping up, saying: it cannot open the file.

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the article mentioned below and check if the problem persists.

  Windows Media Player invalid file Error Message Format

  Hope this information helps.

• Scan to network with OfficeJet 6700 Premium

  Hello

  I want to scan from my OfficeJet 6700 Premium on a network share on my NAS.

  So far I was only able to scan my computer where I needed to install a pice of software. But I want to scan directly to the network share without count it in the middle.

  Thank you

  Mark

  Hello B7i,

  Welcome to the Forums of HP Support! I understand you want to scan to a shared folder (SIN) with your HP Officejet 6700 Premium. After watching the 6700 product specifications, this isn't one of the characteristics of the 6700 JO scanning, scanning capabilities include scanning to USB and PC key only:

  

  That being said, you need to use the computer. Have a look here in your user's Guide on Page 38, it gives you all the scan options.

  I'm sure you already know what options you have in the front of the 6700 but for later use, I'll leave that for you: the façade scanning options

  I hope this helps!

  Thank you

• display the banner with officejet 6700

  I am trying to print on paper 8.5 x 28 inches on my Officejet 6700 Premium. I can't find a "banner" - size of page anywhere. And cannot do a 'custom' page longer than 22 inches.

  Thank you

  Hello

  The following is a list of all supported media formats:

  Supported media formats A4, A5, A6, B5 (JIS), 6 x 8 in., Executive, card 3 x 5 in, plug 4 x 6 in, sheet 5 x 8 in, A4, letter, 3 x 5, 4 x 6, 5 x 7 in., 13 x 18 cm, 8 x 10, 10 x 15 cm, L do, care Photo 2 L, 8.5 x 13 in, legal, letter , statement, O * beep * u Hagaki, Japanese postcard, envelope #10, envelope C5, envelope C6, envelope DL; Monarch envelope, card envelope 4.4 x 6 en, JIS #3 cabbage, cabbage #4 JIS   types of media plain paper, thick paper, bright white paper HP, HP Premium paper presentation, Matte, HP Premium Plus Photo paper, other inkjet papers Photo HP Advanced, HP Everyday Photo Paper, Matte, HP Everyday Photo Paper, photo paper glossy, other, other special papers , other greeting cards, paper Brochure HP, 180 g, ice, HP Brochure and flyer, Matte, HP Tri-fold Brochure paper, Matte, HP Tri-fold Brochure paper, brochure paper, glossy, other, ordinary hagaki, hagaki inkjet paper, card stock   media, recommended 60 to 105 g/m² (plain); 220 to 280 g/m² (photo); 75 to 90 g/m² (envelope); 163 to 200 g/m² (map)

  Source: http://www8.hp.com/au/en/products/printers/product-detail.html?oid=4323624#! = form tab

  I hope this helps.

  Kind regards.

• I have Photoshop elements 12, I just bought the new Canon 5 d with 50mp a Photoshop cannot open the Raw file what should I do for PS 12 can open the file Raw 50mp

  I have photoshop elements 12 and I just buy Canon 5 d with 50 MP and Photoshop cannot open the 50mp RAw file I get an error message, I can fix PES 12 so it can open the big Raw files

  You need a version of Camera Raw of 9.0 or higher and Photoshop elements 12 will not manage that. You need to get the free DNG Converter, convert your DNG files, before you can open the items.

  Adobe - Adobe Camera Raw and DNG Converter: for Windows

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh

• OfficeJet 6700 Premium - how to set the default print quality of 'normal' of the "draft."

  Hello

  Thank you for your help.

  I have a printer/all-in-one Officejet 6700 Premium.

  Most of the documents that I print is for internal purposes, so "Draft" quality is sufficient.

  The default factory on the print quality setting is 'Normal '. I know how manually enter and restore the "draft", but I'd rather have the defaultproject, so I have to reset it manually each time.

  I could not find how to permanently fix the draft quality defect.

  Again, thank you for your help.

  George Mathis

  Thanks George,

  which is fully answering my question indeed

  Please follow the steps below to change the quality of the printer:

  1. Click the Start button.
  2. In the menu, click devices and printers.
  3. Right click on the HP Officejet 6700 icon.
  4. Click Printing Preferences.
  5. Enter the tab paper / quality .
  6. Select the project in the area of quality parameters.
  7. Click OK to save the settings.

  Now any future printing will be in draft quality.

  Kind regards

  Shlomi

• I have ElCapitan10.11.5 of OSX.  PC send me attachments with "winmail.dat." Cannot open them. Support article sent Apple say PC what to change.  Why Apple can't make the necessary changes to receive these attachments?

  ElCapitan OSX 10.11.5. impossible opening "winmail.dat" attachments PC sending

  Apple says sender PC what to change.  Why Apple cannot make changes?

  Because the problem of side PC Mail configuration and is a matter of administration Windows mail server, not a problem in Mail OS X I have received emails with Apple Mail to those who use Outlook without any trace of winmail.dat attachment problems.

  You can get the TNEF free enough ask OS X App store that allows you to view these attachments until the administrator of Windows Mail comes out of his coma.