Twitter: Failed to authenticate with OAuth.

Similar Questions

• Problem with the password suddenly failing to authenticate with MSN

  Hello. I use Thunderbird version 24.5.0. on a Windows Vista operating system.
  I use a pop framework to connect to my email.

  My problem is when I try to check my e-mail MSN.com of Thunderbird account, I get the error message:

  "Sending of password did not succeed. Mail server pop3.live.com responded: authentication failed"
  

  This just started happening earlier today after having worked well for a very long time. I tried a number of things to solve this problem, including empty them the saved passwords, then reset my password on MSN and then to try the new password and nothing did. If I connect directly from the web browser on e-mail MSN account, it works fine. As far as I can see the password and user name that matches the full email address is entered correctly. Thanks for any help!

  OK I solved the problem.

  I looked through all the account settings hotmail/msn and found the so-called step 2 audit was active on the account. I do not remember to activate but I disabled it and everything works fine now.

  Here is some info on step 2 check and mail apps:

  http://Windows.Microsoft.com/en-CA/Windows/two-step-verification-FAQ

• All sites https fails to load with an invalid certificate

  I bought a new computer, I freshly installed 14 Firefox on Windows 7 (64-bit) and all https sites fails to load, with various failures of security certificate. Gmail, for example, does not charge for this reason:"accounts.google.com uses an invalid security certificate. The certificate is not reliable because no issuer channel was provided. »... Even after the addition of a manual control. My Bank Web site does not open because the serial number is used on another certificate... etc etc.

  I tried all the most commonly recommended solutions - cert8.db removal uninstall Firefox, creating new profiles, copy on the old PC profile, create a new profile under a new user... Nothing seems to have no effect. I tried Firefox 14 and 15 (beta), charges both installs. I tried to disable my antivirus and firewall (ESET).

  I'm out of ideas. Chrome and IE work without any problem. All other computers on the home network even behind the same router have Firefoxes that work very well.

  What security (firewall, antivirus) software do you have?

  Some security software intercepts them secure connections and sends its own certificate.

  Some examples are ESET and Bitdefender.

  • ESET setup-> Advanced Configuration-> expand web and email-> SSL shaft
  • SSL protocol: do not scan SSL protocol
  • BitDefender-> privacy-> settings disable SSL Scan

• To authenticate with Kerberos for TimeMachine on OSX Server

  Hello

  Someone has an idea, how I can use Kerberos to authenticate with the TimeMachine service hosted by a server OSX?

  We use Mac clients in an Active Directory environment. Rules of procedure requires users to change their password after a few weeks. The problem: advertising knows the password, so the OSX Server knows the password, but the customers still have the old password stored in the keychain. So they try to connect to the service time machine with the old and evil, and that powers won't work. With Kerberos, this could be resolved.

  Any ideas?

  We use Mac OS X on the clients and server OSX 5.0.15 10.11.2

  Thank you!

  How to set up Time Machine?  System preferences or via a Configuration profile?  I'm guessing the system preferences.

  Try this command on one of your customers:

  tmutil destinationinfo

  If the value of the URL looks like this:

  AFP://user@host._afpovertcp._tcp.local./TM_Staff/

  Then you connect using Hello and so you're outside the Kerberos realm.  You can try to change the destination of a fully qualified host name or use configuration profiles.  What is the server bound to AD?

  Reid

  Apple Consultants Network

  'El Capitan Server - Foundation Services.

  «El Capitan Server - Collaboration & control»

  'El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store

• Multisim update fails to install with error.

  The regular update fails to install with error: an error occurred in the installation of an update.  If this error persists contact technical support OR.  It comes to Multisim.

  How can this be repaired?

  Thank you

  Multisim is different to the discussion forum... Please post there is http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/bd-p/370

  It will help you get a better answer...

  Best regards

  H S

• I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• KB963671 update continually fails to install with error 80070652

  I have a HP Pavilion dv6000 laptop under Microsoft Vista Home Premium (32 bit).  My Windows Update is configured to be installed automatically, but there is an article that fails to install every day.  The update by using the Microsoft Script Editor (KB963671) fails to install with error 80070652 code.  I read this error code indicates failure prerequisite installation/update, but I don't remember that ever happening.  When I run Office Diagnostics, everything comes out very well.  I searched the Microsoft discussion groups and communities, but have not been able to discover a solution.  Any help or insight would be greatly appreciated.  Thanking you in advance for your help.

  -Vince

  Hi U07348,

  Have you tried to install the update as a stand alone.
  Here is the link to download the update by itself.
  http://support.Microsoft.com/kb/963671
  If it does not install to proceed with the following steps.
  Step 1
  Download and install Windows Installer 4.5
  http://support.Microsoft.com/kb/942288
  Step 2
  Download and Install CleanUp Utility
  http://support.Microsoft.com/kb/290301
  Let us know if you need help with this problem.
  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• 2829361 update fails to install with error 0x80070005 - Win XP SP3

  KB2829361 Windows update fails to install with error 0x80070005 - Win XP SP3

  Thanks for the reply, but I reinstalled Outlook 2003 and that solved the problem.

• KB829019 NET framework 2.0 fails to install with error 0 x 643

  KB829019 NET framework 2.0 fails to install with error 0 x 643.  Downloaded V4 and repaired, but others say that I don't have NET framework is installed

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Some programs require different versions of the .NET Framework must be installed. Programs that can not find .NET Framework are very likely looking for a version that is not installed.

  For more information on the .NET Framework, you can take a look at my ISP note you like:

  http://taurarian.MVPs.org/framework/Net_Framework.htm

• 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation

  When you try to upgrade Windows 7 SP1 to Windows 10 ' 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation "is a problem recurring and none of the solutions posted for a Samsung RV511 work.

  When will there be a solution of Microsoft?

  Concerning

  Hello

  Since Windows 10 is a completely new operating system, the computer manufacturer might still not have designed and developed drivers for it. As suggested waiting for the manufacturer to release the necessary drivers for the hardware and then try the upgrade.

• URL is not change after successful authenticate with ISE 1.1.1

  Hello

  I have install Cisco Identity Service Engine (1.1.1) with Wireless LAN Controller (7.2.110)

  Everything is complete, unless the redirect URL. My customer comments can join the SSID of comments and also can authenticate to ISE.

  But after they success to authenticate with ISE, the URL in the browser does not alter the pre - configure. There still be something like https://ise-ip:8443/guestportal/redir.html . Anyway the content in the browser is replaced by the URL that is configured as http://www.google.com/

  How can I do with this cause of situation that everything works well, but only the URL of the browser that is not a change to the sits one.

  Thank you

  Mathias

  Hello

  See if this thread will help, what you can do to work around the problem, is to redirect all authentications to a single Web page.

  https://supportforums.Cisco.com/message/3664154#3664154

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• 802. 1 x fails to authenticate

  Hello

  I have a user named "testuser" and trying to authenticate the xp computer but fails to authenticate. The journal of the ACS says authentication failed, the user is in the local database, but why it fails to authenticate?

  I have cisco switch:

  WS-C2960G-48TC-L 12.2 (52) SE C2960-LANBASEK9-M

  * 8 Mar 04:03:55.030: AAA/BIND (00000029): link i / f

  * 8 Mar 04:03:55.173: % AUTHMGR-5-START: start "dot1x' for the client (782b.cbc9.a027) on the Interface Gi0/2 AuditSessionID 0A6A00200000001924EBD428

  * 04:03:57.010 Mar 8: % LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed State to

  * 8 Mar 04:03:58.016: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, until a state change

  * 8 Mar 04:04:05.482: % DOT1X-5-FAIL: failure of authentication for the client (782b.cbc9.a027) on the Interface Gi0/2 AuditSessionID 0A6A00200000001924EBD428

  * 8 Mar 04:04:05.482: % AUTHMGR-7-RESULT: authentication result "fail" to "dot1x' for the client (782b.cbc9.a027) on the Interface Gi0/2 AuditSessionID 0A6A00200000001924EBD428

  * 8 Mar 04:04:15.834: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state down

  Authentic failed

  testuser

  Group 66

  78-2B-CB-C9-A0-27

  (Default)

  EAP - TLS or PEAP authentication during the SSL negotiation failed

  ..

  ..

  50002

  x.x.x.x

  ..

  ..

  25

  PEAP-MS

  ..

  
  mozdirty type = "_moz" >

  Hello

  Sorry my mistake. I'm assuming that you would use 802. 1 x for authetication wireless. As described here on ACS, LEAP only works only for the wireless RADIUS authetication.

  Also windows XP natively only support PEAP and token based authetication.

  Think so next time, you could try using free generated certificates on ACS for PEAP authentication.

  The link below will guide you how to install free signed certificates on the ACS.

  http://www.Cisco.com/en/us/products/sw/secursw/ps2086/products_configuration_example09186a0080545a29.shtml

  Hope that helps.

  Concerning

  Najaf

• You can directly download the CC applications and authenticate with my adobe cloud identification information without using the desktop application? whenever I have try with the desktop app it says impossible to arrive on the same adobe servers when I'm c

  Hello

  You can directly download the CC applications and authenticate with my adobe cloud identification information without using the desktop application? whenever I have try with the desktop app it says impossible to arrive on the same adobe servers when I'm connected to the Internet and I don't have any active anti-virus software?

  Thank you

  No application of cc, no clouds. It's the simple truth here. Programs cannot operate without him, since he controls the installation and licensing. the rest, we do not know, since you have not provided any useful technical information. Start by reading this (yet?):

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  What also good technical details are necessary.

  Mylenium

• Win 7 machine when lightroom and ps will install always fails about 43% with 21 errors... Please help

  I downloaded both programs and they still fail about 43% with 21 errors... any ideas tried closes all windows did not help... using the grace of windows 7

  Hello

  Please see the following links:

  Error download or update Adobe Creative Cloud applications

  Failed installation. Error U44M1P7 | Updates

  Troubleshoot installation with the log files. CS5, CS5.5, CS6

  Kind regards

  Bani

• Failed to connect with the user name "Administrator".

  Hello

  I want to configure vCD in VCO, but I am faced with error. I'm by train through the configuration of the vCO.

  I get the error message https://10.99.133.212:443 , Failed to connect with the user name "Administrator". And the description of the error is: "the API version information could not be obtained for the host https://10.99.133.212:443 () (administrator@System)!'."

  Here are the entries I provide:

  Host: 10.99.133.212

  Organization: System

  Authentication: basic

  Session: shared

  and name of user and password.

  What could be the error here? My vCO has IP 10.99.129.33. And I imported the vCD also SSL certificate.

  Kind regards

  Bethy

  You must first remove the new plug-in...

  VMware KB: Uninstall a plug-in for VMware vCenter Orchestrator

  Remember that you use step 6.3 in this article to delete the contents of the package as well. To verify that the workflow and actions have been removed, check that the following workflow category (and all children of it) no longer exist:

  / Library/vCloud Director

  And all related Action modules should have disappeared as well:

  com.vmware.library.vCloud. *.

  Once you have completed all steps of the KB, install version 5.1 of the plugin, configure and restart the vCenter Orchestrator Server service, once again to complete the installation.