Two backup machines, we work, we have no

Similar Questions

• Network configuration for two virtual machines on a host

  I have two XP running on a Vista 64 host using 6.5 guests.  I would like to power instant message between the two guests.  I use the option open, and each guest can comminicate outward, very well.  However, if I send an instant message from one guest to another, the message can't.  All parameters in the virtual network editor are the default values on the two hosts.  Thank you.

  so IM between two virtual machines should work as well.

  There must be a factor that we haven't talked yet - any ideas?

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Two Time Machine drive backup restore to a single hard disk?

  Hello world

  I have a 2011 iMac that has a SSD running OSX and holding all of my applications.

  I also have a mechanical hard drive internal 3TO with my user on it and all my documents and files.

  I just bought a new iMac with a merger of 3 TB drive only and I need to restore everything as it is now (from two readers) on one drive in the new iMac.

  What is the best way to go about this?

  The SSD source looks like this:

  

  The Macintosh HD source looks like this ("timothy" is my user):

  

  Time machine has two backups separated according to me, one for each of the two drives internal, just restore both fully?

  Thanks for the help!

  The guarantee gives the right to the free phone support for the first 90 days of ownership.

• You want to have an answering machine and Fax machine all work?

  Many times people have trouble with reception of faxes while responding to the stand at the same time.

  I have a resolution for you with this problem.

  Check your strings and make sure that everything is connected properly.

  1. on the back of the printer, LINE 1 should go directly into the WALL SOCKET. (If you have a modem, with the phone line tied up in. Plug it into the LINE 1 of this modem.

  2 LINE 2 at the rear of the printer will be obtained directly on the answering machine. (Most phones have an answering machine in one. You can find some separate answering of phone). You always connect LINE 2 on the printer on the answering machine.

  So if you have any problems between the two, there are ways around it so that you can receive faxes, phone calls and messages at the same time.

  I hope this helps out.

• If I buy photoshop, how many computers can I download it on like because I have two computers that I work on.

  If I buy photoshop, how many computers can I download it on like because I have two computers that I work on.

  Hi dylanl,.

  You can download the license on the system at the same time, however you can use a system according to the end-user license agreement.

  Kind regards

  Mohit

• I am able to install a membership on two computers? (My work and home computers) or I have to buy twice?

  I am able to install a membership on two computers? (My work and home computers) or I have to buy twice?

  Hello Rafal,

  You are allowed to install membership creative cloud on two computers, you do not have to buy it again.

  Please visit: https://helpx.adobe.com/creative-cloud/faq.html

  Concerning

  Bianka Attre

• Hi hope someone can help? I have acrobat pro, 6 have worked well for the past two years but then just stopped working. Have reinstalled but still won't open, ronning windows 7. Help please!

  Hi hope someone can help? I have acrobat pro, 6 have worked well for the past two years but then just stopped working. Have reinstalled but still won't open, ronning windows 7. Help please!  Janice

  Hey janicem42177174,

  Adobe does most support the installation and use of Acrobat 6 because it is a very old version that is not compatible with Windows 7.

  I suggest you to please use the latest version of Acrobat 11.0.10 is perfectly compatible with your operating system with its functions and improved functions.

  You can download a free trial version of 30 days of Acrobat from here:

  Download Adobe Acrobat free trial | Acrobat Professional XI

  Let me know how it goes

  Kind regards

  Ana Maria

• Copy and paste shortcuts do not work. Have to use the mouse or go to the menus. Any suggestions? Copy and paste work fine in Safari

  Copy and paste shortcuts do not work. Have to use the mouse or go to the menus. Any suggestions? Copy and paste work fine in Safari edition

  I tried on two different machines of 10.7 and it seems to work for me on most sites, but there are certainly a few where it is broken. What extensions do you use? (Check the tools > Add-ons)

• First Pro CC automatic backup doesn't work does not correctly

  I've seen this discussion before, but have not found all the other answers that "you must manually saved all along.  Of course, Yes, I do this and it obviously helps.

  BUT it is a function in the program that is not working properly and can cost serious people.  I have several projects where I work and have interrupted by the automatic backup feature, but when I search the files it will create, they are not found.  Not in the same folder as my project, not in an Adobe first Pro Auto-Save folder and cannot locate it anywhere on the hard drive.  Just to clarify, I want to save local talk, not the cloud option.

  My question is twofold.  First of all, others seem to feel the same, but I have not seen Adobe weigh or recognize this bug.  And two, if there is a difficulty, I think it would be much more sensible to save your automatic backup on a different drive files so that if your primary drive fails, you can withdraw the last Autosave and continue.  So the possibility of designating where will your automatic backup files would be useful.  Does make sense for someone else?

  My apologies if this has not been formatted well, or I should have answered in another thread.  This is my first post.

  
  Thank you all,

  Dave

  Pouvez choose you where go the automatic backup of the files:

  File > project settings > disks work

  Go there and you should see where the Auto stores are, and you can change the location.

  The AutoSave feature has always been flaky, but it seems to work fine for me in the last version of CC.

• Two virtual machines to communicate with each other - intent an SMS Lab for test deployment?

  Hi friends ,.

  I am a new user and would like your help pretty desperately. The scenario is that I want to implement a SMS Lab to deploy the application from the server to a client and test the application. I have all the necessary knowledge to the packaging of application is concerned, and would like to help as much as VMWare is concerned.

  I created two virtual machines and one of them will be configured as a server and the other will be the client. I created a team with these two machines in it. I am trying to ping from one machine to the other and its does not work. I only use the method of configuration host. The idea is simply to make the two systems communicate so that I can finish the entire configuration and use the same SMS deployment lab.

  -First of all, I'm new to all this so I would like to know whther to everything I do is correct and what is the largest possible?

  -What I have to do something else to make sure that those two communicate about someother or any other configuration software is necessary?

  I would like to ask you guys to be a little more specific are you when you help others that I need you guys ore than a person who is used to working on VMWare.

  And just so you know if it helps, I use VMWare Workstation 6.0.

  What you are doing is reasonable.  Both of your virtual machines have an IP address on the same subnet?  In general, the scenarios no-ping, the first thing to check is the firewall in the guest computers.  Have you checked that allows ping traffic?  If it is disabled?

  -KjB

  VMware vExpert

• can we run two virtual machines simultaneously on ESXi

  Hi all

  I created two virtual machines

  1 & gt; Windows2003

  2 & gt; Red Hat Linux 5

  but I'm not able to run two machines at the same time, when I try to turn on the second machine as the other machines it works throw me error saying "resource memory Admission Control failure".

  Second thing can we export machines, we have created?

  Thank you

  Carla

  You'll probably have to remove the virtual machine to add at least 600 MB - have you seen the instructions on post - http://communities.vmware.com/message/1026853#1026853.

• Two virtual machines running at the same time

  Fussion 1.0, I remember being able to use two virtual machines at the same time, and each me each own IP without worrying if I used the bridged network configuration or address NAT. With the Version 2.0.1 (128865), only one will get an IP address and the other, the two XP SP3, visit account disabled NETWORK card. Any recommendations?

  Yes, it's tru, but I updated the vmx file to have another MAC. NIC I get this error when I try to boot the secondary machine (which otherwise boots fine solo).

  As I mentioned in the linked post, there are several unique identifiers that MAC address. Fusion has a UUID, and Windows has a SID. All must be unique (my guess is that it's the SID).

  The network bridge on/dev/vmnet0 of the device does not work.

  Which will result in network bridge does not work. The only suggestion I have right now is to try to restart the host, but demand around other people seem to be seeing this as well.

• A full justification and display two pages do not work correctly on iOS 10

  I have installed iOS 10 yesterday on my iPad 2 Air but have found that the two functions do not work correctly in iBooks. First of all, full justification does not work when the font size is brought to a certain level. In other words, a complete justification works only when I reduce the police to a size too small. It then automatically left justification when I increase the font size to a comfortable level. This feature, however, works perfectly on iOS 9.3.5. Secondly, as already posted by a member of this community of support, the option to display two pages does not work correctly. Also, this feature stops working when the police is increased to a certain size.

  Someone at - it solutions?

  It is not a solution. Apparently, it's just how it is in the new iBooks. I would say that we all leave comments that we do not like it. This is a feature of iOS 10, so it won't go away unless we do a big noise about it. I just got my Mini iPad so I don't have to deal with.

  www.apple.com/feedback/iBooks_iOS.html

• upgraded to 3.6, bookmarks, lost, lost the toolbar bookmarks, bookmarks library, lost cannot go to the previous backup, error message. Not have Torbutton. Cannot save new bookmarks. AutoFill remembers. Don't forget the story is about.

  upgraded to 3.6, bookmarks, lost, lost the toolbar bookmarks, bookmarks library, lost cannot go to the previous backup, error message. Not have Torbutton. Cannot save new bookmarks. AutoFill remembers. Don't forget the story is about.

  I got this yesterday after the 3.6.4 problem upgrade. I'm not sure if I saw all the things you did, but I have def lost all bookmarks and the back button. I fixed it by:
  1. go to the Firefox profile directory, which for me is here but 1st bit will be different for you as mine work specific:

  C:\Documents and Settings\U049177\Application Data\Mozilla\Firefox\Profiles\soez0lvk.default
  2 delete places.sqlite and places.sqlite - journal

  3. start Firefox (you should have the back button now works but not Favorites, he recreated to these 2 files)

  4. in the menu, bookmarks and then organize bookmarks, then button import and backup, then restore, then select a day to restore from. You should now have your backups Firefoxes bookmarks.

  Hope this works for you

• What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  Hi DaddyJeff,

  1. don't you make changes before the show?
  2. are you referring to the cursor in the area of user password on the login screen of Windows?
  3. when the cursor goes missing, the mouse pointer works on screen?

  It is difficult to say what is causing this problem. If the mouse pointer freezes or stops working, then we recommend you to reinstall the mouse. To do this, try the following steps:
  a. sign in to Windows.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. in the list of objects, expand mice and other pointing devices.
  d. right click on the sub element and click on uninstall.
  e. unplug the mouse and plug it back.
  f. the Device Manager, select an item in the list, click the Action menu, click scan for hardware changes.
  g. check if the mouse is detected, if so, then install it.

  See mouse USB which is connected to a USB 2.0 hub is not detected by Windows XP

  
  Note: if the problem persists, restore the computer to an earlier time. See How to restore Windows XP to a previous state

  Visit our Microsoft answers feedback Forum and let us know what you think.