First Pro CC automatic backup doesn't work does not correctly

Similar Questions

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• Why is one of my 4 5893 Modules doesn't work does not correctly?

  Hello

  This is the configuration of my HW and SW:

  LabView 2013 SP1

  1 x cRIO 9076

  4 x NI 9853 CAN Modules

  CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

  So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

  While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

  I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

  I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

  Thanks for your help

  I solved the problem, it was an error of configuration on my side.

  The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

• Update KB976902 now the mouse doesn't work does not correctly

  I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

  The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

  I did a restore on a single computer, but it did not help.

  Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

  NB: If a step said to reboot, reboot!

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The mouse scroll wheel doesn't work does not correctly?

  Win 7, Microsoft Wireless Mouse 5000
  Everything worked fine but I had to reformat & return my computer again the conditions of the plant.  I have add the correct software for my mouse.  Now, when I use the scroll wheel, it moves the screen a full coming soon page (spreadsheet, word processing, etc.).  The unique thing is that I can say that she does so ONLY with products at Microsoft (Excel & Word so far), with any other software, it seems to work as it should (a few lines at a time).  No one knows what is the cause?  Help please.

  Thanks in advance... Bob

  Hello

  1. have you checked if the problem occurs with a different mouse?
  2. don't you make changes on the computer before the show?

  
  You can try the steps provide in the supplied knowledge base articles and check if that helps:
  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398
   

• Samsung headset doesn't work does not correctly on my macbook pro 2015.

  My samsung headset does not work on the macbook. one of the outputs of the listener is weak compared to the others. Headset works well on other devices. Is this a problem with my slot, or is it because I'm using another brand? Help me please

  Go to the Audio configuration utility and Midi.

  Also, in the future please post El Capitan questions in the forum El Capitan:

  http://discussions.Apple.com/docs/doc-2463

• Caps lock key doesn't work does not correctly. New computer.

  My shift key does not work correctly. Sometimes it works, sometimes it doesn't. I push on it is difficult to ensure that it works. But used in a standard keyboard, it is a problem because I don't bang the keys. I have to keep retype phrases due to errors that it creates.

  Its a shame because my computer is new. In fact, within a month, it is the second time I have to look at the service center. First time because the memory of my computer showed I consumed 40 GB without even having saved/downloaded a single file/document. The repair center did not have an answer and reformat the computer. This problem has been resolved.

  Was so much happier with my Dell computer. Nothing fancy, but no problem.

  I have the same problem. the button is enabled as soon as the second or even third. you don't want to, but you have to take it back in service. Maybe it's a factory default.

• PrintScreen of Windows 7 doesn't work does not correctly

  Not sure if it is in the correct category but... I downloaded Windows 7 Pro 64 - bit from my school DreamSpark account and installed on my computer, which is pretty old about 5-6 years.  There should not be anything wrong with the copy of Windows, it is not a debug or whatever it is, it's just the regular retail copy.  Almost everything works fine except for a few small quirks/bugs.  First of all, I can't preview images using the Windows Viewer, it displays simply all the rectangles fully black images.  However, if I open an image to preview in Image Viewer, and then click full screen/slide show then it displays the images as should be in full screen.  And then exit fullscreen Gimme the picture in black and white.  Not a particularly serious issue just annoying really.  In addition, perhaps in relationship I guess, I recently discovered that my Windows PrintScreen does not work.  When I hit PrintScreen, or any variation of the PrintScreen key combination, it captures just a large black rectangle, as if my entire screen showed only in black.  I tried to paste my Clipboard into Paint and Photoshop and both give me a black monitor rectangle size, it's really weird.  I even tried a third-party screen capture software and it's the same thing and I can't find anything even close to relevant on the internet.  Anyone have any ideas, anything is appreciated.

  Another separate problem: when I turn on my computer, it will sometimes, not often but enough times to be meaningful, decide to not turn it on and recognize my keyboard and I have to restart and I hope that he do it again.

  Last thing, I swear (I should probably do different missions).  My computer, as in my windows, does not sleep properly.  Sometimes, he won't in the mode 'sleep' and every time I try and wake him up it gives me a white, white I think, screen instead of the login screen.  If I press space to unlock my computer, because there is no password, it will take me on my desk but he will not recognize my internet connection ethernet or my desktop speakers and I have to restart my computer to get these features.  Once again a lot of what I think are really weird problems.  Any ideas on any of my problems is greatly appreciated.

  HI -.

  Run the Windows 7 Upgrade Advisor to see if any conflicts are listed:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check the support site of your system manufacturer for a BIOS update and other updates to the device driver for Windows 7.

  Kind regards...

  jcgriff2

• The home of the iphone 5 s screen button doesn't work does not correctly

  Home screen (middle button) does not work smoothly. Sometimes, it works very well and sometimes it doesn't. Someone might suggest it is a hardware or software problem that must do to solve this problem

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo.

  Also updated software iOS 10.1 over your WiFi

  See you soon

  Brian

• Touch Pad doesn't work does not correctly? HP-Envy-15Q004TX

  Hello
  It is the first HP product I've ever owned, I'm pretty happy with the laptop, outside of windows 8.1 However, is not the concern of this post. My mouse pad stops working when I press a key, as in if I press 'W', while trying to move the mouse on the screen then followed mouse stops. So it is impossibe to play all kinds of games and making it really difficult to do anything else and it's just embarrassing. The only button that does not affect this is the key of the SIFT.

  I have no idea what to do, y at - it a setting or something like that or I'm just miserable?

  Thank you

  puffm wrote:

  Hello
  It is the first HP product I've ever owned, I'm pretty happy with the laptop, outside of windows 8.1 However, is not the concern of this post. My mouse pad stops working when I press a key, as in if I press 'W', while trying to move the mouse on the screen then followed mouse stops. So it is impossibe to play all kinds of games and making it really difficult to do anything else and it's just embarrassing. The only button that does not affect this is the key of the SIFT.

  I have no idea what to do, y at - it a setting or something like that or I'm just miserable?

  Thank you

  Hello

  Try to disable the check of Palm, this might help you: Touchpad PalmCheck - turn on or off in Windows

  Thank you

• Jumping cursor, sporadic and touchpad doesn't work does not correctly for HP envy 15

  Hello

  I had my HP ENVY 15 t-q100 CTO Notebook PC in September 2014. It has 8.1, 64-bit Windows. For the first few weeks of use, I don't have any problems. Then, I started having occurrences more problems of cursor/touchpad to the point where it happens all the hours of use (not a problem of external mouse):

  Jump around on the screen (a few millimeters in inches).

  Move per increment on its own without me anywhere near the laptop (usually spazzes left).

  Does not allow scrolling functions / normal touchpad when problems are happening.

  Works as if I am holding down the click button while I try to move it - mostly frustrating when I make the important work.

  At random click things that I try to move it.

  Here's what I tried to do to fix this and did not work:

  Roll back the driver (did not work).

  Update driver (no update available).

  Reset the device (works for a minute or two).

  Reboot (I do it everyday anyway).

  Reduce the speed of the cursor and other mouse options offered online.

  I've seen similar problems for the HP Envy 17 and other laptops, but no real solutions have been proposed. Please help me with this problem.

  In January 2015, I received by mail, a brand new Envy 15 t-q100 purchased HP's official website. Packaging and the laptop is here Mint (aesthetically speaking). That being said, I had the exact symptoms described in this thread since the first day. With a replacing synaptics driver, I was able to stabilize the mouse enough to effectively use the tool 'curve of pressure. " Then, I determined that it was in fact a hardware problem. I noticed that from time to time, the "animation" icon would indicate that pressure is applied even if I wasn't touching the laptop. If I applied pressure by pressing or stirring on the basis of the Palm, would stop the pressure indication and use mouse returns to normal. However, this problem gradually went from bad to worse, and finally the touchpad does not have all together. Firmware and BIOS flashing helped before, but has been either nothing change.  I debated on referring to HP for repairs under warranty, but after having to wait a month to get this unit in the first place, in addition to reading all these horror stories of people coming back a semi destroyed unity and always faced with the same symptoms, I was ready to fight against myself. so, I found a source replacement nine track want pads 'zone of control '. Ninety-nine percent sure that I had a defective keypad, I bought P/N "761210-001" to "parts_direct101" for $59.95 ebay seller. Disassembly, I discovered that one of the screw mount for the pad was loose (this may have contributed to the problem). I decided to replace the pad in any case. Finally. No more glitches. After months of experimentation and reading these forums, I have now a mouse working 100%! It's been more than 2 weeks now, since I replaced the touch pad and still no problems! I use my laptop 3-4 hours per day. I always use the synaptics driver installed replacement from "dpinst.exe" found in the x 64 folder downloaded directly on the website of synaptics 'uncompressed'. I have not tried to update with windows update again. Just happy to finally have a mouse to work on this beast of a machine. I'll keep you all posted if this problem will never return. With regard to the absence being automated support generic responses to "Customer Service" aka HP, I guess HP has accidentally put on a bad batch of caterpillars and they simply cannot 'afford' parts, labour and logistics to issue a notice of recall of this magnitude! Unfortunately, this laptop must be completely disassembled to replace the touchpad. I would NOT recommend this fix if you feel that it is beyond your skill level. Instead, call the HP technical support and insist that you have received a unit with a defective keypad. I hope this helps!

• Microphone doesn't work does not correctly in my Y510

  Hello

  I bought the ideapad Y510 6 months back. I did not use the microphone I was notusing cat etc.

  2 days back when I tried to chat, the first time in my laptop, the microphone does not work. You literally scream mic developed to have one third of hear it.

  Please help with any solution

  Pradeep

  Hi, I took it to Lenovo support center and they it is resolved. It's a matter of adjustment. Its works perfectly fine now. Thanks for the mail. Pradeep cordially

• Backlit keyboard doesn't work does not correctly

  Hi friends

  I recently bought touchsmart HP Envy 15-j122tx and noticed after the first day that the keyboard backlit light is uneven and after observation I find that led in the keyboard light are not working in some keys as other keys, what I now please replay fast...

  Hi frankricher,

  Thanks for the photo. It seems there may be a problem with the hardware with the backlit keyboard. You can try performing a (Windows 8) HP system recovery to factory settings to see if this fixes the problem.

  If this does not solve your problem and you are still under warranty, I suggest that you call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link to get help from your region number. Contact HP worldwide.

  I hope that this helps, please let me know how it goes.

  Thanks and good luck!

• Ctrl key doesn't work does not correctly

  Hello

  I have a HP Pavilion 17-e031sa laptop bought only 2 weeks ago running Windows 8.  The CTRL key does not work as it should.  In general, I would like to use it with the left button of the mouse to select non-consecutive items for the copy, but this won't work for this function.  It doesn't seem to be the key itself, because it does not work in the combination of keys ctrl/alt/delete.  I tried to uninstall the keyboard driver and restart, but without success.  Any help would be appreciated.

  Hi riggy69,

  Sorry for the confusion, I knew that these keys would not do the function you're looking for. I wanted to know if these shortcuts worked using the CTRL key. So we can see if it works this particular function or all keys ctrl shortcuts work. Quick access keys did what they were supposed to do? For example, the Ctrl + X cut the selected text, or Ctrl-Esc opens the start menu?

  Trying to see if there something wrong with the key itself or is someone wrong with this particular feature you try.

  Thank you