two dumb questions - file header and time saving
1. How can I add a header in writing worksheet file.vi? (For now, it only stores a number of columes of data with each colume representing a single channel. "I want to put a header at the top that shows the names of the channels).
2. can I store the date and time at which each data point is connected, as well as the data itself in a single file?
You can open the "write to the spreadsheet File.vi", change it with a header entry that works to your liking and save it under a different name (do not overwrite the original). Adding another table in spreadsheet String VI, a string concatination and an array of strings of entry for your headers is all that is necessary.
As for saving the actual time for each data point, you will need to follow that with your data and add it along with the rest of your 2d data. Write it to the File.vi spreadsheet doesn't have this built-in feature.
Alternatively, I recommend you do the following:
1 be sure to use the output waveform on any type of data read operation if it is available. Familiarize yourself with this type of data complex that NEITHER is came up with, as it will really save you a lot of headaches and extra coding. If the VI that makes your reading data does not support the type of waveform data, then you can always convert a waveform data.
2. try to use Scripture measurement file Express VI. You'll probably have more luck with that then write it in table vi.
Tags: NI Software
Similar Questions
-
Build dataguard two other questions. password prompt and certificate error
Instances of guard fiirt two data are built. It carries out the second I get this error in the log of all alerts. It seems that it is a certificate error, but I'm having a hard time nailing down.
BTW: Instance is 11.2.0.1
Thread 1 Advanced to record the sequence 318 (switch LGWR)
Currently Journal # 6 seq # 318 mem # 0: +DATA/sfs01/onlinelog/group_6.4762.769266689
Client SSL: Server DN does not contain name of SID WHEREAS
Archived journal 706 extra for each thread 1 317 0x799622d4 dest ID sequence entry 1:
Thu Mar 22 12:46:48 2012
Client SSL: Server DN does not contain name of SID WHEREAS
The third and final instance of data hold I build is 3 t and holding still to be restored. Two questions:
(1) can I suspend rman and restart it.
(2) when I restart rman how I stop it all asking me to specify the password. I'd rather put a nohup on a shell script.
Here's the script. Right now I am running it manually but would relly to run with nohup so I can go to lunch.
RMAN target auxiliary SYS@sor01_primary / < < EOF
Run {}
allocate channel C1 device type disk;
allocate auxiliary channel C2 device type disk;
allocate auxiliary channel C3 device type disk;
allocate channel auxiliary type C4 drive peripheral;
allocate auxiliary channel C5 device type disk;
target database double standby nofilenamecheck;
C1 output channel;
channel C2.
output channel C3.
output channel C4.
output channel C5;
}
EXPRESSIONS OF FOLKLOREOk
Therefore, this
RMAN target auxiliary SYS@sor01_primary
Would be more like this
RMAN target sys/password@PRIMARY auxiliary.
You should be able to pre-test to the command prompt.
Then hard-code in a shell script.
Best regards
mseberg
-
CP8: Question title header and progress indicator are absent when published.
Hello
I use Mac and publishing as SCORM 2004 (also tried 1.2), responsive project and download of LMS Blackboard v9. When the question has published the headers and the progress indicator are absent from all slides.
Thank you
Veronica
I have more access to the Blackboard. Just a suggestion: try to download SCORM cloud, to see if it's due to the CP file or the LMS.
A question: do you have change you the main slides for questions?
-
Newbie question! Header and main envelope now separated! Help, please
Hello. I'm really, really new to web design. I started with a free template and have made some changes. I've been messing around with the spry menu bars, and I don't think I'll use it right now. Somehow, I accidentally created a space between the header with the navigation bar and the main wrapper. It wasn't like this before. I don't know if it's a CSS or HTML error. Any help would be appreciated! Thank you.
Here is a link to two images of comparison on my Flickr Acount:
http://www.Flickr.com/photos/53308815@N00/sets/
Any help is very appreciated!
Where did you got this model of? It seems f__ked to sh_t.
Anyway changing the #wrapper css - margin: 10px 70px automatic;
TO
margin: 0px 10px auto;
#wrapper {width: 1000px;}
margin: 10px 70px automatic; will focus div on the page.
text-align: justify;
text-transform: lowercase;
line-height: 25px;
}more a comment css is better written as
/ * Center div on the page * /.
Not
will focus div on the page.
-
Newbee question - footer header and menus
What is the current practice, the best for creating a web site with compatible menus, headers and the feet etc.
I've read good and bad SSI and Dreamweaver libraries etc and would like to know where the people in the industry to turn to complete such a task.
I made a very simple site with php, www.canvasdoctors.com , but someone told me that how I did it was exaggerated and not correct.
I hope that I was clear.
Thanks for your time.
Ashley
According to me, who replied: Server Side Includes.
-
Equium L20-198: error 0271 check date and time settings.
My apologies if this appears twice, I tried to change and I somehow lost my thread.
Hi people.
For awhile, I had problems with my laptop. Toshiba Equium L20-198.
If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.
Date and time settings error 0271 check.
WARNING 0251 system cmos checksum bad default configuration used
About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.
The problem persists and I now also get this message every time that I reboot rather put into hibernation.
Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(
Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.
Thank you.
> Is it possible that the CMOS battery charge the main battery and this is my problem?
Well, the CMOS battery can be charged with AC adapter but the laptop must be turned on for about 18 to 20 hours.
It s not I known if battery CMOS takes the power of the main battery
Usually the CMOS battery should always charge in work and when the laptop is plugged in
So, theoretically the main battery has no influence on the CMOS battery.I think it might be a mobo problem, I think this could be a reason for it
By the way; in most cases the CMOS battery is not removable... so I wonder how did you repalce this CMOS battery...
-
L20-198 error 0271 check date and time settings
Hi people.
For awhile, I had problems with my laptop. Toshiba Equium L20-198.
If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.
Date and time settings error 0271 check.
WARNING 0251 system cmos checksum bad default configuration used
About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.
The problem persists and I now also get this message every time that I reboot rather put into hibernation.
Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(
Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.
Thank you.
Post edited by: d14ner
Hi people.
For awhile, I had problems with my laptop. Toshiba Equium L20-198.
If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.
Date and time settings error 0271 check.
WARNING 0251 system cmos checksum bad default configuration used
About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.
The problem persists and I now also get this message every time that I reboot rather put into hibernation.
Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(
Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.
Thank you.
Post edited by: d14ner
-
Hello community,
I recently bought a computer build-yourself.My question is what is the best way to mirror or save files on the two hard disks at the same time?I know there is a way in diskmgmt.msc, but I can't seem to make it work.Spec:Windows 7 Professional 64 bit8 GB ram ddr32 x 1 TB hard driveOn Saturday, 22 September 2012 00:53:18 + 0000, kevin.coe wrote:
As I said, I think it's not only not a good idea, I think it's a very
a poor man. Backup should be stored outside the computer content. Or
use a service like Carbonite Online backup.Ken Blake, Microsoft MVP
What is raid? A large number of people I know use raids.
RAID 1 (mirroring) is not a backup solution. RAID 1 uses two or
Several readers, each one duplicate of the other, to provide redundancy,
no backup. It is used in situations (almost always inside)
companies, not in homes) where any city cannot be tolerated.
because the way it works is that if a disk fails the other takes
more seamlessly.Although some people thing of RAID 1 as a backup technique, it is
what it is, because it is subject to a simultaneous loss of the
original and many of the main dangers facing the mirror
your data - serious power, close to the lightning seeds, virus
attacks, stolen computer, etc. Most companies that use RAID 1
also have a solid plan of external backup in place."Why the RAID is (usually) a Terrible idea".
http://www.pugetsystems.com/articles?&ID=29
Ken Blake, Microsoft MVP -
I filled out a form on the page 8 and he saved several times along the way, and now when I open this file, the form is empty? How can I save my work so I can open the form later and it contains all my data?
Hi Eileen97933052,
The PDF form must be extended drive in order to have this feature to save & print the form data.
Please confirm by the PDF Creator is the PDF reader or not extended.
Otherwise, if you have Acrobat installed on your system, you can reader extend PDF form yourself.
Kind regards
Nicos
-
When I go to the "network and sharing" and try to disable file sharing, it automatically turns on the Windows Firewall. I want to be able and disable file sharing and disable the Windows Firewall (I use Norton 360 firewall). Any ideas? Thank you.
Hello
Check this box
How to enable file sharing enabled or disabled in Vista
http://www.Vistax64.com/tutorials/126388-file-sharing-turn-off.htmlIf no joy collate Support Norton/Symantec and Forums
Norton support
http://www.Symantec.com/support/index.jsp
http://www.Symantec.com/Norton/support/DTree.jsp?PVIDNorton forums
http://community.Norton.com/Norton/?category.ID=NISI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Designjet Z2600: Questions about head of ink and printer maintenance
We have recently acquired a printer, Designjet Z2600 24 "large format. A few questions so we can know what to expect:
- Dry ink: A colleague suggested that dried ink can be a problem if the printer is not used frequently. We plan on it using every two weeks, but there may be times when a month or two will pass between uses. Is this a problem?
- Print heads: will be the printer alert us when they need to be replaced or should we look for quality defects?
- Management of ink: before printing, the printer will be well estimate ink necessary for work and alert us if we need to insert the new cartridges before employment passes by?
Thank you!
Hello
The recommendation is to keep it at any time.
If you use the printer turns off completely the power button.
When not in use, it will go in standby mode, wake up maintenance and sleep.
-
I bought a new laptop and transferred my music from my old laptop to my new laptop, and when I downloaded the new version of ITunes, it couldn't locate my music. Is there an easier way to locate my music than 1 file at a time? It is a great library and will take several days to move each file. I have a new Toshiba laptop with windows 10 OS with an I7 CPU 2.60 GHz with 8 GB of RAM
The "missing file" error occurs if the file is no longer where iTunes is expected to find. Causes possible is that you or a third-party tool has moved, renamed or deleted the file, one of its parent folders, or the reader, he feeds has been a change to the drive letter. It is also possible that iTunes has changed from waiting for the files in the presentation of pre-iTunes 9 post-iTunes 9 layout, or vice versa, and so looking for a bit in the wrong place.
Select a track with an exclamation point, use Ctrl - I to get the information, and then click No when asked to try to locate the track. (Because of a bug in iTunes 12 you currently have to say no twice!) Look under the Summary tab for the location that iTunes thinks that the file should be. Now look around your hard drive. I hope you can locate the track in question. If a part of your library has just been moved, renamed a folder or a drive letter has changed, it should be possible to reverse actions. If the difference between the two railroads is an additional music directory in a path, then it is a problem of layout. I can explain more if this is the case. If everything is where it is supposed to be trying to fix the security permissions for iTunes for Windows.
In some cases, iTunes may be able to repair itself if you go through the same steps with Get Info, but this time, click on search and browse the lost track. He peut then offers to try to automatically correct the other broken links. Although he said something like 'use the same location' I think he expects to find the titles in the same layout artist & album that they were before, with a systematic change to the path.
If another application like Windows Media Player has moved/renamed files then the chances are that subtle differences in naming strategies will make it difficult to restore media on the precise way that iTunes is expected. In this case, as long as the missing files somewhere, you should be able to use my FindTracks script for reconnecting to iTunes. See this post for an explanation of how it works.
If you want me to try to provide specific advice, please post back the following details:
- The location of the media file under Edit > Preferences > advanced
- The location of a sample of missing follow indicated under Get Info > file > location which begins file://localhost/
- The real path to the file which you gave 2 details.
Or you could go back to the old computer and see make a library of portable split, then copy the library into a portable State.
TT2
-
- Question
When I opened the window "save the Page under", the drop-down box file name indicates the files that have been saved a long time ago. It is not cleared by a function 'clear history' that I can find. How can I erase this?
Hello.
I think this is a related issue of Windows, because it is the Manager to save the windows file that we are talking about here (right?). You should contact Microsoft for help with this one, I think. You expect to be able to delete entries simply by touching delete on your keyboard when they are concentrated (that is how it goes for the removal of the form entries specific autocomplete in Firefox), but I have not tried.
I'm sorry I can't be more helpful.
-
Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?
1 n ° put them on a regular external drive and the value of Time Machine to back up as well; the files you want to keep should be at least two disks in case one of them goes down.
2. they will not be usable until the restoration.
(140480)
-
How to read the date and time of a file by labview information
How to read the date and time of a file by labview information? for example, time created and updated time.
The similar question had already spoken here (this is the old thread but still seems topical):
http://forums.NI.com/T5/LabVIEW/file-date-created/TD-p/109836
Maybe you are looking for
-
Qosmio G15 never boots from the recovery CD-ROM
Hi all I have Toshiba Qosmio G15 (Win XP Media Center Edition). I installed Phoenix Recover Pro 6 with success. Now the laptop restarts and after the manufacturer LOGO all I get is ERR: TOS0002 I tried using the recovery CD and it never boots up the
-
Save the files to an e-mail account e-mail, you intend to close
How records of yousave full of historical emails to documents or office or thumb drive
-
Backup exec 2012, issue of mpio san backup and ALA
We have a 4 TB File Server 2008, BONE is a physical server with hba to san volume where the files are located on.so far, our backup exec server has an hba double iscis, with only using a port in the San.in backup exec, I have created 8 jobs that run
-
BSOD a few minutes after starting. And another after entering IE.
Wake up BSOD a few minutes after starting. Then I start and it's OK. Then when I go into IE I get a new one. Then, everything is OK for a long time (often for the rest of the day). Trouble started when I downloaded Firefox, while IE was found to
-
Bitmap.getBitmapResource (...) does not find my file?
Hi all, I'm a 1st year student at the University of Warwick (United Kingdom) and I'm writing a small application for the Blackberry Storm, but I can't get my code to use just... Bitmap image = Bitmap.getBitmapResource ("c.gif"); BitmapField bField =