Two entrances of HP monitor

Similar Questions

• Problem of two - VGA and Displayport monitors

  Hello

  We have recently purchased a number of machines Thinkcentre M58 and have problems to make two monitors to work with these machines. We are setting them up with a monitor to the VGA port and a 2nd monitor connected to via a Displayport adapter Displayport to VGA dongle.

  The problem is that the 2nd monitor on Displayport don't wake up. MESSAGE appears on the monitor 1, and when Windows has loaded, only the 1st monitor displays a screen, while the 2nd monitor remains in mode 'sleep'.

  In display settings, it is possible to activate the 2nd monitor, how he wakes up and the user can continue to use both screens. If the user stops or restarts the machine it takes to manually activate the 2nd monitor whenever they connect.

  The same thing happens on Windows XP and Windows 7 computers, and I also tried to use a number of different instructors, who all have the same problem.

  Someone else had problems to get the 2nd monitor on the Displayport works correctly? Any advice would be greatly appreciated.

  Thank you very much

  Phil

  Make sure that you set the main display on the displayport device and then connect your vga port.

• HP Pavilion g6: select two more integrated external monitor

  I'm trym'g to use 3 monitor IE

  (1) built in the laptop monitor

  (2) an external VGA monitor

  (3) an external HDMI monitor

  Using the two monitor all work combination possible tiles sandstone (1 internal external + 1 external 2), but he is under no circumstances to use three monitor.

  For example two favorable external follow work very well (display Desktop which is nice). When I try to install (activate) the third (built in the laptop monitor) Windows 8.1 say iot cannot save the configuration.

  Any clue?

  Thank you

  Hi @antimoRoma

  Welcome to the HP community! I saw your post about problems with getting all three monitors to work. Unfortunately, there is no trick for most video cards in notebooks will only support two screens. High-end desktop video cards can support three monitors but not notebooks.

• How can I connect HDTV and LCD to PC using the two - as a dual monitor.

  I recently bought the PC HP Pavilion a6600f w1707 with HP. I also bought a DVI cable to HDMI to connect PC to Samsung HDTV. I can use the VGA cable to connect the monitor and cable DVI to HDMI to connect to HDTV, but log off for the other use. Is it possible to configure Windows Vista Home Premium to display on both screens at the same time, or at least be able to switch between the two without having to unplug one, then restart the computer?

  This can be annoying, but I've done it before.  Usually, you can connect at once, then go to the display panel, settings, advanced, and then there is usually a tab to select the components of the video card.  Mine says NVIDIA...  Once there, you can choose a number of options, for example, clone, extended desktop, etc..  I found that there is some problems with resolution when the display on my TV is over the current screen.

• Two DVI to VGA monitors

  I have two new VGA monitors.  My HP Pavilion has two DVI ports.  2 DVI adapters using the pc VGA only sees one of the monitors.  The other displays 'no signal '.  Read the other posts, I see that convert VGA DVI - D, but one of my DVI ports works fine.

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The above requested information on the side, back, or bottom of your computer. , Please do not include your serial number. Please enter the product/model information in the HP Online Support page for consumers , and/or post it here for our review.

  If the back of your computer is similar to the picture below, there is a DVI - D (digital onlt) output and a DVI - I (digital and analog) output;

  

  #3-DVI - D (digital only) # 4-DVI - I (digital and analog)

• XPS 12 + two S2340T for three monitors have contact problems

  I am testing a configuration of business as part of our R & D in the field.  I'm running a Dell XPS 12 8.1 Windows.  Last week, I ordered two external monitors S2340T for use with my setup.  In the past, I was able to successfully run the two external monitors for a three monitor Setup.  When I plugged in the first S2340T, everything worked fine. When I connect the other, I lost the ability to screen on the first.  On the second, when I touched the screen, he was interacting as if I touch the screen of the PC clean, despite the fact that he was it running correctly as extended desktop. I finally found that each monitor must be running with the USB cable (I found this in a forum of the year, even if the instructions I received still makes no mention of the need.) At the moment I touch on the screen of Mobile PC, as well as the first S2340T (monitor 1) that I am connected.  The other I'm connected (screen 2) takes any action contact and is the space in the mobile PC display.  If I disconnect 1 monitor, monitor 2 will work perfectly, as expected.  If I plug then 1 monitor, it won't work properly, allowing a contact immediately to show as a touch control on the laptop PC screen (thus imitating the question I had when monitors were reversed). I completely replaced the Dell drivers, even those it says is up-to-date.  I've disabled and upgraded.  At this point, I don't know what to try next.  Dell has recently told me to update my Bluetooth driver for a separate issue and immediately after, I lost the Bluetooth connectivity option and my Bluetooth mouse functionality. After you run an update of the driver from Dell, I lost my Bluetooth receiver on the laptop.  Fortunately, I've seen it before and all I have to do is to re - install the VPN we use SonicWall Global VPN client software.  Restart the system and my Bluetooth is back; but now neither monitor reacts to the touch on the scree, each monitor shows the point of contact as being on my Dell XPS 12.

  Try this...

  * Unplug the two computer screens
  * Reconnect the two monitors by USB 3.0 only (do not use DP or HDMI)
  * Use Windows to configure the monitors in extended mode and save this configuration
  * Go to the control panel
  * Contact search
  * Tablet select configuration - installation
  * You will see a screen that says "Touch this screen to identify it as the touch screen if it is not the press serigraphy tablet PC enter to move to the next screen.
  * At this point, press enter
  * This message will move to one of the external screens
  * Press the screen near the message until the message "press on enter to move to the next step in your configuration to compete."
  * Press enter
  * At this point, if only using a screen external, you will be on the tablet settings screen and you can close it. If you use several external displays, the original message will be then posted on other external display
  * You will see a display on the other monitor that says "Touch this screen to identify it as the touch screen if it is not the press serigraphy tablet PC enter to move to the next screen.
  * At this point, press enter
  * This message will move to one of the external screens
  * Press the screen near the message until the message "press on enter to move to the next step in your configuration to compete."
  * Close this window
  * Now every touch screen will work independently without affecting the other or the laptop screen

• HP f1905e monitor, connect two PC?

  HP f1905e monitor has two inputs for video, a VGA the other DVI D.

  I have two HP Pavilion PC: p7 1490 (product number: H3Z94AA #ABA) and a1540n (product # EX276AA-ABA)

  The first PC has two outputs video VGA and DVI-D

  The second video output only VGA.

  Can I join the two PCs monitor HP f1905e in simultaneously, one for VGA input to the VDI of entry

  on the monitor and switch between them with the keys of the ODS on the right side of the screen?

  Hello Clawinus,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you're looking to connect two computers HP f1905e monitor switch inputs as required. I got the Guide HP vs15 LCD monitor HP ha17 LCD monitor HP vs19 LCD monitor HP f1705 LCD monitor HP f1905 LCD monitor user and on page 3-14 TI says "you can connect the cable VGA, DVI - D cable, or both. A single cable is connected for typical installations", which States that you can connect the two wires.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Two monitors S20

  Is there a part I can buy to connect two monitors? My card is a fx1800 and I have two 17 "vga lcd monitors. I guess that I need one any adapter in there from the output on the video card to two dvi cables vga. I thought that I read somewhere here, but I can't find it now.

  

  Lenovo also sells a direct displayport to vga converter, but any will do.

• My computer does not recognize that I have two monitors connected.

  I have a VGA splitter cable, but even after I used the cord to connect two cords vga to a port, the computer is only noted one of the monitors. So when I go into settings to try to get them to display both, or to identify, the computer notice only a single monitor. So the problem is that my computer does not recognize that there are two put monitors in place.

  Cable splitter separates the single signal only. The computer only sees it as an output. You would need a different video card use the two forms as separate monitors instead of simply split the signal.

• Double screen with two VGA monitors (model Inspiron 620)

  Hello

  I have an Inspiron (processor i5-2320 @3 GHz) 620 office. The graphics card is AMD Radeon HD 6450.

  With two displays analog VGA, I wanted to dual monitor.

  My problem is that the Office does not recognize the two vga monitors but that one monitor. Vga ports (I have two) on the desktop do not work at the same time.

  So, I tried to use the DVI port, but it is only allowed to use DVI - D (I thought I'd use two monitors if allowed the graphics card DVI connector VGA). DVI - D deosn seem to allow analog monitors.

  Currently, I only use one of the two with an analog monitor vga ports.

  I wonder if I should buy the new digital monitor that can be connected to the DVI - D port.

  Or is there a method to use both on the desktop vga ports?

  riofunk7,

  You have two options...

  (1) connect both monitors to the ports added discrete video card
  (2) connect a monitor to the integrated VGA port. Connect the other monitor to the additional port of discrete video card
  * Reboot the system
  * Press F2
  * Navigate to Advanced-Graphics Configuration
  * Activate Intel several monitor function
  * Press F10 to save your changes and exit the bios

• database two OEM monitor 12 c have same sid

  OEM 12 c (oracle database 12.1.0.4), two and two hosts must be monitored. But two database have the same. When sid (orcl) I add the first database successfully. Add the second database, fail!

  error: ORA-20500: target already exists: orcl_oraclebase:IBMDB.

  Is oem 12 c not supported, two databases have the same sid? How solove?

  Hello

  It is possible.

  Option 1:

  Choose the single DB name under you can have the same instance name.

  For example:

  ORCL_ONE--> orcl1

  ORCL_TWO--> orcl1

  Option 2:

  use the verb emcli

  emcli add_target

  -name = "database".

  -type = "oracle_database".

  -host = "myhost.us.oracle.com"

  -credentials = 'UserName:dbsnmp; password: dbsnmp. "Role: Normal.

  -Properties = ' SID: semcli; Port: 15091; OracleHome: / oracle; "MachineName:smpamp - sun1.us.oracle.com".

  -groups = "Group1: composite; "Group2: composite.

• Mini and monitors = mystery

  Bought the new Mini in March (3.0 ghz, 16 RAM). Connected to two Dell UltraSharp 24 "monitors connected through CDM (Thunderbolt) > HDMI on the monitors.

  Immediate problem: random scrambled color on one of the monitors when Mini woke up from his sleep.

  Tried changing the cables, ports, view profiles in pane Pref - color problem garbled continued to display.

  After extended sessions of tech support, Apple allowed the return of Mini and sent me a new duplicate. Exactly the same problem.

  The second Mini continued switch ports, using new cables, trying different display profiles. Problem persists - any monitor is connected (CDM > HDMI) to the right AMD at the back of the MINI, which monitor screens color scrambled when waking from sleep (randomly, not all the time - time half-plus).

  Also, if I connect two monitors as CDM > DVI instead of CDM > HDMI, it eliminates the problem completely - perfect color on both monitors then to wake up from its sleep. So the problem is with one of the CDM ports connected to HDMI on the monitor.

  SO - I can shoot with CDM > DVI connections. I'm just at a loss to know why the AMD > HDMI connection on ONE of the two ports CDM on the MINI poster color blurred when waking from sleep more than half the time.

  Wonder if anyone has any ideas...

  CDM > on the MINI HDMI connections?

  Video problems on the current edition of the MINI?

  Plug HDMI on monitors Dell being inconsistent with the specifications on the MINI HDMI?

  Another thing I'm not checking or forget?

  Kudos to Apple for two very long with the first MINI tech support sessions and for sending me a replacement, even if none of this solves the problem.

  Thanks for your suggestions!

  Stick with the Mini DisplayPort to DVI, DVI connections is much more stable than HDMI.

  FWIW, I never had no problem with two monitors connected DVI 24 "or smaller on any of my Mac Mini models.

• Tecra R840-111: external monitor continuously restarts

  Hi all!

  I have a problem when you use the vga of the Tecra R840-111 with my external monitor/TV (LG M237WDP).
  Restarts it continuously monitor (it seems to restart).

  This behavior does not occur with another external monitor or if I use another laptop with the monitor named above.
  I used a live CD of linux (ubuntu) and everything is ok. Isn't weird?

  Advice?

  My toshiba has a kind of hidden in the bios menu diagnosis?
  I know that some laptop requires the user to for example hit CTRL + V in the bios in order to enter the diagnostic menu. Is there something like this?

  Can you help me?

  Thank you.
  Marco.

  Hello

  I have exactly the same external monitor but I don't t notice any monitor emits as you described in the message.
  I have two laptops and the monitor is connected to using VGA cable and DVI cable for two laptops
  In both cases, the monitor does not restart so I m not quite sure what you are talking about

  With regard to the BIOS.
  It s don't know for me about the hidden in the BIOS menus.
  In addition, you said that this problem does not occur with Linux, so I would say that its certainly nothing wrong with the BIOS. Also this theory would confirm because the other external monitor works well.

  Maybe some sort of software preinstalled Windows OS cause this?

  Also in the BIOS, you can choose the detection of the external monitor option (or something similar). Usually its set to automatic, but I assign this internal display.

• Equium A100-306 is the monitor out to the side, identical to a DVI out?

  Hello, I was wondering is output on the side of my laptop, the same as a DVI output screen? I am trying to connect my laptop to my hd tv, what's the best way? Can I use some kind of HDMI cable? As a DVI to HDMI cable? Or is there a special cable for that?

  When I try to use the svhs cable, the screen is black and white. Do I need to change the settings in order to remedy this?

  Can anyone help please?

  Thanks in advance.

  On the left side, you will find two ports;
  -RGB (port monitor)
  This can be used to connect an external monitor to the portable computer

  -s-video output port
  This port is used to connect the laptop to the TV using an s-video cable.
  There are different s-video cables.

  Check this box:
  http://www.SVIDEO.com/compaq1700.html

  But you will never be able to connect to HDTV for HD resolution!

• A satellite - monitor going to sleep and not signal

  My two monitors won't wake up, why?
  I have the latest version of the BIOS also and Powere options checked. What could be causing the monitors this problem?

  My Fujitsu was working fine the other day and also my HP w22 worked fine before.

  Monitors >
  In the HP w22 Device Manager > the device is working properly

  I have my Fujitsu currently connected

  In the Device Manager > I have listed two boxes: generic Pnp monitor in both cases, she States the device is working properly

  Device type > monitors
  Manafacturer > (Standard monitor types)
  Location > on Mobile Intel(r) 945 Express Chipset Family

  OP VISTA BASIC IE8

  I doubt that s a monitor problem
  Have you updated the display driver? You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  And have you tried another cable? Cheap cables are sometimes present problems, so you should exchange it and buy a high quality cable.

  Last but not Lea what Satellite phone you have exactly?