Two links one for VPN Site to Site and another for internet on the same router configuration
Hi all
I have 2 internet links an ADSL and lease terminated on the same router. I need to configure ADSL for VPN site-to-site of HO and internet leased line dedicated for all users.
my site IP subnet is 10.10.100.0/24 and HO subnet is 10.1.0.0/24. Please find attached Config and advice it will be OK and works fine
Thanks in advance...
Mikael
Hello
For me, it looks like it has configured the route correctly;
ip route 0.0.0.0 0.0.0.0 fastethernet4 -> for all traffic to the internet.
Road 10.1.0.0 ip 255.255.255.0 Dialer1 -> for vpn traffic to HO.
The public_IP_HO must be defined according to the map of encryption using the set by the peers command.
I want to add is on the isakmp policy hash attribute, you can choose between sha/md5 or whatever available on your device. Make sure that the isakmp policy to match political isakmp of your HO.
The other thing is the acl for the internet. You may want to consider replacing the deny statement if you want to deny traffic only to your jar currently it is said to deny all traffic 10.10.100.0 10.0.0.0 network, not to the 10.1.0.0 HO (network).
HTH,
Tags: Cisco Security
Similar Questions
-
Here is the site: https://www.valpak.com/coupons/printable/molly-maid---troy/107780?addressId=85760 & offerId = 1646606
None of the links seem to work and all work in Internet Explorer.Never mind... they have been blocked by security browser Avira.
-
Adobe may two clouds account for use on the same PC?
Adobe may two clouds account for use on the same PC?
Yes, each user must connect (using the cc desktop app) with their own id adobe/pass.
-
Client VPN access router to the Internet through the same router! How?
Hi all
I already setup VPN users connect to our router 1841 and corporate network. Use Cisco VPN Client and connection ends on the interface Dialer1 in 1841. This interface is also our ADSL Internet connection.
I need the VPN users out to the Internet via this VPN connection (it is through this Dialer1), rather than use the split tunneling and Internet browsing from their Local Internet service providers.
Of course, this Dialer1 is also 'nat outside' and FastEthernet is LAN and "nat inside '.
So I'll need NAT these VPN-pool addresses to address IP Dialer1. But what would be 'nat inside' in this case...
Can anyone help?
a loopback interface must be configured to "nat inside '.
for example
Loopback int 1
IP 1.1.1.1 255.255.255.0
No tap
IP nat inside
access-list 199 refuse ip<1841 private="" net=""><1841 private="" net="" mask="">
access-list 199 ip allow a
allowed policy-road route map 10
corresponds to the IP 199
set ip next-hop 1.1.1.2
interface Dialer0
political map of IP policy-road route
1841>1841> -
all-in-one for drivers from the Web site. all works except scan option
what OS you have... Windows 7, Vista XP? and when you try to scan it is out of the front of the printer or from the software of the PC... and when you try to analyse what is happening.
-
How to set up two different sites with a section that has the same content?
I have two sister sites, each a separate but related Department in a hospital. Each of these Web sites, I have a main tab called library, which has about 30 pages it contains for related health issues. The library is the exact same content on each site, but the main navigation and the header of the site is obviously different. I have been maintaining this same content on both sites (if something is changed, then I must do it twice). It is not effective, and I would like to find a way to combine them somehow. I don't have a ton of experience, but I catch pretty quickly and I basically need ideas for the best way to handle this. I considered creating a third-party site, and the Library tab on each of the other sites would take you to this new site. I also wondered if there is a way to integration of duplicate content to two different pages (perhaps with an iframe). In this way I would update the original file, and it would be updated on both sites.
The sites also have different sizes. It is 960 pixels wide and the other is 690 because it has a sidebar that makes it smaller. How would you recommend all that I manage that? I use Dreamweaver CS6 and my pages are all HTML
Because the sites are on separate areas, I'm not sure you can use set includes in this situation.
Iframes would be the way to go. You just save the content iframe on one of your sites and link page to two pages.
-
I bought Cloud Creative Suite 5 in June 2010, if I recall with two licenses, one for my laptop iMac book Prod and for my iMac 27 "flat screen. My Mac Book Pro should be replaced with a new Mac Book Pro with recent operating system software upgraded OS. What can you do for allowing me to transfer my course in Creative Suite 5 for my new Mac Book Pro?
[NEVER SEND A SERIAL NUMBER IN AN OPEN FORUM.]
[personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not the Adobe support, please do not post personal information]
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===>===> NOTE DAYS AND TIME
Don't forget to stay signed with your Adobe ID before accessing the link below
Serial number and activation support (non - CC)
-
try to install on the second computer. Already had two licenses, one for the office, one for the laptop. Now try to install the Office composition on laptop. Applications are coming up with buy it now and the start of the trial. Any ideas?
Hello
Please see the below help documents:
Applications creative Cloud back in test mode after an update until 2015 for CC
Kind regards
Sheena
-
Being new to such things, I designed a web site to read on a computer. If I make a Tablet and a mobile design I need different URLS for them on the same site or the devices will be able to open those instead of the computer?
Muse deals, each device uses the correct layout. You n ' to do anything, except to create the respective pages.
-
My one year contract is about to expire. Can I extend the same price for two months and cancel the contract without redoing the accession of another full year?
Hello
The plan of photography is an annual plan therefore would renew for another 12 months.
Under the terms of subscription, an early termination fee would be applied if you have decided to cancel two months in the new contract - Adobe - General conditions of subscription
Fill the cloud creative and plans unique app are available on a monthly basis, which can be another option - https://creative.adobe.com/plans
Kind regards
Bev
-
Hello, I recently created a website for a client. I also created a brochure with a QR code that automatically redirects visitors to a single page in the site. Well, I had to make changes to the site and I had to change the name of the page in which the QR code pointing to. Is it possible to keep the current name of the page but create a page of automatic redirect named like the QR code? Basically, the brochures have all been printed already, so I need the QR code when analyzed in order to continue working. Now, it is not the case.
Nevermind, I figured it. I've reproduced the page, renamed the QR that indicates the code of the page, and then he hid in the menu of page properties.
-
I have two laptops both used individually. Once I bought a licence I can use it on my two laptops or what I have to buy two licenses, one for each laptop.
A single license allows for active facilities on both machines.
-
Hello
I connected two computers, one running on windows xp sp2 and others running on windows xp sp3 via com using RS232 port via link Modem DFM-562E ++.
I am able to dial numbers from a PC successfully.
But when I do a direct link between them (one as a host, the other guest) through the com port, I get error 777.
Is this because the two PC's using different service packs?
Help, please.
Thank you & best regards
RaviIt is not the service pack - although you should have installed sp3 now.
Your message is not clear: have you been able to connect successfully computers using your modem D-Link? How did you do that? Will there be a modem in the second computer?
What cable are you using to establish a direct connection between the com ports on both computers? If you have purchased this cable online, please provide a link to the site where you bought it.
Please describe the physical connection between the two computers. For example, this is how you connect to the Internet by dial-up services:
computer 1-{(9 broches) RS-232 serial port}-{RS-232 cable supplied with the modem}-{modem}-{phone cord (RJ-11 modular plugs at each end)}-{telephone wall jack}
-
In a new tab (+) window, I get a full screen of the Bing site, and I do not see the gear of NEW CONTROLS TAB.
I tried dragging one bookmark in this window and then had this site full-screen. But when I exit Firefox and restart it, it is by default to the Site of Bing - I HATE BING
I do not see the gear for new tab controls, and so I can't put it: 'display your top sites '.
I uninstalled Firefox and installed the latest version - I found myself with the same thing, I had - including my homepage and exactly the same problem - your help would be appreciatedWhat do you see on the page, just nothing?
Could you come back: config, filter using newtab again once and if browser.newtab.url is bold claims to be 'set of users", right click and click Reset in the menu bit
If you open a new tab, which solve this problem?
Edit: sorry for typo's fault: browser.newtab.url
-
Buy two planes? Photographic for 9.99 and 19.99 Indesign at the same time? It s less expensive than 49.99 with applications and I only need this two software
Hello
Yes, you can buy the plan of photography as well as one app In-design under the same account.
Please check the link for purchase https://creative.adobe.com/plans
Please go through the Adobe - General conditions of subscription as well.
Hope this helps!
Maybe you are looking for
-
HP Pavilion 15-n096sa: replacing the wifi card
can I install a wifi card of 5G to my laptop and if so what make and model No.
-
I get messages from Bing to delete Bing. I tried everywhich way that anyone can think. It must be a Virus and I am protected. I'm on Google. I want Bing to my computer and it please tell me how to do it. I'm tired messages get from them to remove
-
I bought new cartridges yesterday and installed them. This is the message I got after that
-
How to check link flow control works on EqualLogic?
I recently had to disable DCB on different switches did not fully support DCB. Now I want to ensure that EqualLogic Arrays use correctly the link flow control. I remember a message in the event log earlier who said that flow control is enabled on a
-
What is the average of default setting in the subject area Permission screen in SPR
Hello gurus,We use OBIEE 11.1.1.7.150120. Trying to figure out how to play the permissions on the domain object.What is the average of the 'default' setting? It translates to 'Read-write' or 'Read' or 'access forbidden '? or business being a top-le