Two necessary Clear Cache system within two days since the 602 update

Similar Questions

• Many aspects of the system have been changed since the last update

  My Windows 7 Ultimate did an update this morning at 03:00. When I woke up and went to my computer at 6:00, I noticed a lot of things have changed. All my settings are gone. All my passwords are gone. All my files on my desktop disappeared. All my themes Aero disappeared. All my email settings (Eudora OSE) have disappeared. My preferences folder disappeared.

  It is as if Windows 7 is returned to the original installation and you will have to start all over again. When I go to programs, it seems I have not lost anything, just the folders on my desktop which had shortcuts is gone. When I go to desktop customization, all themes that I had loaded down disappeared.

  I had created a restore point yesterday. It's over. This morning, the update created a restore point. I could guess the use this restore point, but will not be my system try to rerun the update? I just live with it and try to implement brand new? Don't they test these updates before release? Very frustrating!

  Hi TheFox22,

  There are several things that interfere during the installation of Windows update and cause a few problems.

  I suggest that you perform the restoration of the system to the point that was created before the updates were installed.

  If you want to install the Windows update again, you will need to disable the security software installed on the computer and also the third-party program installed on the computer step called clean boot, it's to stop their interference during the installation of the update of Windows.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  I suggest that you put the computer in a clean boot state and then go to Windows update and install all available updates and check manually.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Since the last update of Firefox, I don't see a security lock when I connect to my two web sites to secure Bank so am forced to use IE and the two banks said the problem with Firefox, not their systems.

  Since the last update of Firefox (Version 4.0.1) I do not see a security lock when I connect my two web sites to secure Bank so am forced to use Internet Explorer for internet banking. I contacted the St George Bank and the ANZ Bank and both say that the problem with Firefox, not their systems. They advise also strongly me to not perform Internet banking unless the security padlock closed is visible in the window secure. The padlock is not visible when I connect secure site of PayPal. Before the upgrade, this problem did not exist and there is no when I use IE. Firefox is my favorite browser.

  The status bar everything has been redesigned, so now allows you to check if the site is secure the box to the left of the address (green, blue or plain).

  The site identity button | How | Firefox help

  Further discussion on this change mention an add-on, you can use if you really prefer to see a lock:

  Firefox 4 where is the lower right corner of padlock | Firefox Support Forum | Firefox help

• While turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  About a week ago I just bought windows mobile 8 is installed. Now for the last two days while turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  To stop, I get three option 1) sleep 2) arrested update 3) and close

  What should I do?

  Original title: windows update issue 8.

  Hi Parichay,

  The updates that are being invited to install are automatic updates.

  The message you get is offered by Windows 8 after that updates are downloaded and installed.

  If you do not restart your computer soon, Windows will force a restart of your computer two days after that it has installed new updates to complete their installation.

  You must restart your computer at a convenient time for you, rather than wait two days and have it suddenly reboot maybe at an inopportune time.

  Hope that solves your problem.

• About three weeks ago, I bought a new MacBook Pro, disabled Adobe CS 6 on my old MacBook and re-intalled on my new computer portable DVD with success. I used all my Adobe fine until today. Two days ago, I've updated all my creative suite after receivi

  About three weeks ago, I bought a new MacBook Pro, disabled Adobe CS 6 on my old MacBook and re-intalled on my new computer portable DVD with success. I used all my Adobe fine until today. Two days ago, I've updated all my creative suite after having received an automatic notification. Photoshop will not launch now (everything else is OK). When the Photoshop window it immediately crashes with the message "adding extensions...."  Quick basic routines' but nothing happens and I have to "force stop" window. Advice please?

  reset your preferences: https://forums.adobe.com/thread/375776

  In addition, if you inadvertently "improved" cs6 in the cc version, you use a trial (unless you have purchased a subscription) which will expire in 30 days.

• System randomly crashes after installing the latest update of Windows 7

  I am operating Windows 7 OS on 64-bit pc. Since the automatic updates of Windows on 01/10/13, I experience a freeze randomly the system on a range of applications. I tried other updates and basic system maintenance tasks are completed, but the problem persists. Can you help me please?

  Hi Stuart,

  I see that the computer hangs at random after installing some updates. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. which windows update has been installed recently?

  Let us try these steps and check the status.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

   

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  Start the computer in a clean boot state, and check the status. A clean boot to test if any element of service or third party application startup is causing this issue.

   

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 and Windows 8:http://support.microsoft.com/kb/929135

   

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 3.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Respond with more information so that we can send us your request in an appropriate manner.

• iPhone 6 s - gray space: scratched within two days of the opening

  Hello, I just opened my iPhone 6 s a little more than two days and I've been very careful with this expensive piece of art. I was wearing sweatpants soft and clean every day so jeans or anything hard would mess with the phone until it came to the case I ordered on Amazon and screen protection. I have now a small thin stripe loose is more than half an inch and I have never scratched a phone in my life. Please, are there solutions that I might have that only cost me, I really wouldn't go to an Apple store and pay to fix because I've already spent so much money and can't afford to spend more.

  You can call your Apple store for to talk them about it, or you can make an appointment to walk and explain the situation. I wouldn't necessarily go in expecting to be free, however. The phones are not known to develop cracks by themselves so you'll be little at their mercy, it is.

• My application does not work for two days after the update

  ITI has been two days now my app is not workog knowing that I paid for a membership year after that I did the update it please help

  We will post updates on the installation of revel problem in the following thread:

  Problem installing Adobe Revel 2.3.2

• Set a date of two days in the future

  Hi all

  This code works very well to set a value if there is no value in the form. MEETING (so I can insert the value in my db with sql):

  < cfset isMEETINGNull = iif (len (trim (form. (False (MEETING)) EQ 0, true) >

  How can I set the value to a date of two days from now if it is empty (instead of the null value because it is at the moment, seomthing like that?)

  < cfset isMEETINGNull = DateFormat (DateAdd ("d", + 2, now(), ' MM/DD/YYYY') >

  Thank you!

  Message has been changed due to the possible response from google search

  Here is another suggestion. It includes a validation.

  The value to store in the database is then meetingDate.

• the system will not stop after the new update

  System was updated with the new updated 05/24 and now will not shut without using the power button / stop what happened, how this can be corrected?

  FWIW, software Wacom has started to cause a problem with OSX 10.11.5. If you have installed you need to uninstall or check and see if the latest drivers Wacom released a few days ago helps. If you have any Wacom software, there are some others mentioned in the CSA programs that cause the same symptom. I don't remember which off the top of my head.

• Udates who of 'success' every day? The same updates?

  Running Vista Home premium, automatic updates told me each day that there are updates to load. After a few days, noticed that it is always the same updates that are "successfully" updated... 62.9MBs k 2656351 & 2600217 & 2487367 & 2468871 & 2533523. Why?

  Have you tried Microsoft 906602 and the Wizard but still have the same problem.

  Hello

  1. have there been recent changes to the system before the show?

  Method 1:

  Follow the link below and check if updates installed.

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows-Vista/see-which-Windows-updates-are-installed

  Method 2:

  Follow the link below and follow the steps. Check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  Let us know if it helps.

• What to remove the genuine ms my system.i notification obtained from the window updates

  Mr President.

  How can I remove the genuine window notification that I can't install it.
  Window updates I remove everything dowload, but every time I start my system its proves again that the notification.
  do I have to remove this notification. ? and I don't want to like this notification
  PLEASE ME HELP SIR TO FIND THE SOLUTION

  Your installation is a counterfeit

  The key used is one that was never issued by MS - and is a Volume license key.

  This key has been generated by a computer hacker tool.

  IF your COA sticker is for Windows XP Pro, you * may * be able to change the key to that on the label, using the tool to update the key product - http://windows.microsoft.com/en-GB/windows/help/genuine/product-key

  If the COA sticker is for WIndows XP Home Edition, you will need to reformat and reinstall it from the original recovery media for your machine, or OEM System Builder disk - after saving your data on external media.

• Microsoft Management Console error: this function is not supported on this system. Also noticed that the automatic updates did not install it and returned error 80070005.

  Original title: Microsoft Management Console this feature only is not supported on this system

  I am running Vista 32 bit Business since an administrator account.

  Recently, I noticed that the automatic updates did not install it and returned error 80070005.   After investigation, I found that I could not open mmc at all and always get the message "this function no is not supported on this system.  No major changes have been made to the configuration to trigger it and I can't watch the event log because it is in the MMC.
  I have studied this question in line and tool the following actions, which none worked:
  carried out a complete antivirus scan (I use Commodo internet security)
  created another account administrator
  has run SFC (no problem)
  has run the registry cleaner (no problem)
  has run msconfig.exe and disabled all the startup process
  updated windows right click and run as administrator
  Started in safe mode and tried all above
  After that, I don't know where to go... it doesn't seem to be a download for Windows vista to reinstall mmc.
  I have about 50 updates critical, sitting in my windows update that can not install because of this problem.  Can anyone help?
  Jeff

  Hello Helpmehelpme,

  First, I would check since it is professional Vista was that computer on a field of work or it was already on an area of work? There may be group policies that are in place that prevent to run MMC.

  When did start to happening? Is there anything new on the system which has been introduced into the environment (software, hardware)?

  This thread gives a few steps trying to the original poster that you can't have.

• my system update two days ago, the top of the page seems to have moved down, partially hiding the minimize/restore button.

  This seems to be linked to changes in the presentation of the toolbar, as with the menu option 'View' checked the screen returns to normal, but then my favorite icon disappears. If I uncheck the "View menu" option, I get the icon back favourites, but the minimize/close button disappears almost.

  Have you tried to disable hardware acceleration in Firefox?

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  It has no effect if the window of Firefox is maximized?

  You can also check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Since the 9.11.11 two days ago, the toolbars disappeared. Its so boring and I don't know how to fix the fault. Funny that his happens with firefox not IE. I can fix it?

  As I reply to this mail, there are no ads, no pop, nothing else but txt boxes provided for me to provide details of my problem. the entire screen is white from top to bottom. the background icons just like the toolbars at the top of the page have all disappeared. To get out of this screen, I blindly looking for the arrow back to top of my laptop. Its 2 dys since this started. I have not install or change anything at all for some time

  Press F11 - you have toggled mode full screen on.