Two outputs XML to a

Similar Questions

• IPads have two outputs

  I use an app that plays back "multi-way" called reading. It has a feature called auto pan which has a toggle button, but when I turn IT says, "Only works with 2 iPad release." My iPad 2 Air apparently has this feature, but the iPad 2, that they have in our rehearsal studio does not work. I'm trying to find out what iPads have this feature, but looking at the specs on the Apple website is not to give me this info! Can someone help me? And I'm not sure I understand because the headphone jack released in stereo must be some different internal separation type pass...?

  Thanks much for any help!

  What to do with it, their Web site?

  AutoPan

  Enable AutoPan in parameters to pan the ClickTrack and Guide to the left and all other channels to the right. CustomMixes are made this way before, but you should choose Auto-pan to separate the Guide and ClickTrack for multitrack in the show alive. AutoPan is necessary when using two outputs.

  and

  Multiple output

  Using a compatible USB Interface, you can send several of your iPhone or iPad to your soundboard Audio outputs. For a list of devices compatibleclick here. (Device upgrade Premium) (which takes you to http://www.multitracks.com/products/playback/supported/)

• Failed to retrieve input or output XML for a BP

  Hello

  Unfier 10.1 running.  Logged as administrator. After the opening of a company under uDesigner/Business process, select a BP.  In the menu select integration.  When we try to recover the input or output XML, we get an empty document of 0 bytes.  The entry CSV Template shows to the menu option and XLS document with data.

  Anyone encountered this?

  Thank you

  Rudy

  Solved.

  I logged in as a user with Admin privileges, then changed to user mode Admin open the workspace under uDesigner and company I can export documents of integration with success.

• How can I produce two outputs of the same project

  Dear Sir.
  
  My goal is to produce the two outputs of the same main project, Webhelp and HTML help, each of them will be used differently in my compnay.
  
  Producing two outputs is fine, but the problem was that external links are done differently for HTML help and Webhelp and as I Knew about you that can be solved by using conditional tags.
  
  Actually I am new to conditional tags and I don't know how to use them. Could you please help me to do this or recommend a link on how to use condtional tags to produce different outputs.
  
  Thank you very much
  
  

  Hi there ahlam323

  See if the link below helps everything. Some goober wrote something on it.

  Click here to read the goober guide

  See you soon... Rick

• Output XML code directly will open in the browser

  Hello
  
  I use OAS 10g R2. We are generates all the reports with the PDF output directly in the browser. For some of them, we implemented exit Excel, but it does not work very well. After that, we deployed out Excel through Rep2Excel but has too many problems.
  Finally, we opted to generate reports with the output XML, using DesFormat = XML and DesType = CACHE. We want this release to be opened directly in Microsoft Excel, but browsers (Firefox or IE) that open directly so that users must save the output in an XML file and then open it with Excel.
  
  We know some so that the output can be directed to Excel without this extra step?
  
  Thank you!

  Hello

  You can test to use the mimetype parameter:

  http://www.Oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/Cmdline/common/cla_mimetype.htm

  Concerning

• Output XML editor in different forrmat

  Hello
  
  Any help with the problem below would be very useful.
  
  I have a xml data in the file that has the folloing loop structure:
  
  -< G_REPORT >
  -< G_HEADER >
  XYZ < NAME > < / NAME >
  < > 111 ADDR1 < / ADDR1 >
  < / G_HEADER >
  -< G_LINE >
  < LINE_NUM > 1 < / LINE_NUM >
  < TRX_NUM > < TRX_NUM > 11
  < / G_LINE >
  -< G_LINE >
  < LINE_NUM > 2 < / LINE_NUM >
  < TRX_NUM > < TRX_NUM > 22
  < / G_LINE >
  -< G_LINE >
  < LINE_NUM > 3 < / LINE_NUM >
  < TRX_NUM > < TRX_NUM > 33
  < / G_LINE >
  < / G_REPORT >
  
  My model looks like this:
  
  =============================
  Header:
  
  Name: <? NAME? >
  Addr1: <? Addr1? >
  
  < for each: G_LINE >
  Line:
  
  Line number: <? LINE_NUM? >
  Transaction: <? TRX_NUM? >
  < end: for each >
  =============================
  
  The release is expected as below:
  
  =============================
  Name: XYZ
  Addr1: 111
  
  Line number: 1
  Transaction: 11
  
  Line number: 2
  Transaction: 22
  
  Line number: 3
  Transaction: 33
  =============================
  
  The header part should print on a single page, each part of the line should print in a new page. Thus the report above should be printing in 4 different pages.
  
  But my State prints the output with line 1 continues soon after the header, 2 continuous line after line 1 and line 3 continued after line 2.
  Please, help me to print each of these lines in a different page.

  Two options:

  1. If your motive is just to have a line break, use front for each group of end
  2. use for-each@section, if you want to reset the Group of numbers/print page information in the header/footer

• Satellite 1415: Two outputs screen is not possible?

  I would like to use the coaxial video output as a second screen. Is this possible? An explanation, in the cases where I'm being unclear. In essence, I would like to use the coaxial output as a second monitor as seen with computers with two monitors and the office is stretched between the two (the half being on one monitor, the other half is on the other monitor).

  Reason being, I want to configure my laptop as a karaoke station. I would have to open the Windows Explorer and mediaplayer playlist on my laptop, while having the words "full screen" on television. Someone knows how can I do this?

  Thanks for any help you can provide!
  Art

  Satellite 1415 seems to be designed for an American market. I didn t see in Europe or on the European sites.
  Anyway, your description is clear and I think you want to use the extended desktop option. I use this too. It s very useful for someone who uses different applications together.

  But it takes something cleat. Video out port (coaxial cable output) to play video DVDs on a projector or TV. It s not for external monitor connection.
  The device also supports a RGB port (near parallel port) and this interface allows to connect an external monitor.

  The extended desktop, you can turn on in the properties of the graphics card. Simply right-click on the desktop and select Properties.

• Interleaving of samples: two outputs analog (tables with different lengths)

  CHAN                   AOCHANNEL1       AOCHANNEL2       AOCHANNEL1           AOCHANNEL2       .. .and so on
  
  SAMP                   * * * * *           *              * * * * *              *           .............and so on

  Hi guys, how could I go on the interlacing of two arrays of different lengths in a two-channel analog output?

  In the illustration above, for example, I like to write 5 values in channel 1, followed a string of unique value 2 and so on...

  I use DAQmx library controls to achieve this (not LabView).

  I am able to write unique values each time a task is opened without any problem, I was wondering if I can interleave the berries so that values are buffered and tasks are performed with greater haste.

  best regards,

  Ravi

  target met: I've made the following changes:

  CREATION OF TASK 1
  
  CREATION ANALOG_VO channel 1 & channel 2 in TASK 1
  
  CONFIG. CALENDAR OF TASK 1
  
  CREATED some TENSION with SAMPLES interleaved pre
  WRITING TASK 1 VALUES
  TASK 1 STARTED

  
  
  DAQmxCfgSampClkTiming(taskHandle1,"",SAMPLING_RATE,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,2*SAMPLE_SIZE_WX)
  
  
  

• How to get two outputs at the same time?

  Hello

  I use the PCIe6351 DAQ card to generate two signals separately. This product has two exits, so I thought that I can use both at the same time, but when I run the code it gives an error: "the spesified resource is reserved. I just want to know if it is possible for me to use both outputs together at the same time or not? If so, would you please guide me what should I do to solve the problem?

  Thank you very much

  Soran

  Great! This works. I appreciate your help

• is it ok to connect two outputs analog voltage in series?

  Ok... I have a PS-210 FieldPoint... basically an analog voltage output 0 - 10V, 200mA per channel (with additional external power supply)... my question is... can I plug two channels in series?  Love how I can put two AA batteries in the series... and then to double my blood pressure?  and then check my two separate channels and the sum of the tensions would be assujettirait I have my load in?

  Thank you!

  No, you can't.  The channels all share the common side of their outputs.  If you've tried to hang them in the series, you have wind of short-circuit one output from the ground.

  The reason for which you can do with batteries is that the tensions are floating.  There is no common reference between the negative terminals of both batteries.

• How to turn on the two separate LEDS by using one or two outputs digital

  We use NI 9172 cDAQ with an entry and an exit module hung. I have my program in place with 2 input lines and a line out, but I think I need two lines of output, in any case using my Boolean switches and doors logical digital that I wired up to three switches Boolean just play with the possible entries to turn on LEDs. The way I set it up that a single LED is lighting up but it is to recognize that there are 2 LEDS, so I don't know what I need to add or change, I'll attach a copy of my program for you to watch...

  Thanks for the help I found the table of construction and both got to light up... like I said im completely new to this

• elapsed time after two output pulses

  I have a gas with an output signal meter (or perhaps more accurately, a closing contact) for each cubic foot, put in the meter. The tricky part is that the closing time varies over time as the gas flow increases.

  I am sucessfully measure the total volume of gas used in a 'run' by using a shift register to compare a change (closed or open) and divide the total by two changes. However, I would like to note the elapsed time for each foot cube through the meter and the putput that on-screen. This number should only be updated when each cubic foot passes through the meter. It's simple if it was just an impulse, or even two an amout set apart, but I have a problem with the irregularity.

  No matter if the timer has elapsed begins on the forehead or the edge down so it starts and ends at the same place and the inverse of this number is then displayed on the screen.

  My current control loop is a timed loop iterations to 250ms on a cRIO 9072.

  Any advice on how to implement or the display would be great!

  Hi, NXT,.

  detect the rising edges of your meter. Store the current time in a shift on rising register and get the difference to the previous hour:

  

• To write a waveform to two outputs analog of DAQ(USB-6215)

  Hello

  I use USB-6215, who has two analog outputs and having to send the same waveform through the analog outputs two of my DAQ. at the same time. in fact, I have a text file consisting of a code word (please see the attatchment) with dt, freq and annex 0 in the first column and other columns contain the word coded. Withe the help of dt, the rate and the data I did a waveform with the wave of construction VI. I am able to write this wavefrom through an analog output A01 right now. I want to know how I could write the same analog waveform other AO0 out simultaneously. I use a source of external triggering via PFI0 to be triggered. for now, I use the write.vi DAQmx (analog channel 1 DBL 1 d N samples) and DAQmx create virtual channel.vi with dev1/ao1 as the physical channel. For more information, I am attatching the program along with the text file. Please see page 2 of my structure of matter in the VI attatched.

  Thank you.

  Kind regards

  Raja

  Hi Steve,.

  his works now. I changed the instance of writing DAQmx for analog waveform samples N channel N. still, I now that a single waveform. How could I do like two like it (writing DAQmx) will not accept a single waveform as the entry as the number of channels in the task will now be 2 where, under the waveform has an exit.

  Kind regards

  Raja

• Question of output XML R12

  Hello

  In our cloned instance of R12, the output of an XML report fails to print in pdf format,

  It gives the result in XML.

  I see error in the internal Manager log below

  [09/06/13 20:48:47] [UNEXPECTED] [2684937:RT13570773] java.io.FileNotFoundException: / sd01/inst/apps/SD01_

  ausperora17/appltmp/xdoW6CEwPQktR060913_0848470510

  I checked the profile directory Temp XML option, it is set to the correct value.

  Do I have to pay any other xml partner profile values?

  Thank you

  Please see

  XML editor reports fail with java.io.FileNotFoundException on Temp Directory after cloning [1189764.1 ID]

  XML editor reports fail with java.io.FileNotFoundException on multinode Clone [1351284.1 ID]

  AppsMasti

  Sharing is caring

• PL/SQL package, output XML

  Hello
  
  I'm working on the Pl/sql package to generate the output in xml format using tags XML, but the output is the break with the following error when data have special characters as '& '.
  
  Error:
  
  The XML page cannot be displayed
  Cannot view XML input using XSL style sheet. Fix the error and then click the Refresh button, or try again later.
  
  Whitespace is not allowed at this location. Error processing resource
  
  I use the <? XML version = "1.0" encoding = "ISO-8859-1? > and even tried "UTF - 8' at the beginning of my xml." Anyone can guide me please how I can handle this.
  
  
  
  Thank you!

  Can you guide me on how I can use CDATA for this specific tag.

  XYZ & Co. Inc.

  SQL> set scan off
  SQL> select xmlelement("CUST_NAME", 'XYZ & Co. Inc') from dual;
  
  XMLELEMENT("CUST_NAME",'XYZ&CO
  --------------------------------------------------------------------------------
  XYZ & Co. Inc
  
  SQL> select xmlelement("CUST_NAME", xmlcdata('XYZ & Co. Inc')) from dual;
  
  XMLELEMENT("CUST_NAME",XMLCDAT
  --------------------------------------------------------------------------------
  
   
  

  -First method automatically escapes the characters not valid and replaces them with their corresponding entity reference
  -Second method encapsulates the data in a CDATA section so that there is no need to escape

  You can build the entire XML document with these functions, that's exactly what they did:

  http://docs.Oracle.com/CD/E11882_01/AppDev.112/e23094/xdb13gen.htm#g1047191