Two Questions on Windows 10

Similar Questions

• Two Questions of Partition

  I want to change the drive letter of a couple of scores. For the current configuration, see: http://paulrittman.com/CompMng.png.

  I want to do is make my score of documents (currently F), d.

  It is, the letter D is currently assigned to a backup partition. When I right click on the partition in the center pane higher in my screenshot, I don't get anything in the context menu, but a link to a help file. When I click on partition F, however, I don't see the option to change the drive letter assigned.

  In addition, if you look in the upper middle pane, you will see two instances of the recovery partition (D).

  So my two questions:

  (1) is there a way I can change the drive letter of the partition recoery? Or even if I can him, isn't it advised?

  (2) the presence of two lines to my D recovery partition in this upper middle pane means anything it either bad - such as, if I ever need, will be miss BIOS Windows / connection and refuses to start or restore from this partition?

  
  HP LaserJet p1102w

  Hello

  No, you cannot because the Manager of Recorvey needed. but you can create a recovery (DVD, USB) media and delete. Please note: you must correctly create and keep in a safe place.

  Kind regards.

• Two questions about SP1 and Vista startup

  Hi all
  two questions:

  (1) I understand that if I want SP1 on my machine, I have to install manually, because it is not included in the automatic update routines?

  (2) my machine failed yesterday, I received a message "unable to start Windows. A recent hardware of software change might be the cause. "The only thing I can think is that before turning off the previous time, I inserted a USB hard drive to copy the files on it. But I continued to work normally on the machine. Another unusual event, it is the day before, it was very slow to start, so afer it finished start, I restarted.

  When the system could not start, I tried several times, automatic procedures that always ended with "windows cannot resolve the issue automatically,
  Contact your service provider. In the last attack, I also clicked on a 'Advanced tab' and restored the system, but it does not solve the problem. Then, this morning I turned on the machine again to write the exact error I have, and message instead, unexpectedly (and rather willingly), the machine starts normally. So, what could happen? Should I get my machine (which is less than one month) verified?
  Thank you!

  Paola

  Hi polla.

  (1) Yes, Yes. You must download and install SP1 manually.

  (2) No, I'm Don t think that you should check. I would say: work with it and if the error appears, back up all your data and restore complete your system, so you can exclude any type of software problem...

  Welcome them

• Two questions on Satellite L500D-00F

  Well, I have two questions.

  On my hard drive of diving, there are 4 existing partitions, and I want to create a new one for a dual boot of Windows XP. I currently have Windows 7.
  I can create a new, but when I try to format it, it says that there is too much existing partitions. 4 partitions are a recovery 1.46 GB, 435GB C drive, 17.86 GB and a GB 10.60.
  What are the 17 and the 10 GB ones for? Is it safe to delete them to make room?

  My other question is where can I find the drivers for my laptop?

  I don't know where you bought your laptop model and the structure of the partitions is not known to me.
  Googling around, I found some info and assume you have the Canadian cell phone model. Can you confirm this?

  Anyway, Canadian download page, you will find under http://209.167.114.38/support/Download/ln_bymodel.asp

• My new Thinkpad S1 Yoga has two questions

  I got myself a Thinkpad S1 Yoga (20cd) and I have two questions;

  (1) the wireless lan driver fails and booting. (Dual band AC 7260)

  (2) the trackpad acts as a simple mouse. (ultranav driver is installed)

  I am running Windows 8.1pro (x 64). All the drivers are updated and updated the BIOS.

  Driver wireless lan starts normally when I disable the USB3 support in the bios or disable it "Intel (r) USB 3.0 eXtensible Host Controller - 0100 (Microsoft)" in Device Manager of.

  When I enable and disable the driver lan wireless driver again operating normally.

  The trackpad does not support actions such as scrolling.

  Kind regards

  Roberto

  Well the ultrapads issue is resolved. I uninstalled the ultrapads driver and the driver synaptics windows. After the reboot, the pavement was a standard ps/2 mouse to the microsoft driver. Change install the latest driver from ultrapads I have a thinkpad tab in the mouse control panel.

• The DDE network between two PCs running windows server 2003

  We seek to transfer data between two excellent sheets (Office 2003). Two excellent books are on different PCs running windows server 2003 and office 2003. The two PC's belonging to the same workgroup. One of them being run by Siemens PCs 7 process control system. I have ensurred running on both PC Netdde.exe. When excellent both books are on the same server they connect perfectly. When I run the client excel book on the other Pc (without changing something in the formulas of cells) the connection is lost. The DDE connection is approved on the PC server and this connection permission is full control for everyone. What is perhaps the reason for this problem? I think I missed a point. Can I get help for this. Thanks in advance for you.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the appropriate Forum TechNet. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/categories/

• How to attach two photos with window live photoshop

  How to join two or more pictures with window live photoshop... Please tell me...

  Hi puneetdeol,

  Thanks for posting your question in the Microsoft answers Forum. For any questions about Windows Live Photo Gallery, please visit the following link:

  http://windowslivehelp.com/forums.aspx?ForumID=cafb0556-8959-49b9-AFEB-635314aa02f3

• Two questions on the HP Envy 700-230ea before you buy

  I am looking to buy a HP Envy 700-230ea of PC World.  The plug that I saw didn't quite answer two questions that I have to solve before committing myself.

  1. the operating system is Windows 8.1 installed the 64 bit version (I need it to be)

  2. the machine is supplied with a 2 TB HARD drive.  But I need to add a second 2 TB HDD.  Is it possible to do it in the machine?

  On your HP UK Site, I would say that it comes with 8.1 / 64 bit and it has 3 internal hard drive bays; 2 external optical drive bays.

  Link http://www8.hp.com/uk/en/products/desktops/product-detail.html?oid=6753464#! % 3Dspecs tab

  Be forewarned of desktop computers HP ENVY do not come with a manual, just quick pictorial international owners set up guides, and there are no available records. The Windows 8.1 operating system can control, but for the computer itself no manual, it's like buying a new car, try to understand all the switches, levers and lights. Most are easy to understand, but some are not but I would like to contact PC World and make sure he has the 64 bit OS.

  Link http://www8.hp.com/uk/en/products/desktops/product-detail.html?oid=6753464#! % 3Dspecs tab

• Cannot use Office to distance between two machines to windows 7

  what I tried listed below:

  the other ping ok

  in vain telnet 3389 mutually

  Telnet itself 3389 ok

  netstat - year also list port 3389 is listening

  both machines are in the same network of 10.0.0.0/24, whatever cable or using a wifi connection, remote desktop never works. But I can use both of the two machines to connect to a server of windows 2008 with no problems.

  I tried to trun, disable the firewall of windows (profile), no luck; tried to turn off windows firewall, no luck; attempted to create a rule to allow access port 3389 from any ip address both of the machines, no luck.

  I have tried everything I can, no chance, no chance. who can help with this strange problem?

  Hello

  I suggest you to refer to these items and check the status.

  Remote Desktop connection: http://windows.microsoft.com/is-is/windows7/products/features/remote-desktop-connection

  Remote Desktop connection: frequently asked questions: http://windows.microsoft.com/is-is/windows7/remote-desktop-connection-frequently-asked-questions

  You can view this issue in the Windows 7 IT Pro TechNet Forums: http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/threads

  Thank you.

• Don't know which of my two copies of Windows 7 to use

  Hi, sounds like a stupid question, but I have two copies of Windows 7, the one installed on the machine 1 and another which is installed on machine 2, who is now dead.  I want to use the product key from machine 2 (these are these two retail licenses) on my new machine 3, but I don't remember which of the product keys I used to machine 2.  I'm worried if I'll take a guess and be wrong, it will disable the machine 1.  Any suggestions on the best way to go about this?  Thank you!

  Compare key - license in use

  Click Start, type: cmd

  Right-click on CMD

  Click on run as administrator

  At the command prompt, type the following command:

  slmgr - dli

  Press enter on your keyboard

  This will reveal the key to partial product that give a clue. Compare it with the keys that you have and it will confirm which copy is in use.

• How can I transfer? two computers running windows 7 and she wants to give me one of them, but it first wants to transfer or share all his stuff from one to the other.

  my mother has two computers that are running windows 7 and she wants to give me one of them, but it first wants to transfer or share all his stuff from one to the other. We network cables and such can I connect the on computers and share information from one to the other?

  Hello

  To connect two computers with a cable, not a router, it must be a crossover cable.
  These are special cables, but they are not expensive.

  (You can configure a network or a host group (see below))

  Connect two computers using a crossover cable (XP - Windows 7 may be the same)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-two-computers-using-a-crossover-cable

  It is a description however computer stores will sell them at low cost.
  http://en.Wikipedia.org/wiki/Ethernet_crossover_cable

  Amazon - example of a crossover cable
  http://www.Amazon.com/Belkin-components-CAT5e-crossover-cable/DP/B000067RFT

  --------------------------

  You can also use Easy Transfer

  Transferring files and settings: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/transferring-files-and-settings-frequently-asked-questions

  How Windows Easy Transfer makes setting up a computer easier?
  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-easy-transfer-make-setting-up-a-computer-easier

  Windows 7 Easy Transfer
  http://Windows.Microsoft.com/en-AU/Windows7/products/features/Windows-easy-transfer

  How to get an easy transfer cable
  http://Windows.Microsoft.com/is-is/Windows7/how-to-get-an-easy-transfer-cable

  ------------------------

  These should help:

  Create a homegroup
  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

  Homegroup from start to finish
  http://Windows.Microsoft.com/en-us/Windows7/help/HomeGroup-from-start-to-finish

  Access to files and printers on other homegroup computers
  http://Windows.Microsoft.com/en-us/Windows7/access-files-and-printers-on-other-HomeGroup-computers

  File sharing essentials
  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  =========================================

  More help at these locations: (Vista references also apply to Windows 7)

  Vista - LAN
  http://www.onecomputerguy.com/Networking/vista_network.htm

  Vista network and sharing Center
  http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htm

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Two questions for the community

  Question #1:

  So I have a laptop ASUS. And whenever he wakes up from his sleep (back cover), the image appears, however, that I had to wait a few seconds before I can drag up from the lock screen (2-3 seconds). So I wonder what he's slowing down

  Question #2:
  After the laptop awakens from his sleep, cmd.exe empty one/two pop-up windows or it seems to be empty since he came and close so quickly. So I was wondering what the cause.
  Notes:
  • Since it is an Asus laptop, there is the program "now we.
  • I also Kaspersky Internet Security 2013, if it even matters
  • I have 8 GB of ram
  • I brought the laptop 3 months ago and don't have a windows reinstall a month before (using the function of resettlement in "PC settings"

  Hello

  I'm just guessing, but I think the delay is probably Kaspersky Internet Security 2013.

  Displays the command prompt you see may be related to Kaspersky, commissioning, or possibly some drivers reload after sleep... Internet connection possible.

  There may be also some Asus features back on.

  What happened before the reinstall?

• pdf export two questions please!

  Hello

  I have success attached a pdf file to my module, but now I have two questions:

  1 when the user clicks or rolls over the link does not change the point mouse to display that link is there.

  2 I tried my module on our server but not load the attached pdf file.  I clicked on the box in the pdf attached to the publication stage and it did download it but it changed its name to the name of the course.  When I looked at the link in the browser window, he looked at the folder in which I was initially to help to save my work.

  Help!

  Hello Devon,

  1. I guess you used a click box to make the connection. In this case, you can open the properties of the click box and go to the Options tab. You'll find the setting 'display the cursor hand on 'hit' area '. Activate it, and then your first problem is resolved.

  2. the link to the PDF file must be the relative path - not the absolute path. If your PDF file is located in the same directory as your Captivate swf main then just enter the name and no path ("mypdf.pdf").

  / Michael

  Click here to visit the blog of www.captivate4.com

• BootScreen shows two installations of windows

  Trial and error, try to install windows via Bootcamp 10 in my MacPro 2008 (3,1) caused two windows appear when I press Alt/Option to the start-up of the facilities. None of them works. I El Capistan SSD drive is mounted on a map of Apricorn speed X 2 with another plugged on SSD card, and I have four data disks in my 4 bays.

  How can I remove the two Installations of Windows to appear? So far, I have attach each disc EFI of my order from command line "utildisk list" in accordance with this article and removed my reEFInd folders.

  

  Hello Pascal88,

  Thank you for using communities of Apple Support.

  I see you are trying to install 10 Windows on a Mac Pro (2008).  Your model of Mac does not support Windows 10, those listed below support it:

  Computers Mac taking supported Windows 10

  The following models of Mac supports the 64-bit versions of Windows 10 when it is installed using Boot Camp. About this Mac to see what Mac you have, then check this list to see if it supports Windows 10.

  • MacBook Pro (retina, 15 inch, mid-2015)
  • MacBook Pro (retina, 13 inches, early 2015)
  • MacBook Pro (retina, 15 inches, mi 2014)
  • MacBook Pro (retina, 13 inch, mid-2014)
  • MacBook Pro (retina, 15 inches, end of 2013)
  • MacBook Pro (retina, 13 inches, end of 2013)
  • MacBook Pro (retina, 15 inches, beginning 2013)
  • MacBook Pro (retina, 13 inches, beginning 2013)
  • MacBook Pro (retina, 13 inches, end 2012)
  • MacBook Pro (retina, mid-2012)
  • MacBook Pro (13-inch, mid-2012)
  • MacBook Pro (15-inch, mid-2012)

  • MacBook Air (13 inch, early 2015)
  • MacBook Air (11 inch, early 2015)
  • MacBook Air (13 inches, beginning 2014)
  • MacBook Air (11 inch, early 2014)
  • MacBook Air (13 inch, mid 2013)
  • MacBook Air (11 inch, mid 2013)
  • MacBook Air (13 inch, mid-2012)
  • MacBook Air (11 inch, mid-2012)

  • MacBook (retina, 12 inch, early 2015)
  • iMac (retina 5K, 27 inches, end of 2015)
  • iMac (retina 4K, 21.5 inches, end of 2015)
  • iMac (21.5 inch, end of 2015)
  • iMac (retina, 5 k, 27 inch, mid-2015)
  • iMac (retina 5K, 27 inches, end of 2014)
  • iMac (21.5 inch, mid-2014)
  • iMac (27 inch, at the end of 2013)
  • iMac (21.5 inch, at the end of 2013)
  • iMac (27-inch, late 2012)
  • iMac (21.5 inch, at the end of 2012)
  • Mac mini (late 2014)
  • Mini Mac server (end of 2012)
  • Mac mini (late 2012)
  • Mac Pro (end 2013)

  Use 10 Windows on your Mac with Boot Camp

  The latest version of Windows, which can be installed via Boot Camp on your Mac Pro 2008 is Windows 7.

  Install Windows 7 and previous versions on your Mac using Boot Camp

  Take care.

• How to get assistance from mozilla to answer questions for windows when I use a macintosh computer

  How to get assistance from mozilla to answer questions for windows when I use a macintosh computer?

  Look on the right side of the knowlegde base articles, where it is said ' help to ". Here, you can change the operating system and the version of firefox. The content of the article will adjust.
  
  If you ask a question on the help forum, you can simply say this in your question.