relative to the signature of an application

Similar Questions

• Two questions relating to the signature using restricted code API: s

  First question

  I have a library that contains classes that requires the signature in order to use API:s. limited one of the functions in the library uses "persistent storage". My application accesses the library import library module, then instanciates and calls the function that I need.

  Is it enough to have signed library or don't call asking the library must sign too?

  Second question

  Is it possible to configure the simulator so it actually tests that the modules using API: s limits are signed correctly?

  Check the Simulator definition "activate the safety of the device. When this setting is enabled, the Simulator checks would be signatures almost like a true pocket computer. For your application, which should be pretty good. If your module is missing a required signature, the simulated Pocket will complain even as would a normal hand.

• Various problems related to the tests for Oracle Applications R12 PreInstall HCVE

  Hello world
  
  I am preparing a Linux machine for installation of Oracle Applications R12 and currently I have several problems with the HCVE tests that are part of the ANR ([Doc ID 250262.1| https://metalink.oracle.com/metalink/plsql/f?p=130:14:4000869102561861013:p14_database_id, p14_docid, p14_show_header, p14_show_help, p14_black_frame, p14_font:NOT, 250262.1, 1, 0, 0, helvetica]). Here are the first two problems:
  
  1. when I run the RDA (. rda.pl t hcve) and select a test (in this case, "Oracle Database 11 g R1 (11.1.0) PreInstall (Linux AMD64)"), the script wonder of the JDK 'House '. Why the script asks if the installation process will install JDK? If I jump it (i.e. just press enter), the JDK test shows up as failed in the results. What should I put here?
  
  2. the tests 'process limit' and 'Limit descriptors' fail both:
  
  A00120 doesn't have a process boundary less 16384
  A00130 FAILURE of lower limit to 65536 descriptors
  
  I put these two values in /etc/security/limits.conf according to the instructions here: [Doc ID 761566.1| https://metalink2.oracle.com/metalink/plsql/f?p=130:14:4000869102561861013:p14_database_id, p14_docid, p14_show_header, p14_show_help, p14_black_frame, p14_font:NOT, 761566.1, 1, 1, 1, helvetica]
  
  Here are the lines I added to limits.conf:
  
  # To install Oracle (MetaLink Doc ID: 761566.1)
  * hard nofile 65535
  * soft nofile 4096
  * nproc 16384 hard
  * soft nproc 2047
  
  Why so this test fails?
  
  -Kyle

  Kyle,

  You can submit feedback and send an email to Support of Oracle ([email protected]). The link 'Submit comments' is available in most of the documents of Metalink GDR (Diagnostics).

  Kind regards
  Hussein

• Acrobat to print DC question. When you print all the pages in my PDF printer, Acrobat creates a HUGE file. Looks like it is including all the signature features.  How to disable this option?

  When you print a simple PDF document on my printer (PDFXchange) PDF creates a huge file.

  For example, I have a PDF without features signature inside. It is 723KB.

  When I ask my CD player to print on my printer, it generates a file 19, 591 KB.

  How can I avoid that my CD player to make these large files?

  I think that it is related to the "Signature" whole feature that has been added to Reader 11.  Because before that, my impression works beautifully.

  Thank you

  Rich

  Sorry, would of noticed earlier that you said that you were using a third-party printer.

  I think it's probably just a matter of settings, but if you were able to solve it by downgrading to XI, then this is good...

• How can I use the signature keys in my bweb application works

  Hi all

  How can I use the signature keys in my web work BlackBerry application, I'm looking for video, guide, documentation, step-by-step flow link

  Finally how to properly test it on a Simulator before giving the cod to the words App validation team

  Thanks for your time

  Hello

  Have you seen the guides posted here?

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_publishing/signing_your_app_1920008_11.ht...

  What stage are you having problems with?

  Erik Oros

  BlackBerry Development Advisor

• The application failed codesign verification.  The signature was invalid, or it was not signed with an i

  I tested the app on the iPad and everything works great. (including in app purchases and subscriptions)

  When you submit the request using "Application Loader". I get the following error:

  "Application has no codesign verification.  The signature was not valid, or it is not signed with a certificate of Distribution of iPhone»

  I checked I have selected the correct certificates and can't seem to import into Keychain Access and that they are NOT expired. I don't have the luxury to recreate as other applications were submitted.

  What can I do to diagose the problem?

  Chris Muench

  Turns out that we had a problem with our certificate of distribution, it works fine now.

• Some issues related to the digital signature on an interactive form

  I just finished a contract of interactive advertising with a 128-bit encryption allowing recipients to submit CC of information securely to our publishing company. Even if the form in the upper fields allow to type the name of an authorized person, the signature on the bottom line is having problems because so that everyone to sign, they need a digital signature.

  (1) is it necessary? If so, is it possible to automate it for customers, so they do not have to go through the process of creating one?

  (2) how to create a digital signature for my partner and have the form SUBMIT button channel back to his address of e-mail instead of mine (which it does because of another interactive form, that I created in which I was the person for returns)? I couldn't find anything in the 'properties' of the OK button that allowed me to enter an e-mail address.

  I thank very you much for your help here. It's time-sensitive, because we need get the package ASAP.

  1 if you need a digital signature, then set up a digital ID is required to sign a digital signature field. So the question is really more fundamental: you need people to sign the form with a digital signature? If you say yes, what are the reasons?

  2. If you use the distribution process in Acrobat so thatt you can collect form data in an answer file, you should distribute the form using the other person with Acrobat installed on machine.

  If you don't want to do this and you want to only collect the documents returned without putting the data in an answer file, you can configure your own submit button using any email address you want and that you do not use the distribution process. You must activate the document reader and then send or otherwise get for users. How to configure the Send button depends on how you want it to run exactly and which version of Acrobat you are using. More information can be found here: http://acrobatusers.com/tutorials/form-submit-e-mail-demystified

  If you want to continue to go through the process of distribution and want to change the email address it uses, you can change it to: Edit > references > identity > Email address

  You will then have to redistribute the form with a copy of the form as it existed before your first distribution. The answer file will be on your machine.

• Why print PDF with signature a block behind the signature box?

  I received a PDF file with an electronic signature placed on a signature line image. It seems, when you view the document in Acrobat Reader or Acrobat Pro and preview printing even seems OK. When I send the document to a PictBridge compatible printer, it puts the signature image on a black box instead of a transparent box. I tried printing to a monochrome vs. color printer, tried with and without the option "print in grayscale", attempt to print Document only, Document and annotations and Document and stamps. I don't know what else to watch or what parameters are related to how a signature will print. The document is safe, so I cannot change the properties of the signature or the PDF file.

  Hi joshc81577761,

  Please try to check with the option "Print as image".

  Also cocher check with the different document, try checking with printers different (Drivers day).

  Check with the name with the name of the application by means of which the document was created.

  Also, try to re-create a document with the same properties & try to print the document to reproduce the problem.

  Kind regards

  Christian

• How can I send Acrobat DC to the signature request details of the sender?

  So I tried to use Acrobat DC for the first time the other day to manage the signing of an agreement - a process which we just finished historically using echosign web interface (including the definition of the form fields, etc.)

  Despite the introduction of fields as 'necessary' and with the role of participant "sender", at no time summer I asked for them to be filled during the sending process (which at the time was not unexpected, given we have a tendency to use "sign, so I sign" on echosign). However, when the client has signed the agreement, he was not sent to me for signature, but was simply listed as "signed."

  I looked into other conversations relating to the fields of signature here and see talk of supposedly able to sign inside acrobat before sending them (I don't want to do that, we sign last!), but when I tried, my signature field is simply treated as a text field by Acrobat.

  Is the only way to manage the signatures of the sender correctly to continue to use the interface web echosign to send documents?

  TIA

  Phil

  Hello Susanb9180290,

  In Desktop application, the option "I have need to sign" as the first or last is not available from the web interface. I took this as a feedback and it will certainly go. As a solution, if you sign the document first, then you can select "fill out and sign' to apply your signature and select"Get others to sign"on bottom right.

  Let me know if you need help!

  -Usman

• Once I click on "Solution available? I have found that the signature of the problem and the additional info.

  What should I do to actually solve the problem? APPCRASH. The problem is the host process for Windows Services has stopped working

  Hello

  1. when exactly you get this error message?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to put your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Also, you can access the event viewer on your computer and check the newspaper of windows for messages/error codes important related to the question and after return from errors in the event viewer.

  See the link below for more details:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Hope this information is useful.

• When I opened e-mails. doc or pdf, this message appears: "the application failed to start because its side-by-side configuration is incorect. Check the log of events applications for more details. »

  Original title: side-by-side configuration is incorrect

  When I opened, try opening some emails. doc or pdf, this msg appears: "the application failed to start because its side-by-side configuration is incorect. Check the log of events applications for more details. »

  I'm going to log events, but how to solve the problem by putting the RIGHT configuration to?

  Thanks in advance

  Hello

  1. when the question is is produced?

  2. you remember of any change to your computer before the problem?

  3. are you using a 32-bit operating system or a 64-bit?

  Please visit: What are the information in the event logs? (Event Viewer)

  In the meantime, follow these steps and check if they help.

  Step 1:

  I suggest you install the Visual C ++ 2005 Sp1 Runtime and check if the problem persists:

  Microsoft Visual C++ 2005 SP1 Redistributable Package (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200b2fd9-AE1A-4a14-984d-389c36f85647&displaylang=en

  Step 2:

  If this does not resolve the issue, I would have you done SFC scan on your machine to check if the problem is related to missing or corrupted system files.
   
  Aziz Nadeem - Microsoft Support
  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• host of the print driver for applications stopped working 5100cn

  I don't know if my previous attempt at this post went through...

  I've recently upgraded to an SSD and a new installation of won 8.1 (exactly the same thing I had on my old HDD) and now when I try to print from my Dell 5100cn I get the following error:

  Host of the print driver for applications has stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: splwow64.exe

  Application version: 6.3.9600.17480

  Application timestamp: 545871c 1

  Fault Module name: dlpsc51r.dll

  Fault Module Version: 0.3.1281.4200

  Fault Module Timestamp: 4324d 269

  Exception code: c0000005

  Exception offset: 000000000000cd 87

  OS version: 6.3.9600.2.0.0.768.101

  Locale ID: 1033

  Information additional 1: 1 has 72

  More information 2: 1a7236b9868d6b38d3fd37b43ff05b06

  Information additional 3: 269 b

  Additional information 4: 269b7fc9d660b4191041ae78f0745b83

  For the life of me I can't figure out what I'm doing wrong... The printer still works fine if I swap back to my old HDD so I know its something I do (or not do)... I tried to figure this out all day and have installed several drivers in normal mode and compatibility without result.

  When I open devices and printers on the old drive HARD the printer name reads "Dell Laser Printer 5100cn PCL6" but when I check the devices and printers on my new SSD it reads "Dell Printer 5100cn PS"... So, I know that I do not want to install the same as I have done before and I can't understand what I installed... I use a Toshiba Satillite P75 A7200 if that matters...

  Help, please

  Hi Roydub83,

  Thanks for writing on the Dell Community Forum.

  Please uninstall all the printer driver on the system installed for Dell Laser 5100cn printer and then install the driver on Windows 8 using this link http://dell.to/1ETptNA. Install in compatibility mode if the installation does not engage.

  Answer please if you have any other questions.

  Have a nice day ahead.

• IPS is impossible to pass the signature

  MY client pointed out that IPS modular is impossible to pass the signature in the ASA5510, there already purchase the license.

  Can I upgrade the IOS ASA or do something else?

  What is the formal process to solve this problem?

  the error is as below:

  Cannot upgrade the software on the sensor.

  -This upgrade must be installed on a sensor with 4 engine version

  The currently installed version of engine is 1.

  SLPG-BOH-AIP # show version

  Application partition:

  Cisco Intrusion Prevention System, Version 7.0000 E1

  Host:

  Domain keys key1.0

  Definition of signature:

  Update of the signature S302.0 2007-09-17

  Virus update V1.2 2005-11-24

  OS version: 2.4.26 - IDS-smp-bigphys

  Platform: ASA-SSM-10

  Serial number: JAB09410434

  License expires on: 26-Sep-2011 UTC

  Sensor time is 192 days.

  With the help of 609878016 of 1054670848 memory available bytes (57% of use)

  system is using 17.4 M off 29,0 M bytes of disk space available (60% of use)

  the application data uses 45.0 M 166,8 M bytes of disk space available (28% off

  its use)

  start using 35.2 M off 68.6 M bytes of disk space available (54% of use)

  MainApp to Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru

  nning

  AnalysisEngine-Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru

  nning

  2007_SEP_26_11_54-Z-CLI (release) 2007-09-26 T 12: 09:32 - 0500

  Upgrade history:

  IPS - K9 - 5.1 - 7 - E1 10:24:03 UTC Friday, August 5, 2011

  Version 1.1 - 7, E1 0000 recovery partition

  SLPG-BOH-AIP #.

  You must upgrade the IPS module to the latest version first before that you can update the signature. The current version of 7.0000 E1 software is very old, and the latest available version is now 7.0.5a (E4). E1 engine is very old and is not compatible with the signature that runs on the E4 engine.

  Here are the release notes for 7.0.5a (E4):

  http://www.Cisco.com/Web/software/282549758/50172/IPS-7_0-5A-E4_readme.txt

  You need to upgrade the module running at least version 5.1 (6) E3 before you can upgrade to 7.0.5a (E4).

  Once the IPS module has been upgraded to version 7.0.5a (E4), you can update to the latest signature.

  I hope this helps.

• Two of the application window are enabled at the same time when I click on an icon in the taskbar of an application.

  When I open a window of the application in Windows 7, and then press the keyboard windows, if I click on an icon in the taskbar to another window, I find that each of the two windows is activated. I use Spy ++ to monitor both windows messages in this scenario and esteem that both windows obtained the WM_ACTIVATE message. If I right click on an icon in the task bar of the window of the second just after press the windows key, I find that the first window will activate everything first and soon to be switched off.  What is a feature of the taskbar of Windows 7 or a bug in Windows 7?

  Hello

  The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the community of developers in the MSDN (Microsoft Developer Network) following the link:

  http://social.msdn.Microsoft.com/forums/en-us/categories

• The August 2012 calendar items are not available in the calendar of the modern user interface application

  The August 2012 calendar items are not available in the calendar of the modern user interface application.  They are available through a web browser and the application MS Office Outlook.  Y at - it a setting or another way to access old calendar items in the modern user interface.  The phone application has the same problem.

  Original title: elements of August 2012 calendar

  Hello

  I suggest for the link and run the troubleshooting utility Apps and follow the other steps in the article:

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-in/Windows-8/what-troubleshoot-problems-app

  See also:

  Application of calendar for Windows: FAQ

  http://Windows.Microsoft.com/en-in/Windows-8/calendar-FAQ

  Stay in touch with email and calendar

  http://Windows.Microsoft.com/en-us/Windows-8/mail-calendar#1TC=T1

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.