TWO wanted work stations, one with my working files and other with personal folders. It seems that spaces works with windows, no records.

Similar Questions

• I have an acer aspire one with windows xp preinstalled ~ y at - it a way to get a backup copy of the operating system? It is not working properely

  I have an acer aspire one with windows xp preinstalled ~ y at - it a way to get a backup copy of the operating system?  It does not work correctly

  See http://acer.custhelp.com/app/answers/detail/a_id/2631/kw/factory%20restore%20windows%20aspire%20one/related/1

• Ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter. fact that associated with MSSE PUM & the boxes unchecked in MS security Center.

  Original title: PUM. Disabled.SecurityCenter

  I recently removed "patch system" of my Dell computer XP. Malwarebyte s was the only software to do. MSSE caught, but couldn't fix it. I then updated & ran MSSE on my Toshiba - no threats not found. I then ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter both at the Date of the registry in HKLM\SOFTE\Microsfot\SecurityCenter\AntiVirusDisableNotify & HKLM\SOFTWARE\Microsfot\securityCenterFirewallDisableNotify.  These two have been listed bad: Good (0) (1).  In the Malwarebytes wesite, I read that this has something to do with MSSE. In a commentary, he says it occurs if, in the MS Security Center, the notification "Notify me if my computer might be at risk because of my virus protection software settings" is unchecked.  I then went ahead & check all 3, firewalls, viruses & automatic updates. My computer seems to work well, except that the fan runs all the time (there are a lot of processes running & the CPU usage is very--often 100%, but the computer works fast).

  My questions are: 1) the PUM associated MSSE & the boxes unchecked in MS security Center; (2) should I click on "ignore" in the Malwarebytes scan? 3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?  Thanks in advance for your help.

  PC fan2

  Hello

  (1) is associated with MSSE PUM & the boxes unchecked in MS security Center;

  The following thread might answer this question: http://forums.malwarebytes.org/index.php?showtopic=69859

  (2) should I click on "ignore" in the Malwarebytes scan?

  Yes

  3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?

  Only, run antivirus software at the same time. Firewall must be performed, evil-ware bytes can be run at your pleasure.

• Is it possible to buy a new computer with Windows XP or buy one with Windows 7 and remove it and install Windows XP? I have

  I now have a computer with Windows XP and wanted to buy a new computer.  All new computers come with Windows 7.  Is it possible to buy a new computer with Windows XP (or buy one with Windows 7 and remove it and install Windows XP)?   I like XP and have talked to people who are not really happy with Windows7 and holds XP back.  AND I also discovered that my printer is not compatible with Windows 7 - it is not that I love him and want to keep it.  I can't afford to buy a new computer AND printer, since I have been unemployed for more than 2-1/2 years.   I would like to use XP on a new computer!   I would appreciate it if you could let me know what is possible or if I'm stuck with my old computer.  Thank you very much!

  Probably not, you will find a computer with XP on it.

  If you buy a computer with Windows 7, you will first need to know if it would be compatible with Windows XP. Probably not, because they are not designed for XP and drivers are not available.

  Unless you want to spend the time, you're stuck with your old computer.

• can I use my C3180 all-in-one with windows 7?

  can I use my C33180 all-in-one with windows &?  and if yes how I have set up?

  Yes you can, you can download drivers from here

  Also, click Start and then right-click on computer and left click on properties to find out if you have 32 or 64 bit Windows 7.

• InDesign file I want to simply export to a jpg file and integrate the jpg (or png) in an e-mail...

  I have an indesign file I want to simply export to a jpg file and integrate the jpg (or png) in an email... no link, just... show all copy appears fuzzy, no matter what I do... what I am doing wrong?

  I agree with you Peter.

  However, when inserting to email, certainly in the office, the format returned from any other format, that is, png or another format of JPEG file.

  I do as Peter suggests, open the PDF file in photoshop - then save to the Web but choose JPEG compression max.

  It is usually the best solution.

• With the help of HP Officejet J3680 all-in-One with Windows 7

  I knew how to use my printer very well with my other computer has Windows XP, but when it crashed and I bought a new computer with Windows 7, I can't find the things that I used to use as a tool box, indicator of level and troubleshooting options of ink.  Is there a way I can always find these information in Windows 7?  I find it too confusing to set my printer to do what I want it to do.  I can't make it work one way, but using a different option, I was able to understand

  See if this page will help:

  http://support.HP.com/us-en/document/c02463264

• What external optical drives are compatible with the Acer Aspire One with Windows 7 Home Premium 722

  What external optical drives are compatible with the Acer Aspire One 722 with Windows 7 Home Premium OS.  I need to make the backup disks and install the CD software.

  Thank you.

  More external ODD will work just make sure it's an external power source. This allows not to take a lot of power to the unit.

• I moved my printer from an xp computer to a new one with windows 7. It prints ok but I wonder

  HP Photosmart C4680

  I have used it with Windows XP and now have a new computer with Windows 7.  the person who connected just plugged and it seems to print OK but no HP locations appear on my screen such as the icons etc.  Do I have to insert the original disc and reinstall it or will be everything that does not work on Windows 7

  It worked fine after installing again.  Thank you

• Keep having the message "Reboot and select good boot device ', but seems that there is a work around

  I've read other posts on this message in the community, but think that mine is in a different situation.

  A week ago, I started having this error message when I booted my PC (win8, 64-bit). Fortunately, I have the new bootable USB key. After that I tried everything I could think, (restore and refresh), this message always shows up when I start the PC. So I decided to do a complete reset to factory with the option State "delete all data".

  I was able to complete the procedure. However, I see new things,

  If I restart the PC, I can boot in normal mode, without the error message.

  If I turn off the PC, then turn on again, the error message is back. I found that there is something for the workaround. When the system boots, I hit 'ESC' key and 'remove' to go to the bios interface, go to the 'boot' page, change the order of boot on USB, then change it back to hard drive (so in fact that there is no change), press F10 to save and exit. Then, I can boot into normal system.

  Why is this? Anyone can help with this problem?

  Kind regards

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you get an error message when you work on your computer.

  This could happen because of changes made to your computer.

  I would like to know some information.

  1. What is the brand and model of your computer?
  2. Have you changed boot priority on hard drive?
  3. Did you change your computer before this problem?

  This problem may occur if your hard drive is not detected in the BIOS as first boot priority. You can go to the BIOS (Basic Input Output System)and change the boot drive order so that the hard drive comes first as a boot priority. You should be able to start Windows normally after you save it in this configuration.

  If you would like more information on the BIOS settings, consult the computer manual or contact the manufacturer for more information.

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this helps. Please let us know the results. We will be happy to help you further.

• How to import bookmarks on a XP computer to one with Windows 7, both have Firefox 4.o

  The XP computer is a 5 year old Dell and Windows 7 is a new laptop HP Pavilion G7. I was confused about the differences in the appearance of Firefox on the two as they are the two v4.o. I managed to download my favorites in a file .json from my XP computer, but I don't see where I can import the file on my Windows 7 laptop. I checked the program for Firefox in Windows 7 files and saw a chain preferences.js file. I didn't know if I should transfer the bookmark.json file in this folder to "import bookmarks.

  To import the bookmarks into Windows 7 computer, click on the orange Firefox button in the bookmarks submenu, select "Show all bookmarks" to open the bookmarks library. In the bookmarks library, select "import and backup" menu, then click on "Choose file" and the restoration. You can then select the JSON from the other computer.

  FYI, the new interface is only by default on Windows Vista and Windows 7. To get it under Windows XP, you must hide the menu bar. Do, in the view menu, select Toolbars, then click on the entrance to the "Menu bar".

• I have a book on the step by step Microsoft Windows XP and I want to learn what are the practice files, and how are they used?

  Now I am learning something about this book that I have on the Microsoft Windows Xp step by step book, and I want to start learning what I need to learn, but I need you all to be a little patient with me here. If I make mistakes its because I am only a human being I'm not a machine. First of all, let me explain something to everyone here. A person must be motivated by trying to do here. And for me, I found a motivational inspiration. A very

  beautiful child that was posted on my homepage to my computer. some other people keep their photos of children and everything on them. I ask that I get this one thing to keep, if this isn't a script or anything harm my computer. You can all tell me this good and what are these practice files, and before you'll understand that I don't have service Pack 1, 2 and 3. already in my computer now.

  .. What are these practice files?

  If a CD accompanying the book Windows XP step by step , the exercise files are on the CD.

• Problem with the 2007 Hallmark card studio deluxe installation and get error message "Error 1904.Module that cannot save c:\windows\syswow64\msxml4dll".

  Original title: 1904.Module error cannot save C:\windows\SysWOW64\msxml4dll. HRESULT 2147023782 contact your support staff

  I want to install hallmark card studio deluxe 2007 and I got this message

  C:\windows\SysWOW64\msxml4dll Error 1904.module cannot save. HRESULT 2147023782 contact your support staff.

  Someone knows how to fix this?

  Thank you

  Hi Roman,.

  Thanks for posting in Microsoft Community!

  It seems that you have a problem with the installation of Hallmark card studio deluxe 2007 and will receive error message "Error 1904.Module than c:\windows\syswow64\msxml4dll cannot be saved."
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. deal with any issue when installing any other program?

  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest you to run the fixit and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest to perform the clean boot and see if you can install the software.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.
  Method 3:
  If the problem persists, I suggest you try to remove all the temporary files in the temp folder. And check if it helps.
  Follow the steps to clear the temp folder:

  a. click the Start button and in the search in %temp% bar and press ENTER.

  b. the Temp folder opens, press on Ctrl + A , and then press delete.

  Note: I suggest that you backup important file or a folder in the Temp folder.

  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• DeskJet F2280 all-in-one with Windows 7, does not analyze, was working fine

  I have an all-in-one Deskjet F2280 my operating system is Windows 7, everything was perfectly working until recently I went to scan a document and nothing happened, the power button blinks for about 30 seconds then stops. I deleted the driver and downloaded the driver date several times but always the same problem - full while downloading I get a fatal error Code 2203, I tried the solutions proposed on the HP troubleshooting page but always end upward with the same problem. I can print & copy perfectly. Please can someone help?

  Hello swallowsretreat

  When you mention that you have tried the HP troubleshooting page you were talking about article "fatal error" error 2203' (MSI 2203) displayed for HP Software Installation in Windows? ' " Otherwise I have suggestion follows first to try to resolve the first fatal error.

  Fatal error MSI message relates to the Microsoft Software install (MSI). As such they problem may be related to more that the software you are trying to install and be linked to the operating system.

  Let me know if you continue to receive the error when installing even after the rest of the article for fatal error 2203. Also have you tried to install the printer on another computer?

• PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work

  
  

  Hey @Manu37520,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.