DeskJet F2280 all-in-one with Windows 7, does not analyze, was working fine

Similar Questions

• Unable to print on HP Deskjet F4500 all in one series, windows 7

  Computer laptop 64 bit Windows 7.  I cannot print on my HP Deskjet F4500 all in one set.  Said drivers not installed but unable to install successfully.
  Can help you with any advice please.
  Thank you
  Sheila Holmes

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

  HP Deskjet F4500 printer driver download

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• can I use my C3180 all-in-one with windows 7?

  can I use my C33180 all-in-one with windows &?  and if yes how I have set up?

  Yes you can, you can download drivers from here

  Also, click Start and then right-click on computer and left click on properties to find out if you have 32 or 64 bit Windows 7.

• My computer with Windows 7 does not display photos in folders when you open a folder where are saved in photos.

  My computer with Windows 7 does not display images in folders when you open a folder where are saved the images there, I do not see any image photo immediately. I don't see it when I click Open the pic. Then for the next photo, I have to click Open once again, one by one. So without opeing one by one, I can't have see images, it is very difficult for me to manage all the images.

  The following article might be worth a visit:

  Windows 7 - How to enable or disable
  Thumbnails in the Explorer of Windows 7
  http://www.SevenForums.com/tutorials/11738-thumbnail-previews-enable-disable.html

• Laptop with Windows 7 does not connect with the router

  (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

  (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

  Hi Roger,

  We would like to learn more about the issue. You get this message when you launch your Internet Explorer, or when you work with all Office applications?

  You can also try the solution posted by Redcar92 on this link: 8ExtPEx.dll is missing.

  Let us know how it goes.

• DeskJet 2050 all in one J510: installation HP deskjet 2050 all-in-one with windodws portable

  Hello

  Top of greaded for the new laptop that has windows 10 and can not get my printer to be seen.  When the printer is connected through the USB port, computer laptop just scan, load an application for wireless use won't see or interact with the printer as the device is not a wireless model, (only 5 years).  printer still works great on Windows 7 laptop, but the laptop keeps freezing as is the reasosn for the upgrade.

  Question is how to make the new laptop to use my printer?

  I still have the domain controller that came with it, but it will not work installation on the laptop W10.

  Help, please.

  Thank you

  Denise

  @ladyzq

  Welcome to the HP Community Forum - we are a community of fans of HP !

  If you did not, please install the software of full functionality for the printer.

  and / or

  • Start here: HP Print and Scan - Doctor help solve printer problems

  Printer, one of

  "Deskjet 2050 all in one J510 ' (5)

  Full software functionality (the printer program):

  Name of the file:

  DJ2050_J510_1313 - 1.exe

  (49.0 MB)

  Help, suggestions and examples:

  Install the full features software - printer

  Operating system recently migrated to Windows 10 and re - install the printer software:

   

  1. If you use a USB cable to connect the printer and the computer, disconnect the cable
  2. Create a Restore Point >
  3. Reinstall / update your PDF reader (Adobe Reader DC / Foxit)
  4. This works best if the updates of Windows (10) computer are up-to-date - check if you are unsure
  5. Update your drivers HP (or another computer of the seller) - printing software like updated drivers
  6. Open printer pilot site support Page >
  7. Download a new copy of the Full Feature software >
  8. Remove the printer from programs and features existing software / applications and features / all Apps / devices and printers >
  9. Shut down the computer > start and connect >
  10. Install the full feature software (find in your downloads folder > double-click the file) >
  11. Restart the computer and log in to complete the installation

  Article (s) of interest include:

  • Start here: HP Print and Scan - Doctor help solve printer problems
  • Preparation
  • Extras, tips and some Cool stuff > HP, Installation Help and Diagnostics information
  • Create a Restore Point
  • Remove the printing software (two parts)
  • Download and Installation
  • Integrated webserver (EWS)
  • 10 Windows updates (check)
  • Restart all
  • Analysis of the Options of program *

  ** Cool independent scan programs (thanks to greenturtle for links to HP extended Scan!)

  Reference:

  Options of the digitization program

  Sections of the document include:

  HP Extended Scan - Single, multiple scans, automatic framing!

  NAPS2 - not another scan PDF

  And others...

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• HP 1315 all in one printer, windows 7, can not find the solution Center.

  Mr President

  It was working fine, 1315, printer all-in-one. lately every print, I had off and ON the machine. Today, to uninstalled and then downloaded from the additional driver section all the reqd. I installed. but the main exe from the file ' AIO_CDB_NonNet_Full_Win_WW_130_141 '.

  do not settle. ...

  " Solution Center is not installed and to get hp support, I downloaded hp printer scan cylindre diagnosis and when I run... another message comes" hp photosmart essential scan.msi isn't available... what shud I do?

  I don't know what to do next?

  kindly help.

  Hello pajitmenon,

  Seems that the installation of the software is corrupted somehow. I recommend "rubbing" the software current and 'nine '; To do this, follow the instructions below:

  1. click the Start button and type %temp% enforcement

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download (again) the drivers and full software functionality from the link below

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1 & CC = US & DLC = in & LC = on & os = 4062 & Product = 374568 & sw_lang =

  10. run the download to reinstall the printer

• 7520e HP photosmart all-in-one: 7520e photosmart printer, does not connect to web services

  My printer was working fine, I share wireless between your desktop 8.1 windows 64-bit, windows 7 64 bit desktop and a windows 8.1 64-bit laptop, the latter is rarely used although it remains connected.

  Now, for some reason, my printer cannot connect to web services, it says an error has occurred, but you may still be able to use some of our services.

  I can connect to e print without any problems and it is connected to my network and wireless, I managed to send faxes, but only from the top of the charger of my printer page and not my computer, but at least it works, I can do a sheet of coverage since the fax software.

  Is this one of printers who had a few apps taken away from him? If so, this may be the problem with the web services.

  I uninstalled my software to print several times and re installed as has a HP technician but still no luck.

  Any ideas please.

  It print and scan very well although I have on my desktop windows 8.1 for the moment, I still have to

  install it on my windows desktop 7. Last night, when the technology installed on my windows desktop 7, he says you correctly it installed-windows 8.1 desktop, which of course was incorrect. I am the administrator on office computers, no homegroup, or user accounts, I just choose to share.

  Hello @emma22,

  Appreciate your efforts.

  Please check the picture below:

  

  Go to printer EWS - network - wireless - IpV4

  Click the manual IP address - suggest a manual IP address.

  Select the manual DNS, then choose 8.8.8.8 and 8.8.4.4

  Save the settings.

  Let me know how it goes.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• How can I get my woking of golf with windows 7 premium Simulator it was working very well with xp___

  HOW CAN I GET MY P3 PRO swing work with windows 7 it was working fine with xp

  Hey golfer.

  You should check whether the game is compatible with Windows 7 or not. Here is given is the link to verify the compatibility of all software\hardware.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  If the game is not compatible, to work around the problem, you can try to install it in Windows XP compatibility mode and check if that helps.

  To run the troubleshooting program compatibility Troubleshooter

  1. Open the program compatibility problems by clicking on the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Under programs, click run programs made for previous versions of Windows.
  2. Follow the instructions contained in the resolution of the problems.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  For more details follow the link below.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Synaptics PS/2 Port Touchpad has stopped working. (Acer Aspire E-15 with Windows 7) but a USB mouse works fine

  It was working fine until this morning. When I turned it on I was told an update for flash player was available and I hit install. There was a mistake and since then no touchpad. I tried the news of mouse in the Control Panel, but he said it works very well. Any ideas?

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (works on win 8 & win 10)

• HP Deskjet F2280 all-in-one [manufactured Nov. 2008] compatibility with Windows 8

  Good afternoon

  I'm about to buy a Dell Inspiron with Windows 8.

  There is that a single above label printer that has the following numbers:

  CN8BA4ROW S/N CN

  CB683-64001 on a bar code

  Regulatory model: VCVRA-0706

  The word 'model' before a 'number' does not appear.

  I still have the installation disc, but I guess it will be obsolete now.  Is it not possible to download up-to-date software when I get my new laptop Windows 8 and I have to pay to do this, please?  I'm not computer literate, so I need simple tips, step by step.

  Thank you in advance.

  Thank you.  Responds to "Magic".

• PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work

  
  

  Hey @Manu37520,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• PSC 1315 all-in-One with Windows 7 (64), SP1, prints too high on the page.

  My printer prints too high on the page. Regardless of the printer or document settings, the first line prints at the top of the page. This problem is not present with Notepad, but appears with WordPad and Open Office Writer. How can I pay for this investment?

  Response to Shane_R:

  I spoke too soon. I think that I was not successfully download these drivers because I received messages that the original driver has not been installed. (Don't know why it worked once.)

  In any case, I found an old link to the HP site for my all-in-one model that provided a full hybrid software and driver download makeover. I installed it correctly and so far everything works better than before. Thanks for me toward the pilots initially.

  It comes to seventh year of my printer and second course of youth. Now maybe he'll go another seven.

• With the help of HP Officejet J3680 all-in-One with Windows 7

  I knew how to use my printer very well with my other computer has Windows XP, but when it crashed and I bought a new computer with Windows 7, I can't find the things that I used to use as a tool box, indicator of level and troubleshooting options of ink.  Is there a way I can always find these information in Windows 7?  I find it too confusing to set my printer to do what I want it to do.  I can't make it work one way, but using a different option, I was able to understand

  See if this page will help:

  http://support.HP.com/us-en/document/c02463264

• How to find capabilities of scanning with C5180 all in one with Windows Vista? CC = en

  I can print with C5180.  I can't scan.  When I go to programs on my Windows Vista computer, I can see is no longer my unit indicated.  I tried to reinstall the disc that came with the device.  Install doesn't work.

  Hello RDB49 and kethyinmo

  Try the following procedure. It will remove the HP software and software that can cause problems. Please let me know if any of you have problems.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  10. run the download to reinstall the printer