TX Network HotSync tab?

How can I delete the old computer name in the drop-down list on the tab network HotSync window?

Had to do a hard reset. That fixed the problems I had. Thank you.

Tags: HP Tablets

Similar Questions

  • Network settings tab is empty

    Hello

    I have connected a Compact Rio 9068 directly to my computer (HP EliteBook 840 G1, Windows 7), and the system appears in the tree view under remote systems in MAX. However, the problem is that I don't see information under the system settings tab, while the network settings tab is completely empty (blank white page). I tried to refresh and re - start, log in as admin, but it does not help. I guess I have to change some settings of network on my computer but I do not know that and still think it's strange that nothing appears on this tab. Windows firewall is configured to accept NI MAX for Home/office and open networks. Can anyone help? Below you see how it looks like to the MAX for the two tabs.

    Kind regards

    Gloria


  • Problem with the IP vs network Hotsync computer name

    Hello-

    I have a TX, a Windows XP workstation and a wireless router.  I play successfully hotsyncs network via WiFi.  A snag, however:

    My workstation is configured with a static IP address.  In the TX Hotsync page, I can use the drop-down list for 'Select PC' and manually enter the IP address.  HotSync will work.  However, on the next go-around, I see that the IP in the drop-down list box HotSync has been replaced with the name of the computer to my workstation.  If I try to hotsync with it, I can not connect.  So I once again 'Select PC' and manually enter the IP address... and it works.  The problem is: I have to manually enter the IP address whenever I want to hotsync.

    Is there something I need to change so that the TX will find my workstation by using the name of the computer instead of the IP address, so I can just click on the button and go?

    Thank you!

    Well Yes, strange...

    Thank you.  Everything you mentioned had been done and already checked.  As I have noted, I have HotSync successfully through the IP address.

    Anyway, the next thing I did was to set the TX for static IP address.  That did not help.

    I read that the computer names are handled via NetBIOS and NetBIOS is often blocked by the default firewall.  I went to F-Secure and added about five rules to allow TCP traffic and WINS over TCP and UDP, specifically for static IP of the TX.  Voila... I have hotsync using the name of the computer.

    Now, it happens by a stranger...

    I started to remove the rules one by one, to see which actually caused to work properly.  Funny, it is... I removed - all - of the rules - and it still works.  Even after rebooting several times throughout the process.

    Then maybe some settings in F-Secure is a not 'paste' originally, and after going through the process and all still rested back upward.

    I don't know, but I'm happy now.  ^_^

    See you soon!

    Message relates to: Palm TX

  • Failed network profile tab

    Hi Experts

    I installed vcac, but can not find the network profile configuration,

    anyone encountered this before?

    Best regards

    Bai

    Can you check use Static IP is enabled for your site?

    http://www.VMware.com/PDF/Vcac-51-operating-Guide.PDF

    To manage network profiles, select

    Director of business > profiles network in the activity pane.

    To make this option available, a vCAC administrator must have enabled static IP using for your site.

  • How to make default screen of the network settings tab

    Hello

    My son played with the proxy on my PC settings.
    They don't seem to be correct. How can I reset the or enter the correct proxy information?
    Or was it a proxy in the first place?
    I'm completely lost, any help gratefully received.
    Thank you

    Hello, if your settings don't 'stick' after a restart of firefox, then probably an addon interferes or a user.js file overwriting your customized preferences: How to fix preferences that will not save

  • Articles in 'Tools' > Options/advanced/network/settings tab are grayed out. I'm trying to clear cache. may also have Firefox do this automatically, but cannot get there. Why the menu options are grayed out?

    Firefox 3.6.17

    (1) you may need to click the background box ("use of manual settings") to activate the manual configuration of the proxy.

    (2) see How to clear Firefox cache.

  • I can't find tab share in the network connection properties

    Hello

    I'm trying to share the internet connection by LAN from the main computer cable. But unfortunately I could not find the option of sharing network sharing Center. Kindly help me with your suggestions on this.

    Hello Monica,.

    I would like to know some information about the problem so that we can help you better.

    1. What is the brand and model of your computer?
    2. is the computer connected to a network domain?

    Thank you for details on the issue.

    I also know that the inconvenience that you are experiencing due to problem of network share. I will definitely help you.

    This problem can occur because of incorrect network settings.

    Please refer to the suggestions of Stephanie Podder replied on 10 July 2013 and check if that helps.
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/sharing-tab-for-local-area-connection-missing/44b26daa-44a2-42d5-9b63-42f462b6e3fd

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Tungsten E don't hotsync on Windows 7

    I run my Palm Tungsten E (bought in 2005) using the HotSync Manager 4 without problem.

    I just got a new HP laptop and tried to install the HotSync Manager, the drive did not have software to do the installation.

    I downloaded HotSync Manager 7.0.2 to try to resolve the problem. The result is the same - HotSync does not work and NO error no message to tell me what may be the problem!

    Did anyone had success turning a successful HotSync the Tungsten E Windows.

    I also have an old Tungsten E and now a new laptop with Windows 7 64 bit. I finally understood how to synchronize so here's my story.
    Already said that it works by infrared, so I bought an infrared adapter USB 7780 MOSCHIP (www.conrad.nl) and downloaded driver win7-64 www.moschip.com and installed the infrared adapter.
    I downloaded Palmdesktop 6.22 including hotsync 7.02. I also had to download and install additional conduct for Outlook2007 which I am running.
    Next: setting up hotsync to my Tungsten E account. First make a user account. It's a little tricky because this isn't the username under network parameter, but the name that appears in the upper right of the screen if you synchronize. I also had to cancel my password I got into serious trouble syncing asked a password, although I never had a password configuration in my Tungesten E. go to prefs - security - and cancel your password.
    Then in the hotsync Manager filling out what Sync (contacts, calendar, Outlook etc.). And then connection sto Infarred and network!
    Then set up the connection, placing my infrared USB adaptor near the mt Tungesten E IR. Then go to prefs, connection and I thought choose IR for PC/handheld, but the later which proved to be wrong, so I created my own custom "IR Paul" connection and the connection to the PC and via an infrared connection.
    Next to the prefs - network - service Untitled, username in my case "psalverd", "password" and connection to the IR Paul. Fact
    The Star then tab on the PDA but cancel immediatelt as Tungesten E then well that you put in place to connect with IR tries to connect to usnig a home/cable station. Yo see the Hotsync on your PDA saying menu "hotsync last date-time" with Paul IR. Its the Hotsync icon in the middle of the screen and hotsync tab will now run. On your PC, a window opens showing the progression of your timing, will soon launch a password (no) and then starts the synchronization really.

    Hope my story will help someone else. As I'm not a very literate PC users that perhaps not all correct, but it worked for me.

  • Palm TX connects to the computer via WiFi for Hotsync

    I tried the network Hotsync on all my computers, XP, Vista 32 and Vista 64 (which started the whole attempt) and the device fails to connect to the computer, even if I set the IP address.

    My wireless network see the Palm and I am able to access the Internet through it, but it does not connect to my computer. Any suggestions?

    Here is my Wifi Hotsync help file:

    WiFi HotSync with a TX

    1. on your PC, locate the Manager HotSync (small HotSync icon in the lower tray of the right tool on a Winbox). Click top and check 'Network', then click again and select Setup.

    2. choose the network at the top tab in the window that opens and locate your HotSync name in the list. Make sure it is checked.

    3. press the button of TCP/IP and look for the IP listed for "main PC address. Write it down.

    4. turn on the Wifi on your Palm and you connect to your router.

    5. on your Palm, select the HotSync program and press the word "Network" over the HotSync icon in the middle of the screen. Below, enter the IP address that you noted in step 3. (Include periods!).

    6. tap the HotSync icon big above the IP address and hang in there!

    7. If you stand and nothing happens try a HotSync cable, then retry the HotSync Wifi. Sometimes, information is to be transferred from your PC once you check the network option. Also, don't forget to watch for any activity of firewall ask you questions about "HotSync.exe tries to access your hard drive" etc. You may need to define a rule to allow him to.

    On your TX, check these settings in the drop in Hotsync:

    Modem Sync: network

    LanSync: LANSync

    Network configuration: (Wifi should be listed as one of the networks)

    WyreNut

    Message edited by WyreNut on 02/11/2008 10:59

  • Unable to get a wireless network to connect to iBook G3

    I'm having a lot of trouble trying to join the network of comments on my iBook Clamshell G3. It uses Mac OS X 10.4.11/Mac OS 9.2.2 and the tech told me that the creation of a network of comments without password encryption. Whenever I tried to connect to it it try for about half a minute, then gives me an error message:

    "There was an error joining the airport network...". »

    What this laptop needs to connect? What I am doing wrong?

    Hi, try this to start, disable IPv6

    :

    "" "System preferences" network "airport" tab TCP/IP "configure IPv6

  • network contoller for windows 8

    I can't use my wifi in my Hp WINDOWS 8 due to some driver issues!

    That's what I see in Device Manager-

    Network:

    Device Bluetooth (personal area network)

    Device (RFCOMM Protocol TDI)

    Microsoft Kernel Debug network adapter

    Realtek PCIe FE Family Controller

    Other devices: (with an exclamation point)

    Network controller

    PROPERTIES, DETAILS OF THE NETWORK CONTROLLER TAB-

    DEVICE PATH INSTANCE-

    PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01\4 & 1DBF87DB & 0 & 00E2

    HARDWARE ID-

    PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
    PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
    PCI\VEN_168C & DEV_0036 & CC_028000
    PCI\VEN_168C & DEV_0036 & CC_0280

    COMAPTIBLE ID-

    PCI\VEN_168C & DEV_0036 & REV_01
    PCI\VEN_168C & DEV_0036
    PCI\VEN_168C & CC_028000
    PCI\VEN_168C & CC_0280
    PCI\VEN_168C
    PCI\CC_028000
    PCI\CC_0280

    Hello

    Please try

    1. for the wireless:

    http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63802.exe

    or

    http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64676.exe

    2. for Bluetooth:

    http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64678.exe

    Kind regards.

  • OK, another window 7 HotSync approach for legacy T3

    I read a lot of threads on this forum, but simply could not find a solution that corresponds to my case. I tried an apparently plausible approach, but don't have enough to work. I wonder if the gurus out there can give me a pointer or two.

    I have a T3, I can only use up to Desktop 4.1.4 not something higher. If some of the workarounds would not work for me.

    My new laptop is a Windows 7 Home Premium, but it of a good deal and does not have bluetooth or infrared port to speak of. Once again, an another roadblock for me.

    While I was thinking, how about a network HotSync via my old Windows XP which has the network connection to my new Windows 7 laptop?  In other words, T3-> USB-> Window XP PC-> for Windows 7 laptop.   I HotSync would be on network in the past before, so I think I knew what I had to do.

    BUT the ONLY problem I have is, how to create a USER in the first place on the Notepad of Windows 7 for hotSync launched across the network knows how to 'home' to the main computer?    In the past, I had to hotSync on the main computer to create the user before I can hotSync over network.

    Any idea?

    Ramon, thanks to again raise this matter.

    Reb1, thanks for letting me know the availability of the 64-bit driver!

    Here is the link for the 3rd new 64-bit driver that works for my T3 on Windows 7 on USB:

    http://forums.Palm.com/T5/Windows-HotSync/64-bit-Palm-Desktop-drivers-are-here/m-p/337516#M58035

    1. I installed the Palm Desktop 4.1.4 on my Windows 7.

    2 when you are prompted to HotSync at the end of the installation, I plugged in with the PDA cradle and press the HotSync button.

    3. I heard the beep signifying the USB device has attempted to commit, but nothing showed on the screen.

    4. I then followed the outlines the steps in the link above, and everything worked as described!

    OK, for completeness, here are the steps I took to step 4 above:

    4.1 I downloaded and extracted the driver 64 bit Aceeca site through the link provided in the thread above.

    4.2 I opened Device Driver and found "Palm device" with a yellow warning icon.

    4.3 I right click on it and select "Update driver".

    4.4 I navigate to the folder where I extracted the drivers

    4.5 after the driver has been installed successfully, I HotSync would once again and voila!

  • Nettverk Nettverk Internett Webomrade Webomrade URL - address Web industry program network

    Kjøpt ny asus stasjonaer, alt funker, men kan ikke komme meg inn pa facebook bra... Any som kan hjelpe?

    STIL said sporgsmal him: -.

    http://answers.Microsoft.com/da-DK/Windows/Forum/Networking?tab=unanswered

  • Could not locate the particular thread in networking forums.

    You should look HERE:

    (Note that "all" tab should be selected instead of the tab 'Answered' by default).
    You can also click on your name to access this page:

  • Cannot change network over the VPN connection components

    Hi all

    I set up a VPN in windows XP Service Pack 3 with all latest updates.  When I display the properties of the VPN connection, there is a tab labeled "Networking".  When I click on the tab networking that I get an error message pop up that says: "Unable to allow the editing of networkingcomponents at the moment because they are being modified elsewhere."  I restarted and also tried to search and stop the services dealing with virtual private networks, etc. nothing works.

    Can someone help me troubleshoot or identify what prevents me to change my network layout tab?  There is virtually no information on the internet addressing it.

    Thanks in advance!

    Hi Amish_Robot,

    The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

    Hope the helps of information.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for