Unable to get a wireless network to connect to iBook G3

Similar Questions

• Hi, I have a d630 Latitiude. I recently bought this and have loaded XP pro. I am unable to get my wireless

  My service tag is (6W9FR1S). I am unable to get my wireless to work (although bluetooth works) the wireless light on the lower right part of the screen don't light up either.

  I downloaded all the drivers of your download page. Cable connection is working, but I can't get the machine to see the wireless card

  In my device manager, everything seems to be ok except: -.
  I have a yellow icon (?) with a "!" to the following: -.

  Biometric co-processor
  Network controller
  Video controller
  Video controller (VGA Compatible)

  The Dell quick set does not give me the opportunity to set up a wireless network

  Help!

  You must install capabilities of wireless network from a windows xp installation cdrom

• HP Photosmart 7520 unable to find the wireless network

  Printer: HP Photosmart 7520 e - ALL - IN - ONE SERIES

  Router: NETGEAR router WNDR4000

  Hi all

  After receiving our new HP all in one printer, we have found our network wireless networks list wireless during the printer set up. We are able to receive the networks of our neighbors, but not our network.

  We tried:

  • Using the WPS function on the router and the printer
  • Establishment of an open on our router wireless network
  • Connect to our wireless router using the setting on our laptop when the option during the installation of a PC.

  Any help on this subjest would be appreciated.

  Best regards, Nick van der Lee

  Hello

  I found the problem that was the printer not to see the SSID of the router.

  The wireless channel was on channel 12 for the frequency of 2.4 GHz. While I was looking around I found this Support Page for Nintedo. Point 6 is a mention about these channels with respect to the same problems I was experiencing with the printer.

  By changing our channel to channel number 3 number, we could see the wireless network.

  It's a bit weird because I thought that the printer has a full specification b/g/n but apparently not?

  In any case thank you for your support.

• Re: Unable to get the wireless adapter to work on my Satellite L550-1CC

  I'm getting bored with this laptop, I reinstalled windows 7 (32 bit) and can not get the wireless adapter to work.

  My router settings are perfect, my netbook is zero connection problems - the router is just inches away from the laptop most of the time - the laptop insists that there is "no available networks."

  This of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.

  Windows automatically installed the wireless network - I thought that could be the problem, so I downloaded the realtek driver directly.

  No difference. Always the small icon with Red Cross barred through it.

  I thought it could have been a hot key problem - so I installed the flash card driver that apparently controls the access keys (for some reason any).

  Shortcut keys still don't work - I could really care about that - it's just the wireless network I need.

  Thanks for any help I receive.

  > my netbook has zero connection problems - the router is just inches away from the laptop most of the time - yet the laptop insists there is "no available networks."
  After reading this sentence, I'm a bit confused. If there is no available WLAN networks how your laptop had zero problems to connect?

  One last thing:
  > Of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.
  What is the difference between the old and the new installation of Windows?

  In general the WLAN use is fairly simple.
  Wireless network card - must be installed correctly (listed in Device Manager
  WLAN card - must be enabled using FN + F8 key combination to activate the wireless network card
  -scan the available WLAN networks area, click on the button of your WLAN and use connect
  -put key WLAN if necessary and after a few seconds WLAN connection will work

  I did this many times on laptops preinstalled Win7 and didn't have any problems. On all laptop computers pre-installed with Toshiba recovery image (factory settings) is not necessary to change the WLAN settings.

• Inspiron unable to find the wireless network, wifi catcher is on

  I have a Dell Inspiron 1500, recently was unable to connect to the wireless network. Cannot find same wireless networks when I search. A WiFi catcher is enabled.

  Hello

  I suggest you to follow the steps in this link and check if it fhelps:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Also check out this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  It will be useful.

• Just moved and my laptop is now unable to see my wireless network.

  original title: can't set up wireless connection

  I just moved into a new apartment. Very well I can connect to the internet via ethernet. I'm having difficulties to establish a wireless connection. When I disconnect the ethernet and WiFi lights, my network is not. I don't know much about computers, so maybe it's a simple solution. I tried to make a new wireless profile, but once I do that, the wireless profile, I've tried to create does not appear on the list of available networks. Please let me know what I can do to solve this problem. Thank you very much.

  Hello

  While you're on the connection of the cable to connect to the wireless router and check the wireless settings (see Manual of the router).

  If everything checks OK examine your computer wireless system.
  ------------------

  Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

  Then pass these steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

  If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

• do not print to the printer wireless network computers connected to wifi

  Don't know if I'm in the right Forum but here goes.  I work in a dealership service department. I have 4 computers connected to our network. I just bought a pro m426fdw mfp laserjet 4 in 1 ad printer connected to our wifi system because there is no available ethernet jack to connect to the main network. Is there a way to allow my 4 computers send information about this printer wireless?

  If you connected to your wireless network, and then run a report of network printer and find the ip address of the wireless connection. If you're in the list use to load the printer using add it printer, the local printer, create a port and the menu drop-down, choose standard tcp/ip and then follow the instructions on the screen. You can also try to load the disc that came with the printer and see if it will find the printer and load it for you.

• Re: Satellite A40 - can I get a wireless network card?

  Anyone know if I can get a wireless card for the A40 Satellite?

  Thank you

  Hi calibra,

  Before you buy a wireless network card, you should check if your laptop is already equipped with WLAN antennas. The antennas are installed as part of the screen and are necessary for the wireless network adapter. If you n t have it your WLAN card will find not all networks.

  By the why: you can get a compatible WLAN card to an authorized service provider. Do you know how to contact the guys?

• Wireless network cannot connect after sleep (X 200 tablet, win7)

  Hi all

  I've seen similar problems like this asked several times, but they have rarely been resolved and not by any means that I have not already tried, therefore this is.

  Immediately after starting, my wireless card works fine.  After that I put my computer to sleep then wake up, however, the wireless network adapter seems to fail.  It still detects networks, but when I try to log in, it takes a long time to connect, then says he can't.  If I wait a bit and try again, the same thing happens.

  This can be solved temporarily by one of these three methods:

  1 restart the computer.

  2 troubleshooting wireless network card (it resets the adapter each time and then it works).

  3. go to network and sharing Center-> adapter settings-> turn off, then turn on the wireless card.

  This problem is reproducible on EVERY sleep and on ANY wireless network (i.e. it is not a router problem).

  Solutions proposed that I already tried:

  1 reinstall/restore/update driver software.

  2. change the settings for the network adapter power management to not allow the computer to turn off the device to save energy.

  3. change the power management not to go in network adapter power saving mode.

  Entails disadvantages because I often need to turn my computer on sleep and access to the internet, and disabling + to reactivate the wireless network card takes time.  If someone managed to overcome a similar problem?

  Thank you.

  Hey ez910503,

  You can try to uninstall the software of dial-up connection and wireless drivers.

  Let windows install its generic wifi drivers and try again.

  curious to know what is the current version of the driver that you are using for your wifi card?

• wireless network always connects to the profile virtual again once it has been removed from manage networks wireless on vista Home premium

  remove the wireless network problem

  Hi bokononist,.

  I suggest you go to your network card making and download / install the latest drivers.  I suggest that you check your system for corrupted files.  You use the tool (SFC.exe) System File Checker to check and repair corrupt system files.  To do this, follow these steps:

  • 1. Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Operating system is unable to find the wireless network adapter

  I have recently reinstalled Windows 7 on my HP Pavilion Elite on a new hard drive.

  Since the installation, Windows is not able to recognize the NIC wireless on my machine. I imagine that there are drivers somewhere on the recovery discs that I bought out of HP, but those who stick me in a boot loop and aren't really good for nothing.

  I opened the computer case and didn't see any wireless network adapter card (two cards are the video card and the expansion USB3 card), so I guess that means it is integrated. Who is?

  in any case, long story short, I want that my PC for wireless internet, as it did before my other hard drive has failed, but the recovery discs that I bought last week off the coast of HP do not work so I do not know what to do next. Is this a driver problem?

  For what it's worth, I downloaded a bunch of the "drivers" section wireless network adapters and went through them until I found one that worked.

  Problem solved.

• Satellite L300 - unable to get a wireless Internet connection

  EY you have some questions,

  Funny, is that I have my laptop 4 on lets say half a year. I had problems with my wireless connection, I tried 2 fix it, but really never been stable.

  But now I had a problem I've ever had before, can't get no Internet connection what so ever with my wireless connection, only time when I get a connection is
  When I put in the cable.

  Checked a lot of posts but nothing really worked, tried the FN + F8 verified and updated http://aps2.toshiba-tro.de/wlan/.
  Tried to update my Realtek RTL8187B wireless 802. 11b / g 54Mbps USB 2.0 network adapter, but he can't find anything on the net.

  Let me know what you guys think I should do.

  was soon Dupp

  Hello

  Well, you said that the Internet connection is working that with the cable so you have checked the settings wireless LAN on the router? WLAN is enabled on the router?
  In addition, you should try to update the firmware on your router.

  Also, make sure that you use the same WLAN settings than on your router. I mean the channel and speed (e.g. 802.11 g).

  You should also try to disable encryption on the router. Can you connect to the router then?

  Finally and most importantly, you use factory settings or you have installed another OS?

• Can not get the new laptop to connect to my wireless network but connects to others

  I have just bought a new laptop Dell Inspiron 1545 to Dell.com and have tried to set up the wireless internet for the past hours. The laptop running Windows Vista Home Basic Edition, & my wireless router is an Apple Airport Extreme Base Station (about 4-5 years). Below is a list of problems / advice I've come across so far:

  (1) when trying to connect to a network, my network don't appears in the list of local networks sporadically even if she lost the signal strength of any nearby wireless signal (I must refresh the list to make it appear sometimes)
  (2) when my network is displayed in the list, it is described as a network that is not secure; There are 2 others that come and go in the list that are also not guaranteed, but I was able to connect through one of them.
  (3) when I try to connect via my network it either says unable to connect immediately or poster progress bar, then after a minute or two, says that it cannot connect.
  -to diagnose the problem, I can exclude is not not in the range of my camera as I tried to connect when I'm 2 feet more far
  -It also says view wireless connections again and try again, but this brings me to the same screen
  -L' diagnostics screen mentions that "the network is"hidden"and is either not in range of this computer or wireless settings on this computer do not match the settings of the network." (is there a setting I'm familiar with that?)
  (4) I checked device drivers and all said that they are working correctly
  (5) I can connect to the internet via a direct connection to the router via a cable ethernet not wireless

  In my view, that it is all the information I can provide about this problem. If you need more information, such as the specifications of the system, let me know where to find them and I will re-post. Thanks in advance for any help provided.

  -Jeremy

  Well, it looks like the old router was the problem. You have a new N Wireless for about $80 as suggested and it works like a charm. At took 5 seconds for your laptop to recognize and connect to it and were without problems since then. Thanks again for the help guys... I hope that I won't bother you again =)

  -Jeremy

• Suddenly can't connect to the wireless network: limited connectivity or none, I tried to bugs, no help!

  I have a laptop with Windows Vista. Recently, I upgraded my home wireless internet connection, which meant the laptop could go online (previously I had just used online office). It worked very well without any problems, until I enabled him to download updates windows (don't know if it was a service pack or only some updated files). Now, I am no longer able to connect, I don't always get limited connectivity or none even if the wireless signal is "excellent". I tried 2 ' difficulty his "from microsoft, including TCP/IP, no effect. I tried to turn off my IPv6 setting, no effect.

  I am considering currently switch to XP Pro, even though I grew to like the 'look' of Vista, so it would be a shame. But I have to be able to get the laptop online!

  Any help gratefully received... I'm not very tech-savvy so I need the stupid version :)

  Thank you

  Hello

  Try to clean the Wireless Manager so there is not more entries and try connection toyaspin

  http://www.ezlan.NET/Vista/wireless_manager.jpg

  If you have to connect to the wireless router, make a thread connetion disable wireless security on and try to connect again.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• can not get the wireless network... saying "windows could not find a certificate to log in to a network.

  Hello

  I tried to connect wireless to my network with a netgear mordem.and saying "windows could not find a certificate to log in to a network" I was using a mordem delink and never had prob.when I call my internet provider as they gave me this new mordem free, is to show that msg.but when I connect by netgear cable is efficient. my windows operating system is windows xp

  Thank you

  Hello

  I tried to connect wireless to my network with a netgear mordem.and saying "windows could not find a certificate to log in to a network" I was using a mordem delink and never had prob.when I call my internet provider as they gave me this new mordem free, is to show that msg.but when I connect by netgear cable is efficient. my windows operating system is windows xp

  Thank you

  Thanks for posting. Follow the instructions below carefully.

  1. Click Start > run > type or paste devmgmt.msc > click Ok or press ENTER.
  2. Scroll down to network adapters. Develop the content by clicking on the symbol +.
  3. Locate your wireless adapter. Right-click on it and choose uninstall. Confirm the prompt.
  4. Restart your computer. Allow Windows to detect the new hardware. The driver and the device needs to be reinstalled automatically the resolution of the problem.