TX/RX of the frame attribute CAN read?

Similar Questions

• I want to get multiple clips horizontally through the frame, how can I control the speed at which the move?

  I want to get multiple clips horizontally through the frame, how can I control the speed at which the move?

  And the second

• Using the same interface CAN read and write

  Hello.

  Can I use the same CAN interface to read and write?

  For example:

  I send you CAN frame using CAN1 to my MCU.

  IF MCU confirmed the order of receiver it immediately sends the echo return command and there different ID to send the command.

  I tried to use CAN1 output framework and then reconfigures CAN1 to frame in queue and retrieve the frame of the echo.

  But it seems that I was always missing. The 'framework of CAN' kept vi expire.

  When I used the separator on the outlet BOX in my configured MCU CAN1 for frame and CAN2 for chassis in and I managed to catch the echo framework.

  I think about 100 ms for the frame in response that will be sent after the order has been received. It takes longer for the NI PXI-8513 reconfigure? Can I still do it, or I have to use the separator?

  I wad jump to use an interface to read and write.

  Thank you

  Ok. I misread your notion of echo. I understand now. I'm sorry.  The code you posted seems reasonable.

  (1) did you notice on or off for the session?

  (2) what baud rate? You can add a parameter of baud rates for the property to be explicit node.

  (3) I don't remember the name of VI, but you can add a status of Comm Get after reading. This will give you some information about the bus - if errors were detected, etc. Which can be useful to help debug.

• DVD Player cannot read the DVDs (but can read busy DVD)

  Hello

  I have Hp Pavilion dv6-6140us, a 64-bit engine and is running windows 7... I wanted to burn the iso of windows 8, but my dvd player is not able to read blank dvd, but it can read the non-empty disc and can also play movies... Please help... want to try to win 8 preview release

  Hello

  Follow these steps to reinstall the Beats Audio interface.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52658.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are done, reboot the laptop and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• When I copy files to a CD in Roxio I get a statemet that my version of the file DLA can read but not modify or add. How to add extra files on the CD?

  I have Windows XP and the Service Package 3.  I try to use Western Digital MY BOOK Essential external drive and also the Roxio software.

  The following freeware can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  CDBurnerXP
  http://CDBurnerXP.se/
  (Win XP, Vista, 7)

  CDBurnerXP to make Audio disc
  http://CDBurnerXP.se/help/audio/compileaudio

  CDBurnerXP create data disc
  http://CDBurnerXP.se/help/data/compiledata
  (the green bar at the bottom of the screen
  turns red if you add too many files)

• Ok. so, when I sync my music to the ipod, it can read my computer to play, but it is not recognized as the device when I unplug it from the computer.

  my ipod plays only a few original downloads on my sound surround of boise, but the most recent downloads will only record and play on my computer. When I download music it synchronizes and can be found and played back on the computer but is not found on the actual screen of the ipod to play my biose surround sound, but there is space on the ipod.

  If you wait for the new songs (in your iTunes library) to automatically synchronize to the iPod, it must be configured to use automatic synchronization (setting synchronization music ).  Select iPod in iTunes by clicking on its button on the device.  For current iTunes, the screenshot below shows top left corner my iTunes, iPod touch window circled in red.

  

  Click this button to display the settings of the iPod summary screen in the iTunes window.  Along the left side of the window, in the sidebar, under settings, click on music.  To the right, the music from the iPod settings screen.  Check mark for Sync music box (if it isn't already)

  NOTE: No matter what songs on iPod that are not in your iTunes library (on computer) will be lost.

  This enables automatic synchronization.  You can choose to synchronize the entire music library (if it fits on the iPod) or a part of the selection .  Implement this screen as you want, and then click apply.  Further, iTunes automatically keeps iPod "in phase" with the changes to your music library (or the selected part of it) when you connect the iPod (or click sync , if already connected).

  If this isn't your problem, please post back with additional details.

• I bought a pack of Windows 7 OEM System Builder. But now I've lost my product key of the box, how can I recover it?

  I bought a pack of Windows 7 OEM System Builder. But now I've lost my product key of the box, how can I recover it?

  You can not

  The key was on a COA sticker must be on a sticker that you * should * have stamped on the case of the machine.

  If the OS is installed (properly with the key), you can read it using a tool such as Belarc Advisor - www.belarc.com

• pageItems.ItemByName () removes the frame

  I'm working on the script that does the following:

  1 reads xml and gets two bits of data: NomComposant and componentText

  2 iterates through the current InDesign looking for blocks of text document whose 'name' is equal to 'componentName.

  3. If the script detects a frame on a page which corresponds to the "NomComposant" and add the block of text to text

  4. If the script is not a qualification framework it will add the frame to the first page of the document.

  In one of my functions, I have the following:

  ---

  pageItemByName = docReference.pages.item (q).pageItems.itemByName (theComponentName);

  ---

  'q' is the page being the document and "theComponentName" is the name of the image I'm looking for.

  ---

  Problem

  ---

  The above command ends up deleting the first image that is created.

  For example if I have four components: head, body, subtitle, legend of the script will perform the following operations:

  1. read the first component, through the three-page document that does _not_ contain blocks of text

  2. not to find frames with the 'name' of the 'head' on pages

  3. create the image on the first page with the 'name' of the 'head' and place the text in the frame

  4. read the second component, look at the first page with the command above, delete the word 'head', creating a new framework called "subtitle" and put the correct text in the frame

  5. the script will end its work and will have created four frameworks, deleted the first and the other three on the first page to the left.

  This also happens if I create the framework four before running the script and the four frameworks are _not_ on the same page.

  If the frames are on the same page everything works as expected.

  I thought at first, I was just a reference or a variable in the code, but at this point, I'm a little puzzled

  Any thoughts appreciated.

  -Jeff

  
  

  Here's what I did to solve this problem:

  This, as noted above, the original call was:

  ---

  pageItemByName = docReference.pages.item (q).pageItems.itemByName (theComponentName);

  ---

  The idea here was that I could be lazy and just ask "NomComposant" and recover from the first mention on the page and use this reference. Clearly who did not work for me.

  I went a different route and asked for the pageItems, counted them and asked each for his name.

  Like this:

  ---

  for (var m = 0; m< pageitemslistcount;="">

  var pageItemsReference = pageItemsList [m];

  var pageItemsReferenceName = pageItemsReference.name;

  do stuff

  }

  ---

  With a little more testing of the image returned, this solves the problem for me. I don't know yet why the first try failed.

  -Jeff

• Cannot modify only directory attributes of reading, all the readers all the directories.

  Original title: cannot modify only directory attributes of reading, all the readers all the direcotries.

  For some reason now all directories are read-only. I have a check only reading tab, it goes through the process of change in all files in the subdirectory (I put their scrolling), click ok. But when I go in the directory again that reading is only check again. It is on my C: dirve all directories and all the other readers, including empty directories. Any suggestion would be appreciated. Thank you
  Bit defender shows no problem.
  SdS49r

  Hi SdS49r,

  I would like to ask you a few questions to better understand:

  (a) you connected to the administrator account? because you do not have the \n(Assurez-vous if you are not in the administrator account

  (b) don't you make changes on the computer?

  (c) have you created the file read-only?

  (d) what message do you get while changing the read-only attribute?

  (e) have you been able to change the attributes previously in your computer?

  You can scan your computer, then follow the steps in the link: http://www.microsoft.com/Security_Essentials/

  Try the system restore, it restores the computer to its point earlier while it was working fine.

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  
  Hope this information helped!

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• How to add the transient attribute for LOV (object of the view read-only)

  I have a view called CustomerView and attribute DepartmentId is present in it.

  Also exists DepartmentView and CustomerView.DepartmentId has an LOV from this point of view.

  I need to add a transient attribute to CustomerView which express the DepartmentName attribute in the LOV.

  Because of the view are read-only there is no entity object don't match them.

  How can I write the groovy for the transitional object expression.

  The name of the view accessor Lov's DepartmentView1

  Looking for your help. Thank you.

  Hi gcoban

  I do not understand your question correctly,

  you are not able to write to the expression property in viewObject?

  or you want to know how to write groovy for that?

  for writing groovy you need viewAccessor and you who have, you can try as Alejandro Tovar Lanz suggested

  or you can write code in RowImpl to fill in the name of the Ministry of the accessor

  See -https://blogs.oracle.com/adf/entry/combo_lov_how_to_display

  Thank you

• The blue background color is not displayed with my client, so, how can I change the color of the frame of a field?

  Hey,.

  I have a problem, my client does not see the blue marked fields in my form. It uses version Acrobat X 1, 11.0.10. I see it with my Acrobat Pro and Acrobat Reader version. Now, I wanted to highlight the fields with a color or a color of the frame, but I can't select it. I won't mark the fields in Indesign and then put form fields in Acrobat top. But I do not know otherwise. I work on a Mac, my customer uses Windows.

  Can you please help me?

  Thank you very much

  Anna

  They can activate it by going to Edition - Preferences - forms and clicking the box "Show hover border for the fields.

• How to read the value attribute and put inside?

  What happens if we want to read the attribute value? And want to put the data of runtime on the value of the attribute as
  
  < psoID ID = "user id" / >
  
  How to get the value of the ID as the user id. And how to put the run value on it?
  
  I can think about is that
  
  /psoID/@ID/value GOLD psoID/@ID/*[local-name () = 'value']
  
  And how to put the value inside ID ="? »
  
  Thank you

  Because we are dealing with a structure of type anyType you must use the functions of node (local name) in combination with predicates ([]) to read or write values (node) of the element:

  To read the value for example use the copy rule:

  
  
  
  

  This wil read:

  /processResponse/result/psoID/@ID

  on the message:

  
  
  
  
  

  You will see the value 'B '.

  To write, you use:

  
  
  
  

  Kind regards

  Melvin

• during the RAM Preview and reading frame counters

  I understand that I should be able to display the number
  of the Treaty currently framework during a RAM Preview
  in both the meter of timeline (in frame display mode) and in the info panel.
  This does not work for me, and I'd like to see if I'm missing something.

  This is the State of the counters with a current RAM Preview.
  The only images update count is at the bottom of the composition window,
  and it could not be visible during the processing of a RAM full screen preview.

  RAM PREVIEW CURRENT

  

  This is the status of the counters during the RAM Preview playback.
  Playback CTI is roughly 90 of 912 frame, but the counters at the same time the
  Chronology and the compose window are frozen at zero, while the Info Panel
  is frozen in the last number of the frame in the scenario (the last rendered image).

  
  

  READING OF THE CURRENT RAM

  

  During the reading of the space bar, only the counter the composition window displays
  the current frame.  The meter of the timeline is frozen in the frame number where
  the CTI was stationed during playback started (in this case, frame 0).
  The info panel displays only the playback framerate.

  READING OF THE STANDARD PREVIEW

  

  If I stop playing RAM Preview or standard using the space bar
  the meter of timeline updates to the frame of the CTI, but if playback resumes
  the frozen counter stays where ICT was parked at the resumption of play.
  I feel this behavior using frames, timecode, ft + frames and using
  "To present" the RAM previews.

  Please tell me I'm doing something wrong.

  > I can't seem to get a current account in the timeline will appear a rendering or reading circumstance

  This does not happen.

• How can I change the impression of Firefox settingson a mac? Specifically, the "Frames" option

  When I try to print the selection page in Firefox on my Mac, it prints the selection where it appears on the page.
  In the print menu, there is a section of frames that is shaded by the selection of "as defined on the screen. How can I change this setting?

  On:

  #1: When I try to print the selection page in Firefox on my Mac, it prints the selection where it appears on the page.

  Yes, this can be inconvenient in some cases. One solution is to remove the other content on the page and then print the selected content normally (instead of using selection). To remove the content, you can use this extension:

  https://addons.Mozilla.org/firefox/addon/Nuke-anything-enhanced/

  As shown in the screenshots on the page, right-click on the selection and choose delete everything else.

  #2: In the menu printing, there is a section of frames that is shaded by the selection of "as defined on the screen. How can I change this setting?

  If frames section is dimmed, which indicates that Firefox did not detect frames on the page. Most sites use no frames, although many use iframes (inline frames). If you need to simply print the contents of an iframe, try right-clicking on the framed area and use

  This Frame > Print Frame...
  

• can read but not write in the Numbers worksheet

  Can read but not write in the worksheet Numbers on my MacBook.

  Hi Frederic,.

  This also happens if you are still in the screenshot. Is there a "Done" down button on the right?

  Quinn