Type activity data export failed "FormSubmit"
Hi all
I try to export activity outside by the API data in bulk.
But when you use the activity type "FormSubmit", I get "error" status of the synchronization with message as follows:
[{'count': 0, 'converted': "\/","message":"There \/Date (1426236500847) was a converted l'export.","severity":"error","statusCode":"ELQ-00107","syncUri":"/syncs/64770"},{"syncUri":"/syncs/64770","count":0,"severity":"information","statusCode":"ELQ-00101","message":"Sync to sync 64770 processing error, resulting in a status.","createdAt":"\/Date (1426236500847) error" \ / ""}]
Other types of activities work well.
Any suggestions?
Thank you
Biao
I have problems with FormSubmit as well. For some reason, there is a massive amount of duplicates in FormSubmit, causing the number to go above 5 million documents. I don't have these problems with any other activity, just FormSubmits.
Tags: Marketers
Similar Questions
-
In bulk API REST v2 activity Data Export 'primary key '?
After reading the documentation, I expected that ActivityId would be the primary key when you export activity data - for example, it would not be in double ActivityID in the data returned by the export items . However, I see the exported data where I have several references to activity that are identical, except that they have different CampgainIds
- Is ActivityId, CampaignId the primary key for the activity data? If not, what is?
- When the activity with the same activity ID data has different areas (excluding CampaignId)?
Thank you!
It is a known issue that we're working to correct.
-
Hello everyone!
I used JAXWS to create WSDL from a file of Jehovah's witnesses.
It's my TJ:
-----------------------------------------------------------------------------------
package ws;
Import javax.jws.WebService;
Import javax.jws.WebMethod;
ws import. MyDataType;
*@WebService*
* public class MyWebService {*}
public MyWebService()
*{*
*}*
*@WebMethod*
public MyDataType MyWebMethod (MyDataType mdt)
*{*
* / / mdt.setS ("I got it!"); *
return mdt;
*}*
*}*
-----------------------------------------------------------------------------------
and this is my type of data:
-----------------------------------------------------------------------------------
package ws;
* public class MyDataType {*}
String ^ s;
public MyDataType()
*{*
*}*
* public String getS() {*}
return s;
*}*
* Sets public Sub (String s) {*}
This.s = s;
*}*
*}*
-----------------------------------------------------------------------------------
and that's my Ant build.xml
-----------------------------------------------------------------------------------
* < by default of the project = "all" > *.
* < property name = "weblogic.jar.classpath" value="D:/Projects/bea103/wlserver_10.3/server/lib"/ > * "
* < taskdef name = "jwsc" classname = "weblogic.wsee.tools.anttasks.JwscTask" > *.
* < classpath > *.
* < path id = "weblogic.classpath" > * "
* < pathelement path = "WEBLOGIC_HOME" / >. *
* < fileset dir = "${weblogic.jar.classpath}" > *.
* < include name = "weblogic.jar" / > *.
* < / fileset > *.
* < / path > *.
* < / classpath > *.
* < / taskdef > *.
* < target name = "all" depends = "clean, build-service" / > *.
* < name target 'clean' = > *.
* < delete dir = "output" / > *.
* < / target > *.
* < name target = 'build-service' > *.
* <!-add jwsc and related tasks here - > *.
* < jwsc srcdir = "" destdir = "wsoutput" > * "
* < jws file = "MyWebService.java" type = "JAXWS" / > * "
* < / jwsc > *.
* < / target > *.
* <!-< target name = "deploy" > - > <! - add wldeploy task here - > <!-< / target >-> *.
* < / project > *.
-----------------------------------------------------------------------------------
I have run the Ant task, but I get this error:
-----------------------------------------------------------------------------------
BuildFile: build.xml
clean:
build service:
[jwsc] TJ: processing module /MyWebService
[jwsc] The analysis of source files
[jwsc] The analysis of source files
[jwsc] 1 TJS files processing for the module /MyWebService
* [jwsc] [JAM] WARNING: could not resolve class MyDataType *.
[jwsc] TJ: C:\Documents and Settings\samimi\IdeaProjects\SampleWebService\src\ws\MyWebService.java valid.
[jwsc] Treatment of the web services JAX - WS 1...
* [jwsc] error: couldn't get TypeDeclaration for: MyDataType apt tour: 1 *...
...................
BUILD FAILED
C:\Documents and Settings\samimi\IdeaProjects\SampleWebService\src\ws\build.xml:
19: weblogic.wsee.tools.WsBuildException: JAX - WS web services processing error
-----------------------------------------------------------------------------------
Please help me solve this problem.
Thank you
MojirI tried to compile your source code and received the same exception.
However after compiling the MyDataType.java before running the jwsc task, I was successfully able to build the service.Please try the ant script below and let me know the result:
*
* *
**
*
<>
srcdir = "${source.dir}" "
DESTDIR = "${Build.dir} '"
keepGenerated = 'true '.
classpath = "${Class.Path} '"
Debug = 'true '.
verbose = "false" >
Thank you
Sandeep -
Hello
I'm testing the process feature of Livecycle WorkBench.
However, I am facing some difficulties...
As a test, I wanted to create a simple process that would:
- Look for an email attachment, an interactive PDF form
- Export of XML data in the form
- Send the data XML email
I managed to do step 1, but as soon as I get to step 2, I have the following problem:
I have the PDF form that is stored in a variable, type of document, by I can not use this variable to assign in as input for the component "export data"...
The data export component seems to expect an active...
If I run my process, with the process as input (in the form of URI), I get an exception of entry saying that my PDF is not in a correct format...
I thought that this test would be a simple
Could someone show me how to do this in a process? Thank you very much!
Please seek assistance from various examples of services available here: http://help.adobe.com/en_US/livecycle/9.0/samples/lc_sample_service.html
Here is the link for all samples: http://www.adobe.com/devnet/livecycle/samples.html
I hope this helps.
Thank you
Wasil
-
Hey
I had a situation in the present case, I flat file and I want to load it into sql server 2012.
In the flatfile I have 2 data types of columns date and I chose LKM FILE TO SQL, when I try to run it fails to create the work table.
When I c the code in this step it shows
create the table dev.dbo.C$ _0TES
(
ASN_BOL_NBR NUMERIC (7,0) NULL,
ASN_CARTON NUMERIC (20.0) NULL,
ASN_SHORT_SKU NUMERIC (7,0) NULL,
ASN_SKU_CHECK_DIGIT NUMERIC (1.0) NULL,
ASN_DESC VARCHAR (25) NULL,
ASN_QUANTITY NUMERIC (7,0) NULL,
ASN_LEAVE_DATE DATETIME2 (27) NULL,
ASN_ARRIVAL_DATE DATETIME2 (27) NULL,
ASN_MULT_PACK VARCHAR (1) NULL,
ASN_MULT_SKU VARCHAR (1) NULL
)
MSG 1002, level 15, State 1, line 9
Line 9: Specified scale 27 is not valid.
DATETIME2 (27) the table of creative work is a failure because of the type of data
ASN_LEAVE_DATE DATETIME2 (27)
ASN_ARRIVAL_DATE DATETIME2 (27)
Is there a way to avoid a DATETIME2 (27)?
Thank you!
Yes, I would certainly put the data on the source of the string type.
Then in your mapping/interface, you can use the CONVERT function.
For example, CONVERT (DATETIME, YOUR.) ASN_LEAVE_DATE, 101)
In this example, 101 as a style means that your file contains a date in the format dd/mm/yyyy.
See CAST and CONVERT (Transact-SQL) to find out what style you apply.
Kind regards
JeromeFr
-
Trying to export a web page standard, as I have many times before with LR 5. Now with Lightroom CC web export fails, with a list of images, each original saying file is missing. They don't miss - all other types of export work OK. The overview of the web browser works well and I use it as a round piece for the moment. Please Adobe sort this issue!
Hugh Letheren
This problem has resolved itself. The export feature now works as it should. I not did something to fix the problem - very strange - but thanks for trying to help everyone!
-
Grid d? infrastructure is needed for Active Data Guard fast failover?
Hello
I'm currently deploying an Active Data Guard of 11 GR 2 configuration with a captain and two slaves physical standby and failover accelerated for a Java JDBC application. Each instance has a read-only service that is always active and a service of reading / writing that is activated only on the master:
srvctl add service -d smsgsig1 -s smsgro -l PRIMARY,PHYSICAL_STANDBY -e NONE -m NONE srvctl add service -d smsgsig1 -s smsgrw -l PRIMARY -e SELECT -m BASIC -w 10 -z 150
Initially, I had planned to use the Service of Notification of Oracle (ONS) to notify the application in case of change of master, that works, however, after a few tests, it seems that simply leave the retry request enough times in the case of a connection failure is sufficient to re-connect to the new master afterwards, in order to complete any pending transaction.
So my question is: since I plan not to use ADD-ONS, do I have the grid infrastructure and Oracle Restart at all to deploy Active Data Guard? The documentation does not explicitly require it, and all the necessary tools, including srvctl, exist in the plain 11 GR 2 home. However the mechanism of activation/deactivation of the service will work without restart? To be honest, I don't think it would be, but that this would simplify the deployment, a little, I thought it would be good to ask :-)
Thank you for your understanding,
Chris
Hello;
The simple answer is no, I could consider changing my order srvctl.
EI SESSION (type switching must be set to both)
m BASIC (set on both)
l PHYSICAL_STANDBY (isn't one of yours in this service role?)
z - 15 (150 retrys seems too high)q (the value TRUE or FALSE)
w (set on both)
srvctl add service d smsgsig1 s smsgro-l PRIMARY - SESSION - q TRUE m BASE w 10 EZ 15
srvctl add service d smsgsig1 s smsgrw-l PHYSICAL_STANDBY - q REAL - m BASE w 10 EZ 15 SESSION
Best regards
mseberg
-
Oracle11g R2 Active Data guard using ASM problem?
I configured oracle11g r2 RAC on 2 notes with the ASM (OS, unix) grid.
ACR is running.
Now I'm setting up Active data Guard.
Under Network instance user + ASM and the listener is running.
User is running under oracle listener static.
Any drive is mounted.
Oracle RAC and Data Guard directory and structure I've kept even.
Now my problem is below:
$. / rman target sys/HPinvent123nbl@dcpdb sys/HPinvent123nbl@drpdb ASSISTANT
Recovery Manager: release 11.2.0.1.0 - Production on Wed Jan 16 16:28:32 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: DCPDB (DBID = 316773134)
connected to the auxiliary database: DRPDB (unassembled)
RMAN > database of target duplicate for the eve of the active database.
From 16 January 13 Db double
using the control file of the target instead of recovery catalog database
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID = 5644 device type = DISK
content of Script memory:
{
backup that copy reuse
TargetFile ' / u02/app/oracle/product/11.2.0/dbhome_1/dbs/orapwdcpdb1' auxiliary format
' / u02/app/oracle/product/11.2.0/dbhome_1/dbs/orapwdrpdb';
}
execution of Script memory
From backup 16 January 13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 1897 instance = dcpdb1 = DISK device type
Backup finished on 16 January 13
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of Db in dual at 16/01/2013 16:28:48
RMAN-06136: the auxiliary database ORACLE error: ORA-00200: control file could not be created
ORA-00202: control file: '+ data '.
ORA-17502: cannot create the file + data ksfdcre:4
ORA-15001: 'DATA' diskgroup do not exist or are not mounted
ORA-15055: unable to connect to the ASM instance
ORA-01031: insufficient privileges
RMAN >
Please help. \
Thank you
SolaimanIs your Oracle asmdba group user name?
What is the output of command mentioned below
ID Oracle
-
Active Data Guard and Undo and ora-01555
Hello
We have a 11.1.0.7 two nodes primary CARS with a physical standby single instance Active Data Guard. When you run an export datapump since the day before, we get an ORA-01555 while the undo_retention is well beyond the duration of watering for export.
I'm looking to better understand the cancellation as part of Active Data Guard. Is there any dependency for cancellation between the primary (s) and the day before? Are the settings Cancel (undo_retention, tablespace... undo size) on the primary and independent intelligence on the other?
Thank you.The wait is a physical expectation. An exact copy of the primary. The cancellation to sleep is controlled by it again come from the primary. When the cancellation is replaced in the primary, he gets crushed to the standby regardless of what it executes. You cannot cancel maintained around more on the eve, it is a replica of the primary.
Increasing the undo tablespace and the primary undo_retention allows more Cancel to keep both primary and standby, but Eve is always controlled by the direction of the primary to cancel it. Of course, you must change the setting to sleep too so that everything is the same when you made the day before to a primary database.
I hope this helps.
Larry
-
Hey,.
I use active data services to update an array element with the use of database change notifications. I was able to view the changes in the database, that they take place. The problem is that the data inserted will be added at the end of the table and if I want to add it at the beginning or in other places, it would be difficult to change the hash table (reduce performance) to include the new data line (I'll have to push the values in the hash table and add the new at the top so that it appears at the beginning of the table).
So the question is how can I do this more effectively?
Is it possible to use another data structure where it will be possible to add data to a post that will automatically push the other values?
Published by: mangun November 19, 2009 17:05Hello
not sure on the AP, in you use JDeveloper 11 g R1 PS1 (11.1.1.2) us proxy to frame which has a method
/**
* built theActiveDataUpdateEvent
.
*
@param type the type of the event change, could be updated, INSERT,
* REMOVE, REFRESH, etc.
the changeCount changeCount @param
@param key the key of the line (in the case of CollectionModel)
@param insertKey key to indicate the insertion position
@param genericConversion param passed to the internal call
*convertKeyPath
@param names the names of the attributes to modify
@param values the values of the attributes to be changed
* @return the ActiveDataUpdateEvent
*/
public static (buildActiveDataUpdateEvent) ActiveDataUpdateEvent
Type of ActiveDataEntry.ChangeType,
int changeCount,
The object of the [] key,
Object [] insertKey,
String [] names,
Object [] values)...
The insertKey can be used for specific key to the line where the new line should be inserted. I was not working with the API set prior to JDeveloper 11 g R1 PS1, then all the I can say is that if this works with the existantespourlesproduitsphytopharmaceuti, then it works with manual API so
See:
http://download.Oracle.com/docs/CD/E15523_01/Web.1111/b31974/adv_ads.htm#ADFFD19611
Frank
-
Watches of switch resets the activity data?
Switching between my two watches resets activity data and replaces the data on the iPhone. Go back to the first watch updated the iPhone to see again all activities and achieved the objectives for the day but it now shows double badges for the longest series of movement and intelligence shows me have resisted for only 8 hours, even if the chart has 13. Anyone else having issues with activity and several watches? I bought the second one, because my first has been repaired/replaced, which took some time.
Hi JWins,
Thank you for using communities Support from Apple!
I understand that switching between Apple watches has affected the data on your iPhone. In this case, I recommend reading on the following article to ensure that the process that you use to switch watches is identical to what is described in the article. Your progress should update automatically after activation.
Use more than one Apple Watch with your iPhone - Apple Support
Best!
-
Was wondering if anyone had any suggestions on how to correct the incorrect activity data? My wife has reduced its objectives to about 200 calories per day just to experiment with the application activity and she is still unable to achieve this goal, unless it's one day, she does a workout. She's up and down of the markets all day at work (which certainly would increase the heart rate to be considered exercise.)
Just curious to know if there is something you miss. You need to be a vegetable not to burn 200 calories per day. Objectives of settlement also work when they feel like it.
There are also times when she goes for a mile 3 fast walking up and down the hills and he gave her 10 minutes of exercise.
Hello
Every minute movement equaling or exceeding the intensity of a brisk walk took into account in the daily exercise goals and moving of your wife.
If she supports outdoor records his iPhone with him and walks or runs as training via the application of the session training, data GPS can estimate its distance and pace. Otherwise, it is important for his arms swinging naturally as she walks or races, because the watch relies on the movement of arms (identified through the built-in accelerometer) to follow the movement. Unless the application of the training session is used, heart rate data are not required account in the estimate of exercise or calories. The daily focus of travel is also active energy / calories (rest energy / calories are not taken into account).
Calibration of watch your wife will allow him to estimate more precisely various fitness and results related to the activity (by teaching how his arm movements relate to "Stride" lengths at different speeds).
Calories and other calculations also depend on his personal information. To verify that it was entered correctly and update over time:
-On his iPhone, in the application of Eve, go to: My Watch (tab) > health > edit (top-right).
More information:
Use the activity on your Apple Watch - Apple Support
Use of the workout on your Apple Watch - Apple Support
Calibrate your Apple Watch for better accuracy of training and activity - Apple Support
-
How to periodically send various types of data via the Serial Port?
Hello! Everyone
I have to send data to LabVIEW to my device on the Serial Port.
I know how to send data on serial port in LABVIEW, I already have this part.
Now the problem is that I have several types of data I need to question my embedded device, if I want to send the query periodically command.
So lets say that my four Op Codes are the following, which will send four different types of query command to my device on the serial port.
(To be honest only OP_LED and OP_SENSOR is used now)
0, OP_SYNC
1, OP_LED
2, OP_SENSOR
3, OP_FUTURE
Structure of basic package is as follows:
Header (0x2C), Checksum, length of the data (n bytes), Op_Code (1 byte), length (length of Code + data Op)
For OP_LED, I need to send the package as follows:
0x2c 0x02 0x01 0 x 00 0x2F (0x2F being the XOR checksum) (calculation of Checksum part is done and SUB Vi form)
Length of the package this is 0x02
0x01 is Op Code for OP_LED
In the same way
For OP_SENSORi need to send the package as follows:
0x2c 0x03 0x02 0x00 0 x 00 0x2D (0x2D being the XOR checksum) (calculation of Checksum part is done and SUB Vi form)
0x03 is length of packet here
0x02 is Op Code for OP_SENSOR
So, how can I do this periodically in labview, in such sort that period can be adjusted whenever necessary.
Is there something in LabVIEW to do.
I had done the reception and decoding part and working properly.
So I must implement read and write the part of same while loop?
Do not insert in the table if you put data in an array at index 0. Just use array to build.
No need to have Visa to write don't be a part of wire to the wire of reference and error VISA go in the upper part. These wires should go THROUGH the entry VISA.
Don't your checksum requires all the bytes up through data? Righ now, you only put the checksum on data bytes and forget the opcode and length bytes.
Your sending is not the opcode for Opsync or Opfuture. You just send the empty tables. At the same time for the other two, you put the opcode in the data table. All your original opcode in the table build thread. Get the data out of these structures in case item which is supposed to represent the opcode.
xpress_embedo wrote:
Now it works but I have now two problems.
(1) OP_SYNC and OP_FUTURE do not data, but still receive its data on serial port, can I do something here as I have nothing when the table is empty in the structure of the case.
I do not understand this statement. Perhaps my answer above will fix any issue you have here.
(2) how can selection operation Code to be send is done using control façade but real application, this task should be automated to a certain frequency, like OP_LED package must go out to the serial port to 100msec and packet OP_SENSOR must go out to 1000msec, I do this.
Now you agree a little more architecture. I would encapsulate the code that is in the while loop as a Subvi. Then with the hand of your program while loop, use two time Express VI, a game for 100 msec, the other for 1000 msec. When an express VI is true, run the Subvi with a command set waiting for the answer. When the other VI Express is true, have it run the Subvi with the other set of commands.
The device responds with anything when you send these commands? You only send data. I see no VISA Read to be able to recover all the data.
-
Initializing the elements of the array to different types of data
Hello!
Receiving data sring and write it in the table. Shot data consist of different types of data, so now I have to initialize my element of berries somehow to correct the data type. Table example:
char
char
int
int
float
float
Is it possible somehow? Or should I use the formula node or something like?
Thank you! (new)
These data resembles a cluster to create a cluster, you can create a constant of cluster on the comic book and use the cast function to fill in the cluster. Some things you need to be aware of:
What is the size of the Int?
What is the size of the float?
What is SSE-endian data.
Here are two examples:
Tone
-
How can insert different types of data in the table?
Hello
How can I insert different types of data in the table, (e.g., numeric and string) in the same index of a table.example:
index0 car 10 greencar red 11 index1
Index2 car Blue 12where green car red and blue car as string and 10, 11 and 12 in the numeric form.
then I extracted 10, 11 and 12 a digital tableand, the green car, red car, blue car in a string array
Help!
Use 'Analysis of the chain' as in the picture as an attachment. This will extract the number and color that you can add tables later.
Maybe you are looking for
-
I was updating my software and addons, everything was good. I downloaded the FF 38.0.1 Mozilla update and restarted FF and then everything was gone. My bookmarks, history, addons and passwords, all missing. I can connect to google and reinstall my ad
-
I recently had a power outage which decreased the output sound on my iMac or on the Yamaha receiver to which it is connected. I'm trying to figure out which. Is there any built-in sound diagnosis can I check to see if my iMac occurs the most of his a
-
HP dv6 (I need drivers please)
Hello world I have Hp-Pavilion dv6 with 6 RAM and i7 2630QM processor. I want to update windows 8.1 I am woundering y at - it new drivers for the new 8.1 windows? I use windows 7 knowledge (which comes with my laptop) Please, I really expect a respon
-
resize an image in the background of a chart
Hello world I managed to put a picture in the background by referring to this page: http://digital.ni.com/public.nsf/allkb/FF55BDA8C9F0C0ED862573450053A425 How can I adjust the image, now based on the background of the chart. I mean if I resize the g
-
Pavilion 15-n020us: drivers touchpad 15-n020us
I have been clean and update Pavilion 15-n020us of my Dad for him... Thus,. What's up with the driver for the touchpad Windows 10 x 64 being a pilot of "Alps" (with reset of settings to scroll and others) while the driver for Win 8 was a Synaptics, w