U2414H - Audio from HDMI source output?

Similar Questions

• Clip of MultiCam, but with audio from SEVERAL sources at the same time?

  I recorded a seminar using several audio and video sources. Audio sources include a wire tie, room microphone and read directly from a computer.

  I got all the raw materials imported into FCPX and created a multicam clip, and everything is synchronized perfectly.

  For the video, I know how to make the cut between my different cameras.

  But for audio, I would be able to play several audio channels at once - namely, lapel mic and the mic to the audience. How can I do this?

  I know I could put the multicam audio clip: setback (for example) then also drag the microphone to the audience for the game. But that means every time I make an edit, I have to make it through two sources and must be absolutely sure that they fall never out of sync.

  I guess I could drag the multicam clip in the timeline twice (one above the other, so two are playing simultaneously), with a video source set to none. But the same problem - I always have to be very careful with the changes, two parallel versions never move out of sync.

  Is there a better way to do it?

  There are also sometimes I can do some automation of the volume of the different channels... so everything what you are proposing, please keep this in mind.

  Thank you!

  In fact with a multicam clip you need not "stuff" to work with multiple audio. It has excellent support directly in the application.

  See Steve Martin explain this: https://www.youtube.com/watch?v=HE4FRDMJBS0

• How do I Zoom audio from the source monitor?

  Hello

  How Zoom in the audio waveform in the source monitor? I did the shortcut for Zoom monitor source but it does not work with audio.

  + and - buttons to zoom.  There is also a "scroll bar" which can be reduced or extended.

• can I stream audio from several sources into a single stream?

  If I have 5 users within the same distribution, can I let any audio use (talk) - I can hear all the? at the same time? (I know you can do continuous few-to-many; in such a situation audio distribution)?

  fix.

• No sound from HDMI output

  so I just plugged my laptop hp Pavilion in my LCD tv with a hdmi cable

  sounds and music can be played on the laptop when it is connected to the tv, but no sound on the tv at all.

  in my sound playback tabs, the device TICK is out HDMI NVIDIA.

  is there a solution to this? (Help please):

  Hello

  HDMI cables are supported, but not all, audio signals compatible HDMI video audio support cards. If your TV has an audio input, you might be able to connect an audio cable separated from the sound card of your computer directly to the TV. Otherwise, you need to connect the different audio signal to an output device, such as external speakers or your stereo.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• L50-A-19N satellite can not read audio data from multiple sources

  I can't read the audio data from multiple sources. It is very annoying when I have 2 youtube videos, playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 open media players and 1 youtube video playing, youtube video has no sound...
  It disappears when I plug my headphones...

  I already have all the latest drivers, the DTS driver was last updated was in 2014, his day of February of this year...

  
  
  
  
  
  

  25/02/14

  His Studio in DTS

  DTS Inc.

  Windows 8.1 - 64 Bit

  1.01.2700

  I don't know if this has the feel, but I had his most recent DTS driver that I found, it is not my laptop model, but they all seem to be the same - v1.1.88.0
  I uninstalled the DTS software and still had the same problem, then it is irrelevant on its driver somehow...

  
  
  
  
  
  

  02/10/15

  Audio driver

  Integrated Device Technology Inc.

  Windows 8.1 - 64 Bit

  6.10.6491.0

  Audio driver IDT has more recent release date, but the version of the driver is the same as the 2013 one...
  Why the older drivers of toshiba releaseing as 'NEW '?
  

  2nd is my Advanced settings speakers, nothing has changed when I disabled "allow applications to take exclusive control of this device.
  

  Sorry but I don't understand your problem.
  I tested it on my machine and if I start the music on three different sources (YouTube, player, web radio) I can hear all together, but it makes no sense to listen to music from different sources.

  Or how do understand you?

• A fall audio when you drag the clip from the Source in timeline panel

  I have problems with the audio being dropped when you drag from the Source to the timeline panel. Audio is present in the Source Panel and plays a lot with video, but when I drag the clip selected in the timeline, it drops off the audio.

  Cannot transfer video from the timeline source monitor

  It is a response to a previous topic on video, but the same answer applies also to the audio

• How to capture Audio/video from multiple sources?

  How would we go about capturing audio and video from multiple sources at the same time with Adobe premiere pro? This is essential for what I want to do with the software... If he is incapable of such a thing, I might need to consider using another program...

  Using a recorder of separate sounds... it's not "crazy" or even difficult.

  You can also reach mixer on your device to capture of live animals (camera?) but make sure its on a track audio discrete...

• 8530p - No. 5.1 channel audio on HDMI

  Has anyone got anything else than 2 channels of audio over HDMI on the Elitebook 8530p? I tried different drivers directly from ATI and HP. I tested it on Windows XP x 86 and x 64 Win7. Windows always lists the configuration of stereo audio channels 2 channels. Is this a limitation of the hardware?

  Hi again,

  I don't have a 5.1 system to try to simulate your with on problem with my Probook s 4540.

  However, I did dig a little deeper and found that someone had a similar problem on this forum a year ago. They were able to find a solution that might be useful for:

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/No-5-1-channel-sound-output-via-HDMI-only-2-ch-output-why/TD-p/460841

  Good luck!

• Export to YouTubeHD fails in encode: cannot read from the source file

  
  -----------------------------------------------------------------------------

  This is my first time using Premiere Pro CS4 and everything is fine until I get this error message in the encoder: AMEEncodingErrorLog.txt
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro.prproj
  -Output file: D:\My Documents\Adobe\Premiere Pro\4.0\Sequence 01.mp4
  -Preset used: NTSC DV high quality
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 01:45:37
  2010-08-23 19:45:56: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_1.prproj
  -Output file: D:\My Documents\Adobe\Premiere Pro\4.0\Sequence 01.mp4
  -Preset used: NTSC DV high quality
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 01:51:01
  2010-08-23 19:51:19: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_3.prproj
  -Output file: O:\Calavo\CalavoV1.mp4
  -Preset used: Custom
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 02:14:41
  23/08/2010-20:15: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_4.prproj
  -File: O:\Calavo\Sequence 01.mp4
  -Preset used: YouTube Widescreen HD
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 02:19:36
  2010-08-23 20:19:55: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_5.prproj
  -Output file: D:\My Documents\Adobe\Premiere Pro\4.0\Sequence 01.mp4
  -Preset used: YouTube Widescreen HD
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 02:23:38
  2010-08-23 20:23:57: encoding failed
  Page 1
  AMEEncodingErrorLog.txt
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_6.prproj
  -Output file: O:\Calavo\CalavoV1.mp4
  -Preset used: YouTube Widescreen HD
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 02:37:30
  2010-08-23 20:37:49: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_8.prproj
  -File: O:\Calavo\Sequence 01.mp4
  -Preset used: YouTube Widescreen HD
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 08:39:10
  2010-08-24 14:40:19: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.                                                                                                                                                                                                                                                                                                                                    Here are some details about my computing environment and this project which can be useful.  PC under XP Pro SP3 and is updated, I have a NAS 3TO where I store my videos and pictures as well as all my documents. The directories of film, photo and doc on this NAS are all drives mapped to my computer.   The project shows as 39 minutes long and consists of some .avi videos that I took with a Vado HD and lots of photos that I added narration to in Premiere pro.  Everything seems to work well when I start exporting. I can see the source and the output in the export Premiere Pro window, then when I press start the queue in Encoder CS4, the process fails and the yellow sign appears in the status column. By clicking on this sign performance opens the text messages I pasted in above. What I find particularly odd is that the error message trying to read a source file that is a temporary file on the C drive, rather than in the job file for this project, which is located on the D drive, a second HD to my computer where the Adobe Premiere 4.0 works directory is in the My Documents folder.                                                                                                                                                                                                                                                                                                                                                                                                                                            I have put a lot of time and effort into this project and I'm very happy with it, I just need to get it online.  I'm very grateful for any help you can give me.  Thank you.

  This might do the trick

  http://kb2.Adobe.com/CPS/407/kb407106.html

• MX800 No. audio on HDMI 2

  Hello

  I have a simple problem which does not make much sense, we must take a video and audio output of a MX800 so that we can record a conference and it is provide to be more difficult than expected.

  The firmware is TC7.3.4 and we find that no matter what we do, we cannot get audio on HDMI 2, which according to the manual should be supported, we can get audio on HDMI 1.

  The config looks OK

  * c xConfiguration Audio 2 HDMI output level: 0
  * c xConfiguration Audio output HDMI 2 Mode: on

  I understand that one of the DSP audio or perhaps multiple will be used for audio integrated on the system, but as the manual shows only 1 is used for each other should be available.

  We should expect audio out HDMI 2?

  See you soon

  Dave

  Hello

  There is no audio output 2 HDMI of MX800 single right now.   This is a documentation error that will be corrected.

  The associated API will be very probably removed in future versions of the software.

  Concerning

• No signal is detected by the TV (KDL55HX800) using the HDMI source devices after the storm

  No signal detected by Sony Bravia TV (KDL55HX800-S/N 8114631) using the HDMI source devices after a storm last night.  Inputs RGB and components work fine.

  I have reset to factory default

  Installed the latest software/firmware from Sony site

  Checked the HDMI cables and selected the correct entries to the TV but even problem

  What could be the problem? At main / V Board? If so, what is the replacement P/N and where can buy it go? Link to store etc.

  Thanks in advance

  Hi mgkaundi!

• How can I get firefox version 36 to play audio from our program by default selected and not embedded quicktime player?

  In our environment of the room, staff prefer to have MP3s from various sources to download open directly in the window of the program from the outside (here Goldwave is the favorite program). That being said, with the new version (36 specifically) the behavior of the program has changed so that the MP3s are open in a browser tab separated, regardless of the preferences in the window "Applications" of Options and the default values of the program in Windows. Previous adjustments to about: config media.windows - media - foundation.enabled as well as media.directshow.enabled and the setting to 'False' is more to solve this problem.

  Also, the problem of security: update your Flash Player Version 17.0.0.134
  https://www.Adobe.com/products/flashplayer/distribution3.html

  See if there are updates for your graphics drivers
  https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• I have not yet found a solution to my problem of how to organize my emails in the order deceding in my Inbox and all the files that I save emails from various sources.

  Can someone tell me how I can arrange my incoming emails in my Inbox and folders should I save emails from various sources? I tried to click on the star, but it does not work. Help!

  Click on the heading of column titled DATE. This indicates that the primary sort column. Click on DATE again to reverse the order.

  It works on any column in any folder.

  Edit: You need to read my response to the first time that you asked this question? There is no need to ask the same question over and over again in a new thread.

  https://support.Mozilla.org/en-us/questions/1005910?ESAB=a & s = & r = 2 & s = ACE

  Here's another time that you asked this question and marked it resolved. What is happening with this?

  https://support.Mozilla.org/en-us/questions/992000?ESAB=a & s = & r = 4 & As = s

• Toshiba e-Studio 3040c continues printing from other sources

  Hello together

  In our society, we have a Toshiba E-Studio 3040c next to other printers.

  It prints and basically works well, but we have the issue that if a source document is empty, it continues printing from other sources, even if there is another paper out there.

  The only point in the Web interface with: "Change the paper source automatically" is set to NO then it theoretically it should continue printing.

  Any suggestions I can try next?

  Thank you for your adived

  Erik

  You solved this problem?
  I m asking because this community forum talking about Toshiba digital products like laptops, tablets, and TVs
  I doubt that you will find here a few specialists printer.

  However, I recommend you to check this page from Toshiba for printer product information and specifications
  https://electronicimaging.Toshiba-Europe.com/