creating a copy protected disc

Similar Questions

• The copy-protected discs will not play on E535

  Someone at - he had a problem with DVD playback on a Windows 7 with Thinkpad?

  My E535 will play non-copie protected DVD that I got in a program of training years very well. But although he will play some movies from my local library without problem, there are some programs that give me an error on Windows Media Player, I need to update my drivers and DVD - RW settings or something to that effect, all pilots are still on day and everything seems to be set correctly in the control panel for the DVD - RW drive.

  And sometimes, I get a message "your computer is running low on memory.  Close other programs to continue", or something similar.  Huh? Nothing else is running.

  The weird part is that I can play these discs very well in my desktop Dell age of 8 years which is running XP and a much older version of WMP.

  FYI, my computer is Windows 7 Home Premium with 4 GB of RAM, 320 GB HD A4300 AMD and AMD graphics card.  Any help will be appreciated.

  Hack firmware of your DVD player to region 0 (no region) or use an application like DVD Region + CSS Free to do it for you in real time...

• In still - copy protection works?

  In still - copy protection works?

  I checked the box, but were never put to the test. What means CSS? the option is turned on or off

  Still won't write that a copy protected Disc... which is option when you want to create the special outing to be sent to a disc replication plant so the installation can use the 'flag' that has been set in the file then add copy protection (including a 5 seconds of research Google will show a lot of results for programs that eliminate copy protection)

  Copy Protect http://forums.adobe.com/message/2502996

  - and http://forums.adobe.com/thread/699278 measures

• So frustrated trying to create the file protected by password.

  iMac (27 inch, mid-2011

  Processor Intel Core i5 at 2.7 GHz

  8GB 1333 MHz DDR3 memory

  OS X El Capitan

  10.11.5 version

  I'm trying to password - protect a folder on my Mac. I used these instructions:

  How to create an image (encrypted) disc protected by password - Apple support

  I followed these instructions exactly, but the .dmg file that cannot be opened, not gives even me the opportunity to enter the password. I've seen several sets of guidelines online and they all vary a little, none exactly match the options given to me by my computer.

  Can someone direct me to complete, accurate instructions to password - protect an existing folder on my Mac? That understands exactly how to open and close?

  I would be so grateful! :-)

  http://www.Hongkiat.com/blog/encrypt-Mac-folder/

• SIMS 2 works do not because of copy protection?

  I just bought the laptop satellite M60 who should have just asked in the game The Sims 2. I installed the program but when I want to play, a window will appear "this program has caused an error and closes. I read on another page that maybe it's because the DVD player has a copy protection and the game stops.

  Is this the case? I legally bought and paid for the game and I am really annoyed that it does not work. Y at - there a patch or something to prevent this? I have the latest direct x version.

  It is the only game that I play but that when my kids want to play a game and the DVD Player stop my legal products? I am not at all satisfied by the player anyway because it is noisy, slow and does not all my CD and DVD data.

  Hello

  You're suggesting that this drive doesn't recognize the CD and DVD data.
  I wonder how you installed this game (program) on the laptop if the drive cannot recognize the Middle?
  However, I put t I think the problem with your game happens due to the disc copy protection. I never heard these protections on portable players from Toshiba.

  "In my view, the error message this program has caused an error and closes" is is because of the software problem. I think you should ask manufacturers of games for support. Maybe he knows more about the product clean error messages.

• In the Sonos/DRM iTunes copy protection - help!

  Hello world

  I followed the tips in this article: on iTunes Plus - Apple Support, about how to get around iTunes downloads that have been protected against copying.

  It worked I had about 800 + the songs that were copy protected, so after reading the article and wanting to get my Sonos system to play some of my favorite music, I trashed my old songs via iTunes copy-protected and only he re-uploaded the new DRM no so-called songs via my purchase history.

  After an hour to do, I opened iTunes and - unfortunately - my 'new' songs are still protected AAC files. File for each song information shows the date of purchase, and when it was still downloaded. In my case, there are about 30 minutes.

  Any ideas? I would prefer not to have to burn everything on CDs - that's a lot of CDs that will only be used once.

  Thank you all

  Christian.

  Hello

  When you remove the original track and re-download previous purchases only get you the same way you bought it. Before iTunes game, you might pay a little extra through the upgrade to iTunes more.

  You must register to Match iTunes to be able to remove the DRM. Subscribe to iTunes game - Apple Support

  JIm

• Create a system repair disc?

  Hello:

  RE: HP Pavilion DV-7-4270us Windows 7 64-bit

  Recently, I replaced an internal hard drive on the pc that is referenced above. I have re-installed the drivers and software I want.

  My next step would be to create a System Image disc?

  (I created a restore of the system or the rescue disks while the computer is new, but it would not be installed on the new hard drive, so I'm cautious in doing that, once again, because it wasn't before).

  Thank you

  Hello:

  Yes, I use Windows 7 backup tool and do a system image and a system of disc repair, so you can access the system image.

  I recommend that you use a portable hard drive, and then you can boot from this CD to repair windows for you, select restore backup image option and have your portable hard drive connected when you are recovering.

  Windows will look for the image on your drive hard laptop usb and restore.

  You can keep the image for the new installation, that you just did, or you can keep up to date and create a new image whenever you want.

  Just know that Windows will overwrite any previous system image, you created on this portable hard drive for the PC.

• where can I find driver DVD digital copy protection, decoder, card vidio

  When I try to play a vidio on windows media player, I get an error message that I need to update my DVD decoder, digital copy protection and vidio card. I don't know how to do this.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  How to troubleshoot problems that occur when you play a DVD in Windows XP

  http://support.Microsoft.com/kb/308012

  To prevent the illegal creation of digital copies of DVD, information on most of the DVDs are blurred. Your DVD decoder and Windows Media Player have software to copy protection that decodes the information on the DVD just before posting. If this software does not start successfully, you may receive this error. Remove the DVD in the DVD drive and then reinsert. This will force the copy protection software to reset.

  While the DVD is out the disk, make sure that your DVD is clean. If your DVD is scratched or dirty, the DVD player may not be able to read it correctly, and you may receive this error.

  If this does not work, try the following:

  one)

  If you have been able to play DVDs on your computer before and you receive this error message, you may be able to solve the problem by restarting your computer or Windows Media Player.

  (b)

  If you receive this error message the first time you try to play a DVD, you're not a DVD decoder installed, or your decoding software may need to be updated. In addition to your DVD - ROM drive and playback software, you must have a software or hardware decoder to play DVD decoders. devices and their drivers are available from third-party manufacturers. For more information on the software decoders, see decoder DVD plug-in. If you have a plu decoder installed, contact the manufacturer of the decoder to obtain an updated version that is compatible with the operating systems Microsoft Windows and Windows Media Player.

  You can visit follow them the links that describe on the problems of Media Player.

  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/mediaadvice/0094.mspx#E3B

  Also, look at the Media Player Plug - ins - http://www.microsoft.com/windows/windowsmedia/player/plugins.aspx

  Take a look at- http://answers.microsoft.com/en-us/windows/ee405471.aspx

• Getting the error "the device reported unexpected or invalid data for a command. (oxC0AA02FF) when you try to create the system repair disc

  original title: error 0xC0AA02FF

  I try to use a "USB" "cruzer" to create a disc repair system, but when I click on this drive to create it I get the following error message:

  "The device reported unexpected or invalid data for a command.  (oxC0AA02FF)

  Hello

  What method did you follow to create the system repair disc?

  I suggest you to create the system with different USB repair disc and check if it helps.

  Means all try the methods and check them off below if it helps.

  Method 1:

  Try to put the computer in a clean boot state, and then check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to perform check disk (chkdsk) on the computer and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: You may lose a small amount of data while performing the check disk.

  I also inform you that the data on the USB key will be lost. You should take a backup.

  You can also check with the reference article below:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

• Error code 0xc0aa0204 when creating a system repair disc

  I get an error when I tried to create the system repair disc. The error indicates that the media is upside down, (0XC0AA0204 error code). It is not upside down. How can I solve this problem?

  Hello

  With the publication of the description, I understand that you are getting an error code: 0XC0AA0204 while creating a system repair disk on your Windows 7 computer. I will certainly help you get this fixed number.

  Since the error itself says that there is a problem with the disc. While there might be a possibility of a few scratches on the disc, or it might not be readable by the optical drive.

  I suggest trying to use another drive or you can also try to use this same disc on any computer/computer to diagnose whether or not the problem is with the disc.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Failed to create the system repair disc receiving error code 0 x 80070057

  Original title: System repair

  When I try to create a system repair disc it gives me a message "the parameter is incorrect (0 x 80070057) '. In the same area every time I try to make a back-up, I get a message telling me the back-up was done, but without some missing files?

  No help available?

  Ray

  Hello Ray,

  Thank you for your response.

  I appreciate your time and your efforts.

  Please refer to the suggestions of Sharkbyter replied on 18 May 2011 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/unable-to-create-a-system-repair-disc-0x80070057/66b208a9-CD48-447C-98C3-e59f3553c842

  Note: The use of third-party software and links, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software and links can be resolved. The use of links and third-party software is at your own risk.

  I hope this helps.

  Thank you

• HP OfficeJet 6500n keeps creating a copy of itself

  Hi all

  Already have this printer for a year and it works great. The printer is using a workgroup of computers, all 4 Win7 64 bit Ultimate and everything works fine with all the computers to share resources and all the light and able to connect to the printer, a wired and the other 3 using the wireless option.

  There is only an annoying problem... The printer is connected to a computer via USB, and sometimes from nowhere share, it creates a copy of the printer in the control panel with the same name as the original one more (copy 1) at the end. This 'Phantom' printer will not appear if a job is sent to him and he keeps creating bad... I already uninstalled and installed several times including in the computers connected wirelessly and it solves the problem for a short period of time... to nowhere, from a point to another, here it is... copy 1.

  Does anyone know how to fix this problem once and for all? Any help will be greatly appreciated.

  Thanks in advance,

  Speed

  Marriage for the second time: the triumph of hope over reason...

  Hi, speedmaster.

  As you say the computer that is connected via a USB cable, after cunplug and reconnect the USB cable creates a copy of the icon of the printer, it's because of the plug-and-play feature on Vista and windows 7 (which happens on Xp). In order to prevent what you can do is to click on the start menu on your computer > click search and type services.msc and press ENTER. It opens in a local window of services. Locate the service named as HP CUE DEVICE DISCOVERY service. Double click and open that service now, select the startup type to manual and then click Stop and then click on apply and ok button. This service would stop the printer to automatically load and copy icon would not charge automatically.
  Hope for the best and you wish every possible success.

  ----------------------------------------------------------------------------------------------

  Although I am an employee of HP, I speak for me.

• How to create a copy of an object

  In my application, I want to make some changes on a custom object, also I need the old object restore, so I would like to create a copy of the object, please help me create a copy of the object,

  There is no API to do this, you must create a new object and copy all of its attributes, one for one. Take care to create new instances if all attributes are objects.

• Get an error "Windows repair disc has stopped working' when creating Windows 7 repair disc.

  * Original title: Windows 7 cannot create a repair disk

  Hello

  I have a new alienware desktop computer running windows 7. When I try to create a system repair disc, I get an error message that says that Windows repair disc has stopped working, this happens until I get to the screen that allows to select a drive. Here is the crash report. I have read some of the related posts and I don't think I have the synchronization of the box and I did not backup Dell although I have something called AlienRespawn.  Please help thanks.

  Problem event name: APPCRASH

  Application name: recdisc.exe

  Application version: 6.1.7601.17514

  Application timestamp: 4ce7990e

  Fault Module name: ole32.dll

  Fault Module Version: 6.1.7601.17514

  Timestamp of Module error: 4ce7c92c

  Exception code: c0000005

  Exception offset: 00000000000284fb

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information 1: e574

  More information 2: e57488545f86d383cf00c40c411daee5

  3 more information: 6d8c

  Additional information 4: 6d8c259a187c440c17982de29c5dc6e7

  Hello

  The problem was definitely Alienrespawn. I was able to create the with Alienrespawn recovery disk and turned off once I was able to create in Windows 7.

  Thank you very much for the help!

• Cannot create files on a disc which I am the owner of and have all permissions to write in. (Error 0 x 80070522)

  I have two hard drives in my computer.  When I try to create or copy files to the root of my drive D:\, I get an error message (see image below).  I have possession of the car, as well as all the permissions.  In addition, there is no set of permissions of 'decline' (see image below).  How to solve this problem?

  Error message and permissions:
  http://img51.imageshack.us/img51/3484/permissions.PNG

  Hi tehshibz,

  Please use the Microsoft Windows 7 forum.

  Belongs to your computer from a domain?

  This is by design and is a function of (UAC) user account control and the
  ACL on the root of the drive. The ACL allows that the administrators and system
  for writing files to the root of the drive. UAC means that even if you are a
  Member of the group from the administrator, you are not running as an administrator, unless
  raise you.

  If you really want, you can launch a process allows you to write the
  files with as an administrator, then you can write. If you try to
  Drag / move a file, you get a prompt for elevation. It is recommended that
  solution is do not store data however.

  If you really want to store files in the root of the d: and you do not want
  raise every time, you can resolve the situation by adding an access control

  list entered for your account to the root of the drive, as follows:

  1. click on the window button: all programs: Accessories
  2. right click on command prompt
  3. Select run as administrator and accept the prompt
  (4. run this command: icacls d:\/Grant fooSadOI) (CI) (M)

  That grant foo user alter permissions on d:\. All objects (IO) and
  containers (CI) will inherit these permissions. You replace foo
  with the name of your user account.

  Once do you any application you run as user foo will be able to store
  data at the root of the C: drive. You will also have losened default
  security settings, with all the caveats that implies.

  Your user profile may be damaged and therefore you can remedy.

  Follow the steps in the link for the Fix damaged user profile : http://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile

  For more information, see: http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/08ef075c-3cea-4397-9d7a-622eed7faa35
  http://social.technet.Microsoft.com/forums/en/itprovistaannouncements/thread/b5e69635-038b-4A80-8786-70e1b1d8be0a

  hope this helps
  Aziz Nadeem - Microsoft Support