8530p - No. 5.1 channel audio on HDMI

Similar Questions

• Cannot get DTS/multi channel audio via HDMI

  Hello
  I'm trying to connect my VAIO SVT15112CXS to my Bravia HDTV via HDMI to get multi-channel audio (DTS/DD) from my Bravia HT (connected to the TV via optical) with no luck at all.

  I have the same setup for PS3 works well, is it cable or equipment.

  I have already updated all the drivers.

  When the TV is not connected I don't get an Audio HDMI option in the playback devices (I checked to show disconnected devices / disabled) and when it is connected I do not get an option to change the configuration of stereo speaker.

  This way I get only Stereo sound.

  I tried passthough HDMI via ffdshow config (installed K-Lite codec pack) and there is no sound in this way.

  Is there a solution? something escapes me?

  Thanks to all in advance,

  Thanks for your time and your response.

  I got it actually work! updated drivers audio and video (not Sony ones sugested, but later of Intel and Realtek) and now I have everything works as it should.

  The only minor problem is that Vaio Care now wants me to go back to the previous version of the driver, but I'll just ignore it.

  Everyone, try this if you experience this problem.

• dv3-2222tx without the audio via hdmi

  I have a HP Dv3-2222tx, and when I conn. Cable HDMI to TV, him dosent sound work, I have chosen in my Audio out HDMI, as well as in the IDT Audio control, I can see on the indicator that it is strong, but can not hear it. I tested already and also cable TV.

  We hope to help

  Hello

  Without the menus are locked.

  But anyway, I have my Nvidia updatede and then it worked.

  Thanx

  Ken

• Record 2 channels audio WebWorks API?

  Reference on the WebWorks API indicates that the recording from microphones is possible on a single channel. However, the application of voice Notes record clearly on two channels, as can be easily shown by moving the Playbook from left to right while he was recording his own voice. Where can I find the API WebWorks for 2-channel audio, record from the MICS Playbook? Thank you.

  It is currently not possible.  I have added your request to github issues as an improvement to the feature list:

  https://github.com/BlackBerry/WebWorks-TabletOS/issues/54

• MX800 No. audio on HDMI 2

  Hello

  I have a simple problem which does not make much sense, we must take a video and audio output of a MX800 so that we can record a conference and it is provide to be more difficult than expected.

  The firmware is TC7.3.4 and we find that no matter what we do, we cannot get audio on HDMI 2, which according to the manual should be supported, we can get audio on HDMI 1.

  The config looks OK

  * c xConfiguration Audio 2 HDMI output level: 0
  * c xConfiguration Audio output HDMI 2 Mode: on

  I understand that one of the DSP audio or perhaps multiple will be used for audio integrated on the system, but as the manual shows only 1 is used for each other should be available.

  We should expect audio out HDMI 2?

  See you soon

  Dave

  Hello

  There is no audio output 2 HDMI of MX800 single right now.   This is a documentation error that will be corrected.

  The associated API will be very probably removed in future versions of the software.

  Concerning

• Convergent Odyssey 8 channels Audio errors on first 2015.3 Proxy

  So I try to use images of Convergent Design Odyssey 7 q +.  I have the latest firmware on the Odyssey in which all the video files are failing to 8 audio recording channels.  It is an option greyed and saving some files, in my case, a file of Sony, he let me only to record 8 channels of audio.  Not less.  When I import a file saved in the first, everything is as it should be.  When I try to create a proxy of the new feature of Adobe proxy, I get an error.  Invalid audio type.  The H.264 preset does not support 8-channel audio.  If I change to a quicktime it creates a proxy very well, it's just much more.

  Anyone could create their own preset who ignore the extra 6 audio channels?  Or someone else has experienced this with a work around?

  The current Proxy workflow doe requires audio channel mapping and you have already noted, export H.264 does not support the 8 audio channels, but QuickTime does. You can select a codec and settings in QuickTime so that the file size smaller, if that's what you want. for example: Apple ProRes 422 (Proxy) with a smaller image divisible by your original media size.

  This will give you the file size reduced, to maintain good quality and is a codec that is well suited for the editing.

• Export DNxHD with 8 channels audio multi... Problem! the final file only stereo all mixed with 6 empty strings.

  I export DNxHD with 8 channels audio multi... My problem is that the final file all mixed in the first 2 stereo channels with the channels empty rest 6.

  I'm lost on what could be the problem.

  The main audio channel is 8 channels... NO stereo.
  Export, I chose DNxHD and audio 48000 Hz with 8 output channels

  
  What could this be? I need to deliver a film with the 8 mono channels.

  Really appreciate all the thoughts/help!

  Thank you

  Christian

  That's how I would implement mixer in CS6's using a sequence of 8 track with 8 mono channels (mono channels using maintains levels matching, stereo and standard tracks can cause differences in level of 3db). Note the Red output channel selection and the panpot position indicated in blue.

  

• I'm trying to export multi-channel audio as apple pro res 422 HQ, but the tracks are all coming full joint rather than separately. I've implemented the multi Channel sequence already. What I am doing wrong?

  I'm trying to export multi-channel audio as apple pro res 422 HQ, but the tracks are all coming full joint rather than separately. I've implemented the multi Channel sequence already. What I am doing wrong?

  All 4 titles are coming as complete blends not divisions. I guess that's a problem with the entrenchment of the channels, but can't see how to fix. Andy

  Is what would you say to my quick thought without following through all the processes after the fact, the sequence settings? My thought is that the sequence settings must be multichannel as you show, but each Adaptive track, so this channel map is routed at your leisure. If this is not the case, already, it would create a new sequence with these settings.

  I try to upload the photo

  

• 1 Channel Audio convert to 2 channels

  1 Channel Audio convert to 2 channels.

  I have a few old Hi8 video tapes that I recently converted to DV, but I don't have a single audio channel, is there an easy conversion to two audio channels. I know I could do all the audio work in SB, but here a simple way to this PR in

  Thank you

  MAB

  Take a look at the clip > Audio mapping Options.

  for example. Mono Stereo etc.

  Its much easier and faster to map the original videos rather than apply effects to all.

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• The macmini split audio video hdmi using mini stereo out?

  Hello

  I need to play a dvd for the first time next week - for a public event

  using the mac mini mid-2011, i5 2.3 ghz, superdrive, yosemite

  using hdmi connector as the video signal on a vizio tv and...

  I need the audio output through Jack for headphones (stereo mini) for an audio mixer.

  Y at - it no problem with that or everything simply select the audio output from the audio out of system preferences?

  I guess that it is the same thing as my Macbook Pro, where I did just that - if you plug the cable into the headphone jack, it should work without needing to select the output in the Prefs. If you check with a helmet, you must confirm this. Having a video output running will not affect this.

• No Sound / Audio via HDMI with Satellite P840T

  Hi Forumites,

  I connected my Satellite P840T on my TV via HDMI Panasoni. Video works fine but no sound. The same cable and TV work fine with my laptop Del.

  I have read the forums, and we're talking about going into control panel > Sound > reading tab and selecting device HD Audio for playback, but on my P840T, IT IS No. HD Audio device for the indicated reading.

  I right click and checked the boxes to see the disabled and features show disconnected, but still nothing.
  I have download the latest drivers for the OEM Toshiba Intel HD4000 version show that the P840T seems to have, but still nothing. (The Audio drivers for the HDMI port part of the display driver right?)

  What else can I try other than to wait for the next version of the OEM Toshiba display Intel HD4000 version?

  Thanks in advance
  Mark

  > I have read the forums, and we're talking about going into control panel > Sound > reading tab and selecting device HD Audio for playback, but on my P840T, IT IS No. HD Audio device for the indicated reading.

  .. and what audio playback devices are available next to the speakers?
  In my case it is not peripheral HD audio but the Digital Audio sound called.

  By the way: what system are you using? Have you installed the new Windows or do you use the preinstalled Toshiba system?

• DTS - HD and Dolby TrueHD audio via HDMI or S/PIDF. Is this possible with HPE-140sc?

  I have an audio DTS - HD and Dolby TrueHD via HDMI or S/PIDF of blu - ray movie? I request because the Nvidia homepage not listed this support function for gtx260 (http://www.nvidia.com/object/3d-vision-requirements.html) and the homepage of Reatek'a is the same for ALC888S (http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PFid=28&Level=5&Conn=4&ProdID=141).  What kind of problems is if there is no support in the HPE-140sc for Dolby TrueHD or DTS - HD audio? 3D-Cinema compatible reading is necessarily I can't find reading compatible sound card 3d video. Is the cheapest solution in this case buying gtx460 if I want to get DTS - HD and Dolby TrueHD audio?

  Pether, I don't think it's possible with the GTX260.

• No Audio output HDMI signal

  I am running Windows Vista SP1 on a laptop HP Pavilion.  I would like to use a TV high definition as an external display for slideshows read and other audi/visual media on the mobile phone.

  I connected the laptop and the TV via their HDMI ports with a HDMI cable and I get a very good quality image on the TV, but no sound.

  I used all the options on the TV for audio and everything seems OK.  So, I suspect that the problem is at the end of the computer.  Does anyone have suggestions for how I might solve the problem?

  Thank you

  After trying all the combinations configuration listed here in every permutation in the Sun, my resolution was to "* roll back the NVIDIA device Drriver."

  At one point, I had accepted an update General-NVIDIA Microsoft pilot. It was my mistake. Make sure you have the driver that was created for your computer model.

  My laptop is a HP DV9000 under Vista SP2

  I could go to the control panel-> Device Manager-> display-> NVIDA-> driver and select 'dismantling '.

  That he solved it for me.

  Make sure that you first, configure a restore point in case is not your solution.

  Good luck.

• How to have separate video and audio over HDMI output Lenovo Thinkpad T410

  I have lenovo T410 and wanted to connect it to my TV high definition. Earlier had problems, but after buying SIIG Displayport to HDMI its job very well. In fact the video and Audio can now be read / listened to on my HDTV via HDMI. However, I have a separate 2.1 computer speaker system, which has much better sound output than my HDTV. Now if I want to see the video on HD TV via HDMI and audio output to speakers for laptop (connected to the 3.5 mm wired 2.1 speaker system), how to do that. I went to SmartAudio settings in the Control Panel, but there is no option of separates HDMI audio to the speakers only.

  I don't want to buy another cable with RGA Audio Converter 3.5 mm female port. Please suggest a direct solution.

  in win 7 do a right-click on the speakers on your lower right corner icon, select playback devices, click on speakers, click on set default, click OK and it should work (sound must come from your computer speakers or the computer 3, 5mm jack)