U2414H monitor has stopped working.

Similar Questions

• HP Digital Imaging Monitor has stopped working.

  I get a message that HP Digital Imaging Monitor has stopped working when I boot.

  My printer is a Photosmart 8180 and all updates are installed.  My OS is Win7 x 64. with all the updates and I use NIS 2012 again with all updates.

  I then get a message let me allow windows to solve the problem and then close I have to, but the problem always comes back.

  where are these files located I can't find them anywhere to add exclusion. I keep losing the ability to wirelesslsy use it all in one printer. I can't find any rhyme or reason for him to quit. I scanned some photos in and go. I use a dell xps win 7 Home premium. HP Photosmart Premium C309g-m BT. It has been uninstalled and reinstalled, printer Dr. and all kinds other suggestions of HP forums. I have him granted full trust and he excluded from the analysis of the IPS. same ole.  It has not affected my laptop until yesterday, now suddenly too is upward. Any help is appreciated.

• GFXUI and intel turbo boost monitor has stopped working

  I get errors that gfxui stopped working, and also that the intel turbo boost monitor has stopped working. Have installed all the drivers and installed their return. Also uninstalled microsoft NET framework and installed back. Always the same mistakes. What should I do?

  Almehand

  in the Panel "programs and features".

  Select "turn on or off windows features.

  then scroll down and look for ".net Framework 3.5.1."

  first disable and uninstall

  then restart the PC

  then, click on the checkbox to re activate .net Framework 3.5.1.

  Restart the PC

  Let us know if this solves the problem

• At the opening of my Compaq Presario I get the Microsoft message "Printer Card transfer Monitor has stopped working"

  I have a Lexmark X 6570 all in one. I tried to restore to comm. between the printer and my Compaq. I uninstalled the Lexmark program (twice) and then downloaded the latest driver from Lexmark, but always the same message. What can I do to recover my printer? It is very important for me. In addition, the message in the window of the printer when I try to scan shows "cannot download the application list. Can someone help me with this? As you can probably see, I'm not very 'computer', but I can follow directions! Thank you and have a great day!

  I assume you are using the wireless printer. You have made no changes to the network recently? For example, new router or wireless password has changed.

  For the problem of scan, I found the following procedure works.

  • Enter the IP address of the printer in the address bar of your browser and press ENTER. If you do not know the IP address, print a Network Setup page using the procedure shown on page 52 of thehttp://www.lexmark.com/publications/pdfs/2007/6500/v4897402_en.pdf user's guide. The address will be probably 192.168.x.y where x.y is the number assigned to the printer.
  • Now, you will be connected to an administrative page on the printer.
  • Select Configuration.
  • Select a scan in the management of network hosts.
  • Check users to delete all registered.
  • Select Remove.
  • Try to start a new search.

• Premiere Pro CS6 Mac - second monitor has stopped working

  I've been using CS6 configuration dual monitor for a few weeks.  I activated the second screen for video playback in the settings and everything worked very well.  Now for some reason any the second screen no longer works with Premiere Pro for playing video (it will not preview fullscreen) even if for my second monitor option is checked in the preferences. I makes no changes to my system I know.  I really want to understand this because it is quite annoying and frustrating that it worked perfectly for 2 weeks and now it doesn't work at all. (Have restarted system already) Any help would be greatly appreciated!

  I spoke with tech support and they were able to help me solve the problem.  The solution involved moving my program on the second monitor and then reverse the setting of the option (IE, do the main monitor my monitor reading)... after that, I went it back by moving the program on the primary monitor and set the secondary monitor as my reading screen.  Seems to work fine now.

• How can I fix monitor control center catalyst which has stopped working?

  This program has stopped working & therefore a Driver Detective

  Hi foxy1948

   

  1. did you of recent changes on the computer?
  2. for how long have you been faced with this problem?
  3. what happens when you try to use programs? Do you get any error messages?
  4. have you tried to reinstall the programs?

  The catalyst control center monitor and driver detective programs are non-Microsoft programs. So, you can even try communicating with the support of the manufacturer for assistance in case the problem is only with these programs in particular.

   

  I hope this helps.

• Suspension of monitor and hard drive has stopped working

  I had to reinstall my copy of XP after that I accidentally deleted the Isass.exe file, and do so to found the scroll to be less than adequate and time allocation for the monitor and the hard disk to stand down has stopped working. I can't put the computer in standby mode. If I use the screen saver, it lights up at the set time, but when the time is reached in which the monitor is supposed to withdraw, the screensaver disappears and the full screen returns. After that, the screen saver is no longer turns on until it is reset. In addition, the condition "save under" on the power selector is not save configurations.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• "Plugin - container.exe has stopped working" error during installation of Firefox 36.0 via SCCM if Firefox is open during installation.

  When installing Firefox 36.0 via SCCM (System Center Configuration Manager), if the previously installed version of Firefox is open during the new installation, an error, "Plugin - container.exe has stopped working. A problem caused the blocking of the program works correctly. Please close the program. This problem occurs only if Firefox is open during the installation, otherwise the installation is successful. Note: I have included a taskkill to 'firefox.exe' in my installation script to stop Firefox runs.

  There are new logic in Firefox 36 monitor to stop crashes while the Mozilla Crash Reporter can capture data. This could have the effect of killing her task, I'm not sure. Maybe you have to kill plugin - container.exe before firefox.exe? I'm not familiar with SCCM and it might have a more graceful way to close an application.

• Re: By pressing FN + F5 message: module IGFXEXT has stopped working

  When I press Fn + F5 I get the IGFXEXT message module has stopped working and I can not change the configuration of my monitor. I briefly see the icons, but when I cancel the error message that they disappear.

  I downloaded and install ed on 10-09-08 driver download Toshiba Intel.

  What is the problem and how can I solve this problem. She has been there since I bought the machine.

  Hello Michael

  To be honest, I can't believe that this error occurs on the first day. Each recovery image has been tested, and I think you're the first person that relates to this topic.

  You probably installed driver to display again, but the FN + F5 key feature is controlled by Toshiba designed utility.
  I can't offer no precise answer, because I t knowledge which model cell phone do you use or what operating system is installed on your laptop. That's the big difference between Vista and the tools for Windows XP Home edition.

  I'm sorry.

  Another tip: change the subject of your thread. The subject does not. Subject well written can be responsible for more hits on this thread.

• Equium A100-338 display has stopped working

  Hello

  I have exactly the same problem on my Equium A100-338 loaded with Vista.
  The display has stopped working (he went to a poorly lit black screen) after I had rebooted my machine even if the computer and the hard drive seems to work Ok with the lights on. I tried the usual elimination of power and the battery and restart it tricks, but after initial success it has stopped working after a few weeks.

  Once I had the computer operation that I only closed it down in the mode 'sleep', and he continued to work for a month until that he should be released after a windows update. I then plugged an external display and use of the Fn + F5 key got the external display running.
  Low and behold, the screen of the laptop started working again as if it had been "energised".

  I took what the laptop screen was OK and that he would not need replacement.
  The laptop worked OK until it needed to restart another when the unrest started again. The screens are gray on the monitor and the laptop now.

  These problems seem to point to a flaw in the display driver or VGA card, have you received updates or suggestions?
  Now, I bought another laptop Toshiba Satellite to connect to the forums trying to find out if my original computer can be repaired
  These problems seem to be quite common on Toshiba computers.

  Any help members would be welcome.

  > These problems seem to point to a flaw in the display driver or VGA card, have you received updates or suggestions?
  For the most part a graphics card driver must be reinstalled or updated to a newer version it can also be a problem of OS which means that the new facility could help
  But try to update the display driver

• Pressing FN + F5 message: module IGFXEXT has stopped working

  Pressing FN + F5 message: module IGFXEXT has stopped working
  I use Vista
  Model - Portege M700

  With FN + F5, you can switch between monitors.
  The igfxext.ext belongs to the common user interface from Intel and it s stored in the path % system%\igfxext.exe.

  So in your case, I'll try to update the display driver. I think that this is causing the error.
  You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

• Qosmio G30 - GPU has stopped working

  Hello

  I have Toshiba Qosmio G - 30 portable series.
  Same problem as all the others. The GPU has stopped working. Tried with external monitor too, same thing.
  This is the 3rd time what happens.

  Finally 2 times had to be repaired. The guys at Toshiba just suggest a motherboard replacement, which is about $1000 USD.

  In INDIA, they have the very worst customer service, taking customers for granted.

  I'm trying to get the GPU: nVIDIA GeForce GF-Go7600-N-A2 G73M GPU BGA Chipset, replaced.

  E Bay, some sell one those given to NINE and some new.
  NEVER HEARD OF A CHIP SE RE_FURBISHED.

  Can someone help me please?
  Is this the replacement work and what is a smart refurbished?
  Which will work?
  Does anyone know any service center etc. in INDIA who can do a good job on this?

  Help, please.

  Thank you

  > E - Bay, some sell one those given to NINE and some new.
  > NEVER HEARD A CHIP SE RE_FURBISHED.

  I don't have never heard about refurbished CPU or GPU, the internet is a vast world, and you can always find strange and products
  To be honest I would not take it. For me it sounds too strange

  However, the GPU malfunction is really annoying problem. The fact is that in most cases, the motherboard must be replaced and it is always a costly affair if the guarantee is no longer valid

  You have a service center in India.
  Well, I found this database ASP from Toshiba. You will find all the FSA all over the world.

  http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

  In India, were more of * 50! ASP *.
  I recommend that you get in contact with some partners and ask what's possible

• Satellite A100 - screen has stopped working

  Hello

  yesterday in vista, he said that he detected an external monitor, even if I never used any external monitor to my laptop. In display properties, he said I had several monitors and in Device Manager it says that I had a pnp and a monitor not Plug-and-Play...

  The screen has stopped working after a reboot. I see nothing on the screen during the loading process indicating normally the toshiba and the vista loading screen. But once vista has started (the sound still works), the screen works again.

  This has me worried and I reinstalled vista from the cd, but now the screen never... never.
  But I know that vista has been correctly installed that after what he asked, can I still use alt + f4 and enter to stop.

  Well, I can't even make troubleshooting procedures on my own that never, the screen now works. -.-
  Does anyone have experience with this?

  Hello

  I've never heard of such question it s so very interesting to hear about this issue. Given that you never connected an external monitor, it must be something else...
  Did you ever done some update the BIOS on this machine?

  Maybe, if you have some, this could be the problem. Otherwise, I have a work around (it could be useful):

  Remove the AC adapter and the battery from the machine and leave the machine for some time (1-2 hours). Then, start the machine and check if it works.

  If this isn't the case, then you must send your machine to the service since it could be a serious hardware problem (I mean if you really reinstalled vista and problems persist after the reinstallation, then it IS definitely a hardware problem).

  You can also try some update BIOS if it is not already done...

  Welcome them

• Bluetooth has stopped working on my Satellite P105-S9722

  I have a Satellite P105-S9722 and everything seems fine except the occasional extreme overheating it stops. In any case, my blutooth has stopped working.

  Here's what I've done so far:

  1 formatted, reinstalled clean (running the toshiba Vista business upgrade)
  2 tried to use the most recent bluetooth Vista drivers fron this site & Blutooth monitor 3 w / stack windows

  I tried several times without success. Here's what's happening.

  When I install toshiba stack, it is all the way to the grip and "install bluetooth driver". I get an error message on a USB device unknown who breaks down and will not be installed. It is under the TouchChip Fingerprint coprocessor. In addition, with the Bluetooth Monitor 3 installed, has no "BLUETOOTH" category in ther CP to set properties

  That's all. It hags just here and bogs of the bridge I have to restart the system.

  Any suggestions?

  Thanks in advance!

  If the laptop is overheated, you must remove the dust from the radiator. You can use a can of compressed air to blow off the dust.

  Have you tried to use the battery Microsoft Bluetooth standard instead? To use it, you must uninstall the Toshiba Bluetooth stack, then just install the Bluetooth screen

• HP Pavilion dv7 6b51ea: GPU stuck at Intel, AMD GPU has stopped working

  A year ago, I received a notification of the CCC AMD the driver update and did. Since then, the 7400 m has stopped working and still did not so after;

  (a) rolling back drivers

  (b) reinstall the drivers from the HP website

  (c) using the system to factory settings restore

  After some research I found that the discrete GPU in HP laptops only works with the drivers offered by HP, but those who fail to solve the problem of too.

  I put Powerplay use Max Performance and even tried to disable ULPS, which of course failed because the system is locked ' dynamic single setting.

  Active power plan still shows as powerful, but it's the GPU integrated in use, not dedicated

  Also recently upgraded to Windows 10, had no problems but GPU problem remains

  AMD Catalyst Control Center poster always I have 7400M and hardware of MSI Afterburner monitoring shows his temperature to 45 c but 0% use of the GPU.

  When running games that allowed, with Powerplay can jump on the 7400 M, still work on the weak integrated Intel graphics.

  HP Support Assistant cannot detect all problems, troubleshooting

  HP Pavilion dv7-6b51ea

  Appreciate the help.

  Thanks for your help, very much appreciated a response.

  Assuming that I am in a bind.

  HP should not make laptops for gamers or those who buy specifically for the use of the dedicated GPU, if they cannot upgrade their GPU drivers dedicated by the manufacturer of this GPU IMO.

  Sister with a DV6 bought with my DV7 (2012) was lucky, I tried the update before she accepted AMD update notification

  Guess I will gift to a parent who does not require the dedicated GPU and I'll have to make sure my next laptop supports the amd/nvidia driver unlike HP updates of course