Suspension of monitor and hard drive has stopped working

Similar Questions

• External hard drive has stopped working.

  I have a 500 GB WD external hard drive book that has stop working. He is no more, but I know that it is always powered because I can see that the lights are still coming when I plug in the power cord inside. No one knows anyway I can get access to the drive so that I can get my data on the disk. It was about 80% full and I was trying to take data out of the car so that I could make cleaner. It was not terribly fragmented, but I need to take some of the data out of the car that's why I was burning there CD so that I could do when he leaves. Now I can't access the drive at all. Does anyone know of a way I can access the drive so I can get my data?

  The only thing I've heard to try and get a non-filature spinning disk long enough to get the data off the drive is to put the drive in the freezer, let cool completely, and then quickly remove it and try to make it work.  Sometimes this will release bearings long enough to allow him to run for a few minutes before it warms so that you can get the data.  No guarantees, of course.

  Good luck
  JW

• It seems that since I installed norton security 360 v3 to my vista computer that my hard drive has stopped working error code 19 something to do with the registry

  Code 19

  Description:

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 19.

  Signature of the problem:

  Problem event name: PnPDeviceProblemCode

  Architecture: x 86

  Hardware ID: SCSI\CdRomHL-DT-STDVDRAM_GT20N___CP02

  Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}

  The PnP problem code: 00000013

  Driver name: cdrom.sys

  Driver version: 6.0.6002.18005

  Driver date: 11/04/2009

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 3081

  Read our privacy statement:

   

  Hello again once again not good it is the message that I'm getting ideas?  Thank you, Rob

  Hello husa58,

  Equip your Vista OS dvd, see below:

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the command sfc/scannow. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• HP pavilion n203tx 15: Amd driver has stopped working and has recovered

  Hello ive been using this laptop for 2 years now and ive started suddenly get this error "amd driver has stopped working and has recovered" and sometimes one of the apps I open freezes and then I get BSOD with errror "AMD pilot State failure" any help would be appreciated.

  my laptop is Hp Pavilion 15 n203tx im using windows 8.1 I have amd radeon hd 8670 m graphics card

  Thanks in advance

  Hello

  Try this

  install the following in the same order

  Chipset: http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63965.exe & Reboot

  Graphics: http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64573.exe & Reboot

  BIOS: http://ftp.hp.com/pub/softpaq/sp73001-73500/sp73288.exe & Reboot

  Or if you have assestent installed on your laptop supports HP run all updates of pilot who.

• The screen flashes and goes out, error: "intel graphics driver has stopped working".

  Original title: Intel graphic driver

  My computer screen starts flashing, then goes and then this message appears "intel graphics driver has stopped working" when I try to get the answer it says "windows cannot download solution at Thøis" I tried a lot but he continues to themselves, what can I do?

  Hello

  (1) when encounter you the problem?

  (2) have what troubleshooting measures you tried?

  (3) remember you to make changes to the computer before the show?

  You can try the following methods and check the status of the issue.

  Method 1:

  Configure the computer to clean start State to check software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the above article.

  Method 2:

  Uninstall and reinstall the display adapter drivers.

  (a) start Control Panel, click hardware and sound and then click Device Manager.

  (b) to expand the node that represents the type of device you want to uninstall, right click on the entrance to the unit and click on uninstall.

  (c) in the dialog box confirm the device removal, click OK to start the uninstall process.

  (d) when the uninstall is complete, the site of the factory driver download and install the drivers.

  (e) after installing the drivers, install the latest updates.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

  NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

  Message that appears is: -.

  Windows has stopped this device because it has reported problems. (Code 43)

  BB

  Install the latest driver from nVIDIA:

  http://www.nvidia.com/object/Win7-WinVista-32bit-260.99-WHQL-driver.html

  http://www.nvidia.com/object/Win7-WinVista-64bit-260.99-WHQL-driver.html

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• display driver has stopped working and recovered

  In my laptop, I get a message from the display driver has stopped working and my screen goes black and crash suddenly

  Details of my laptop are
  Compaq 620
  Windows 7 ultimate 32 bit
  Intel (r) Core (TM) 2 Duo CPU T6570 2.10 GHz
  Display map Mobile Intel(r) 45 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
  Hitachi HTS545032B9A300 ATA Device driver
  Display Mobile PC screen 1366 * 768

  Help, please

  I would start by removing the current driver and installing the latest driver available.  (yours is 5 years old)
  

  
  

  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.
  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time

  For more information please read this blog http://captaindbg.com/bug-check-0x116-video_tdr_error-troubleshooting-tips/  

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557263%28V=vs.85%29.aspx

• Intel Graphics driver has stopped working and fixed

  Hello

  Just for a few weeks, I get an error message whenever I try to go that you tube, Intel Graphics Accelerator driver has stopped working and got windows xp. Although I use windows 7 64 bit, I get windows xp driver error.   Anyone has any ideas how to fix this error...?

  Thank you

  Osama

  Hey Osama,

  I suggest you to see Web site intel to learn more about questions to know about errors in Intel.
  http://www.Intel.com/support/graphics/sb/CS-009483.htm

  Send us updates after trying the steps above.

• Whileusing Windows 7 crashes Firefox (Graphics Driver has stopped working successfully and corrected)

  My problem is that my Windows 7 freezes and crashes completely while surfing on the internet on Firefox.
  Sometimes, it displays a message: "ATI Graphics Driver has stopped working and successfully recovered."
  I use a Dell Inspiron N5010 laptop.
  Windows 7 (64 bit) - all the latest updates are installed.
  14.1 Firefox (latest) - all the flash player and other plugins are updated to their latest version.
  ATI Mobility Radeon HD 5470 graphics card
  Card drivers are: aticfx64 aticfx64 aticfx64 aticfx32 aticfx32 aticfx32 atiumd64 atidxx64 atidxx64 atiumdag atidxx32 atidxx32 atiumdva atiumd6a atitmm64

  The only solution is to restart the computer or disable in Firefox hardware acceleration.
  The arrows on the websites like Facebook.com and Google.com becomes rectangle, triangle, when I turn the anisotropic offshore screening of ATI Catalyst Control Center.
  So what to do?
  Any correction or suggestion?
  Or should I disable the Hardware Acceleration of Firefox?  :(

  Hello

  1. doesn't this problem occurs when you try to play all the videos of any particular Web site?
  2 have you made changes on the computer before this problem?

  Method 1:
  You can check the issue using Internet Explore. If you are facing similar problems using internet explorer, then you can try to disable software rendering in internet explore and check. Read the following article.
  How to enable or disable software rendering in Internet Explorer 9
  http://support.Microsoft.com/kb/2528233
  Method 2:
  You can read the following article.
  Windows 7 hangs or freezes
  http://support.Microsoft.com/kb/2681286
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Note: all data that are infected must be cleaned only by deleting all of the data, which means there is a risk of data loss.
   
  Method 3:
  You can try to uninstall the graphics drivers from Control Panel/Device Manager and reinstall from site Web of ATI. Follow the steps to uninstall drivers.
  (a) click Start.
  (b) in the Search tab, type devmgmt.msc and press to enter.
  Expand c) display adapter and right click on the ATI driver.
  (d) click on uninstall.
  (e) now, close the Device Manager window and restart the computer.
  Now reinstall the latest graphics drivers from the site Web of ATI. Check out the following link.
  http://support.AMD.com/us/pages/AMDSupportHub.aspx
   
  If the problem persists contact support Firefox. Check out the following link.
  http://support.Mozilla.org/en-us/home
   
   
  It will be useful.

• Need help, get message display driver has stopped working, but has recovered

  Had no problems until recently, my freezer of mouse and screen, then get message display driver has stopped working, but recovered it gets really bad, please help

  Hello

  1. what operating system do you use?
  2. What is the brand and model of your system?
  3. Once you get this error message?
  4. you did it before the issue of any material changes or software?

  Try the steps outlined in the methods mentioned below and let us know if it helps.
  Note: The following Microsoft Articles are applicable for Windows 7 and Vista.

  Method 1: Boot your system in clean boot mode and temporarily disable your antivirus software. Check if get the same error message or not.

  Step 1: Try now to the KB article to perform the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Important: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

  Clean boot in XP:

  Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Step 2: Turn off the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3: update the driver for
  

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: Please visit the manufacturer's website and download the latest driver for your graphics card.

  Method 5: Windows 7 power save settings reduces the voltage to the video card too well when it is inactive for some video cards.

  To resolve this problem, disable the display (Plugged In) turn it off and turn off the display (on battery) power settings by using one of the following methods:

  Use the Group Policy settings:
  To resolve this issue by using Group Policy settings, follow these steps:

  (a) click Start, type gpedit.msc in the search box and press ENTER.

  (b) in the local Group Policy Editor, expand models of administration under Computer Configuration, expand System, expand power management, and then click display and video settings.

  (c) in the dialog box that opens, double click on turn off the display (Plugged In), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  (d) in the dialog box that opens, double click on turn off the display (on drums), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  Use the powercfg command:
  To resolve this issue by using the powercfg command, follow these steps:

  (a) click Start, type command prompt in the search box, and then click command prompt in the list of results.

  (b) at the command prompt, type the following commands:
  powercfg - X-monitor-timeout-ac 0
  powercfg - X-monitor-timeout-dc 0

  Get back to us if the problem persists.

• Services and controller App has stopped working and will be closed

  Anyone know what are the 'Services and controller App' and what he does?

  Seen a few old discriptions problem but no solutions.

  Get the error: "Services and controller App has stopped working and closed."

  Then the computer restarts.  Think that it happens on my home network.  Great idea

  but I would like to know difficulty!  Apparently, one of the members of the network (three

  computers, printers and router) tries to access the laptop where the problem occurs.

  Hi Forney,

  ·         When you get this message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Run the disk check to check for possible errors.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• Satellite M50D-A-10W - display driver has stopped working while gaming

  Hey guys I just bought a toshiba Satellite M50D-A-10W and I have a very annoying problem...
  When I play in dota 2 sometimes I get a massage like: "display driver has stopped working" or answer

  I remember exactly, and the freezing of the game and then screen I need leave the game and reconect. If you can help me guys, I'll be very grateful

  Rare Hi

  This message is certainly created by the installed graphic card driver.
  I can't say for sure why this happens, but I recommend you to reinstall the graphics driver.
  In most cases, this should fix problems with gambling.

  Greetings

• Qosmio G30 - DVD-ROM drive has stopped working

  I have a Qosmio G30 age of 3 years and the DVD - ROM drive has stopped working.

  He still pulls in, but it will not read or burn discs.

  I received a quote of £360 Toshiba to adapt to a new one that seems generous.

  Anyone know where I could get it fixed cheaper than you?
  Or better yet... anyone know where I can I get it fixed?

  David Hutchinson

  Hello
  This is not an answer to your question but can solve the problem if it is the same that I had.
  In my case, the drive tries to spin but it slips. Only the motor shaft rotates and the drive remains at low revolutions that were not even stationary.
  The problem was caused by the fact that the plastic part (black color) of the mechanism which engages the disc (CD or DVD) slips on the
  motor drive, axle and th couldn't do a full rotation or runs at the specified speed.
  The solution is to delete the article in plastic and put a small amount of super glue on the axle and then put it back.

  Where there is a similar issue, I hope that solve you it like I did.

• Satellite M70-340: display driver has stopped working

  HI, I BOUGHT ALL NEW LAPTOP FROM DUBAI THE MONTH LAST. HIS GIVING DISPLAY PROBLEM BEGAN THE IALMRNT5 DISPLAY DRIVER HAS STOPPED WORKING NORMALLY. MUST RESTART TO COMPLETE SYSTEM RESTORE"

  I DID ALSO DRIVE FORMATTED, REINSTALLED PREDRIVERS. BUT IN VAIN.

  ADAPTER IS INTEL! ATI DOES NOT INSTALL!
  DON'T KNOW HOW TO TO THIS TOPIC AND NOW IT JUST BEDS ONLY BLUE POWER LIGHT AND CRASHES ON STARTUP WITH SCREEN WHITE!

  PLEASE SUGGEST...
  CONTACT on [email protected]

  Hello

  If the reinstallation of the system with the recovery CD does not help, then it is not a software problem.
  This means that some hardware component is defective.
  In this case, you need to take your laptop to the service.

  Good bye

• Satellite A60-652: ati2dvag driver has stopped working

  Hello

  Recently, I have a few problems with my graphics. My satellite freezes and goes to a low resolution with a few colors. A message indicates that the ati2dvag driver has stopped working. After that restart of the satellite shows a blue screen and restarts... same thing happens. Only stop and try again after a few minutes made me return to the normal Windows.

  I tried to look for new drivers, but I can't indicate my model (SA60-652)... is this too old model for the updates?

  Toshiba SA60-652
  ATI MOBILITY RADION 7000 IGP
  pilot ati2dvag (6.14.10.6430)
  Windows XP (SP2)
  AVG virus scan
  Hitman Pro anti-spyware
  ATI hydravision installed but never used :-/
  Laptop has recently increased temperature... I'll deal with that after my final thesis (May 8)

  Please can you help me?
  If you can, please be made clear in the instructions, "I don't know much about computers caus... (PEBCAC)

  Thank you!

  Hi Jeroen,

  I think that your problem is related to overheating rather than a defective display driver. The idea here is that it takes several attempts to reboot, giving the unit time to cool.
  I suggest that you try to remove all dust and debris from your radiator and see if it improves the stability of your units.

  You can download a copy of your display driver of: -.

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK

  Kind regards