U2713HM, grilled?

Similar Questions

• Satellite L650 ventilation Grill - 1 Q 5 CPU was not pushed

  Found this post in a locked thread:

  vinh31
  Messages: 16 +.
  Join date: 07/26/10
  Re: Satellite A300-1ID - CPU high temperature +.
  Posted the: August 19, 2010 10:37 am in response to: Xardas in response to: Xardas
  Xardas wrote:

  Hi + vinh31, +.
  + I would recommend blowing air by both parties. Once on the left side and once on the underside where the fan is. +
  + But before you clean, shut down the laptop and remove the battery and the AC adapter / CC. +
  + Thank you for your response, Xardas! +

  + But my laptop A660 model has no holes on the underside where the fan is. I think you know what I mean. Here's the photo of the model L650 of another user, mine is the same: http://img815.imageshack.us/img815/760/dsc009271.jpg+

  + So should blow air into the holes where the RAMs and the motherboard are? I mean other areas with holes: http://img580.imageshack.us/img580/9104/dsc0092111.jpg+

  Same thing here for me the breakdown of the processor grid is closed, I wonder how the cpu can be cooled?

  I first noticed the hot air coming out of the computer and then noticed the closed gate and high temperatures with programs like Everest.
  It is common to the L650 series but on the previous portable satellite the same grid is open:
  [http://www.mcccomputers.com/shop/4678-12558-large/toshiba-satellite-a355-a355d-bottom-case-k000070100-ap05s001600.jpg] *.

  I don't understand the point of a ventilation grid closed... *.

  Post edited by: Kad

  This isn't a ventilation Grill. It is a marker and legal notice.
  You shouldn't be worried that something would be wrong with your laptop ;)

• Satellite L655-158 - no cooling fan pedestal Grill

  Hi all

  Just a quick question, I am repairing a toshiba satellite l655-158 for someone and found the cooling fan grille is blocked.
  I took apart and it is just molded plastic on the other side but the fan is located directly above where the grid should be.
  It doesn't have the grid on the side to evacuate the hot air, but nowhere to slide fresh of air.

  The grill outside, but it looks as if it had not been completed at the factory if that makes sense.

  Also the heat sink is attached to the CPU and short cooling fins but does not connect to the GPU along the way that I find a bit strange considering she will work directly on it but does not connect to it and to not provide the GPU with a cooling.

  So I guess my question is, is this something supposed to toshiba do or maby a mistake at the factory.

  He finds it's the GPU which is the defective part, but looking at these defects is not surprising that the GPU has failed.

  Sorry to babble a bit but I just couldn't find any info on the internet.

  Any info on this would be a great help.

  Thanks in advance.
  Jamie

  Hello Jamie

  To be honest, I can't imagine such errors can occur. You know that every laptop manufacturer produce hundreds of thousands computers laptops and such errors are visible.

  Similar thing is on my Satellite A660. Inside, there is place for cooling but the holes are disabled.
  I just hope you're good in laptop repair and you will be able to fix a friends laptop. ;)

• Cannot get the resolution max X 1 carbon (3443CTO) and Dell U2713HM

  I recently bought this dell monitor and trying to connect via a mini displayport to DVI Dual link adapter to a Dual Link DVI cable to the monitor.

  Can't see an option to increase the resolution after 1080 p.

  Have updated the dispay driver 4000 Intel and install the U2713HM driver.

  Does the x 1 carbon (3443CTO) support 1440 p?

  Just use a miniDP to DP cable. I use this with mine first generation X carbon 1 and U2713hm and it can support this resolution very well.

• How to hide or remove the component prying Grill

  When I lock the components in Ultiboard how can I remove the grill prying?

  Hello

  You can not hide or delete, but you can give it a different color.

  If you choose the same as the background, you won't see more...

  Options-> global preferences-> colors of the tab

  then in the "color item" selection box choose lock color and set your background color

  Success!

• My laptop speaker grilled

  Hi all

  My laptop is a HP Pavilion g6-1220SA and it is old about 2 yearls.

  On Saturday, I was editing some videos and playback, heard a noise grinding, which was followed by a black smoke coming out of the vent to the left speaker.

  I have the PC off, removed the battery and left for a while. He had a disturbing burnt plastic smell.

  Today, I took the time to disassemble the laptop (Kudos to HP for the provision of comprehensive manuals) and it seems to me that the only thing that is not OK is the left speaker, which seems burned.

  My questions on the forum, before taking the machine to a repair center are:

  (1) what are the causes involved burn like that?

  (2) it is likely that something is wrong with your laptop and the burning speaker is a symptom rather than the main problem?

  Photo linked here:

  

  Finally, I see that the speakers are connected by a pair of white wires and reading that is soldered in. If I remove a speaker, I have to get out them both. If I do that, I will always get the 3.5 mm headphone jack sound?

  Thank you!

  @NP_Lima

  Hi all

  I replaced the speakers and the situation seems to have returned to normal.

  Later in the day, I again heard the creaking sound from the left speaker (even I heard before she grilled), all using Windows Movie Maker. I immediately cut the PC.

  I plugged in the headphones and found that the noise was there as well. My conclusion is that something has been the cause of the problem before the sound reached speakers/headphones. I decided to re - install the audio drivers.

  Previously, I had the IDT HD audio drivers. I uninstalled them and when the PC came back on the standard audio driver of Windows 8 is currently in use. I have no problems in the days that followed.

• U2713HM, does not connect to Microsoft Wireless Display Adapter?

  I can't find instructions anywhere to connect this monitor to the graphics card.

  I hooked it up to my USB & HDMI on the bottom of the screen.

  I changed to import HDMI monitor.

  Said the Surface Pro 3 to connect

  He scanned for wireless screens and found nothing

  Pushed the reset button on Microsoft Wireless Display Adapter for 10 seconds

  I don't think that there is power to my USB ports.  Is there something I need to turn on the monitor to make this thing work?

  OK, according to ManuelU2713HM, upstream of U2713HM USB cable must be connected to a USB port on a computer.

  

  So if you have a laptop, connect the cable upstream U2713HM USB. Then test the Microsoft Wireless Adapter Display without the extension. Just use the U2713HM HDMI and USB.

• Cannot get 2560 x 1440 on U2713HM via DVI - D of Latitude E7470

  I have a brand new Dell Latitude E7470 connected to a Dell E-Port Plus Advanced Port Replicator (model PR02X). I have the E-Port Plus, connected to 2 monitors - a brand new P2414H Dell via DisplayPort on Video 1 and a Dell U2713HM via DVI - D on Video 2 (see diagram below). Can I use two screens, but although the E7470 correctly identifies the U2713HM, it offers only as the highest resolution up to 1920 x 1200.
  According to the website of Dell and this forum, the U2713HM supports the complete resolution of 2560 x 1440 via DisplayPort * or * DVI - D (no HDMI), but even if it is connected to DVI - D, I can't put it in 2560 x 1440.
  Why is this and how to get the resolution full 2560 x 1440 via DVI - D link? As it is, it seems blurred and just awful.
  A little background extra. I have a setup of 3 monitor with the U2713HM in the middle and shared between the E7470 laptop and my office. I have my desktop connected to the U2713HM on the DisplayPort, so I can't use the E7470/E-Port Plus to the U2713HM DisplayPort. When I go to the U2713HM on the desktop on the DisplayPort, I get the full 2560 x 1440 resolution and it's fantastic.
  

  OK, no ports DVI on any Dell E-platforms will be higher than 1920 x 1200.

  Maximum resolution P2414H = 1920 x 1080
  Video of P2414H in ports = DP, DVI, VGA

  Maximum resolution of DP and DVI - D U2713HM = 2560 x 1440
  Video of U2713HM in ports = DP, VGA, DVI - D, HDMI

  The installer suggested =
  Docking station video 1 DVI out--> DVI to DVI cable--> DVI P2414H 1920 x 1080
  Video docking station 2 DP on--> cable of DP to DP---> U2713HM DP in 2560 x 1440
  Computer DVI out--> cable DVI to DVI--> U2713HM DVI in 2560 x 1440
  Exit desktop VGA--> VGA cable VGA--> Samsung 275 t VGA 1920 x 1080?

• U2713HM, no validated with DUCCS

  Software, xRite i1 Display Pro and use Dell UltraSharp 1.0.0 color calibration Solution 2012. I am unable to get the screen to be recognized via a USB connection. I tried all USB ports and cables including 'USB 2 USB' and 'USB 2 USB 3.0 Type B '.

  In addition, just to make sure that downstream U2713HM USB ports work, once before the USB cable is connected to the computer, plug a USB mouse into each port downstream U2713HM USB (side two, two down).

• U2713HM, DVI-D/DP 2560 x 1440 60 Hz VGA 2048 x 1152 60 Hz, HDMI 1920 x 1080 60 Hz, 2560 x 1440 30 Hz

  Hello.

  I'be just got my new U2713HM monitor. I have it plugged into my EVGA using the DVI cable and select a resolution of 1920 x 1080 and everything works fine. However, if I try to set a higher resolution the monitor becomes blurred, with white dots everywhere on the screen. What I'm missing here?

  Additional system information:
  64-bit Windows 8
  Latest Nvidia drivers installed

  Happy salvation.

  The reset did not work.

  However, the problem was fixed when I changed the DVI cable with one that came with the monitor.after reading max resolution is only possible with a dual link DVI cable.

  Thanks for your help,

  João

• U2713HM, the functionality Windows 10

  Is there anyone who knows how to get a Dell UltraSharp U2713HM to work on a Windows 10 PC? I can't work properly, strange colors, resolution etc.?

  And if you are using the DVI cable provided in the box of U2713HM? This card should have two DVI ports. Test both using the Dell DVI cable. Based on the article, how the U2713HM made its appearance in the operating system? What resolution you can get?

• U2713HM, cannot display 2560 x 1440 in DVI

  I'm trying hard difficulty but cannot display 2560 x 1440 on Dell U2713HM monitor DVI. I have ASUS Radeon R9270X - DC2T - 4GD5 Graphics Card nothing more than 1080 p, the screen lights up green. Help, please

  Make sure that you test the DL DVI - D cable provided in the box of U2713HM. Also to test both ports DVI on the R9270X. Also, buy a DP to DP cable and test it.

• Power U2713HM problem

  My monitor does not display anything. I'm about to begin to support, but I just want to ask if there is anything else I need to check.

  = What I saw today =.
  It happened not at the same time while I tried to turn it on / unplug it.

  -Display looks completely blackened. Start button / stop lights not on.
  -Only once I saw the button / stop blinked and display blinked too showing symbol DELL. I can say that it is in a regular pattern.

  = What I did today, after that I started to see this =
  -Turn on and off.
  -Unplug the code and reconnect.
  -Put the plug in the other socket. Other electronic devices that use the same plug are working fine.

  = What have I started to see the question =
  Today. I him have not used for the last 3 weeks while I was away from home. I had long successfully using 1.5 months at that time.

  = =
  My House is in the area where it thunder storm occurred several times during my absence. A person living together has been there and said it not there no power failure, except a quick, less than a second, once.

  U2713HM
  Bought in Japan in June 2013

  Thank you.

  My business needs to the branch of Dell in the country where I bought a product, and I did turned out. They said that my case is recognized and send a new one and take the power back. In any case this web site worked good enough for the initial self-diagnosis. Thank you DELL-Babita S.!

• U2713H and U2713HM Displayport

  I ordered two screens refurb U2713HM out of the store, but an injury to the top being a Dell U2713HM & the other a U2713H screen.  Both are good enough work to satisfaction, but with a few quirks.  I use both connected to the ports of my beginning 2013 15 "macbook pro retina two thunderbolt. The u2713HM, while you sleep, seems to appear randomly with a backup mode incoming message from authorities and then immediately falls asleep every two hours.  It is more an annoyance than a real problem.

  The other screen, the U2713H, sometimes gives me enter power saving mode when waking sleep or restart and the only solution seems to turns with the power button and turn it back on.   It is a bit more annoying and discouraging.  I'm curious to know what is my problem.  Is minor incompatibilities with mac or I would benefit from new cables (I don't use expensive white 6 ft monoprice cables, but I do not exactly know what the end in all the 'best' cable is to be used, but I would be happy to order it if there was a final recommendation, or some other configuration monitor I want to toggle.)  I also have the opportunity to spend minidsiplayport on the u2713h displayport cable to a cable minidisplayport minidisplayport if it would somehow /shrug useful.

  Thank you, chaoflux

  Hello Chaoflux,

  I have the same 'enter power saving mode' problem, but after I changed the port settings of your Displayport 1.1 Menu display->-> DisplayPort 1.2 to disable the display settings, the problem never came again.

  Hope that fix your problem also.

  Kind regards

• U2713HM and Latitude E7440

  Hello

  I have a U2713HM connected via an E7440 Latitude docking station. My problem is that the resulution more I got is 1920 x 1080. How can I get 2560 x 1440?

  I tried with the DVI cable to the DVI and Display port to HDMI cable.

  Iraklis

  Finally, I plugged the docking to the screen with on-screen display port cable and it worked well :)