U2713HM and Latitude E7440

Similar Questions

• Readers of latitude E7440 and hard USB3

  Hello. I searched around an answer to this question, but nothing helped. I have one of the new Ultrabooks from Dell; (Latitude E7440) and cannot get my drive hard Portal USB3 to work with USB3 ports. I also have a new Dell E-Port Replicator (dock) with USB3 ports.

  Example of the question:

  • USB3 HARD disk plugged into one of the laptops USB3 ports - powers of the HDD upwards, but Windows does not detect the drive is plugged in hard.
  • USB3 HARD disk plugged into one of the ports USB3 - same symptoms docks.
  • USB3 HARD disk plugged into one of the ports, docks USB2 - HDD works fine but Windows reports that he could run faster (IE speed USB3)
  • USB3 Flash drive plugged into any port USB3 - works fine.
  • All USB2 devices work in all USB ports on the computer laptop and E-Port Replicator.

  Performed troubleshooting:

  • Reinstalled drivers USB3 Hub on the site of Dell
  • Tested my HARD drive on another PC (not Dell) works very well on the USB3 ports.

  Any ideas? I have googled and find people with similar problems, but no final solution.

  Hi ELPAICO,

  You are not sure if you have already found an answer to this? I recently had the same laptop and I must say there is some "energy saving" options which are a pain - for example the way Windows disables Mobile broadband...

  On the question of the USB - I had the same problem, what I have found to solve the problem:

  -Of your Options of selective feeding-> settings-> USB USB suspend-> disable all the

  -Use the USB port on the right side back of the laptop, when you are facing it (dunno why this works well)

  See you soon,.

  IG

• Latitude E7440 - sound does not come with a helmet

  Hello world

  I have a laptop Dell Latitude E7440 8.1 Windows running. I had problems with no sound coming with headphones plugged in the headphone jack (its only comes through the built-in Laptop speakers). I tried several fixes including:

  -Definition of headset as default playback device (my laptop groups speakers and headphones together, is not possible to choose one over the other).

  -Remove the battery, now hold the power for 30 seconds, turn it back on

  -Update Realtek Audio driver

  -Uninstall the Realtek Audio driver (and deletion of files), and then restart the computer for the native audio driver is used.

  I had the most success with the help of the native audio driver (after deleting and uninstalling Realtek). However, when I do this, I have from both headphones and speakers of the laptop. This will work for a day or two, then I'll start to have no sound from the headset again (despite running the native audio driver).

  I don't know if it's a hardware or a software problem. I don't think it's a hardware problem, since I am able to get the headset to some working hours. Are there new ideas or advice? I'm debating getting a USB adapter for my helmet, but I don't know which would solve the problem if it's a software problem.

  Thanks for the help in advance!

  elizabeth1579

  I'm debating getting a USB adapter for my helmet, but I don't know which would solve the problem if it's a software problem.

  The usb sockets are very expensive and me would be worth the risk that it might not work. You could test the hardware failure (or repair the software if it's a software problem) by resetting the laptop back to the factory setting original, but for many people it is worth some money to try and avoid would do that.

  Usually when the headphones are not detected by the driver from Realtek but are when you use the native driver, the solution is to completely remove the software Realtek, the way you did and then install an earlier version of the Realtek driver. However, it is difficult to understand the symptoms of your laptop. Normally if there is the same symptom with pilot of the provider and the native driver, which is strongly evocative of hardware failure because both pilots are not likely to have the same bug at the same time. In your case, but I wouldn't bet on it anyway.

• U2415, Latitude E7440, E-Dock, chaining

  I'm trying to monitor Dell U2415 Garland two since a Dell E-dock with a Dell Latitude E7440 using Dell DisplayPort cables.

  I activated PD 1.2 on the first monitor and disabled on the last. Both monitors appeared on the topology of DisplayPort, but both monitors also show a message saying that no computer, and then they go in the mode 'sleep'. Curiously, the menus for both screens are now unnacessible and I can neither turn on or off 1.2 DP. All I can do is to select the input source. The monitors do not work now if I connect the both as unique display.

  Is something chaining that only is not supported by this brand of monitor Dell or these special Dell monitors would be defective?

  The monitors are not defective and are supported by the DP Garland. Not all E series docking stations will make the wreath of DP. You look at the specifications of your dock docking station see.

  Pier 1
  APR and RPD with USB 3.0 and DP 1.2 update to stay competitive

  Docking station 2
  Adds the possibility of displays of Garland

  Docking station 3
  APR and RPD with USB 3.0 and DP 1.2 update to stay competitive

  Pier 4
  Adds the possibility of displays of Garland

  In your case, the Garland of DP does not, so you must do this on page 29 to unlock.
  "Repeat the steps above to change the parameter back to DP 1.1 if necessary."

  I would like to test without your dock =
  Latitude E7440 back CDM on--> mDP to DP cable--> #1 U2415 DP (DP 1.2) in active
  #1 U2415 DP on--> CDM DP cable--> 2 # U2415 CDM in (1.2 DP disabled)

• Dell Latitude E7440 CPU speed capped after sleep

  My laptop Dell Latitude E7440 provided with Windows 8.1 at the time wherever I bought it. I did not notice this problem until I upgraded to Windows 10.

  Sometimes, when I put the laptop to sleep and resume at a later date, the speed of the CPU is limited to all about 0.78 GHz and switching to High Performance mode won't help. The computer becomes very slow and the only way to solve this reboot.

  I have the latest version of the BIOS installed (A15) and the other drivers are also updated.

  I've seen other threads saying that the problem is to use Dell Power companion but I do not use it. I have 2 power adapters that I use with this laptop, one of them is a Dell 90W Adapter. I'm not sure about the other that I don't have it right now, but an original came with the laptop.

  Any temporary/permanent fix for this? Thank you.

  I solved this problem. Downgrade BIOS A01 and updated step by step each single release - A01 > A02 > A03... > A15. Now, I'm on A15 BIOS and there is no problem with CPU after suspension. I7-4600u, W8.1 x 64.

• First Pro CC 2014.2 crashes on Windows 7, Dell Latitude E7440

  First Pro CC 2014.2 crashes on Windows 7, Dell Latitude E7440, he earlier showed the error message (41) and supposed to restart the program. After trying to restart first a few times to update my system, reinstall creative cloud and first pro CC 2014.2 nothing has changed at all. What else could I do to fix the problem? The previous version before upgrading the first works. Thanks in advance for an answer to help him...

  Go to C: > Windows > System32 and rename the file OpenCL.dll to 'OldOpenCL.dll '.

  Then launch first and let me know if this helps.

  Thank you

  Regalo

• get the longitude and latitude of address

  Hello

  I need to be able to obtain the longitude and the latitude of a place given a text of the address.

  I'd use geocoding Google but, unfortunately their terms of service state that I can't use it unless the information is displayed on their Google maps. Which I will not because I use the built-in Blackberry Maps.

  All I need is the longitude and latitude to calculate the distance between two points.

  I'm looking for a solution which from WebWorks. Y at - it all?

  Solved by using the locator in an extension.

• Longitude and latitude in a web application to generate a point on a google map

  Hi all

  Is it possible to have a field of longitude and latitude in a web application and then ask them to generate a point on a google map?

  Or I should also have fields to address informed the data of web application to have a point on a google map?

  Thank you!

  I solved the problem. Apparently the States must be entered as two-character abbreviations not the actual value (i.e. CA not California).

  -Jeremy

• Problem with Latitude E7440, dock E-series & external monitors

  Hello

  I just upgraded to a to an E7440 E6410. I have two Dell 2007FP monitors connected via DVI on a docking station E-series E-Port Plus. These monitors native resolution is 1600 x 1200 @ 60 Hz and my old E6410 was able to run this very well. The new E7440 refuses however to note that 1600 x 1200 is available and that there is an upper limit of 1280 x 1024 @ 60 and 75 Hz. The Intel graphics properties app shows 1600 x 1200 @ 60 Hz is a mode of the monitor support in the Information Center section, but it won't let me select it in the Display Options section.

  Anyone know if it is a fundamental limitation of the docking on the new connector 7000 series or if I just have something wrong set somewhere? All the drivers are up to date for what is the Dell support site is... The computer is running Windows 7 64 bit if that makes a difference.

  Thanks & best regards,

  Martin

  Sorry - should have come back earlier than my IT guy at work found the "fix." There is a updated driver that is for the E7440 but doesn't show up if you are looking for updates of E7440 (?). In any case, I had the drivers are required to:

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/latitude-E5540-laptop?driverId=PTPX3&osCode=W764&FILEID=3292828809&LanguageCode=en&CategoryID=VI

  While the link is E5540 area, the driver is for the GPU Intel HD4400 located in the E7440 as well. This has fixed the problem on all the E7440s that we have here.

  Martin

• Latitude E7440 display goes black / white after "starting Windows."

  I suspect that he is an out-of-the-box issue (like the power button lights, either), but maybe I'm missing something... This particular unit fired upward, as planned and took our standard image. Somewhere along the way (probably during one of its reboots), I noticed that the screen is out. Turn down and the back didn't solve it, or don't have reset the BIOS. Dell diags run without problem and I can start Windows in Mode safe... but whenever I start Windows normally, it removes after "Starting Windows" flashes by.

  AARRGGHH! I'm kicking myself. It was something I discovered some time ago and since then I forgot... I had stacked them! I have closed an E7440, placed another on top of it and proceeded to the image of this second unit. At some point, I must have changed it so slightly... put it right above all that the devil is in the cover of the display of the unit of the first! (A magnetic field, is my guess). And "in white" is the second display unit... hit the light of the power button, and as a bonus. It worked as planned, when I moved this unit to another place, in order to tap into a flat HDMI. And it is blanked, as soon as I put back it on top of the first E7440. Mystery solved.

• Reference Dell 5550 GSM and Latitude E6410

  Hello

  I think to buy Dell 5550 module for my Latitude E6410. I know that for E6410 module 5540 designed, but more recent 5550 for E6420 has possibility to use HSPA networks + faster.

  So my question is, is - anyone tried this combination of Latitude E6410 and 5550 Dell module? If so, this combination work?

  Thank you

  Vladimir

  Hi, I have a solution to this question MP me.

• How to get a Longtitude and Latitude of mobile?

  I want to get the device latitude and longtitude. I used the location api to get the latitude and longtitude the problem now, I am facing is I could not able to call the method getLocation() inside the button click event. It is throwing error like to call the thread event getLocation() method. Can someone tell me how to solve this problem.

  start a thread to get the location. do things when you get it.

• Double U2713HM and OptiPlex SFF 9020

  We just got a Dell OptiPlex SFF 9020 and a pair of monitors Dell U2713HM. I connected a single monitor for now. The maximum available resolution is 1920 x 1080, rather than the native 2560 x 1440. The monitor is connected to the card (Radeon 8570, I think) who presents what I believe to be a DVI - D port and a DisplayPort. The connection is port DVI - D port DVI - D monitor via DVI - D cable, that I got with the machine. It is clearly labeled as a dual-link cable. How can I fix it?

  I answered my own question, for anyone in a similar situation:

  How TO: Run two 2560 x 1440 monitors on a Dell OptiPlex SFF (Intel + Radeon 8570) 9020

  http://en.community.Dell.com/support-forums/desktop/f/3515/t/19579502.aspx

• Problem with blackberry.location.longitude and latitude

  My widget test first, very basic has a button which, when clicked, should attract the attention of latitude and longitude of the phone, but both values are 0 for some reason any.   I checked on the phone that the GPS works very well and it gives me my lat and long, but I can't seem to get the actual values in my script.  I'm on version 5 of the operating system on a Curve 8900.

  Try changing your element to the following:

  subdomains of http://Development.sinaesthesia.co.uk"="true"/ >

• GPS Longitude and Latitude exporting does not

  It seems to be that a bug somewhere in the way in which Lightroom 4 exporting GPS information.
  The GPS data is very well in the .xmp file and Lightroom 4 (appears on the correct plan)
  but when I export the RAW to a JPG file then the GPS info in file properties (Windows 7)
  reads like a 2 or 3 long integers (for example,-2147483648; etc.). It's may be normal but when
  Import the file into Photoshop Elements 10, GPS info appears by zeros, and when I upload the jpg file
  on flickr, the GPS info is missing.

  Anyone else out there there are the same or similar problem?

  This problem has been fixed in Lightroom 4.1, which is now available.  To download the 4.1 update, go to the Help menu in Lightroom and choose "Check for Updates".

  Thank you

  Ben