U2713HM, no validated with DUCCS

Similar Questions

• Validation with 5610 re-setup error

  Hello.  Take a deep breath and I'm leaving...

  I have a 5610 which worked perfectly with my computer and Windows XP until the computer crashed.  I had to replace almost all of the Interior and therefore had to go back to square one.  The man who fixed the computer reinstalled Windows XP but must have SP3 in the machine.  My old version must have been SP2.  I think so!

  Obviously, I had to reinstall a lot of software to get back up and working again.  No matter how hard I try now I can't get the software of HP Image Zone of re - install.  He tells me when I try there is a validation issue with hpz01.exe and c:\windows\hpoins07.dat Setup.  There is a six-digit number that follows it.   The system has tried several things including a self fix but it keeps telling me it does not work.

  The other interesting thing to note, it is that when I did my twice weekly scan with McAfee stalls hpz files in the drive and won't spend hours.  I have reflected on the disc and you can see no visible fault with it.  It has not been damaged in any way.

  I wonder if anyone would know what the message means and if it is a corrupted how disk download software from the HP support site.

  I'll be very grateful if someone can answer that I am waiting and waitng and waiting to get this bit to scan the computer fixed so that I can submit an article for publication.

  TF.

  P. S.

  The self-test and all document processing to hang in the print queue, and I can print a self-test using the keys on the printer page somehow.  Also I can copy any image that is located on the glass plate, but when I press the scan button it says that there is fault and go to documentation that gives me no will at all.  I don't know about the fax that it is rarely used and there is no way to test except to say that I don't get an error message when I choose this option.

  Phew.  That's all.  Thank you.

  Hi c0rnel

  Doing that, got the T shirt but not printer HP Image Zone!

  I even went as far as unplugging USB and disconnect the system from the wall outlet when the computer was turned off.

  Thanks for advise him.

  I spent all morning on the phone and then McAfee who say that it is not their problem but Windows XP - I think that it's either a Active X that will not allow McAfee or is that SP3 doesn't online.

  Sound like I know what I'm talking about, but not really.

  Thanks Tf.

  Message edited by Technofool on 08/01/2009 09:04

• Why my product key not valid with an installation from another CD as the original?

  I had to reload a fresh install of Win XP on a Toshiba laptop. Given that the previous owner had lost the CD; I took one I had at home a try to install it on my laptop with laptop computer product key stuck under the laptop. but when I try to install said that it is a key of product not valid. This is false because before to format the laptop, it had windows XP installed with this product key and it worked fine. I sort of... ending up with the fact that the installation needs a corresponding product key... Am I wrong? If Yes, what can I do if I want to use my laptop product key and I don't have the Original CD of Installation?

  Thank you!

  You have installed using the installation XP bad disc. XP installation disks are related to the version of the operating system and the type of installation for each particular product key. You need to install either with the recovery media OEM Toshiba (best solution, solved by ordering the recovery disc from Toshiba for a little money - usually less than $30) OR a generic OEM installation disk for the version for installed XP (Home/Pro/Media Center).  If you use a generic OEM installation disc, then you will enter the product key for the thumbnail of the laptop. If you use a generic OEM install disc, then you should go to the Web from Toshiba site and download/install all the drivers and utilities for this laptop model. There is always a ton of them.

  To contact Toshiba support, buy recovery disks, do an install clean/restore factory with these discs. You won't need to enter a product key if you use the restore disks.

  MS - MVP - Elephant Boy computers - don't panic!

• Product key not valid with validation code: 0

  Original title: Invalid product key.

  My laptop crashed with my Windows 7 above. I installed on a Gateway computer. I was looking for solutions to a problem of sound when I found a message that I had one more day to install a new Windows 7 because my product key is not valid. How can I solve this problem? Also, would the computer recognizes only not the speakers, I just installed? I made a copy of my diagnosis below:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - Q6JRG - TR2QK-QPQDM
  The Windows Product Key hash: aPICgyAtJea5IioVaUZAR5YQ358 =
  Windows product ID: 00359-OEM-8704045-57851
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {779644BE-A710-420D-B602-67ABB1D3ECDA} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {779644BE-A710-420D-B602-67ABB1D3ECDA}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-QPQDM00359-OEM-8704045-578513S-1-5-21-2737755360-2567612526-500088126GatewayGT5630EIntel Corp. MQ96510J.15A.0379.2007.0913.1948 20070913000000.000000 + 00091BA3D07018400FA04090409Time(GMT-08:00) Standard Pacific03GATEWASYSTEM 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP
  Activation ID: 586bc076-c93d-429a-afe5-a69fbc644e88
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00174-040-457851-02-1033-7601.0000-2272014
  Installation ID: 005443796190224485841922191776021170654652486246883940
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: QPQDM
  License status: initial grace period
  Time remaining: 40320 minute (s) on (28 day (s))
  Remaining Windows rearm count: 3
  Trust time: 17/08/2014-14:09:55

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 8:15:2014 19:59
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: LgAAAAEAAgABAAEAAQAAAAAAAgABAAEA6GEcrvRrxpgk2jJZeBhC + 9J2Z7DMMQ ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  SYSTEM GATEWA APIC
  SYSTEM GATEWA FACP
  MCFG GATEWA SYSTEM
  WDDT GATEWA SYSTEM
  ASF! SYSTEM GATEWA
  SLIC SYSTEM GATEWA
  SSDT GATEWA CpuPm
  SSDT GATEWA CpuPm
  SSDT GATEWA CpuPm
  SSDT GATEWA CpuPm
  SSDT GATEWA CpuPm

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Error message "your use of media rights have been corrupted or are no longer valid" with Windows Media Player

  Original title: Media Player

  When I download www.BBC.co.ukto TV programs play offline Media player will not let me play with the following error message
  "Your media usage rights were corrupted or are no longer valid. This can happen if you have hardware components in your computer.

  Indeed, I've replaced my CPU with an i7 Ivy bridge. But no where I can find how to fix these media rights.

  Thanks for help
  You must also have no hidden system files to find the correct DRM folder that I seem to have two! I've renamed the new one who showed and delete the other empties. This multimedia player reload the DRM folder with rights new media helped then and now can play the downloaded movies.

• U2713HM, max resolution with a laptop without DVI and DisplayPort?

  This is the type of response to a previous post with the same title.  However, the interface of the forum does not seem to allow a response on older posts, even if they remained unanswered and have customers.  Ho-hum. In any case, I discovered that I can drive the U2713HM using a simple HDMI cable to your laptop using the interface of view nVidia Control Panel (page 'Change resolution') property and setting a custom resolution to match the full 2560 x 1440. The trick is to use the Customize button and create a 'custom resolution' for the progressive 32 bits 2560 x 1440, use 'Automatic' and then drop the (Hz) refresh rate up to about 38 to 41 Hz. To find one that works and then keep trying new in 1 Hz increments until it fails. I'm at the wheel of a laptop Toshiba Qosmio, using its output using a refresh of 41 Hz. frequency something higher and display will not 'lock-in' to its native resolution HDMI (available only) the screen (normally connected by Dual link DVI to a desktop machine). So allow me to use the input on the screen switch to switch between my desktop PC and laptop. Works a treat!

  Just thought I would add that:

  This may be possible with a workaround to other problems of option cable - for example, poor quality or cables of big length - where the main problem is one of the supported by the cable or the type of interface bandwidth.  By lowering the refresh rate, you are lowering the bandwidth requirement.  For old CRT screens, it usually resulted in a significant - not so remarkable gradation with LCD/LED technology!  And don't forget that the eye can integrate cini-film at rates as low as 25 Hz!  Affecting the refresh rate of 30 to 48 Hz on a LCD/LED modern is now a viable solution for the problems of bandwidth of cable. Note, however, that all the problems can be addressed by here: for example, I got a cable from DVI single-link for which no stable frequency could be found (the monitor really need Dual - Link DVI - one with a full set of pines).

• Validations with multiple form provisions on a JSF page

  Hello Experts

  I have a page where I have several sections, each with a PanelFormLayout and a button "submit". My requirement is that when I click on the "submit" button, only this form must be validated. But in my case, the required fields in the other sections are being validated that I don't want.

  Is it possible to achieve it? Please suggest.

  What is available including all forms? High school-forms allows to ignore validation on other forms.

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/40-PPR-subform-169182.PDF

• Master / detail createInsert jumping required attributes validation with part delivery = true

  Hi all

  I use JDev 11.1.1.7.0

  I created master / detail on table emp dept and slipped and fell from CreateInsert in both tables.

  I put partial Submit true for these two buttons.

  Scenario: when I add a record in the master and try to add another rec, mandatory validation fires and it doesnot allow me to add new rec if already a rec void is there.

  But after adding in master, if I add a new rec in child, isn't shooting the validation of required attributes in the parent table. So a new blank record is created is in the child. ]

  If I put part delivery = false for child createInsert, fires of validation.

  Question: in my application, I set partialSubmit = true to CreateInsert child. Although I gave the partial trigger for the main table, validation of required attributes is not get fired for master.

  How to solve this? User should not be able to add a record of the child without filling out the required attributes

  
  

  
  

  < af:form id = "f1" >

  < af:panelStretchLayout id = "PSL1" topHeight = "400px" >

  < f: facet name = "center" >

  < af:panelCollection id = "pc1" >

  < f: facet name = "toolbar" >

  < af:toolbar id = "t4" >

  < af:commandButton actionListener = "#{bindings." CreateInsert1.execute}"text ="CreateInsert1. "

  Disabled = "#{!}" bindings. CreateInsert1.enabled}" id ="cb2" partialSubmit ="true"/ >

  < / af:toolbar >

  < / f: facet >

  < af:table value = "#{bindings." Var EmployeeVO1.collectionModel}"="row ".

  lines = ' #{bindings. " EmployeeVO1.rangeSize}.

  emptyText = "#{bindings." EmployeeVO1.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." EmployeeVO1.rangeSize}' rowBandingInterval = '0 '.

  filterModel = "#{bindings." EmployeeVO1Query.queryDescriptor}.

  queryListener = ' #{bindings. " FilterVisible EmployeeVO1Query.processQuery}"="true"varStatus ="vs. "

  selectedRowKeys = ' #{bindings. " EmployeeVO1.collectionModel.selectedRow}.

  selectionListener = "#{bindings." RowSelection EmployeeVO1.collectionModel.makeCurrent}' = 'single '.

  id = « t2 » "" partialTriggers = ": cb2: pc2:t1: pc2:cb1">

  < / af:table >

  < / af:panelCollection >

  < / f: facet >

  < f: facet = 'top' name >

  < af:panelCollection id = "pc2" >

  < f: facet name = "toolbar" >

  < af:toolbar id = 't3' >

  < af:commandButton actionListener = "#{bindings." CreateInsert.execute text}"="CreateInsert. "

  Disabled = "#{!}" bindings. CreateInsert.enabled}" id ="cb1"partialSubmit ="true"/ >

  < / af:toolbar >

  < / f: facet >

  < af:table value = "#{bindings." Var DepartmentVO1.collectionModel}"="row ".

  lines = ' #{bindings. " DepartmentVO1.rangeSize}.

  emptyText = "#{bindings." DepartmentVO1.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." DepartmentVO1.rangeSize}' rowBandingInterval = '0 '.

  filterModel = "#{bindings." DepartmentVO1Query.queryDescriptor}.

  queryListener = ' #{bindings. " FilterVisible DepartmentVO1Query.processQuery}"="true"varStatus ="vs. "

  selectedRowKeys = ' #{bindings. " DepartmentVO1.collectionModel.selectedRow}.

  selectionListener = "#{bindings." RowSelection DepartmentVO1.collectionModel.makeCurrent}' = 'single '.

  id = « t1 » "" partialTriggers = ": cb1: pc1:cb2">

  < / af:table >

  < / af:panelCollection >

  < / f: facet >

  < / af:panelStretchLayout >

  < / af:form >

  
  

  
  

  Kind regards

  Deepti
  

  This means that it is a bug

  If you put your version Jdev or submit together partial false to get it working in the current version

  and drop a SR with Oracle Support

  Ashish

• Strange behavior of validation with the fields 'user entered - required '.

  I have a situation where I have a form with several 'user entered - required"text fields  Some required fields are pre-populated by a server process before being presented to a user in the workspace.  When the user fills the remaining fields and submits the form (by clicking the button "Done" in the workspace), the of standard validation 'required' message, even if all required fields contain data.

  The shape where I discovered this problem is moderately complex, so I built a form simple and process to try to understand what is happening.  The simple form contains exactly two text fields, both are user entered - required.  A field is filled by a server process when the task of the associated workspace is called, B field must be filled in by the user.  There is no script customized beyond the bridge of form and a Submit button.  It's about as simple as it gets.

  If the field is filled, and then the user fills B field and click on 'Finish', the message appears saying 'at least one required field is empty... "even if the two fields contain data.

  If I return to the form and remove the B field (and redeploy the form and remember the process), to field is pre-filled and the user clicks on 'Finish', no message is displayed and the form is sent.

  As far as I know, the built-in for required fields validation works correctly only if all fields are pre-filled or none of them are pre-filled.

  Can someone explain what is happening?

  EDIT: I forgot to mention, I also created and configured an extract of the data for the simple form.  The data preview only contains a value for the to field.  When displayed in the preview of the Designer tab, everything works as expected.

  After a little work I have a better understanding of what is happening and a solution.  I have scripted several calls to xfa.host.messageBox (...) on different events.  It turns out that the pre-filled fields are not the culprit - they have values as expected.  The problem is with the non-pre-filled fields, and and a subtle behavior of the event model that causes a problem when using the workspace INTERFACE (at least on SS3).  Field values may not be resolved until a field loses focus (for example when a user moves to another field, or click a button).  Form used outside of the workspace, by clicking a "submit" button causes the focus to move to the button, which causes the values to be bound to the fields.

  Solution: Use an indirect Submit on the form button and submit indirect click handler used (in addition to your normal code):

  xfa.host.setFocus(null);
  xfa.resolveNode("[[fully qualified name of the real submit button]]").execEvent("click");
  

  Working space should detect and then make an Indirect button and run the associated click Manager, claiming in turn the form submit true button.

  This is where begins the next bit of fun: there is a bug in the form bridge (at least in the ES3 version) code prevents him from indirect detection submit buttons when you use JavaScript as a language Manager click of the button and

  Here is my hack to solve this issue:

  1. Open the 'ContainerFoundation_JS' script in the Script of Designer Editor
  2. Ignore the warning at the top of the file
  3. Find the named function: isIndirectSubmitEvent (it's on the line 1512 or something)
  4. Change the line that reads:

     • if (script.indexOf(button.name + ".execEvent") != -1) {
       

       TO:

       if (script.indexOf(button.name + ".execEvent") != -1 || script.indexOf(button.name + "\").execEvent") != -1) {
       

  5. Save and deploy the form

  If there is a better way to achieve this, please share.

• Form validation with button Adobe print

  Hi all

  I have a form adobe with validation in the field (javascript) already in place, but I try to add one of the additional options for validation.

  Let me explain my initial validation first: I have 18 fields with their ToolTip names with a ' *' at the end.  All fields not filled in with this marker of the ToolTip will appear in an alert message when the "print" button is selected.

  There are two fields called IException and amount required, but an end user can have additional IExceptions and the corresponding amounts.  That's why I created 5 areas of text for each, but only the first IException and amount are absolutely necessary (and I use a ' *' in their ToolTip).  Now if an end-user has an extra IExceptions ("IException2") and filled with this area, I need to make it compulsory "Amount2" must also be filled.

  Here is my code: [code]

  function validateFields()
  {
  var = 0 flg
  var n = this.numFields
  fArr var = new Array();

  
  for (var i = 0; i < n; i ++)
  {
  var fn = this.getNthFieldName (i);
  var f = this.getField (fn);
  TT = f.userName var

  
  If (tt.indexOf('*')! =-1 & & f.value == f.defaultValue)
  {
  FLG ++;
  fArr [fArr.length] = tt;
  }
  }
  if(FLG>0)
  {
  App.Alert ("there are '+ flg + areas that require a value\n\n' + fArr, 3")
  var IException2 = document.getElementById('IException2').value;
  var Amount2 = document.getElementById('Amount2').value;
  If ((IException2.length >0) & & (Amount2.length == 0))
  {
  App.Alert ("amount is missing")
  }
  on the other
  {
  document. ExceptionForm1.print ();
  }
  }
  }

  validateFields();

  [/ code]

  Currently when one of the fields is NOT filled in, I get my first alert message.  If all the required fields are filled my "print" key don't work.  Also if all required fields are filled and IException2 is also filled but Amount2 is not, I do not receive my second warning message.  So my code works up to 'Var IException2 = document... "and I don't know what is the issue.

  Thanks in advance for your help.

  a and b should be the value of the fields, not only the fields themselves.

  So you can use it either:

  var a = this.getField('IException2').value;

  var b = this.getField('Amount2').value;

  Or this:

  If ((a.value.length >0) & (b.value.length == 0))

• Validation with the possibility of warning?

  Hello
  
  I have a page with the validation of the order of the day and a button.
  When they press save button I would as validations normally (by ensuring that they have entered good data).
  Then, I want to check to see if a line with certain characteristics already exists in the table and cases in it, use a popup to warn users. They can click to continue the save or cancel the registration. If they choose to continue, the process associated with this key page runs. If they indicate to cancel all the stops treatment.
  
  Is it possible with a page-level validation to set up a confirm message?
  If this isn't the case, any suggestions for a solution would be appreciated.
  
  Thank you

  Hi Nann,

  One way to do this would be...

  Suppose your form as the page1 page.

  1 > create new page, tell page 2 and pass all DML processes in page1 page2.
  2 > Create hidden point on page1, say P1_FOUND
  3 > create a new process of PL/SQL page (after submit) in page1 do the following.

  -check for a line with certain features already exist in the table
  -If exists, then assign P1_FOUND to YES to no.
  4 > create an item hidden on page 2, say P2_FOUND and set the source used to "always replace the value that exists in the session state.
  5 > page 1, create submit after branch, which caters to the page2. Here you define the 'P2_FOUND' element with '& P1_FOUND.'
  6 > on page 2, page footer, put the following code JS

  7 > ensure that processes page2 are conditional so that they only run when ASK = 'PROCESS '.
  8 > in page2, create submit after page branching that targets go back to page 1.

  It could be that useful :-)

  See you soon
  Hari

• Feed not validating with iTunes more podcast

  My podcast feed is http://www.debozarko.com/feed/podcast/. It has been working well for the duration of my podcast from 2013.

  I have been using the Powerpress plugin from the beginning without any problem. For some reason, the iTunes store isn't picking up the my last episode (#110). The stream is valid on Feed Validator, but when I check it out in iTunes Connect, the status is "Validation Failed." This explains why it does not appear in the store, but I'm confused as to what could be wrong.

  I downloaded a record fresh and added the new download link on my blog twice, but still the same error.

  Any help is appreciated.

  The exact error in iTunes Connect is, "cannot read your feed. Bad http: 500 result code ".

  Curiously, it appears for the podcast subscribers well. I'm puzzled.

• Guarantee of the disc is still valid with expired warranty Pavilion?

  I have a HP Pavilion g7-1070us laptop with a Toshiba hard drive dead confirmed.  The laptop was purchased in March 2011, at the expiration of the standard warranty in April 2012.

  I checked the warranty of the hard drive by the Web from Toshiba site and they say that it is covered until April 2014.  However, they also say that I have to go through the manufacturer for warranty work, since it is part of the OEM.

  Is this correct?  If so, how can I get a replacement of the hard disk that is under warranty, when the laptop belonged is not?

  Thank you

  Jim

  I guess I was also trying to explain that there is no reason to be angry against HP. They didn't do anything that every other computer manufacturer did not 20 years. It's just the way the world works. Again, sorry.

• Error occurred during the installation of the device, a service in the INF installation section is not valid with Sansa Fuze player

  Media player 11 fails to connect to my sansa fuze player. A second computer find the fuse in sansa without problem. Default media player 11 , I get the following message: error occurred during the instalation of the device, an installtion of service section in the INF is invalid.  I have two players from sansa and both not on this media 11 computer system, but both work on a second computer with media player 9 ? Is the problem, a bad installation of the media 11 on the first computer system, should remove and reinstall media 11 If I delete what is happening in the music on this computer file. Carl L_942

  Hi, Carl L_942,.

  Connect the Sansa Fuze and put into MSC mode. This enabled the majority of users with this problem. Check if it helps you too.

  For more information, see:

  Activation or forcing MSC mode on the Sansa player

  Additional reference on:

  Check and change the device to the master or the MTP USB mode

  The only problem with Media Player 11 and Sansa device is the synchronization of album art to the device.

  For more information, see:

  File Readme for Windows Media Player 11 for Windows XP

  Kind regards

  Divya R - Microsoft technical support.

• Product key not valid with XP Home to Professional upgrade

  I'm upgrading two computers on a customer site of XP Home Edition for XP Professional so that they can participate fully in a windows domain.  The customer has already had two upgrade packs that were an old service pack (SP1 I think).  I can't upgrade using these disks because their home edition SP3.  I have XP Professional SP3 discs that seem Dell OEM but they give an invalid product key error.

  Do I have to get the upgrade of the disk with SP3 on them and if so do you have a source?

  "AlanGroves" wrote in message News: 5ad56eb2-6572-4420-9ff7-54c84666a20c...

  They are two Dell computers and XP Home Edition version that is on the computer is a Dell's OEM version.

  Upgrade doesn't happen even at activation.  It is on a initial screens before the upgrade began that he ask the product key.

  I am typing the correct characters - I've probably got at least 30 Microsoft software installs a month.

  You can try to get answers to my questions.

  Thank you

  You should be able to integrate the SP3 in the disks to upgrade and use.
  You will almost certainly not be able to use any OEM disks to do a clean install of SP3.
  You should be able to use standard OEM System Builder drives to clean - install a SP3 version, using the COA key - if not then enter any key to everything and the default key must be used. Once the installation is complete, use the product key update tool to change the key for the COA key.
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers