Similar Questions

• T520 not resumed after the mode 'sleep'.

  Hello

  When I close the lid of the machine goes into mode 'sleep'. When I open it back it does not. This happened 2 days ago, and before that everything worked very well. I can hear the fans/hdd from when I open the cover, but the statys display dark and the power button flashes. No matter what I press it does not appear from the mode "Eve". I have to press and hold the power button to force the reboot the machine lose all my currently open applications and documents. Any suggestions on what could be the problem and a fix?

  Thank you!

  Thanks for your reply. I solved the problem, but I'm not exactly sure how. I think that it started after I used it on battery until what drain you completely. It was working fine before that. I have lots of update on the system since the Lenovo Update Manager, shut down the computer, took battery and AC and pressed the power button. All assembled again and booted up normally. Now everything works. I can close the lid causing the laptop to go to sleep and he took over when I open it. No more problems at startup.

• Windows 8 do not repair after the laptop broke down (my husband HP G60-125NR)

  Bought the upgrade of software online to win November 7, 2012.  PC has had several problems with HDMI on the laptop.  It would break and then we would get running again.

  Yesterday, my husband went to turn on his laptop and it crashed completely.  I created a bootable cd to download Win 8 we bought.  On reboot, we were happy... but not for long.  The repair feature would not work... no reason given.  It does not restore options, nothing works.  I went several forums to find a solution.
  Finally, we decided to reinstall windows and he said, it would not be installed because the PC is locked?  Frustrated!
  Tried once more and I have a message "Windows didn't prepare the computer to start the next phase of the installation."  To install Windows, restart the installation.
  Error:
  File: \Boot\BCD
  Status: 0xc000000f
  Boot your PC Configuration data is missing or contains errors
  Can anyone help with this?  My husband had some work/Word documents that he wants to save, and alas, he fears that he will lose all.  What choices do we have?  Don't forget, repair, restore and reset functions are all not working is not for us.
  Any help would be appreciated.

  I come home and I tried the option you provided.  Thank you by the way.  I can't get past the first command prompt:

  BcdEdit/export \BCD_Backup C: (where BCD_Backup is the location where you want to reside) and press ENTER.

  (is there a letter or another command I should type after the backup of the word?  When I type in prompt up there, it indicates that the setting is incorrect) command prompts are confusing to me.

  I also shows that several facilities of Windows see examples:

  [1] C:\Windows.old.000\Windows

  [2] C:\Windows.old.001\Windows

  [3] C:\Windows

  At this point, I'm afraid that I won't get it her husband pc so that it starts.  It is a constant reboot and loop, I've been in the bootrec files and he says it has repaired, but in vain.

  See the messages in the refresh, reset and repair options:

  'Refresh' option and the message "the drive where Windows is installed is locked.  Unlock the drive ad try again".  How can I unlock a drive that would not even start?

  'Reset' - impossible to reset your PC.  A required disk partition is missing

  "Repair" - automatic repair couldn't fix your PC.

• Fingerprint reader does not work after the laptop awakens from his sleep.

  Pavilion DV6-6c15nr

  Windows 7 Home Premium

  Fingerprint reader works fine when the computer starts. The drive works fine if I manually lock the system. When the computer enters mode "sleep" through inactivity, then wakes up from his sleep, the fingerprint reader does not work. The player power led does not illuminate, the player does nothing if I drag a registered fingerprint. I must select use authentication information and enter the Windows password. Device Manager says device working properly but it doesn't help. I checked for BIOS, Windows and driver updates but I run in all aspects.

  Hello

  Uninstall the software and current driver for the fingerprint reader.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the latest driver from here.

  Download and install the latest version of the software from here.

• Not closed after the thread.sleep call dialog box

  Hello

  I am display the dialog box and then call thread.sleep (5000), after I called two alerts more dialogue. The problem is when it displays the first dialogue onclick of the button ok its not be closed and its second dialog box open automatically. you have no idea.

  Code example

  try {}

  Dialog.Alert ("HI");

  business logic

  }

  catch

  {

  Thread.Sleep (3000);

  Dialog.Alert ("Hello");

  }

  After the display "Hi", I'm not able to close this dialog box. I tried to put the Thread.sleep inside DMT invlodLater(), no luck

  Any idea?

  Not sure what you mean by there.

  If you want to encode a thread. Sleep (), or waiting for a similar block of code, you must be on the thread of events.  And you can not do without starting another Thread.

  Maybe this will help:

  http://supportforums.BlackBerry.com/T5/Java-development/what-is-the-event-thread/Ta-p/446865

• The update free Windows 10 not resumed after the shutdown of the Pc down. Why?

  I am of the India, I get power outages or network problems normally. I started to download the windows 10 free update, it filled up to 10% (Total 2,936.3 MB in 10%). All of a sudden I faced the power failure and my PC was arrested. After a while, I have on my pc and the update is downloading 0% again. What is the solution of my problem? How take it back? How to continue downloading? If it's only my internet data will be wasted and I will never get free update to windows 10. Please solve my problem.

  https://www.Microsoft.com/en-us/software-download/techbench

  This Web site allows you to download the file to install manually, but the problem is that you must fill it in 24 hours. If you have IDM, you can extend the time limit by a silly workaround, if you want I'll give you that too.

  Answer back for all the questions, hope that helps

  *Bhai Punjab me rehta hai kya?: P

• 6 10 iPhone iOS is not recognized by the laptop Win10Pro

  6 10 iPhone iOS is not recognized by the laptop Win10Pro

  After the upgrade to iOS 10 on my iPhone 6, is is no longer recognized as an external drive by my Win10Pro x 64 laptop on USB 2.0 or 3.0 port. New cable is used to eliminate that as a problem.

  Why is this happening?

  I come to the last iOS 9.x.x?

  Y at - it and the new driver I need to download on my PC?

  I started to automatically backup icloud, but I want to import photos directly to my PC.

  Thank you

  Vicki

  Try opening the iPhone before connecting to Windows. If the film is not empty, then the device should be listed in Windows Explorer. If it still does not show try to restart the computer and the device, and then try again. If it does not show more in iTunes then try iOS device is not showing in iTunes for Windows.

  TT2

• Satellite P300 - 1 H 9 does not start after the update of the BIOS didn't

  I perform an update BIOS, but before the update was completed second shortly after), the laptop has been frozen and is not used to shutdown evenn if hold start buton. So I disconnected the battery and plugin power after that I have reconnceted the plugin from power, then press the power button, it showed a black screen and i heard a
  beep (1 long, 2short)
  CLR CMOS can solve the problem?

  Where the rider is to do the reset?

  P300 - 1 H 9

  Thank you very much...

  Hi mate

  Seems that something was wrong during the BIOS update process.
  Usually the BIOS update should work correctly but the BIOS update is always sensitive technique and something like that can happen.

  Usually the CMOS must be cleared first and then the ROM module must be flashed again. This can be done by an ASP.

  Be in contact with an ASP in local guys help!

• Satellite L555 - 10K - FN keys do not work after the installation of Windows 10

  I installed 10 64-bit Windows (original was Windows 7 64-Bit)

  My FN keys do not work after the installation of Windows 10.

  There is no possibility of a screen-Switch, and the brightness setting and activate Touchpad...
  Do you know any help

  Hello

  I think that your model of laptop is not possible to Win10.
  Check it please https://forum.toshiba.eu/showthread...mation-website

• battery not charged after the power failure

  I have a HP ENVY 14-2050ed Beats Edition Notebook PC

  I was a shortage in the supply cable which caused my HP down.

  After restarting the battery wasn't in charge more. The laptop works fine when it is connected to the (new) cable, but battery does not charge and the laptop does not start with a charged battery.

  I ran all the steps at http://support.hp.com/us-en/document/c00259897 , but he has not found the cause of the problem.

  What type of repair is required to fix this problem?

  Can you recommend a repair center in the Netherlands, or near Rotterdam?

  Thnx

  Onno

  Hello

  I replied to the other thread on this topic:
  http://h30434.www3.HP.com/T5/notebook-hardware/battery-not-charged-after-power-shortage/m-p/4257042

  Thank you

• Does not start after the upgrade to 1.5.

  Does not start after the upgrade to 1.5.  "EdgeAnimate.exe - not found entry Point? -Point procedure entry GetGestureInfo is not found in USER32.dll dynamic link library. »

  All ideas

  No problems in the past with edge since September 2012.

  =============

  Laptop HP Pavilion dv7-2185dx

  Dv7-2185dx product name

  #ABA product number NV023UA

  Microprocessor 2.00 Ghz Intel Centrino 2 Processor Intel Core 2 Quad Q9000 processor technology

  The microprocessor Cache L2 6 MB Cache memory

  6144 MB of memory

  Memory Max 8192MB

  Graphic ATI Mobility Radeon HD 4650 (M96)

  Video memory up to 2815 MB (1024 MB dedicated)

  500 GB (5400 RPM) hard drive

  Multimedia drive LightScribe SuperMulti 8 X DVD±R/RW with Support Double layer

  17.3 "diagonal HD + LED display high-definition HP BrightView Widescreen Display (1600 x 900)

  Fax/Modem high speed 56 k modem

  Network integrated 10/100/1000 Gigabit Ethernet LAN adapter

  Wireless Connectivity Intel WiFi Link 5100AGN

  The Altec Lansing SRS Premium Sound technology with subwoofer

  101 keyboard compatible with the keyboard keys full size numeric keypad with integrated

  Pointing device touch pad with On / Off button and dedicated vertical scroll up/down pad

  PC Card Slots 1 Slot ExpressCard/54 (also supports ExpressCard/34)

  External ports

  5-in-1 Integrated Digital Media Reader for cards Secure Digital, MultiMedia Card, Memory Stick, Memory Stick Pro, or xD Picture Card

  4 universal Serial Bus (USB) 2.0, 4th port shared with eSATA

  2 headphone

  1 microphone input

  HDMI

  1 VGA (15-pin)

  eSATA + USB 2.0

  1 RJ-11 (modem)

  1 RJ - 45 (LAN)

  expansion port for computer 1 cell 3

  1 IEEE 1394

  irewire (4 pin)

  1 consumer IR (remote receiver)

  Other devices HP Webcam with integrated digital microphone

  Dimensions 16.2 "(W) x 10.9" (D) x 1.37 "(min H) / 1.70" (maximum H)

  Weight lbs 7,74

  Housing for Kensington MicroSaver Security lock

  Turn on the password

  Accepts 3rd party locking safety devices

  Software

  Operating system:

  Genuine Windows Vista Home Premium 64-bit with Service Pack 1

  
  

  Hi, people.

  I was able to reproduce the problem here, so the good news is that you're not imagining things.  We are looking in the options right now for you guys, and I will contact you individually by private message to start again at the top.  This being said, please note that our techniques, Vista is an operating system that is not supported, and our team is not stable time on this platform.  We will do the best we can and we will keep you guys, update as to what status is.

  Thank you

  -Elaine

• Screenshots do not work after the IOS10.

  Screenshots do not work after the IOS10. I've tried several apps and the iPhone and iPad.

  Help please.

  < re-titled by host >

  You hold down the sleep/wake button first, the fast, click the Home button?

  Have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to black and restarts with the Apple logo and then release the buttons?

  Good luck!

• Delete buttons do not work after the update of 10.11.16.

  Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

  Any suggestion would be appreciated.

  Greetings, r.fromstouffville!

  It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

  Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

  Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

  How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

  Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

  On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

  Thank you for the communities of Apple Support!

• My apple pencil does not work after the 9.3.4 update.

  My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

  < re-titled by host >

  Greetings RechargeableJam,

  Welcome to the communities of Apple Support!

  I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

  First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

  Best regards.

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software