U3 usb fix the provlem sundisk
DAS nt' work in win7 32 bit, Ant IE 10 kan I fix it?
Hello
Welcome to the Microsoft community.
It seems that you are facing the issue with USB (Universal Serial Bus). It would be great if you can answer the following questions:
1. what exactly is the problem that you are facing on the computer?
2. do you get an error message? If Yes, what is the full and exact error message?
3 have there been any changes made on the computer before the show?
Please provide more information to help you best.
Suggestions for a question on the help forums
http://support.Microsoft.com/kb/555375
Thank you.
Tags: Windows
Similar Questions
-
How to install this update and resolve problems of USB and the touchpad?
I Equium M50 (59th) and am bitten by an update that pulled my touchpad and keyboard. I did the new installation of XP Home and have all updated drivers and everything goes well. The last update, what I can't understand is for
Ana _2005_10_24_V1.2 driver is for, Standard Open HCD USB Host Controller... X 2 .........The update addresses all kinds of questions like I'm having and is an update recommended driver detective, I use offten.
The problem is that it says uninstall the drivers for the i have installed already and when I do it it hits off my USB mouse me leaving no able to install the new. When I reboot it installs those I don't want not reinstalled.
This is the read me, off the coast of the new update and really I don't understand to underdstand what to do... .so here it is?
Driver revision history:
Twinhan VP704A Driver Release Notes
-------------------------------------------------------------------------------
Note:
1. in the event that the system hangs when running with VP704A, please install ULI
Host USB 2.0 in \ULiUSB20Driver driver2. for XP/SP1, please update with the patch in
3. in XP/SP1, update driver will crash the system, while the new facility is ok.
The trick to update driver XP/SP1 is illustrated in the following steps,
a. uninstall the driver
b. disconnect and reconnect the USB device
c. install the driver
4 to support the controller remotely, please launch Agent.exe in \Agent.
Further details at \Agent\Readme.txtKnown issues:
1 multi-instance is not supported
2 remote wakeup is not supported
3. strong use of the processor from analog video/audio capture
4. bad Signal using color YUY2 format IST
5 AV sync if audio captured the wrong filter.
(Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)
6. noise with analog TV and FM Radio
(Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)Driver revision history:
-------------------------------------------------------------------------------
2005-10-24, version: 1.0.2.8
Bugs fixed and new features:
1 is not correctly configured.
-------------------------------------------------------------------------------
2005-10-21, version: 1.0.2.7
Bugs fixed and new features:
1. the firmware version read FLASH OK!
-------------------------------------------------------------------------------
2005-10-14, version: 1.0.2.6
Bugs fixed and new features:
1.MUtil - access driver empty part lower part of screen when IST!
2.MUtil - access HCT pilot check fix crash!
-------------------------------------------------------------------------------
2005-10-07, version: 1.0.2.5
Bugs fixed and new features:
1 tuner turns off when S-Video, Composite.
-------------------------------------------------------------------------------
30/09/2005, version: 1.0.2.4
Bugs fixed and new features:
1.agent.exe update for repeat bug!
2.TI5150 sign up to fix video Format!
-------------------------------------------------------------------------------
2005-09-29, version: 1.0.2.3
Bugs fixed and new features:
1.A pilot of the trial build for multiple access medium. (in the folder "\Multi-Access")
Note: The filter 'Audio device USB' provided by the system does not support mutil-access.
2 reset TI5150 when a new frequency is defined
-------------------------------------------------------------------------------
2005-09-27, version: 1.0.2.2
Bugs fixed and new features:
1. difficulty I2C unstable access on some devices.
-------------------------------------------------------------------------------
2005-09-23, version: 1.0.2.1
Bugs fixed and new features:
1. analog TV becomes sometimes darker.
-------------------------------------------------------------------------------
15/09/2005, version: 1.0.2.0
Bugs fixed and new features:
1. difficulty of installation INF for Windows 2000.
2 FM scan radio policy changed!
-------------------------------------------------------------------------------
13/09/2005, version: 1.0.1.9
Bugs fixed and new features:
1 USB string serial number not visible with USBView, updated firmware required.
2. political analysis of FM radio, return of release if PLLOffset > = 9 x 12. 5 kHz
-------------------------------------------------------------------------------
13/09/2005, version: 1.0.1.8
Bugs fixed and new features:
1. after the passage between AV/D/A several times, video display becomes dark in THDTV 2.61
-------------------------------------------------------------------------------
12/09/2005, version: 1.0.1.7
Bugs fixed and new features:
1. improve the performance of check channel lock status
2 pinnacle INF Fix.
-------------------------------------------------------------------------------
2005-09-09, version: 1.0.1.6
Bugs fixed and new features:
1. Add an audio initialization function.
-------------------------------------------------------------------------------
2005-08-31, version: 1.0.1.5
Bugs fixed and new features:
1 separation of PAL and NTSC resolution mode.
-------------------------------------------------------------------------------
2005-08-30, version: 1.0.1.4
Bugs fixed and new features:
1.AvgTimePerFrame.
2 frame drop.
3 pinnacle inf file HCT chkinf fail.
-------------------------------------------------------------------------------
2005-08-22, version: version 1.0.1.3
Bugs fixed and new features:
1. add remote control interface in digital source filter.
2.A new remote test tool that contains of the source code in \Test_RC.
-------------------------------------------------------------------------------
2005-08-16, version: 1.0.1.2
Bugs fixed and new features:
1. Pinnacel & Twinhan driver & file reorg.
2.VP704A_BDA_Test tool, add a test to the system code.
3. set the standard infrared protocol of "IRSTANDARD", "IRSYSCODECHECK1" registry keys in the INF file.
4 firmware update
-------------------------------------------------------------------------------
2005-08-15, version: 1.0.1.1
Bugs fixed and new features:
1 serial number feature is lost when the audio volume of the TV control
2.RC6A support CIR
(This firmware uses GPIO3 (M9207 pin 80) to decode the RC6 Protocol.
The material must be reworked to connect the M9207 80 pin to the CIR module and the actual
EEPROM must be flashed with \Firmware\M9207.bin)
3 Serieal, MAC address and name of device OEM taken in charge.
Please see for more details on the \Firmware\readme.txt.
4 Ioclt example source code included.
-------------------------------------------------------------------------------
08/08/2005, version: 1.0.0.10
Bugs fixed and new features:
1. increase audio volume analog TV.
-------------------------------------------------------------------------------
04/08/2005, version: 1.0.0.9
Bugs fixed and new features:
1. analog TV Video mode failed.
-------------------------------------------------------------------------------
2005-08-03, version: 1.0.0.8
Bugs fixed and new features:
1.off - centerf frequency scan + / 125Khz
2 difficulty program a copy scanned in MCE.
-------------------------------------------------------------------------------
02/08/2005, version: 1.0.0.7
Bugs fixed and new features:
1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' bug
-------------------------------------------------------------------------------
2005-07-28, version: 1.0.0.6
Bugs fixed and new features:
1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' support
2. improve the stability of I2C communication.
3 unify signaling resistance & quality as a THBda ioctl interface.
4 capture filter lock state control.
-------------------------------------------------------------------------------
2005-07-28, version: 1.0.0.5
Bugs fixed and new features:
1. the same strength & quality signals as VP7046.
2 debug build pilot
-------------------------------------------------------------------------------
2005-07-21, version: 1.0.0.4
Bugs fixed and new features:
1. put the INF update.
-------------------------------------------------------------------------------
2005-07-20, version: 1.0.0.3
Bugs fixed and new features:
1 improve performance in PCM4
2 passage of the analog TV Mode to FM Mode failure
-------------------------------------------------------------------------------
2005-07-04, version: 1.0.0.2
Bugs fixed and new features:
1. production tool FM test OK!
--------------------------------------------And here is the Readme file from the other file in the update?
************************************************** ************************************************
ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME, Windows 2000 and Windows XP
************************************************** ************************************************----------------
INTRODUCTION
----------------This driver supports the host EHCI ULi controller under Windows 98 SE, Windows ME, Windows 2000
and Windows XP.-------------------------
CONTENTS OF THIS DOCUMENT
-------------------------1. installation instructions
2. uninstall instructions----------------------------
1. installation instructions
----------------------------(Windows 98SE & Windows ME)
ULi USB 2.0 Controller has strapped on the system
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will copy the driver files in your Windows system, and then restart your computer.
2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
Host Controller"and install the driver.B.If any ULi USB 2.0 on the system controller
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will copy the driver files to your Windows system, then turn off your computer.
-Fix the ULi USB 2.0 computer controller card and restart your computer.
2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
Host Controller"and install the driver.(Windows 2000)
ULi USB 2.0 Controller has strapped on the system
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will install and load the driver and you do not have to restart the
computer.
B.If any ULi USB 2.0 on the system controller
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will copy the driver in your Windows system files, before turning itself off
your computer.
-Fix the ULi USB 2.0 computer controller card and restart your computer.
2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
Host Controller"and install the driver.(Windows XP)
ULi USB 2.0 Controller has strapped on the system
1. install the driver USB 2.0 ULi
-Run the Setup program.
-Click "NEXT".
-This program will install and load the driver and you do not have to restart the
computer.
-Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
Hub. " Please select "Install the software automatically (recommended)" and then
Click 'Next' to continue the installation.
-This program will install and load the driver and you do not have to restart the
computer.
B.If any ULi USB 2.0 on the system controller
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will copy the driver in your Windows system files, before turning itself off
your computer.
-Fix the ULi USB 2.0 computer controller card and restart your computer.
2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
Host Controller', proceed with the installation.
-Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
Hub. " Please select "Install the software automatically (recommended)" and then
Click 'Next' to continue the installation.Notice:
If you can not configure driver successfully. Please restart your system, then follow
steps to reinstall driver above.------------------------------
2. uninstall instructions
------------------------------1. open the "Control Panel" folder.
2 call the "Add/Remove Programs" icon
3 choose the "ULi USB2.0 Driver" section.
4. click on the "add/delete" button to remove drivers.-----------------------------------
Change list:
-----------------------------------
1.74
1 fix this multi-interface keyboard may not be detected on the USB 2.0 hub.
2. support all USB2.0 Host Controller.
1.73
1 problem on Win98SE, blue screen when you unplug a USB 2.0 Scanner after scanning image.
2 solve problem on Win98SE, blue screen when you unplug a few Scanner USB 2.0 USB 2.0 Hub after scanning image.
3 fix on Win98SE, blue screen when copying of files through the hub of UH-204 SUNBOX.
4 solve problem as wirless lan will disconect when the plug in usb device.1.72
1 fix that system crash when HD USB copy large files.1.71
1. improve the management of power in Win98 / Me.1.70
1. improve the devcie detection function.1.62
1 solve the problem that can not operate a USB HUB USB 2.0 disk when the system resume inactive.1.61
1 solve the problem that some device under USB 2.0 HUB is not found if resumes suspension system.1.60
1. in support of functions power management when a HUB with the USB plug in device
a root HUB.1.57
1. Fix USB with USB 2.0 HUB floppy cannot detect problem.
2. fix audio problem that can not display smooth when peripheral USB connect to the system.
3. fix system cannot detect DVICE USB when the USB device attached to the system in
suspend mode.
4 fix when root USB HUB have a full load, USB HD sometimes
failure of the transaction.1.56
1 fix that device of DVD decoder cannot display correctly.1.55
1. fix OTI USB 2.0 drive hand cannot detect question.
2. attach the USB mouse cannot be used after the resumption of hanging.1.54
1. to improve the safety of the driver.1.53
1. transfer bulk fix may stop if the USB device is connected to the USB 2.0 hub
2 difficulty USB 2.0 mass storage device cannot access after the release of the standby mode if there is an another USB 1.1 existing device1.52
1 correct fault of system pages when accessing the storage of mass Win98SE or scandisk device failure when selecting
automatically fix file system errors
2. fix system may hang on in Win98SE / ME if USB 2.0 cardbus card is pluggedv.1.51
1. to improve the compatibility of USB 2.0 card reader.
2. fix USB IDE devices are not accessible after the release of the standby/hibernation mode.v1.50
1. improve the transfer blockv1.48
1. difficulty of installation of the USB 2.0 LAN driver hangs up
2. attach a USB 1.1 card reader cannot be identified when plugged into the USB 2.0 hub
3. fix some laptops starting hanging Win98SEv1.47
1. improve the performance of bulk transfer.
2. fix the failure of USB 2.0 Preview in bulk webcam.v1.46
1. support USB 2.0 and 1.1 devices isochronous
2. fix system hang up when restarting system if the USB 2.0 host controller is disabled in Win9X / ME
3. fix system hang up when you uninstall the driver if there is USB 2.0 connected under Win2K/XP devices
4. improve the capacity of the device detection in Win9X / MEv1.45
1. fix system hang up when the mode standby ACPI.
2. attach the mouse sometimes does not disappear when it is unplugged.
3. fix the failure of detection of composite devices Win9X and improve device composite Win2K/XPv1.44
1. composite crutch
2 improve the detection of devicesv1.43
1 improve the failure rate of transfer IDE read/write with USB 2.0 to IDE bridge on the platform of PC card
2 difficulty at high peripheral speed detected as full-speed device
3. fix some problem of failure detection USB mouses
4. fix some problem USB 2.0 Hub failure detection
5 difficulty Win98SE crashing if ULi EHCI 1.42 is installedv1.42
1. fix PC Card eject hang up in Win98 / ME
2 difficulty of interruption/resumption hang up in Win98
3 sometimes solve USB 1.1 device cannot be detected if OS starts with USB 2.0 and 1.1 devices plugged
4. fix some failure detection of PC Card USB 1.1 devicesv1.41
1. Add new feature that system can install the driver ahead of the device is plugged in.
2. fix PCMCIA OHCI controller resources affect problem on Windos ME.v1.40
1. support Win9X/ME / 2 K/XP with ULi USB 2.0 driver.
2 fix PCMCIA EHCI controller detection device USB 2.0 problem in Win9X / me.v1.32
1. Fix problem that pilot cannot detect the Microsoft driver in Windows XP
If the path of the OS is not c:\windows.
2. Fix problem that pilot cannot detect the USB 2.0 controller device in a system.v1.31
1. Fix problem that driver cannot install on Windows 2000.v1.30
1 fix than Win9X / shows ME no USB 2.0 hub.
2 solve the problem that hang up when the second entry in Win9X S1 with HID device connected.
3 Fix problem that sometimes when you click on "search the hardware changes.
for PNP ULi USB2.0, controller, the system will inform you the usbehci.sys
file is not found.
4. Fix problem that v1.20 can't find no EHCI controller to install the driver for after different
verison of ULi EHCI controllers devices are connected and disconnected.
5 install the driver support for several features of controller EHCI ULi existing on
system at the same time.
6. determine Win2K/XP shows hub USB root for USB 2.0 hub.v1.20
1. support ULi USB 2.0 for Windows 98SE/ME/2000/XP host controller driver.ULi Coporation. (ULi) web sites:
http://www.Uli.com.tw/ (Taiwan)CAN SOMEONE TREAT ME LIKE A CHILD OF TWO YEARS AND GIVE SOME ADVICE AS TO HOW TO OBTAIN THIS UPDATE.
I'D VERY GRATEFULL AND KIND OF THINK IT would BE BENEFICIAL to a LOT MORE than PEOPLE LIKE I SEE a LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSE to FIX.
It is said above 2 relevant and 1 right ANSWER available...
I'm new here, so anyone could direct me to these answers?
-
When should I reconnect a USB after the resumption of Hibernation.
Hello, I had a doubt:
If I Hibernate Windows when a USB drive is connected, a file copy operation has been active, then when I Hibernate my windows, at what point in the recovery should I reconnect it?
My laptop is set to boot from USB as the default priority. I've changed, but I forgot the BIOS password.
So I neeed your help.
My system is: Microsoft Windows 7.
Your only option would be after Windows has completed the boot process.
You would do well to take it to an authorized service center and get the fixed BIOS password issue... :-)
-
Deliver e tht USB on the computer.
Hello, I have a Windows 7 PC that I built a year and half ago. There is a month that I started having extreme with my USB keyboard and mouse issues when at the most random times the keyboard and mouse would basically freeze and refuse to get anything. I knew that the computer was not frozen because sometimes I was listening to music, or was on Skype, play a game, etc. I would then force shutdown my computer now the power button on my PC so that I can restart the computer where the USB problem would go away.
I tried unplug the keyboard and mouse and try other ports, but once the Frost starts it is a little more for me and I have to restart the computer. I noticed however, that my controller Xbox 360 never (connected via the back of the usb port of the computer) the disconnection problems, but even to start my mouse on the port back does nothing to fix. Literally this problem occurs randomly, sometimes just when I started my computer and I'm waiting for some of my programs start (where I then would be able to actually disconnect the mouse and you reconnect to work), or maybe an hour or a few hours. I never know when the keyboard or mouse hangs, and it makes no sense.
Apparently, my controller driver USB and some drivers were gone, but I was actually able to find the drivers on my site of motherboards to install back (not sure how they were absent). But still, which did not fix the issue. I also used LiveUpdate 6 of MSI to try to update some things, but still no dice. I don't know why I have these problems and even try to find the drivers for my keyboard and mouse logitech has failed.
My config is as such:
Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130318) - 1533
Language: English (regional setting: English)
Manufacturer: MSI
System model: MS-7672
BIOS: BIOS Date: 31/03/11 17:04:02 worm: 04.06.04
Processor: Intel Core i5 - 2500K CPU @ 3.30 GHz (4 CPUs), ~3.3GHz
Memory: RAM 8192MB
Available OS memory: 8160 MB RAM
Page file: 3134MB used, 13183 MB of available space
Windows Dir: C:\Windows
DirectX version: DirectX 11
DX setup parameters: not found
User DPI setting: 120 DPI (125%)
System DPI setting: 96 DPI (100%)
DWM DPI Scaling: disabled
DxDiag Version: 6.01.7601.17514 32 bit Unicode------------
DxDiag Notes
------------
Display 1 tab: No problems found.
Sound tab 1: No problems found.
2 Audio tab: No problems found.
3 Audio tab: No problems found.
Input tab: no problems found.--------------------
DirectX Debug levels
--------------------
Direct3D: 0/4 (detail)
DirectDraw: 0/4 (detail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (detail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (detail)---------------
Display devices
---------------
Card name: NVIDIA GeForce GTX 650
Manufacturer: NVIDIA
Track type: GeForce GTX 650
DAC type: Integrated RAMDAC
The device key: Enum\PCI\VEN_10DE & DEV_0FC6 & SUBSYS_0974196E & REV_A1
Memory display: 4042 MB
Dedicated memory: 1994 MB
Shared memory: 2047 MB
Current mode: 1600 x 900 (32 bit) (60 Hz)
Name of the monitor: generic PnP monitor
Monitor model: G205HV
Monitor ID: ACR0223
Native mode: 1600 x 900 (p) (59,978 Hz)
Output type: HD15
Driver name: nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um
The driver file version: 9.18.0013.1422 (English)
Driver version: 9.18.13.1422
DDI version: 11
: Model WDDM 1.1 driver
Driver attributes: Final retail
Driver Date/size: 14/03/2013 22:53:06, 17990800 bytes
WHQL Logo would be: n/a
WHQL Date stamp: n/a
The instrument identifier: {D7B71E3E-4C86-11CF-507F-79291CC2C435}
Vendor ID: 0x10DE
Device ID: 0x0FC6
SubSys ID: 0x0974196E
Revision ID: 0x00A1
Strong name of the driver: oem32.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section062:9.18.13.1422:pci\ven_10de&dev_0fc6
The driver rating: 00E02001
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C
Deinterlace caps: {6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
D3d9 Overlay: support
DXVA-HD: support
DDraw status: enabled
D3D status: enabled
AGP status: enabled-------------
Sound Devices
-------------
Description: Speakers (Realtek High Definition Audio)
Default audio playback: Yes
Default voice playback: Yes
Hardware ID: HDAUDIO\FUNC_01 & VEN_10EC & DEV_0892 & SUBSYS_14627672 & REV_1003
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver name: RTKVHD64.sys
Driver version: 6.00.0001.6316 (English)
Driver attributes: Final retail
WHQL Logo would be: n/a
Date and size: 24/02/2011-03:21:10, 2753512 bytes
Other files:
Driver provider: Realtek Semiconductor Corp.
HW Accel level: basic
Cap flags: 0x0
Min/Max sample rate: 0, 0
Static/Strm HW Mix beef: 0, 0
Static/Strm HW 3D steers: 0, 0
HW memory: 0
Management of the voice: No.
Listen/Src/EAX (TM) 2.0: No, no
Listen/Src/I3DL2 (TM): No, no
Sensaura (TM) ZoomFX (tm): No.Description: Realtek Digital Output (Realtek High Definition Audio)
Default audio playback: No.
Default voice playback: no
Hardware ID: HDAUDIO\FUNC_01 & VEN_10EC & DEV_0892 & SUBSYS_14627672 & REV_1003
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver name: RTKVHD64.sys
Driver version: 6.00.0001.6316 (English)
Driver attributes: Final retail
WHQL Logo would be: n/a
Date and size: 24/02/2011-03:21:10, 2753512 bytes
Other files:
Driver provider: Realtek Semiconductor Corp.
HW Accel level: basic
Cap flags: 0x0
Min/Max sample rate: 0, 0
Static/Strm HW Mix beef: 0, 0
Static/Strm HW 3D steers: 0, 0
HW memory: 0
Management of the voice: No.
Listen/Src/EAX (TM) 2.0: No, no
Listen/Src/I3DL2 (TM): No, no
Sensaura (TM) ZoomFX (tm): No.Description: Realtek Digital Output (Optical) (Realtek High Definition Audio)
Default audio playback: No.
Default voice playback: no
Hardware ID: HDAUDIO\FUNC_01 & VEN_10EC & DEV_0892 & SUBSYS_14627672 & REV_1003
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver name: RTKVHD64.sys
Driver version: 6.00.0001.6316 (English)
Driver attributes: Final retail
WHQL Logo would be: n/a
Date and size: 24/02/2011-03:21:10, 2753512 bytes
Other files:
Driver provider: Realtek Semiconductor Corp.
HW Accel level: basic
Cap flags: 0x0
Min/Max sample rate: 0, 0
Static/Strm HW Mix beef: 0, 0
Static/Strm HW 3D steers: 0, 0
HW memory: 0
Management of the voice: No.
Listen/Src/EAX (TM) 2.0: No, no
Listen/Src/I3DL2 (TM): No, no
Sensaura (TM) ZoomFX (tm): No.---------------------
Sound Capture devices
---------------------
-------------------
DirectInput devices
-------------------
Device name: mouse
Joint: 1
Controller ID: n/a
Vendor/product ID: n/a
FF driver: n/aDevice name: keyboard
Joint: 1
Controller ID: n/a
Vendor/product ID: n/a
FF driver: n/aDevice name: Bluetooth HID Device remote control
Joint: 1
Controller ID: 0 x 0
Suppliers of products/ID: 0xFFFE, 0xFFFE
FF driver: n/aPoll w / Interrupt: No.
-----------
USB devices
-----------
+ USB root hub
| Suppliers of products/ID: 0 x 8086, 0x1C2D
| Matching Device ID: usb\root_hub20
| Service: usbhub
|
+ - + Generic USB hub
| | Suppliers of products/ID: 8087 x 0, 0 x 0024
| | Location: Port_ #0001.Hub_ #0001
| | Matching Device ID: usb\class_09
| | Service: usbhub
| |
| + - + Generic USB hub
| | | Suppliers of products/ID: 0x0A5C, 0 x 4500
| | | Location: Port_ #0006.Hub_ #0003
| | | Matching Device ID: usb\class_09
| | | Service: usbhub
| | |
| | + - + USB Human Interface Device
| | | | Suppliers of products/ID: 0x0A5C, 0 x 4502
| | | | Location: Port_ #0001.Hub_ #0005
| | | | Matching device ID: usb\vid_0a5c & pid_4502
| | | | Service: HidUsb
| | | |
| | | + - + HID keyboard device
| | | | | Suppliers of products/ID: 0x0A5C, 0 x 4502
| | | | | Matching Device ID: hid_device_system_keyboard
| | | | | Service: kbdhid
| | | |
| | + - + USB Human Interface Device
| | | | Suppliers of products/ID: 0x0A5C, 0 x 4503
| | | | Location: Port_ #0002.Hub_ #0005
| | | | Matching device ID: usb\vid_0a5c & pid_4503
| | | | Service: HidUsb
| | | |
| | | + - + Consumer control device meets the HID
| | | | | Suppliers of products/ID: 0x0A5C, 0 x 4503
| | | | | Matching device ID: hid_device_up:000c_u:0001
| | | | |
| | | + - + HID-compliant mouse
| | | | | Suppliers of products/ID: 0x0A5C, 0 x 4503
| | | | | Matching Device ID: hid_device_system_mouse
| | | | | Service: me----------------
Gameport devices
----------------------------
PS/2 devices
------------
+ PS/2 standard keyboard
| Matching Device ID: * pnp0303
| Service: i8042prt
|
+ Server terminal keyboard driver
| Matching Device ID: root\rdp_kbd
| High filters: kbdclass
| Service: TermDD
|
+ HID-compliant mouse
| Suppliers of products/ID: 0x046D, 0xC064
| Matching Device ID: hid_device_system_mouse
| Service: me
|
+ Terminal Server mouse driver
| Matching Device ID: root\rdp_mou
| High filters: mouclass
| Service: TermDD------------------------
Disk & CD-ROM/DVD-ROM readers
------------------------
Drive: C:
Free space: 906,3 GB
Total space: 1430,7 GB
File system: NTFS
Model: ST1500DL003-9VT16L ATA Device--------------
System devices
--------------
Name: High Definition Audio Controller
Device ID: PCI VEN_8086 & DEV_1C20 & SUBSYS_76721462 & REV_05\3 & 11583659 & 0 & D8
Pilot: s/oName: 2nd generation family of processors Intel (r) Core PCI Express controller - 0101
Device ID: PCI VEN_8086 & DEV_0101 & SUBSYS_76721462 & REV_09\3 & 11583659 & 0 & 08
Pilot: s/oName: High Definition Audio Controller
Device ID: PCI\VEN_10DE & DEV_0E1B & SUBSYS_0974196E & REV_A1\4 & 744803D & 0 & 0108
Pilot: s/oName: Intel (r) 6 Series/C200 Series Chipset Family PCI Express Root Port 8 - 1C1E
Device ID: PCI VEN_8086 & DEV_1C1E & SUBSYS_76721462 & REV_B5\3 & 11583659 & 0 & E7
Pilot: s/oName: 2nd generation family of processors Intel (r) Core DRAM Controller - 0100
Device ID: PCI VEN_8086 & DEV_0100 & SUBSYS_76721462 & REV_09\3 & 11583659 & 0 & 00
Pilot: s/oName: (USB) Universal Serial Bus controller
Device ID: PCI\VEN_1033 & DEV_0194 & SUBSYS_76721462 & REV_04\4 & E232A40 & 0 & 00E2
Pilot: s/oName: Intel(r) 82801 PCI Bridge - 244
Device ID: PCI VEN_8086 & DEV_244E & SUBSYS_76721462 & REV_B5\3 & 11583659 & 0 & E5
Pilot: s/oName: Intel (r) 6 Series/C200 Series Chipset Family PCI Express Root Port 7 - 1C1C
Device ID: PCI VEN_8086 & DEV_1C1C & SUBSYS_76721462 & REV_B5\3 & 11583659 & 0 & E6
Pilot: s/oName: Marvell 91xx SATA 6 G controller
Device ID: PCI\VEN_1B4B & DEV_91A3 & SUBSYS_76721462 & REV_11\4 & 75E7271 & 0 & 00E7
Pilot: s/oName: (USB) Universal Serial Bus controller
Device ID: PCI\VEN_1033 & DEV_0194 & SUBSYS_76721462 & REV_04\4 & 838EDEF & 0 & 00E6
Pilot: s/oName: Intel P67 Express Chipset Family LPC Interface Controller - 1 46
Device ID: PCI VEN_8086 & DEV_1C46 & SUBSYS_76721462 & REV_05\3 & 11583659 & 0 & F8
Pilot: s/oName: Intel (r) 6 Series/C200 Series Chipset Family PCI Express Root Port 3 - 1 c 14
Device ID: PCI VEN_8086 & DEV_1C14 & SUBSYS_76721462 & REV_B5\3 & 11583659 & 0 & E2
Pilot: s/oName: Bridge PCI to PCI standard PCI
Device ID: PCI\VEN_1B21 & DEV_1080 & SUBSYS_76721462 & REV_01\4 & 3B50FB95 & 0 & 00E5
Pilot: s/oName: Intel(r) Management Engine Interface
Device ID: PCI VEN_8086 & DEV_1C3A & SUBSYS_76721462 & REV_04\3 & 11583659 & 0 & B0
Pilot: s/oName: Intel (r) 6 Series/C200 Series Chipset Family PCI Express Root Port 2 - 1 c 12
Device ID: PCI VEN_8086 & DEV_1C12 & SUBSYS_76721462 & REV_B5\3 & 11583659 & 0 & E1
Pilot: s/oName: VIA 1394 compatible OHCI Host Controller
Device ID: PCI\VEN_1106 & DEV_3044 & SUBSYS_672D1462 & REV_C0\5 & 27A53E0E & 0 & 1000E5
Pilot: s/oName: Family of chipsets Intel (r) 6 Series/C200 Series USB Enhanced Host Controller - 1C2D
Device ID: PCI VEN_8086 & DEV_1C2D & SUBSYS_76721462 & REV_05\3 & 11583659 & 0 & D0
Pilot: s/oName: Intel (r) 6 Series/C200 Series Chipset Family PCI Express Root Port 1 - 1 c 10
Device ID: PCI VEN_8086 & DEV_1C10 & SUBSYS_76721462 & REV_B5\3 & 11583659 & 0 & E0
Pilot: s/oName: Realtek PCIe GBE Family Controller #2
Device ID: PCI\VEN_10EC & DEV_8168 & SUBSYS_76721462 & REV_06\4 & 1743620 & 0 & 00E1
Pilot: s/oName: Family of chipsets Intel (r) 6 Series / C200 Series USB Enhanced Host Controller - 1 26
Device ID: PCI VEN_8086 & DEV_1C26 & SUBSYS_76721462 & REV_05\3 & 11583659 & 0 & E8
Pilot: s/oName: Intel (r) 6 Series/C200 Series Chipset Family 2 port Serial ATA Storage Controller - 1 08
Device ID: PCI VEN_8086 & DEV_1C08 & SUBSYS_76721462 & REV_05\3 & 11583659 & 0 & FD
Pilot: s/oName: Realtek PCIe GBE Family Controller
Device ID: PCI\VEN_10EC & DEV_8168 & SUBSYS_76721462 & REV_06\4 & B 110, 9680 & 0 & 00E0
Pilot: s/oName: Intel (r) 6 Series / C200 Series Chipset Family SMBus Controller - 1 22
Device ID: PCI VEN_8086 & DEV_1C22 & SUBSYS_76721462 & REV_05\3 & 11583659 & 0 & FB
Pilot: s/oName: Intel (r) 6 Series/C200 Series Chipset Family 4 port Serial ATA Storage Controller - 1 00
Device ID: PCI VEN_8086 & DEV_1C00 & SUBSYS_76721462 & REV_05\3 & 11583659 & 0 & FA
Pilot: s/oName: NVIDIA GeForce GTX 650
Device ID: PCI\VEN_10DE & DEV_0FC6 & SUBSYS_0974196E & REV_A1\4 & 744803D & 0 & 0008
Pilot: s/o------------------
DirectShow filters
------------------DirectShow filters:
WMAudio Decoder DMO, 0 x 00800800, 1, 1, WMADMOD. DLL, 6.01.7601.17514
WMAPro over S/PDIF DMO, 0 x 00600800, 1, 1, WMADMOD. DLL, 6.01.7601.17514
WMSpeech Decoder DMO, 0 x 00600800, 1, 1, WMSPDMOD. DLL, 6.01.7601.17514
MP3 DMO, 0 x 00600800, 1, 1, mp3dmod.dll, 6.01.7600.16385 decoder
Mpeg4s decoder DMO, 0 x 00800001, 1, 1, mp4sdecd.dll, 6.01.7600.16385
Decoder WMV DMO, 0 x 00600800, 1 screen, 1, wmvsdecd.dll, 6.01.7601.17514
Decoder DMO WMVideo, 0 x 00800001, 1, 1, wmvdecod.dll, 6.01.7601.17514
Mpeg43 decoder DMO, 0 x 00800001, 1, 1, mp43decd.dll, 6.01.7600.16385
MPEG4 Decoder DMO, 0 x 00800001, 1, 1, mpg4decd.dll, 6.01.7600.16385
Decoder, 0 x 00600000, 1, 1, Xiph.Org Theora dsfTheoraDecoder.dll,.
Xiph.Org Vorbis Decoder, 0 00600000, 1, 1, x dsfVorbisDecoder.dll,.
DV Muxer, 0x00400000, 0, 0, qdv.dll, 6.06.7601.17514
Converter, 0 x 00400001, 1, 1, quartz.dll, 6.06.7601.17713 color space
Reader, 0x00400000, 0, 0, qasf.dll, WM ASF 12.00.7601.17514
Filter, 0 x 00200000, 0, 1, wmpsrcwp.dll, 12.00.7601.17514 screenshot
AVI Splitter, 0 x 00600000, 1, 1, quartz.dll, 6.06.7601.17713
VGA 16 color Ditherer, 0 x 00400000, 1, 1, quartz.dll, 6.06.7601.17713
SBE2MediaTypeProfile, 0 x 00200000, 0, 0, SBE.dll, 6.06.7601.17528
Xiph.Org Ogg Muxer, 00200000 x 0, 1, 0, dsfOggMux.dll,
Microsoft DTV - DVD video Decoder, 0x005fffff, 2, 4, msmpeg2vdec.dll, 12.00.9200.16426
AC3 parser Filter, 0 x 00600000, 1, 1, mpg2splt.ax, 6.06.7601.17528
StreamBufferSink, 0 x 00200000, 0, 0, sbe.dll, 6.06.7601.17528
MJPEG Decompressor, 0 x 00600000, 1, 1, quartz.dll, 6.06.7601.17713
MPEG-I Stream Splitter, 0 x 00600000, 1, 2, quartz.dll, 6.06.7601.17713
Xiph.Org FLAC Decoder, 0 00600000, 1, 1, x dsfFLACDecoder.dll,.
Parser, 0 x 00400000, 1, 1, quartz.dll, 6.06.7601.17713 SAMI (CC)
The IST Codec, 0 x 00600000, 1, 4, VBICodec.ax, 6.06.7601.17514
MPEG-2 Splitter, 0x005fffff, 1, 0, mpg2splt.ax, 6.06.7601.17528
Filter, 0 x 00200000, 2, 5, cca.dll, 6.06.7601.17514 analysis of closed captioning
SBE2FileScan, 0 x 00200000, 0, 0, SBE.dll, 6.06.7601.17528
Microsoft MPEG-2 video encoding, 0 x 00200000, 1, 1, msmpeg2enc.dll, 6.01.7601.17514
Renderer, 0 x 00800001, 1, 0, quartz.dll, 6.06.7601.17713 Script command internal
MPEG Audio Decoder, 0 x 03680001, 1, 1, quartz.dll, 6.06.7601.17713
DV Splitter, 0 x 00600000, 1, 2, qdv.dll, 6.06.7601.17514
Video Mixing Renderer 9 0 x 00200000, 1, 0, quartz.dll, 6.06.7601.17713
Encode, 0 x 00200000, 1, 1, dsfTheoraEncoder.dll to Xiph.Org Theora.
Xiph.Org Vorbis Encoder, 0 x 00200000, 1, 1, dsfVorbisEncoder.dll,.
Microsoft MPEG - 2 encode, 0 x 00200000, 2, 1, msmpeg2enc.dll, 6.01.7601.17514
ACM Wrapper, 0 x 00600000, 1, 1, quartz.dll, 6.06.7601.17713
Video Renderer, 0 x 00800001, 1, 0, quartz.dll, 6.06.7601.17713
Video stream MPEG - 2 Analyzer, 0 x 00200000, 0, 0, sbe.dll, 6.06.7601.17528
Xiph.Org Native FLAC Decoder, 0 x 00600000, 0, 1, dsfNativeFLACSource.dll,.
Line 21 Decoder, 0 x 00600000, 1, 1, qdvd.dll, 6.06.7601.17713
Port video Manager, 0 x 00600000, 2, 1, quartz.dll, 6.06.7601.17713
Xiph.Org Speex Encoder, 0 x 00200000, 1, 1, dsfSpeexEncoder.dll,.
Video Renderer, 0x00400000, 1, 0, quartz.dll, 6.06.7601.17713
Xiph.Org Speex Decoder, 0 00600000, 1, 1, x dsfSpeexDecoder.dll,.
Xiph.Org FLAC Encoder, 0 x 00200000, 1, 1, dsfFLACEncoder.dll,.
Decoder, 0 x 00200000 VPS, 0, 0, WSTPager.ax, 6.06.7601.17514
Writer, 0x00400000, 0, 0, qasf.dll, WM ASF 12.00.7601.17514
Allocator, 0 x 00600000, 1, 1, vbisurf.ax, 6.01.7601.17514 Surface of VBI
File writer, 00200000 x 0, 1, 0, qcap.dll, 6.06.7601.17514
iTV Sink, 0 x 00600000, 1, 0, itvdata.dll, 6.06.7601.17514 data
iTV to Capture data filter 0 x 00600000, 1, 1, itvdata.dll, 6.06.7601.17514
DVD Navigator, 0 x 00200000, 0, 3, qdvd.dll, 6.06.7601.17713
Mixer2, 0 x 00200000, 1, 1, qdvd.dll, 6.06.7601.17713 overlay
AVI Draw, 0 x 00600064, 9, 1, quartz.dll, 6.06.7601.17713
RDP DShow Redirection Filter, 0xffffffff, 1, 0, DShowRdpFilter.dll,
Microsoft MPEG-2 Audio Encoder, 0 x 00200000, 1, 1, msmpeg2enc.dll, 6.01.7601.17514
Pager, 0 x 00200000, 1, 1, WSTPager.ax, 6.06.7601.17514 WST
MPEG2 demux, 0 x 00600000, 1, 1, mpg2splt.ax, 6.06.7601.17528
Decoder, 0 x 00800000, 1, 1, qdv.dll, 6.06.7601.17514 DV video
SampleGrabber, 0 x 00200000, 1, 1, qedit.dll, 6.06.7601.17514
Renderer, 00200000 x 0, 1, 0, qedit.dll, 6.06.7601.17514 null
Tables, 0x005fffff, 1, 0, mpeg2data.ax, 6.06.7601.17514 and MPEG - 2 Sections
Microsoft AC3 Encoder, 0 x 00200000, 1, 1, msac3enc.dll, 6.01.7601.17514
Xiph.Org Ogg Demuxer, 0 x 00600000, 1, 1, dsfOggDemux2.dll,.
StreamBufferSource, 0 x 00200000, 0, 0, sbe.dll, 6.06.7601.17528
Smart Tee, 0 x 00200000, 1, 2, qcap.dll, 6.06.7601.17514
Mix, 0 x 00200000, 0, 0, qdvd.dll, 6.06.7601.17713 overlay
AVI Decompressor, 0 x 00600000, 1, 1, quartz.dll, 6.06.7601.17713
Source, 0 x 00400000, 0, 2, quartz.dll, 6.06.7601.17713 AVI/WAV file
Parser, 0 x 00400000, 1, 1, quartz.dll, 6.06.7601.17713 wave
Parser, 0 x 00400000, 1, 1, quartz.dll, 6.06.7601.17713 noon
Multi-fichier Parser, 0 x 00400000, 1, 1, quartz.dll, 6.06.7601.17713
File stream renderer, 0x00400000, 1, 1, quartz.dll, 6.06.7601.17713
Microsoft DTV - DVD Audio Decoder, 0x005fffff, 1, 1, msmpeg2adec.dll, 6.01.7140.0000
StreamBufferSink2, 0 x 00200000, 0, 0, sbe.dll, 6.06.7601.17528
AVI Mux, 00200000 x 0, 1, 0, qcap.dll, 6.06.7601.17514
Line 21 decoder 2, 0 x 00600002, 1, 1, quartz.dll, 6.06.7601.17713
File Source (Async.), 0 x 00400000, 0, 1, quartz.dll, 6.06.7601.17713
File Source (URL), 0 x 00400000, 0, 1, quartz.dll, 6.06.7601.17713
WebM Muxer Filter, 0 x 00200000, 2, 1, webmmux.dll, 0.09.0012.0000
WebM VP8 Decoder Filter, 0 x 00600000, 1, 1, vp8decoder.dll, 0.09.0012.0000
Filter, 0 x 00200000, 1, 1, vp8encoder.dll, 0.09.0012.0000 WebM VP8 encoder
WebM Splitter Filter, 0 x 00600000, 1, 1, webmsplit.dll, 0.09.0012.0000
Infinite pin Tee Filter, 0 x 00200000, 1, 1, qcap.dll, 6.06.7601.17514
Renderer, 00200000 x 0, 1, 0, evr.dll, 6.01.7601.17514 improved video
BDA MPEG2 Transport Information Filter, 0 x 00200000, 2, 0, psisrndr.ax, 6.06.7601.17669
Decoder, 0 x 40000001, 1, 1, quartz.dll, 6.06.7601.17713 MPEG videoWDM Streaming Tee/Splitter devices:
Converter, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7601.17514 tee/sink - to the-wellsVideo compressors:
WMVideo8 encoder DMO, 0 x 00600800, 1, 1, wmvxencd.dll, 6.01.7600.16385
WMVideo9 encoder DMO, 0 x 00600800, 1, 1, wmvencod.dll, 6.01.7600.16385
Encoder 9 MSScreen DMO, 0 x 00600800, 1, 1, wmvsencd.dll, 6.01.7600.16385
Encode, 0 x 00200000, 0, 0, qdv.dll, 6.06.7601.17514 DV video
MJPEG Compressor, 0 x 00200000, 0, 0, quartz.dll, 6.06.7601.17713
Encode, 0 x 00200000, 1, 1, dsfTheoraEncoder.dll to Xiph.Org Theora.
Filter, 0 x 00200000, 1, 1, vp8encoder.dll, 0.09.0012.0000 WebM VP8 encoder
Cinepak Codec by Radius, 0 x 00200000, 1, 1, qcap.dll, 6.06.7601.17514
Intel IYUV codec, 0 x 00200000, 1, 1, qcap.dll, 6.06.7601.17514
Intel IYUV codec, 0 x 00200000, 1, 1, qcap.dll, 6.06.7601.17514
Microsoft RLE, 0 x 00200000, 1, 1, qcap.dll, 6.06.7601.17514
Microsoft Video 1, 0 x 00200000, 1, 1, qcap.dll, 6.06.7601.17514Audio compressors:
WM Encoder DMO speech, 0 00600800, 1, 1, x WMSPDMOE. DLL, 6.01.7600.16385
WMAudio encoder DMO, 0 x 00600800, 1, 1, WMADMOE. DLL, 6.01.7600.16385
Xiph.Org Vorbis Encoder, 0 x 00200000, 1, 1, dsfVorbisEncoder.dll,.
Xiph.Org Speex Encoder, 0 x 00200000, 1, 1, dsfSpeexEncoder.dll,.
Xiph.Org FLAC Encoder, 0 x 00200000, 1, 1, dsfFLACEncoder.dll,.
IMA ADPCM, 0 x 00200000, 1, 1, quartz.dll, 6.06.7601.17713
PCM, 0 x 00200000, 1, 1, quartz.dll, 6.06.7601.17713
Microsoft ADPCM, 0 x 00200000, 1, 1, quartz.dll, 6.06.7601.17713
GSM 6.10, 0 x 00200000, 1, 1, quartz.dll, 6.06.7601.17713
CCITT A - Law, 0 x 00200000, 1, 1, quartz.dll, 6.06.7601.17713
CCITT u - Law, 0 x 00200000, 1, 1, quartz.dll, 6.06.7601.17713
MPEG Layer-3, 0 x 00200000, 1, 1, quartz.dll, 6.06.7601.17713PBDA CP filters:
PBDA DTFilter, 0 x 00600000, 1, 1, CPFilters.dll, 6.06.7601.17528
ETFilter, 0 x 00200000 PBDA, 0, 0, CPFilters.dll, 6.06.7601.17528
PTFilter, 0 x 00200000 PBDA, 0, 0, CPFilters.dll, 6.06.7601.17528Midi converters:
Default MidiOut Device, 0 x 00800000, 1, 0, quartz.dll, 6.06.7601.17713
Synth, 00200000 x 0, 1, 0, quartz.dll, 6.06.7601.17713 Microsoft GS WavetableWDM Streaming Capture devices:
Realtek HD Audio Line input, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7601.17514
Realtek HD Audio Mic input, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7601.17514
Realtek HD Audio stereo input, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7601.17514WDM Streaming making devices:
Realtek HD Audio output, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7601.17514
Realtek HDA SPDIF optical Out, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7601.17514
Realtek HDA SPDIF Out, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7601.17514BDA network providers:
Provider, 0 x 00200000, 0, 1, MSDvbNP.ax, 6.06.7601.17514 Microsoft ATSC network
DVBC Microsoft Network Provider, 0 x 00200000, 0, 1, MSDvbNP.ax, 6.06.7601.17514
Provider, 0 x 00200000, 0, 1, MSDvbNP.ax, network 6.06.7601.17514 Microsoft DVBS
Provider, 0 x 00200000, 0, 1, MSDvbNP.ax, 6.06.7601.17514 network Microsoft t
Microsoft Network Provider, 0 x 00200000, 0, 1, MSNP.ax, 6.06.7601.17514Multiple instances Codecs VBI Capable:
The IST Codec, 0 x 00600000, 1, 4, VBICodec.ax, 6.06.7601.17514BDA Transport Information converters:
BDA MPEG2 Transport Information Filter 0 x 00600000, 2, 0, psisrndr.ax, 6.06.7601.17669
Tables, 0 x 00600000, 1, 0, mpeg2data.ax, 6.06.7601.17514 and MPEG - 2 SectionsCP/CA BDA filters:
Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.7601.17708
Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.7601.17708
PTFilter, 0 x 00200000, 0, 0, EncDec.dll, 6.06.7601.17708
XDS Codec, 0 x 00200000, 0, 0, EncDec.dll, 6.06.7601.17708WDM Streaming transformations of the Communication:
Converter, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7601.17514 tee/sink - to the-wellsAudio converters:
Speakers (Realtek High Definiti, 00200000 x 0, 1, 0, quartz.dll, 6.06.7601.17713)
DirectSound Device, 0 x 00800000, 1, 0, quartz.dll, default 6.06.7601.17713
Default WaveOut Device, 0 x 00200000, 1, 0, quartz.dll, 6.06.7601.17713
DirectSound: Realtek Digital Output (Realtek High definition Audio), 0 x 00200000, 1, 0, quartz.dll, 6.06.7601.17713
DirectSound: Realtek Digital Output (Optical) (Realtek High definition Audio), 0 x 00200000, 1, 0, quartz.dll, 6.06.7601.17713
DirectSound: Speakers (Realtek High definition Audio), 0 x 00200000, 1, 0, quartz.dll, 6.06.7601.17713
Realtek Digital Output (Realtek, 00200000 x 0, 1, 0, quartz.dll, 6.06.7601.17713)
Realtek Digital Output (optical), 0 x 00200000, 1, 0, quartz.dll, 6.06.7601.17713---------------
EVR power information
---------------
Current value: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (quality)
Quality indicators: 2576
Activated:
Limitation of the force
That allow half deinterlace
Allow the scaling
Decode power usage: 100
Balanced flags: 1424
Activated:
Limitation of the force
Allow batch processing
Force half deinterlace
Force the scaling
Decode power usage: 50
PowerFlags: 1424
Activated:
Limitation of the force
Allow batch processing
Force half deinterlace
Force the scaling
Decode power usage: 0Hello
You could deal with this issue because of an outdated\corrupt USB controller driver or changes made to the USB settings. I would suggest trying the following steps and check that it helps.
You can refer to the suggestion of Gokul T in the following link and check if it helps.
You can also see the following for more information Microsoft article.
Updated a hardware driver that is not working properly:
http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyI hope this helps.
Please report if the problem persists and we will be happy to help you further. -
Original title:
First here is my card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02479651&cc=ca&dlc=en&lang=en&lc=en&product=4299342 desktop pc
and my mobo card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02560084&tmp_task=prodinfoCategory&cc=ca&dlc=en&lang=en&lc=en&product=4299342
(running windows 7 x 64 and not changed all my pc hardware so everything on the Web page is true)in any case, when I try to plug my mouse optical usb in the port of e/s (usb port) on the front panel (which supports usb 2.0) a notification pops up saying
"one of the usb devices attached to this computer has malfunctioned and windows does not recognize it. Help to solve this problem, click this message. "
so I click it and and called up pop-up windows
"the usb device not recognize."
display 1 unknown device. Link to the image: http://img38.imageshack.us/img38/3579/usbdevicenotrecognizewi.jpg
Then I double click on it, next pop up another window called "unknown device properties" and under "device status", he said:
"Windows has stopped this device because it has reported problems. (Code 43) »
Link to the image: http://img204.imageshack.us/img204/8597/unknowndeviceproperties.jpgAlso the same things happen when I plug in usb, keyboard , but not when I plug a flashdrive usb 2.0 without notification or anything pop up.
Here's what I'm trying to fix it but ended up with saying it was installing the device, installation failed and getting the error failed and unrecognized again...
- Plug my optical mouse on my other ports and it works perfectly fine (to see if its working)
- Plug the mouse (in the wrong port), went to Device Manager and uninstall the unknown device, reboot with usb plug in and have the connection to the internet (not decided)
- Uninstall all devices under USB bus controllers in the Manager device and rebooted with mouse in internet connection (not decided)
- Went to device manager expanded bus controllers USB right-click on power management all the device label "usb root hub" click and uncheck the box "allow the computer to turn off this device to save power" and reboot (do not set)
- Open the normal startup in msconfig (system configuration) selected and restarted (did not set)
- Shut down the computer, disconnect the plug, unplug all the devices connected to all IO ports (usb port specifically) and my desktop pc has left alone for an hour and a half and start it to the top after with everything back plug (mouse in the wrong port) (has not set)
Note: when the mouse is connected to the usb port it is light on substance, but its does not (not flashing do not and when you move, mouse is frozen on the monitor)
Hello
The results highlight the drivers. It is best you contact HP support and get all the latest device drivers.
-
Cannot connect the usb on the UBUNTU 14 client storage
Good evening. is a little of temp I of understand how connect one usb key for my customer VMware - view -client.
I searched on the internet but there is a lot of information and I could not even understand how I can fix this.
I attach the log file to riga76 tells me () May 13, 17:05:46.795: vmware - 6025 | view.bin ( CdkViewUsb_Init: () vmware- view -usbd is running?)
What does this mean?Hello
Thank you for your answer, but I managed to solve the problem.
I downloaded a package on the HP site where the inside was the installation of the orizone view. I unpacked the. Deb and I have copied the file vmware-view-usb in the path-usr-bin of my installation directory. I drew the 4775 permissions and you are done.
-
How to fix the mouse power switch on VAIO VGN-CS115J question?
My mouse on my laptop Sony VAIO VGN-CS115J goes on and out.
It is constantly resetting of the mouse to be recognized by the computer.
All other USB devices are working properly, such as discs hard etc, but keep Mouses to turn on and off.
Symptom: The mouse pointer stops periodically move and it displays a message "Unrecognized USB device" and then, it is recognized again. (this will happen every few seconds, 20 times in about a minute)
I updated the USB drivers and tried several mice on all USB ports.
How can I fix the mouse constantly reset in my laptop Sony VAIO VGN-CS115J?
Friendly greetings,
Jussi Yrjänä
Hello there Zealious!
Please provide the name of the exact model of your laptop. Have you tried to use the USB on another computer?
~ Tim
-
How can I fix the old sick apple mouse from 6 months on wire scrolls alone now
How can I fix the Apple mouse sick, aged 6 months on a thread that has been scrolling OK but now scrolls just of internet pages to the top of the page using El Captain so far?
Probably need a clean place, tried.
-
I have a folder of files in local folders that keeps reappearing after that I erase it. I tried to fix the folder several times. Any suggestions?
This is the name of a folder? Who will be in a file name in your file system. Given his situation, is it possible or likely that the total path length exceeds the limit of the operating system?
For example: http://windows.microsoft.com/en-gb/windows/file-names-extensions-faq#1TC=windows-7
This is not to talk about any other limit which may be inherent in the way that Thunderbird uses names of files internally.
In your position, I explore the Thunderbird profile and check paths, as they appear in the file manager. You should be able to remove all folders that are unwanted here also.
-
Any way to fix the keyboard backlight does not not 2011 macbook pro
No way to fix the keyboard backlight, what does not work, on my macbook pro 2011. El Capitan was installed earlier. I had a gray screen the other day and had to restart in safe mode. That's when the backlight is out. Thank you very much!
Susie
1. press the F6 key twice.
2 reset the SMC and NVRAM.
Reset the NVRAM/PRAM memory. http://support.Apple.com/kb/PH18761
Reset the SMC. Choose the method for "on Mac Laptops with non-removable battery.
-
iPhone 5 c will not charge via USB on the laptop?
Hi all.
I have an iPhone 5 c and as about a week ago, does not charge via the USB port on my laptop. He sees very well in my wall sockets and Sockets USB as well, but not in my laptop. I have an Acer laptop running Windows 7. Windows is up to date, iTunes has the latest version installed. Whenever I plug in my phone, one of the following conditions occurs:
(1) does not have
(2) noise "plugged" USB lights, the window on the lower right, tell that a USB device has malfunctioned
(3) (rarely) of phone calls after I tried several things
What happened is I would plug my phone, she would charge via USB, iTunes opens automatically, and "trust to this computer" popup would come on my phone if I had unlocked it. None of this is happening now. I did the following to try to remedy:
(1) power cord iPhone replaced (it was time for a new anyway)
(2) uninstalled and reinstalled iTunes
(3) restart computer and phone probably 29856 times
(4) device Manager... nothing comes up at all, not even the unknown device. RARELY the unknown device comes up, then I get a "Code 10: this device cannot start" error, but it is * in a handbasket just trying to get to THIS point! and IF I do what they say to do to correct a code 10 (uninstall all USB and restart the computer, then USB devices hook to the top one at a time), so I'm now at my problem of a communication that don't meet pluse between my phone and PC
5) tried to the registry editor, but not "upper filters" option rises
(6) virtually every other option on this thread of 5 pages iphone not recognized by Windows 7
Help, please?
The USB port of your laptop does not provide sufficient power to recharge the phone. It is a hardware problem with your laptop, not the phone.
-
fix the back up
Check out this guide prepared by John Galt:
-
anyone can helpme to fix the error 48 when I was last updated iOS 9.3 Please?
anyone can helpme to fix the error 48 when I was last updated iOS 9.3 Please?
Hi Alfareshi96,
Welcome to the communities of Apple Support! I'm sorry to hear that you encounter these problems with your iPhone and a recent update of iOS. If you get an error when you try to update, you can find information and troubleshooting procedures described in the following articles useful:
If you see an error when you update or restore your iPhone, iPad or iPod - Apple Support
Get help with iOS update or restore errors - Apple Support
Concerning
-
How can I fix the icons who are unable to move the bar to the add-on?
How can I fix the icons who are unable to move the bar to the add-on?
It didn't help me, but it was a good try. I found an extension called U I 1.4.4 Fixer who did most of what I was looking for. Thanks for answering my question so quickly Cor - el.
-
Cannot start OSs of HDD external USB on the Satellite NB10t-A-101
I'm unable to install Linux on the Satellite NB10t-A-101, because it does not allow to boot from USB or install other OSs.I tried to circumvent this way: (it came with pre-installed Windows 8).
(1) turning off SecureBoot (which I did)
(2) putting USB at the top of the list of starting the computer.But it does not work.
I have two HDD USB (a TPG, the other normal) partitioned and it s impossible for them starting with this model of Satellite. I m thinking to return it back to the store that I need to install/start several OSs.
Hello
Great that you are using Linux on your PC!
You mention that you have disabled the secure boot.
It is very good. But you don't say anything about the startup mode and nothing about what Linux you try to start.Most of the distros must support UEFI but that can't be true for each of them.
If you want Win8 dualboot with a Linux distro, so you need to active UEFI and able to start in this mode distribution.
If you use a late clone-Ubuntu, Fedora or OpenSuse, you should be fine!Another clue could be to take the USB key and try to start another PC from him.
Which will give a clearer picture of where the problem lies: on your key or the compatibility of firmware NB10 & distro Linux of your choice.If you try to boot from a USB - HDD, I'm afraid I'm a bit at a loss as I've never tested.
I hope this helps!
Tom BR
Maybe you are looking for
-
Synchronization of two inputs frequency meter with several analog inputs
Hi all I'm relatively new to LabVIEW and I'm trying to collect data from multiple sources with calendar sync on the acquisition, but I can't understand. My problem is that I have two inputs frequency meter, an optical tachometer reading one pulse per
-
Someone at - he heard the Sony NEX 7 be attached to Adobe Lightroom?
Looking to see if Sony and Adobe can work to attach NEX 7, Adobe Lightroom 4?
-
HP psc photosmart 2410: I want to print only black
I am constantly running out of color ink and I was wondering if I can get my printer to print black ink only I lost my manual so any help would be appreciated Thank you
-
I am eager to implement the ability to send faxes via my computer instead of going to the fax machine, located in another room. This fax machine is a network printer/fax - Sharp B402SC MX to be precise. I tried to go through the steps with the netwo
-
How can I signature on any photo album