u430p update of the bios could not update 7ccn61ww

Similar Questions

• Satellite C660D boot - update of the BIOS has not

  Hello

  In recent days, I get a blue screen of death with the error 'whea_uncorrectable_error', I read something about the BIOS update, because the error is probably caused by the previous version of the BIOS. I gave the updated correctly, but as soon as restarting my laptop, nothing has been started.

  The fan and the keyboard work but nothing else. I tried to remove the RAM, remove the CMOS battery, pulling on the battery and holding the power button, but nothing seems to work.

  Can you please help me and tell me how to recover my BIOS?

  because the error is probably caused by the previous version of the BIOS.

  Older version of BIOS does not BSOD... cause the BSOD appeared during the last day, but I guess the laptop worked correctly in the past under the old version of BIOS... the BIOS could not the problem here...

  However, the fact is that the laptop is dead now... probably because the update process was interrupted due to the BSOD...

  From my point of few the EPROM has to be re-flashed again using BIOS crisis disk...

  Some people tried to solve this similar problem using the 3rd party crisis disk (use forum search the crisis disk to find similar topics), but it still does not...

  That's why I think that in most cases only the Toshiba ASP may be able to reflash the EMPRO using the original disk of crisis

• Satellite L50 - PSKJNR - update of the BIOS is not compatible

  Hello.

  Finally, you set a BIOS update driver on your site (a few days ago it was cracked).

  I was so happy that started to read manuals on bios recovery (because I'm really scared of BIOS update). But for some reason I need a newer version of the BIOS (to disable the video card and bluetooth adapter).

  Well, I started the file and got: "error. The bios is not for your PC"why? I am sure, I have chosen a correct version of the laptop!

  Hoping for an answer.
  Mike.

  Hello

  Do you have something on your laptop or it turns with the factory system pre-installed?
  From my own experience such BIOS error message may appear due to some missing essential Toshiba software. For example using Win 7 added value package is required. To help to win 8 Toshiba System Driver must be installed.

• Satellite Pro 4220 - update the BIOS does not start

  Hello!

  Please, someone tell me what is the problem with the update to v1.60 SP4220 BIOS? It does not start even do it according to instructions.

  I did the following:
  1 download/have unzipped the package v1.60 since the BIOS page on a non-bootable floppy disk empty
  2. put the floppy in the computer
  3. turn on the device with the F12 key

  With a floppy, I got the "non-system disk" error and another with a "EMBRL" error message missing. What is it, I'm not familiar with that one?

  Best regards

  Pete v.

  Hello

  Can I ask why you want to update the BIOS?
  You have problems?
  If the laptop works well the update of the BIOS is not necessary! My laptop is about 6 years old and I have no day BIOS!

  However, I think that you didn't use the right update procedure.
  Please check this document before starting the BIOS update:
  http://support.toshiba-tro.de/KB0/TSB4A00SD000BR01.htm

• "The instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. "when I go to create a new pdf of the file after the installation of updates

  Original title: "the instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. »

  I worked on a design project for a few days I made several pdf files from. During the night, Windows ran and installed the updates on my computer. (My design file was open at the time). Now, when I go to create a new pdf of the file, I get the following error code: "the instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. »

  HELP - I can't find a solution.

  Thank you!!

  Hello

  1. what program you use for your design project?

  2. did you run the repair of this program?

  Perform System Restore on the computer and check if that helps.

• The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  
  

  Hi Marcelo,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• Can help to solve the issue of "the application could not start properly? < < Error after update CC

  After update Adobe after effects Adobe first Pro CC and CC, via the cloud to create, update, I get the following programs during the boot error message.

  Box "application error".

  "The application could not start correctly (0xc0000142). Click OK to close the application. »

  I had several programs that I've updated (Adobe PhotoShop, Adobe Audition, etc.), at the same time. None of the other programs seems to have problems starting.

  
  

  I uninstalled Adobe after effects Adobe Premiere Pro CC and CC and have the same results, aka, error notice, after reinstalling.
  

  
  

  I did some research and do not seem to have found a definitive solution to the problem.

  
  

  • Can you please help me solve this problem. If you have encountered this problem and it is successfully resolved your entry is particularly useful.
  • Can you suggest ways to avoid this, or similar questions in the future. It makes me feel very reluctant to update my software CC if I'm going to experience the hours/days/weeks of delay due to having to solve problems.

  
  

  Thanks in advance for your help.

  Hi Leslie,.

  After update Adobe after effects Adobe first Pro CC and CC, via the cloud to create, update, I get the following programs during the boot error message.

  Box "application error".

  "The application could not start correctly (0xc0000142). Click OK to close the application. »

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• I just downloaded and installed the Lightroom update version (5.7).  When I now try to open the program I get an error message stating "the application could not start properly (0xc00007b).  It happened the last time I upgraded and I w

  I just downloaded and installed the Lightroom update version (5.7).  When I now try to open the program I get an error message stating "the application could not start properly (0xc00007b).  It happened the last time I upgraded and sent me a few files that has corrected the problem.  Can help you.  With our thanks.  John

  Try this: error "Unable to start properly - 0Xc00007b"

• Updated to the Mavericks and obtain the following: could not initialize Photoshop because of a program error

  Updated to the Mavericks and obtain the following: could not initialize Photoshop because of a program error

  I tried all will set them on the web that I can find is Trash the Prefs, shift when it is open and plug-ins stop, download Java Update, deleted and reinstalled

  My business is to stop can't find a fix from Apple

  Did you run the vacuum after you have uninstalled and before reinstalling?

  -http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  AND JUST FOR MAC USERS - some links 10.9.x

  the following link tells After Effects, but check YOUR permissions.

  -http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml

  -Mac 10.9.4 and OpenCL number https://forums.adobe.com/thread/1514717

  -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922

  -more than Mac 10.9.3 https://forums.adobe.com/thread/1491469

  - and https://forums.adobe.com/thread/1507936

• What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

  I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot read Psychonauts off Steam error - the game could not create the Direct3d device. Please make sure your video drivers are installed properly

  Original title: Running Win7 on Bootcamp. Error: The game could not create the Direct3d device. Please make sure your video drivers are installed properly.

  I try to play Psychonauts out of steam. I am currently running Windows 7 via Bootcamp on my MacBook Pro 13-inch mid-2010. When I try to run the game, I get the message:

  The game could not create the Direct3d device. Please make sure your video drivers are installed properly.

  I tried to update DirectX, and I tried to download the Nvidia drivers associated with my laptop model. How can I solve this problem?

  Thanks again for the help.

  I'm not familiar with Apple but I found this:

  http://support.Apple.com/downloads/#NVIDIA

  Except that it is what I have from NVIDIA:

  http://www.nvidia.com/object/notebook_drivers.html

  Previously, only the original beta for mobile graphics drivers were available on the NVIDIA site with manufacturers having full control and ownership of the final version.

• The instruction at "0x7c9105f8" referenced memory at "0x08c60010". The memory could not be 'read'.___Click on OK to terminate the program.

  My problem is that whenever I try to open a game, I get the error message that

  "The instruction at"0x7c9105f8"referenced memory at"0x08c60010". The memory could not be "read".

  Click on OK to terminate the program. »

  and I have to close the program.

  Hi Dani,

  1. who is the edition of Windows that is installed on the computer?
  2. what game you try to play?

  Try these steps and check the result.
  Step 1: Run the memory diagnostic tool
  a. see diagnosis of problems of memory on your computer
  b. Once you correct the errors, check if the problem persists.

  Step 2: Check the game sellers website to see if there are updates or patches for the game and install it.

  Step 3: If the problem persists, uninstall and reinstall the game and then check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP ENVY 4500: Error: the printer could not print

  After a saga of long hours to get my new 4500 DESIRE to produce a readable text, I finally have a wonderful clear text, but now realize a new problem: the printer stops at Midway through each second page and it spits out just with the white background.

  An error message appears briefly in windows that said "the printer could not print. If I click on it there is no more details. It seems that windows stops just sending information to the printer. My print spooler service is running and we are within 5 feet of the router with a strong bond. I did everything I can think of including updating the firmware and driver.

  Any ideas?

  Thanks for your suggestions! However, most did not address my problem. I ran the Print and Scan doctor before posting this thread, but it found no errors. I was unable to get any additional details about the error.

  SOLUTION: I found a solution after reading this thread. I've updated Windows 8.1 a few weeks since the last time I had the printer works. I've updated Windows again today and the problem immediately went away.

  Although I couldn't see everything concerning him spool printing or printer in the update drivers, it seems that the bug was caused by a Windows Update, and subsequently fixed by another update. I was able to print a 40 page document and several page 5 those without any problem, when before it was bad, making it through several pages before he died. Fixed!

• Error - the instruction at "0x7c923845" referenced memory at "0x00000000". the memory could not be "read". Computer Windows XP freezes when online.

  Original title: svchost.exe - Application error.

  When I'm online I get the error message appear as follows:

  Svchost.exe - Application error

  The instruction at "0x7c923845" referenced memory at "0x00000000". the memory could not be "read".

  Then my computer freezes

  Don't know what triggered it on my machine, I do not use 'messenger' , but I discovered that it was something to do with Windows. I have a Toshiba laptop, I finally ran the process of "adding value to products" using their 'product recovery disk '.  It took hours to reload everything and download the updates after the hard drive has been re-configured, but it seems to have solved the problems that I had with.  Radical solution, I know, but I'm not a "geek" so was becoming more frustrated with the constant "freezes" and poor performance.  I can only assume that my Windows XP system had somehow been corrupted.  It's all working fine now, fingers crossed!

• copy error: error 0 * 8007045D: the request could not be performed because of an i/o device error

  When copying the files, I get this error which is lower than
  an unexpected error prevents the operation.make a note of this error code, which might be useful if you get additional help to resolve this problem:
  error 0 * 8007045D: the request could not be performed because of an i/o device error
  filename DSc02828
  file type jpg
  size 3.27 mb
  updated the 09.11.2012
  try to jump again cancel
  Whats wrong here

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  1. don't you make changes on the computer before the show?
  2. where exactly you are trying to copy the file?

  Run check disk on the computer.
  a. click Start , and then typecmd.exe in the start search and then press ENTER.
  b. right-click on cmd.exe and clickrun as administrator.
  (c) in the command prompt, type the following command and press ENTER.
  Chkdsk /f
  Note: You may be prompted by a yes / no question. TypeYes and press ENTER.
  d. restart the computer so that the disk check starts. It will take about half an hour to complete the process of error checking. Do not restart the computer when the current disk check.
  Note: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
  
  Summary the link:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
  http://support.Microsoft.com/kb/952272

  Just reply with the results. I'd be happy to help you further.