Ubuntu 9.10 not working do not under Vmware Workstation 7

Similar Questions

• Why does not turn VMware Workstation in a less than authorized VMware Workstation OS prompt, if not supported?

  Hey

  IM wondering why isn't VMware Workstation must be installed and running (with virtual machines) on a guest operating system in VMware Workstation... I understand if it is not supported (such as it is running a virtual machine on a virtual machine that could be run on another virtual machine... you get the point), but at least allow him...

  When you try to turn on a virtual computer, we check the existence of the backdoor in a process that runs at CPL 3 and IOPL 0 VMware.  If we find the VMware backdoor, we refuse to let turn on the nested VM.  The vmx.allowNested configuration option to bypass this check.  However, if you have restricted the backdoor to the guest code that runs with IOPL > = CPL (using the option monitor_control.restrict_backdoor to the external virtual machine), then we can't find the door VMware backdoor, and we let you turn the nested in any case virtual machine.  Thus, if the external virtual machine is set up correctly, you don't need the vmx.allowNested option.

  In future versions, we can also check to see if you are running under some other hypervisor that announces its presence through pieces of CPUID feature.  If so, we will refuse to turn on the nested VM.  In this case, you will need the vmx.allowNested option to circumvent these controls.

• Ubuntu 11.04 very slow after upgrade to VMWare Workstation 8.0

  Hello

  After the update to VMWare Workstation 8.0 my Ubuntu 11.04 comments system (which worked very well with Workstation 7) behaves very slow sometimes.

  Slowly I want to say first that it is very laggy when I scroll conent inside windows, and also when I move windows.

  And with sometimes I want to say that this is not always the case. Sometimes, everything works fine for 1 or 2 hours and she begins and, sometimes, that's the problem immediately after starting Ubuntu.

  The problem occurs when restart Ubuntu does not help. But what is stopping Ubuntu and also restart VMWare Workstation on the host (in my case Windows 7) completely. When I do this and I'm lucky everything seems normal again for a while (1 or 2 hours). After that starts all over again.

  VMWare Tools is installed and the comments system has more then enough resources. I also improved the virtuale image to the latest version so that the new features in Workstation 8.0 are available.

  I first thought that maybe it's a RAM problem but the system begins to lag when there is still 1 GB + RAM available and 0.0% swap used.

  Any ideas what I could do? This is quite annoying...

  You can see the same bug that is described in this thread: http://communities.vmware.com/message/1840185#1840185

• Unable to Boot PXE under VMWare Workstation

  Note: This is a LABORATORY environment!

  I have 2 servers

  SRV1 - DHCP, ADDS

  SRV2 - WDS

  Both are installed in VMWare Workstation 12 and is assigned to a Segment named "Server LAN" local network.

  I have 2 Workstation

  WKS1 - no BONES and Belonged to a local Network Segment named "LAN Workstation"

  WKS2 - with OS (Win8) and Belonged to a local Network Segment named "LAN Workstation"

  1 Virtual router connected both the Segment of LAN 'Server LAN' and 'LAN workstation.

  Virtual router is configufed for transfer/DHCP relay.

  I can say that the DHCP relay works because WKS2 can get an ip address from the SRV1 when starting Windows 8. However, WKS1 and WKS2 in PXE startup I get this message.
  

  Any ideas?

  I solved the problem, it turns out that option 66 and 67 was not configured in my DHCP for the scope that has been maintaining the "LAN workstation.

  I have configured the DHCP in SRV1

  Option 66 for point on my WDS server.

  

  and Option 67 to point to the 64-bit version of wdsnbsp.com in the wds server.

  

• Windows under Vmware Workstation 7 8

  Hello

  With Vmware Workstation 8, can I create a virtual machine in which I could you Installer Windows 7?

  Thanks in advance if anyone has any experience of this.

  Kind regards

  Yes, sure, no problem. And if you go on the Compatibility Guide ( http://www.vmware.com/resources/compatibility ), you're looking for in the guest operating system section, pay the proceeds Workstation with Windows 7 as OS name of family, you will find that Windows 7 and SP1, 32-bit or 64-bit are supported on WS 8.0. Also, if you create a new virtual machine, you can choose Windows 7 as guest operating system. It is the proof that it works.

  A +.

  Franck

• 2.04 Ubuntu comments on VMware Workstation 9 under Win7 can't see ext4 USB drive

  Comments from 2.04 Ubuntu on VMware Workstation 9 under Win7: on computer A trivially, I connected to an out-of-the-box 64 GB USB drive formatted for VFAT on Ubuntu in a VM. I re-init'ed the player for ext4 (mkfs.ext4), mounted, drop a bunch of stuff on him (which took awhile), he dismounted and walked away. The next day, identically configured computer B, I inserted the USB key. Natch, Win7 may not go up because it does not ext4. But Ubuntu don't see either, so I can't be installed. Do not see under removable devices, no small icon bottom left of the screen of VMware, nothing in the settings menus or properties, etc. I think it's just me being a noob to VMware, but it seems that Ubuntu under VMware Workstation 9 cannot see the drive unless Win7 can go up. Seems unlikely. KB searching, Googling, etc. produce many unrelated things. Ideas? AdvTHANKSance.

  Here is the final answer: works great on an earlier version of VMware Workstation 9 on one of the Windows 7 of my client machines, it didn't work on my Windows 7 computer. I upgraded to VMware Workstation 10 on my Windows 7 computer, and now it works perfectly. If I call you this a bug in this version later 9 which was set at 10. Could also be had I simply uninstalled 9 and reinstalled which would have fixed it too. But I'll never know.

• Problem with configure vmware workstation 6.5 with Ubuntu 9.04 64 bit latest kernel

  for the Intel-driving problem, I installed a new kernel for Jaunty.

  Normally, if you change the kernel, need new VMWARE-Workstation, but it does not work.

  I'm getting the following answer

  vmware sudo

  Login to /tmp/vmware-root/setup-26435.log

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  Stopping VMware services:

  Virtual machine communication interface is

  Virtual machine monitor makes

  File system is blocking

  Using 2.6.x kernel build system.

  do: enter the directory ' / tmp/vmware-root/modules/vmmon-only '.

  do /lib/modules/2.6.31-999-generic/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

  make [1]: Entering directory ' / usr/src/linux-headers-2.6.31-999-generic'

  CC /tmp/vmware-root/modules/vmmon-only/linux/driver.o

  In file included from /tmp/vmware-root/modules/vmmon-only/linux/driver.c:31:

  /tmp/vmware-root/modules/vmmon-only/./include/compat_wait.h:78: error: conflicting types for 'poll_initwait '.

  include/Linux/poll.h:67: error: previous declaration of 'poll_initwait' is here

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c: in function 'LinuxDriverSyncCallOnEachCPU ':

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1423: error: too many arguments to function 'smp_call_function '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c: in function 'LinuxDriver_Ioctl ':

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:2007: error: too many arguments to function 'smp_call_function '.

  make [2]: * /tmp/vmware-root/modules/vmmon-only/linux/driver.o error 1

  make [1]: * error 2

  make [1]: leaving directory ' / usr/src/linux-headers-2.6.31-999-generic'

  make: * http://vmmon.ko error 2

  make: leaving directory ' / tmp/vmware-root/modules/vmmon-only '.

  and the SETUP LOG

  Juli 28 19:20:55.486: app | Journal for VMware Workstation pid = 24193 version 6.5.2 = build = build-156735 option = output

  Juli 28 19:20:55.486: app | Host codepage = UTF-8 encoding = UTF-8

  Juli 28 19:20:55.486: app | Login to /tmp/vmware-root/setup-24193.log

  Juli 28 19:20:56.550: app | Extract the sources of the vmmon module.

  Juli 28 19:20:56.600: app | Module construction with the command: / usr/bin/make

  C - / tmp/vmware-root/modules/vmmon-only self-build SUPPORT_SMP = 1

  HEADER_DIR=/lib/modules/2.6.31-999-generic/build/include

  CC = / usr/bin/gcc = GREP / usr/bin/make IS_GCC_3 = no VMCCVER = 4.3.3

  and a box with this

  Error

  Failed to build the kernel module.

  Check the log file

  Does anyone know a Solution?

  Thank you

  Greetings

  Stefan

  -

  ---

  Computer laptop D830 DELL
  V9.04 Ubuntu Jaunty 64 bit

  
  

  Latest Version of VMWare Workstation

  -

  ---

  < / div >

  If you want to use the latest kernels that you should look for patches to update - look at this forum to find the last.

  http://communities.VMware.com/thread/221724?TSTART=0

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Installation of VMWare Workstation in Ubuntu [Hardy - Haron]

  Hello Gil,.

  I'm newbie in Linux. I was already using VMWare workstation in my windows.

  Now, I want to install the same version of http://Hardy - 8.04 Ubuntu linux.

  I was downloaded package VMware-Workstation - e.x.p - 240242.i386.bundle more here.

  Can anyone suggest me the steps for installation?

  Thank you.

  Hello

  You can follow this video. It shows how to install Workstation 6.5 on Ubuntu, but it should work for Workstation 7 also.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• I upgraded my laptop to windows 8 unfortunately Shamela library doesn't is not display Arabic titled correctly. I must say it worked very well under windows 7, what should I do?

  I upgraded my laptop Toshipa from windows 7 to windows 8, library Shamela worked very well under windows 7, now after the library Shamela upgrade does not work properly and the titles are written in the language of gibberish. Any solution please

  Are you referring to a custom library that you created?

  If you are, try to remove the library then re-create and see whether or not it appears correctly.

• RHEL or centos 5.3 does not work under vmware to 6.5.2

  Hi all

  I use vmware to 6.5.2 workstation on linux.

  RHEL or centos 5.3 does not work under vmware 6.5.2. When I launch a 5.3 rhel or centos 5.3 on vmware workstation 6.5.2 on linux installation and configuration goes off well. and I can't connect to the internet as well. normally, I put a static IP address and move forward with things.

  but once I'm done for the day I closed the comments and also the host machine. When I start the computer host the next day I get a message (I moved it Cancel I copied it)

  normally, I click on "I copied it" and move forward. When I start the operating system, I find that IP in DHCP address switches and the many changes that I made to go to pot. It normally happens when I create a linked to the base OS clone original.

  never, I face this problem when I used it with vmware for windows and I used this clone related all this time.

  could someone please shed more light on this? I do not feel this type of error deskto openfiler or suse. I use clone bound only with openfiler and suse.

  that linked clones are of concern. Here's what I do.

  I have install say hundred os 5.3 as a basic OS and do not touch.

  Ok

  When I want to test something on this subject I create a linked clone (which automatically creates a snapshot).

  now when I want to create another instance of hundred bones, I create another clone related base (another cliché separate) and work on it.

  Although for Workstation is you actually have a 'new' virtual machine and if you copied or moved is a good question. The problem is that most people do not understand the consequences of the choice of one over the other. If you have NEVER 2 clones related running at the same time, then you would like just to use the "move" option In this case your linked clone is just an advanced preview where you have 2 lines long that are independent from each other.

  OTOH if you go for a start more as a related clone, then you will get problems when they are in the same network they will try both to claim the same IP because they have the same MAC address network. This can cause all sorts of weird problems. If you choose the option "clone", while these problems do not occur, but you will have to reset some settings such as address IP etc...

  --

  Wil

  _____________________________________________________

  Visit VMware developers at http://www.vi-toolkit.com wiki

• HGFS works do not under Linux of Kali

  The host is runing VMWare Workstation 9.0.3 build-1410761

  The guest is a Kali (uname-r: Linux kali kali1 - 3.12 EAP-686 SMP 3.12.6 - 2kali1 Debian #1 (2014-01-06) i686 GNU/Linux)

  And I try installing VMwareTools - 9.2.4 - 1398046.

  I got this error when you try to install VMwareTools - 9.2.4 - 1398046

  /tmp/modconfig-ogGpKq/vmhgfs-only/file.c: in function 'HgfsOpen ':

  /tmp/modconfig-ogGpKq/vmhgfs-only/file.c:658:27: error: incompatible type for argument 3 of 'HgfsSetUidGid '.

  In file included from /tmp/modconfig-ogGpKq/vmhgfs-only/file.c:45:0:

  /tmp/modconfig-ogGpKq/vmhgfs-only/fsutil.h:92:6: Note: expected "uid_t" but the argument is of type 'kuid_t '.

  /tmp/modconfig-ogGpKq/vmhgfs-only/file.c:658:27: error: incompatible type for argument 4 of 'HgfsSetUidGid '.

  In file included from /tmp/modconfig-ogGpKq/vmhgfs-only/file.c:45:0:

  /tmp/modconfig-ogGpKq/vmhgfs-only/fsutil.h:92:6: Note: expected 'gid_t"but the argument is of type 'kgid_t '.

  make [4]: * [/ tmp/modconfig-ogGpKq/vmhgfs-only/file.o] error 1

  make [4]: * awaiting as outros processos terminem.

  /tmp/modconfig-ogGpKq/vmhgfs-only/fsutil.c: in function 'HgfsChangeFileAttributes ':

  /tmp/modconfig-ogGpKq/vmhgfs-only/fsutil.c:680:20: error: incompatible types in the allocation of type "kuid_t" of the type "uid_t".

  /tmp/modconfig-ogGpKq/vmhgfs-only/fsutil.c:682:20: error: incompatible types in the allocation of type 'kuid_t' to type 'uint32 '.

  /tmp/modconfig-ogGpKq/vmhgfs-only/fsutil.c:685:20: error: incompatible types in the allocation of type 'kgid_t' of type 'gid_t.

  /tmp/modconfig-ogGpKq/vmhgfs-only/fsutil.c:687:20: error: incompatible types in the allocation of type 'kgid_t' to type 'uint32 '.

  /tmp/modconfig-ogGpKq/vmhgfs-only/fsutil.c: in function 'HgfsSetUidGid ':

  /tmp/modconfig-ogGpKq/vmhgfs-only/fsutil.c:1664:21: error: incompatible types in the allocation of type "kuid_t" of the type "uid_t".

  /tmp/modconfig-ogGpKq/vmhgfs-only/fsutil.c:1672:24: error: incompatible types in the allocation of type 'kgid_t' of type 'gid_t.

  /tmp/modconfig-ogGpKq/vmhgfs-only/filesystem.c: in function 'HgfsInitSuperInfo ':

  /tmp/modconfig-ogGpKq/vmhgfs-only/filesystem.c:234:15: error: incompatible types in the allocation of type "uid_t" of the type "kuid_t".

  /tmp/modconfig-ogGpKq/vmhgfs-only/filesystem.c:240:15: error: incompatible types in the allocation of type "gid_t' of type 'kgid_t '.

  make [4]: * [/ tmp/modconfig-ogGpKq/vmhgfs-only/fsutil.o] error 1

  make [4]: * [/ tmp/modconfig-ogGpKq/vmhgfs-only/filesystem.o] error 1

  make [3]: * [_module_/tmp/modconfig ogGpKq/vmhgfs-only] Erro 2

  make [2]: * [branded] Erro 2

  make [1]: * [all] Erro 2

  make [1]: Saindo diretorio "/ usr/src/linux-headers-3.12-kali1-686-pae".

  make: * [vmhgfs.ko] Erro 2

  make: Saindo diretorio "/ tmp/modconfig-ogGpKq/vmhgfs-only.

  The filesystem (vmhgfs module) driver is used only for the shared folder

  feature. The rest of the software provided by VMware Tools is designed to work

  regardless of this function.

  If you want the shared folders feature, you can install the driver of

  running vmware-config - tools.pl again after making sure that gcc, binutils, make

  and your kernel sources are installed on your computer.

  These packages are available on the installation of your distribution CD.

  [Press the Enter key to continue]

  ---------------------------

  There is no hope for the sharing of files between the host and the guest?

  Ok! After a few hours searching on the Internet I found someone who has the solution (https://github.com/rasa/vmware-tools-patches).

  The host is runing VMWare Workstation 9.0.3 build-1410761

  The guest is a Kali (uname-r: Linux kali kali1 - 3.12 EAP-686 SMP 3.12.6 - 2kali1 Debian #1 (2014-01-06) i686 GNU/Linux)

  And I try installing VMwareTools - 9.2.4 - 1398046.

  1 - run: apt - get install dkms build-essential linux-headers-$(uname-r) psmisc

  2 - run: git clone https://github.com/rasa/vmware-tools-patches.git

  3 - run: cd vmware-tools-fixes/patches

  4 remove all files except "vmhgfs".

  5 - Download the latest VMwareTools by clicking the bar of VMWare > VM > install/reinstall VMWare Tools. It will open a virtual CD that contains the file 'tar '.

  6 - copy VMwareTools - 9.2.4 - 1398046.tar.gz "vmware-tools-patches" folder.

  7. on "vmware-tools-patches" folder, run:./untar-and-patch-and-compile.sh

  This procedure worked for me. I didn't even need to restart the virtual machine. All shared folders are now working.

• Workstation 8 vmware-workstation-server works not not on Ubuntu 11.10

  Hi people:

  Just, I have upgraded my Ubuntu 10.10 to 11.10 and replaced VMWare Server 2.0 with Workstation 8.02.  It seems that the vmware-workstation-server service is not running.  I'm unable to connect from a web page and the application vmware itself is not able to connect.  When I try to activate the dialog application vmware service I get the following messages in the terminal window where I ran vmware:

  update root@naplesubuntu:~#-rc.d: WARNING: /etc/init.d/vmware-workstation-server LSB missing information
  update - see rc.d: < http://wiki.debian.org/LSBInitScripts >
  Adding system for etc/init.d/vmware-workstation-server start...
  /etc/rc0.d/K01vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/RC6.d/K01vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/RC2.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/rc3.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/RC4.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
  From Workstation Server: fact

  If I disable the vmware application service, I get the following in the terminal window:

  root@naplesubuntu:~# remove any links of the system for etc/init.d/vmware-workstation-server...
  /etc/rc0.d/K01vmware-workstation-server
  /etc/RC2.d/S03vmware-workstation-server
  /etc/rc3.d/S03vmware-workstation-server
  /etc/RC4.d/S03vmware-workstation-server
  /etc/RC6.d/K01vmware-workstation-server
  Stop server workstation: fact

  If I believe that the service is running, but not doing anything, even though I do not see a specific process for this and there seems to be a vmware-workstation-server executable in/usr/bin.

  Not very well where to go from here.   I tried to uninstall and reinstall the workstation and even using a different port number for the Desktop server, but without any result.

  Suggestions welcome.

  Are you running other services on port 443 on this host?

• Snapshots works do not (under the descriptive name than I do the topic)

  I am running WinXP 64 on my computer host and Win 7 64 as my guest in VMware Workstation.

  It is a new clean install of the guest computer.  Since this new/clean installation, I have one generated a string of 2 snapshots of the virtual machine.  I'm doing a snapshot 2 change (for example, add a folder on the desktop) and then in the 'Go To' instant 1 Snapshot Manager.  My expectation is that I've traveled back in time and this issue should not appear.  Fake!  The folder is where another changes or updates made to snapshot 2.

  Is it a known bug, or as is too often the case... it's me?

  Regards and thanks in advance.

  k

  Good to hear, thanks for the comments.

  André

  I've marked the issue as "assumed answered".

• When I connect to Hotmail I get a message saying "this page is access to information that is not under its control. It is a security risk. »

  original title: new Info box in hotmail:

  Recently when I sign in to hotmail messages I get a box that says: this page is for access information that are not under its control, it is a security risk. -What this means and what I can do to get rid of him?

  Hello

  I'm sorry, but we cannot help with hotmail problems in these forums in response to vista

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

  Forums

  E-mail client and the appliance issues

  Hotmail Sign In questions

  Lost or deleted emails

  People and Contacts

  Reading, writing, and formatting mail

  Sending and receiving mail

  Sign in, and sign to the top and account security

  Using the Hotmail calendar

  Using Web Messenger

   

   

  Consult with Microsoft Certified Solutions

  How to work the views Active Hotmail?

  Your account has been temporarily blocked

  What to do if you can't connect to Windows Live Hotmail

  Compromised account - unauthorized account access

  Reset your Windows Live ID password

  Error when you try to send an e-mail: your message seems to have triggered our spam filters.

  Change your Windows Live ID password

• Ubuntu Grub does not detect not Windows partition

  Hello
  I am currently using a laptop ACER provided with pre-installed Windows Vista. About 6 months ago I had my boot dual PC by Ubuntu editing I. Everything worked fine for a few months, I used to get an option to boot into Vista at startup. But suddenly, this option disappeared. I am not able to understand why this happened. Now ACER not provided me with any disk recovery. Please suggest what to do.

  http://UbuntuForums.org/

  The question in the Ubuntu Forums above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also, ask them if you still have on your computer/laptop recovery Partition to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you press F10 or Alt + F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner