UC 540 VIC 4 FXO ADD CARD IN THE EXPANSION OF VIC SLOT

Hi all

I would add an extra card to 4 FXO VIC to the 540 CPU expansion slot. I can add additional VIC 4 FXO card without adding DSP modules. ?

Same device I need to create the System Attendant service auto. What are the necessary permit for the auto attendant?

Product details are given below

UC 540 VIC 4 FXO ADD CARD IN THE EXPANSION OF VIC SLOT

Processor UC540W - FXO - K9 (MPC8358) of Cisco (revision 0 x 100) with 235520 K/K 26624 bytes of memory.

MPC8358 CPU Rev: Part Number 0x804A, Revision ID 0 x 20
30 user licenses
10 FastEthernet interfaces
2 terminal lines
1 module of virtual private network (VPN)
4 FXO voice interfaces
4 FXS voice interfaces
1 voice interface MoH
1 802.11 radio
1 cisco service engine (s)
128 KB of non-volatile configuration memory.
250880K bytes of ATA CompactFlash (read/write)

Kind regards

Jose Ajay K

Hi ajay1komban,

You don t need a permit for the System Attendant service auto and expansion slot VIC, you must take into account the Conference and transcoding of design, you can check the total number of session from this link:

http://www.Cisco.com/c/en/us/products/collateral/unified-communications/...

If this was helpful, please rate.

Kind regards.

Tags: Cisco Support

Similar Questions

  • When I press the button Add card on my phone app here is I get the error message

    Hi thanks, my cards have been on my iPhone 6plus for quite awhile. I recently bought an iwatch series 1. Watch and phone software is up to date. My app to watch on my phone recognizes my cards when I press the map button Add on my phone app here is I get the error message.

    Hello

    To be able to add cards to pay Apple on your watch, it will first the configuration of the area selected (like on your iPhone):

    • On your iPhone, in the application of the watch, go to: Watch My > general > language and region - check Format correct region is selected.
    • If they are already correct, it can help to select again the two the same Format of the region and also the language of the system itself.

    Then follow the instructions here to add cards to the Watch:

    More information:

    Pay help, add maps of Apple - Apple Support

  • Cannot add credit cards to the portfolio on Apple Watch series 2

    So I just got my new Apple Watch series 2 today.  I tried to add my credit cards in my wallet on my Apple Watch, but when I try to do it I get an error saying "could not set up Apple pay - error when setting up Apple pays.»  It is only a matter on my Apple Watch that cards are configured correctly on my iPhone running iOS 10 6s.  Any thoughts on how to solve this problem?  I tried to do a hard reset on the watch and my iPhone and the problem persists.  Thank you!

    Hello

    Make sure that you follow all the steps here:

    To be able to add cards to pay Apple on your watch, you must have the region setting chosen for her (like on your iPhone):

    • On your iPhone, in the application of the watch, go to: Watch My > general > language and region - check Format correct region is selected.
    • If they are already correct, try reselecting the same Format of the region and also the language of the system itself.

    More information:

    Pay help, add maps of Apple - Apple Support

  • Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

    Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

    Hello...

    Force restart your iPhone > press on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

    Then try to add a card again > define and use the Apple pay on your iPhone

    And make sure your bank / card is accepted for use with pay Apple > Apple pay participating banks and store card

  • Could not add Card - Visa

    I tried several times to access the functionality Apple pay on my iPhone 6 s. Whenever I try to add my card it warns me that it "cannot add Card '. I'd appreciate a lot any idea on this. Thank you!

    It may be that Wells Fargo Debit card is not supported, but you can view this document of support for interventions. Get help using Apple pays - Apple Support

    The last step is to contact your bank for assistance. They can tell you whether or not the particular card is supported.

  • Store changed from the United Kingdom to China using my old zip code. Now cannot get back. Payment type is NONE, but get requests by charging to add card details.

    Store changed from the United Kingdom to China the other day using my old zip code. Now can not return to the United Kingdom. Payment type is NONE, but get requests in billing add card details that they are not everything. Postal code is changed back to UK. Phone is iOS 4 s 9.2.1. Any ideas how to get back?

    Hi Sandyback,

    Thank you for your participation in the communities of Support from Apple.

    I see that you have changed the country associated with your Apple (iTunes Store account) ID, and now ask you to provide a method of payment. This happens when changing the country on an existing Apple ID, according to why I can't select None when I change my Apple ID payment information?

    If you have changed your country or region

    When you change the country or the region of an Apple ID, you must provide a payment method and update your billing options. If you want to delete your payment method after you change the country or region, you can change your payment information to none.

    You will not be able to see or select the no payment option for one of these reasons. If you don't want to use a credit card, you can use another form of payment, for example, a gift card.

    Sincerely.

  • Cannot add cards for Apple pay to watch

    I tried to follow the article online to add features Apple pay to my watch. However, within the app shows, navigation to the notifications of shows only 'wallet' is 'mirror my iphone' or 'custom '. There is no option to add maps.

    My phone and watch running the latest OS so much my watch has an access code.

    Hello

    You browse currently notifications setting to pay Apple on your watch.

    In order to add cards to pay Apple on your watch, instead:

    -On your iPhone, in the application of Eve, go to: Watch My > scroll down and tap on portfolio & Apple pays.

  • want to add photos from the computer memory stick or sd card

    Can't seem to find how add my files on computer images to my SD card stick or the unused memory before MemoryStick only seem to be able to transfer pictures to the computer not add them to the media or card stick

    Can't seem to find how add my files on computer images to my SD card stick or the unused memory before MemoryStick only seem to be able to transfer pictures to the computer not add them to the media or card stick

    ===============================================
    Insert the SD Card/Memory Stick in your reader of media and go... Start / computer.

    The drive should be recognized as one or more removable disks and
    each will have a drive letter.

    Example:
    Removable disk (e :))
    Removable drive (g)
    Removable disk (h :))

    Left-click each removable disk until you reveal the directory root of the SD.
    Card/Memory Stick.

    OK, now that you know the letter of player if you click right one selected
    Group of photos or an entire folder, you should be able to choose... Send to
    /
    Removable disk (? :))..) .This must copy the photos to the SD Card/Memory Stick.

    Make sure that the photos in a folder because the number of photos you can copy
    the root directory will be very limited.

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Windows Media Library won't add files from an SD card to the library

    I have a sd card in my tablet with windows 7 Windows Media library will not let me add folders on the map of the ad to the library because it is a removable device - real proplem? / Thanks Jeff

    No guarantee, but the following article may be worth a visit:

    Add the removable drives not supported to Windows 7 libraries
    http://www.Lifehacker.com.au/2011/04/Add-unsupported-removable-drives-to-Windows-7s-libraries/

  • Integrated sound card failure. Will be BIOS let me add a sound card into the PCIE slot?

    Edge sound card failure, locking systematically all, (Yes, I've updated all the drivers, codecs) so want to put in the new sound card. BIOS let me add a sound card into the PCIE slot? (although course after the ReakTek onboard sound disabled) I don't see the option to choose PCI or PCI-E in Setup (F10 at startup) screen for audio.

    Pavilion a6200t office, Windows7 SP1

    System Board is Lancaster8 1.04, BIOS 5.18

    Hello! Yes, it will let you install a his own card, as long as you have a vacant home

    spacechild

  • P7 - 1447c: Add card PCIe NIC to the 1447 c Pavilion

    I'm having problems with the ethernet on my desk 1447c and I'm wanting to add a NETWORK card in the hope that this will solve the problem. Are there problems adding a PCIe NIC card on the 1447 c?

    Hello

    It has a few free PCIe connectors, you can add a NETWORK card and don't forget to ask a driver or at least where you can get its driver.

    Kind regards.

  • Add card serial port of the Optiplex 780 desktop

    I have a refurbished Dell Optiplex 780 compact desktop computer.  I would like to add an inexpensive PCI card that has two serial ports RS-232 legacy.  The description says that it is a "PCI to serial port card".  He mentions "for 5V PCI slot only."

    I think the 780 will take this card, but I'm not well versed on the specifics of the new PCI standards.  This card will probably work?

    Thank you

    Jan

    Typical PCI cards have one or two notches, according to voltage signalling. Cards requiring 3.3 volts have a notch 56,21 mm from the rear of the card; those requiring 5 volts have a notch 104,47 mm of the rear plate.  Universal PCI cards have two notches to allow them to be plugged into two system 5 v or 3.3 volt slots.

    According to the Manual, the 780 has PCI 2.3.  PCI 2.3 supports 5 volt cards. Your slot machines are probably universal whereas they should accept a card with the notches or both. But be sure that

    An important point is that the map you saw is low profile and full height. The manual said that 780 office accept "without editing card - up to two low profile cards. If you need to pay attention to the voltage more than just.

    And the desktop version does not have a PCI-e x 1 slot, which means you need to find a PCI card.

    Another alternative could be a USB > serial adapter cable.

  • Add card USB3 to xw4600

    Is it possible/wise to add a USB3 card to the xw4600 workstation? Your opinion on this would be greatly appreciated.

    Dianne

    Amelia, welcome to the forum.

    I think that it should be possible.  Here is a page showing the PCI expansion slots in the workstation.  You can check what slots are available.  Then you can buy the appropriate card.  For example, here is a PCI Express x 1 card of HP.  She would lie on the #1 slot in the diagram.  Of course, it should be available.

    Please let us know if this solved your problem or not.

  • Hi there, was trying to download Adobe elements 13 but there is no facility to add information to the card at checkout

    Hi there, was trying to download Adobe elements 13 but there is no facility to add information to the card at checkout

    Hi Gavin,

    Please try to buy the product from the link below:

    Photo editor, photo editing | Adobe Photoshop Elements 13

    Hope that helps!

    Kind regards

    Sheena

  • This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

    I tried to connect a new TV to my 8700 with HDMI and I get this message:

    This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

    1. power off the computer
    2. plug the cable from the monitor into the graphics add-in card connector. This may require a video card or the video adapter cable.
    3. turn on the computer

    I unplugged from the back of the computer and put it in my drive macbook & blu - ray. Both worked.

    I tried to find a solution to this already, but none really helped.

    Thank you.

    You need a video card, not the port on your computer HDMI connection:

Maybe you are looking for