Similar Questions

• SCXI-1581 reading bad weather

  Hello

  I'm an intern summer and I'll try to find some help with the SCXI-1581 module. We had a major failure during the test of an engine and it damaged some of the test equipment. We have replaced all that appears to be damaged and tried to restart the test system. Everything worked fine except for this add-on. I use a 100ohm RTD to test the different channels and I get a constant temperature of evil. Instead of the ambient temperature from 26 to 27 degrees Celsius, I myself am-243 degrees Celsius-244. It seems as if there could be a scaling factor that is causing temperatures to record these low values.

  As part of my process of troubleshooting, I took the module SCXI-1581 the machine damaged and replaced by the same module from another machine. Temperature readings read correctly for all channels that I tested. Then I took the right module and put it back in the machine to work and he still read appropriate temperatures. With this small made check I took the bad module and placed in the machine to work and ended up reading the bad weather. At this point, I had concluded that the module must be bad and replaced the good module back into the machine to work. As a final check, I tested again temperatures and good module is reading the same bad temperatures as another module.

  I have trouble believing that mearly placing bad module into the working machine was sufficient to damage the good module as well. So my question is, is it possible to adjust the scale factor or the SCXI-1581 module needs to be replaced? Is there something else I can do for these modules work?

  I can not provided enough information, and for that I apologize. I'm not familiar with this equipment at 100%, but I'll do my best to provide additional information that may be required.

  Thank you

  Thanks for the reply.

  My boss and I looked into it more and found the two cards to work very well. The error was in the RTD that we use to test the card.

• Cisco 6921 - BE3000 - new DHCP server

  Hello

  We have little phones Cisco 6921 currently registered with our BE3000 CUCUM.

  We have migrated to a new server DHCP AD, but having some problem with phones that are powered off and on again. they don't just with the new DHCP server. CUCUM can ping and connect to the DHCP server, but phones that are restarted, have no chance. The phones were left turned on, work correctly.

  any idea what needs to be changed/tested?

  Thank you very much

  Ally

  The forum needs a "I answered my own question button" LOL

  

• TV 39l4333DG - bad weather in CLOUD services

  Hi all

  In my Toshiba 39l4333dg, the weather is bad (an hour earlier than the current time). I guess it had something to do with time (DST) changes that have occurred lately in Poland. I tried to reset the TV but it didn't work.

  You have a solution to this problem?

  It's really confusing, because some toshiba cloud applications use the set time in the TV to determine whether some vids can be broadcast.

  What version of Cloud? Could you pls post the cloud-ID of your game (pls use PM).

• Import of Citadel to tiara Gets the values of bad weather

  I installed a data store and pulled in the variables of storage in a Citadel 5 database. 99% of the data is very good. I wrote the data in the base of the citadel in a Labview program with writing trace vi. Now all data stopped and started it has a value of 0 for the gage, and reads the timestamp '? /?? /???? ??:??:??.????." I tried to delete these bad data with the function "No. Values", remove, but it failed.

  The dataset is 4e6 lines long, is not reasonable to do it by hand. Any suggestions?

  Hey gpburdel,

  Yes, you will need to run a VBScript script, but at least it is a simple VBScript:

  L1 = NOC ("H10G4_lvdt.time")

  Call FormulaCalc ("Ch (L1): = Ch (L1) + NoValue * (Ch (L1)")<>

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• When I have bad weather I lose my connection several times

  When there is a storm passing (on me or nearby) I lose my connection several times during the storm. I have Verizon DSL. Military have been repeatedly here, check my connections, connections to the outside on the poles, but never nailed the problem. They even ran a direct homerun to my DSL router/modem. Also during the game (UT2K4) my ping shot up to 988 several times. It gets very frustrating, especially when Verizon can't find something wrong. I'm the only one on this line. I have DishNetwork hooked to a modem, I think it is called Sling. Wi - Fi from the receiver to the Slingbox, then the Ethernet cable to a router/modem. May - so that it affects my ping? The router/modem would be bad? It's a westell 327W. I have a connection of Meg 7.

  If you connect your PC to your router/DSL modem via a wired connection and disconnect all other devices (wired & wireless), it would help narrow down if the problem is with your DSL service for your home or something in the configuration of your home. If your connection is OK like this, add devices to your LAN setup one-at-a-time to try to work out which one is causing the problem.

• bad weather direct display of the app city

  Hello

  My hometown is Sydney, and it is updated in the weather application.

  For some reason, the direct application is showing me in Canberra and Sydney not.

  Canberra is not yet listed as a city in my application.

  Help, anyone?

  I hate windows 8 so it is unbelievable.

  In this case, I would set your city directly instead of using the automatic detection of your location.

  1. Click on 'Change Home' at the bottom:
     
  2. Type "Sydney" and choose it from the list:
     

  Now, it will show Sydney for you.

  Also, if you hate Windows 8, go to http://cmdrkeene.com/r/WindowsH8 how to set that works as Windows 7 instead.

• IPhone 5 c bad weather after that I dropped it.

  I dropped a few months ago and I have tried a lot and read a lot of things but I don't know what to do.

  I turned it off auto time and together than to the right but it always slows down and custom travel 10 minutes for about 4 days. What can I do? Dislodged something in my phone?

  I know that sounds stupid and I regret it completely but frustrated I he fell on the tiled about 4 times on the side to fix (I know im stupid, that I was so angry at the time because of family problems on top of my phone does not)

  Would have dropping me much caused other problems? The screen is cracked but I can get repair.

  Thank you

  Hello

  Contact Apple support (mail service may be available) or make a booking Genius Bar to get your verified iPhone and establishing your available service options, costs and likely delays:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

• Captivate Demo 7, make a pause as if backup automatic in very bad weather

  Hi all

  Any program of captivate for the first time user, please bear with me

  I use the demo in the meantime my company to install the licenses for my permanent use.  My question is that Captivate will pause as is the automatic backup and then moves.  This is a nice feature, if I really want, but I do not have, and it does in the middle of video capture. This is a major problem when I do the operation of software capture and Captivate decides to take a break, but my software I capture does not work.

  Any ideas on that?  I looked in preferences, but does not see where I can cut autosave, if it's really an AutoSave.

  Thanks for the help in advance

  Richard

  Hello

  Please check the response of Suresh Jayaraman on this thread. This could be the cause of your problem.

  http://forums.Adobe.com/message/5729996#5729996

  Anthony

• Satellite 4030cdt: after installing the battrie CMOS: bad time function

  I brought some new included cmos, since I installed them I get a message came: function of the bad weather.
  Can anyone help please?
  There is no operating system installed, although it does not start from floppy drive or a cd.

  Thank you

  Hello

  After CMOS battery changing the BIOS, the settings are removed.
  I would recommend to get into the BIOS, and there you can find the option for the date and time system.
  Try to set a right time and save your changes.

• vSphere bad Date and time

  I have restarted our guests 2 1 last night. I entered in maintenance mode and migrate virtual machines on other host and everything seems to restart very well. I came this morning I logged in our desktop manangement and noticed that all of our virtual machines have been the host rebooted, turned off. I powered on each virtual machine and a couple of them migrated to another host.

  Now, when I have set up a virtual machine on that host rebooted, under recent task, it's show on 13/07/11 and bad weather. The management workstation and all virtual machines seem to have the correct time, but not of vSphere.

  Any thoughts?

  "Note: year ESX host with the wrong date and time or zone transmits this erroneous information." "When a VM initializes it seems to get its initial time of the BIOS clock that comes from the ESX host.

  Watch http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1436

  Please, do not forget the points of call of the "useful" or "correct" answers
  

  
  

  Mauro Bonder - moderator
  

  LinkedIn Facebook
  

• Using the UCCX Editor

  Hello everyone, I am new to UCCX scripts and I was responsible for a new project like this, and I'm stuck.

  I need to create a position that when called will ask the user if there is bad weather or not, if they can hit 1 then coming to this variable in a txt file. Then, I need to have a UCCX script that monitors this txt file and if she sees the State = 1, it will then run a script that will trigger a message indicating that the weather is bad we are closed and also make calls from phone to a few customers to let them know all the bad weather and the trucks could be delayed because of this. I've been using proposed scripts, I found in any other place in the forum, but nothing helped. It's user error more than likely. Help, please.

  This has been covered many times on this forum, however, the reason for such a solution always sems to be different: closure of emergency, meetings, status, etc.  Basically, as a new admin, it would have been very difficult for you to know what to look for.  I feel your pain, when you're so new to something, you don't even know the right key words to enter to get help.  This is why I'm glad that you posted your question.  I can help you.

  You will need a script to manage the evolution of the weather situation, let's call it is the weather situation IVR (WSI).

  Weather situation IVR

  Summary

  This IVR script will answer the call, ask a form of authentication information, and then play the current state of the weather to the appellant, followed to encourage a change in the status.  We will need a script, a few guests, a text file format and a mechanism of authentication.

  Script

  Variables

  String caller_input = ""
  User auth_user = USER[uccxadmin]
  Seting current_status = ""
  Document weather_status = DOC[weather-status.txt]
  

  Script

  Start
  Accept (-Triggering Contact--)
  caller_input = Get Digit String (--Triggering Contact--)
  Successful
  Timeout
  Unsuccessful
  Authenticate User PIN (auth_user, caller_input)
  Successful
  READ_STATUS:
  Set current_status = weather_status
  Switch String (current_status)
  1 - Rain
  Play Prompt (--Triggering Contact--, P[weather-rain.wav])
  2 - Sharknado
  Playt Prompt (--Triggering Contact--, P[weather-sharknado.wav])
  Default
  Play Prompt (--Triggering Contact--, P[weather-normal.wav])
  WEATHER_OPTIONS:
  Menu (--Triggering Contact--, P[weather-options.wav])
  1 - Rain
  Set curent_status = "1"
  2 - Sharknado
  Set current_status = "2"
  0 - Normal
  Set current_status = "0"
  Timeout
  Goto WEATHER_OPTIONS
  Unsuccessful
  Goto WEATHER_OPTIONS
  Upload Document (TEXT[current_status] to L[], "weather-status.txt")
  Successful
  Delay 3 sec
  Play Prompt (--Triggering Contact--, P[changes-saved.wav])
  Goto READ_STATUS
  Unsuccessful
  Unsuccessful
  End
  

  Guests

  The guests are prepared in the example above, how much and where you put is really up to you.

  Document

  The document you need is a simple text file.  You need it download first of all, otherwise, you will also need to build in some exceptions for when your co worker accidentally deletes the file.  Also note that I use the default language here, because it wouldn't be fair for Spanish speakers if only the English language has received weather alerts.

  File name

  weather-status.txt
  
  

  Content of the file

  0

  Authentication Mech

  I've included one way authentication of the user so that you can download the documents. Is to use a system account and you will have to know the number of PINS.  I have a document that talks about a few other methods here: https://supportforums.cisco.com/docs/DOC-35433

  Then, you need to change your exsiting script to read the value of the certificate of status of time, and then, under condition to do something based on its value.

  An existing Script

  Summary

  I will only focus on the parts that you need to add to your script, and I'm going to assume a moment, the only action you want to take is to inform the appellant of the doom headed their way.  You place in your script, it's up to you.

  Script

  Variables

  String weather_status = ""
  Document weather_data = DOC[weather-status.txt]
  

  Script

  ...
  Set weather_status = weather_data
  Switch String (weather_status)
  1 - Rain
  Play Prompt (--Triggering Contact--, P[weather-rain.wav])
  2 - Sharknado
  Play Prompt (--Triggering Contact--, P[weather-sharknado.wav])
  Default
  Play Prompt (--Triggering Contact--, P[weather-normal.wav])
  ...
  

  And that's all.  I hope this helps.  I typed all this on top of my head without having everything that was actually going through a validation test.  I will review my post for typos and errors in a minute.  But please use it as a guide, not to rule.

  Anthony Holloway

  Please use the meaning of the notes to help the great content in car to the top of searches.

• HOWTO specify the zone on UCS C220 M3 by CLI

  Hello, I have configured NTP in the GUI, but bad weather due to a time zone is not OK

  I can't change the time zone in the GUI, so I looked for some CLI commands.

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/SW/CLI/config/Guide/1-3-1/b_CLI_Config_Guide_1_3_1/CLI_Config_Guide_1_3_1_chapter33.html#task_A14B792FD20A458E8990E93368F5B222

  According to this article, it should be possible to use the system to scope, but this command is not available in my CLI:

  BKS-C220-FCH1743V1FY #.
  commit the changes to batch validation
  connect to Connect to another console
  discard discard all changes
  out of the shell
  scope changes the current mode
  set property values Set
  view the system information see the
  top of the page to go to higher mode

  BKS-C220-FCH1743V1FY #.
  BKS-C220-scope FCH1743V1FY #.
  BIOS system BIOS: Basic Input/Output System
  certificate of security for SSH & SSL certificates
  Chassis server items in stock
  MMIC Cisco Integrated Management Controller
  Configuration of alerts on the platform event/fault fault
  Protocol http Hyper Text Transfer Protocol
  IPMI Intelligent Platform Management Interface
  console keyboard video mouse KVM to host
  LDAP Lightweight Directory Access Protocol
  salt of the system event log
  sensor sensors
  SNMP Simple Network Management Protocol
  ground Serial Over Lan (console character of host mode)
  SSH Secure Shell Configuration
  local users of the user of this CIMC
  sessions active user of user on this MMIC session
  VMedia Virtual Media (local media on the host mount)
  xmlapi Configuration API XML

  BKS-C220-scope FCH1743V1FY #.
  % Incomplete command
  BKS-C220-FCH1743V1FY #.

  How should I change the time zone?

  Hello

  Unfortunately you have checked a guide old enough to UCSM 1.3 (we went through UCSM 1.4/2.0/2.1 and currently on 2.2 already), and that server you are trying to set up seems to be offline...

  For a stand-alone server of series C, only 2 how time management is in the BIOS or Setup NTP (counting 1.5 MMIC) but not their time zone.  See the screenshots attached.

  If you join the server with UCSM then you can configure the time zone.

  -Note ALL useful answers

  -Kenny

• Photos and iPhoto Library - transfer both?

  Hello. I'm trying to transfer my library of Photos on an external hard drive to free up space on my Mac. I noticed there is a huge iPhoto library in both images and don't know what to do with it.

  I'm running OS X El Capitan 10.11.5 and was completely out of memory. I already reformatted a WD My Book, 3 t in the correct format and am currently uploading Photos.  My question is, I need to transfer the iPhoto library as well to keep the Photos work properly? I have read conflicting information. It seems that they may share data and deletion of iPhoto could damage the library?  iPhoto is GB 336, Photos is 447 GB.  I have space for both but prefer delete the iPhoto library rather than transfer if that's for sure. He said also, photo transfer will take 4 days and I do not want to make twice as much...

  Separately, I also have a small external hard drive, I moved a partitioned iPhoto library to several years ago. I used iphoto Library Manager software. I have pre 2010 photos out there and no where else other than a backup hard drive. Remove the iPhoto library on my computer effect my ability to use the one partitioned? I would like to merge all to a library of Photos now that I have the space.

  Any advice would be appreciated. Thank you!

  Yes and no

  There is no connection between the photo library and the iPhoto library - you can move or delete without effect on the other - don't know where your found contradictory information but there is no link between them

  However, if you move one and keep the other won't save you any space - you must move both to save space on your Mac - if you are sure you are finished with the library of th eiPHoto, then you can simple delete it, but it is advisable to keep a copy of archive of it to the case where

  And don't forget that the EHD must meet these requirements-must be in Mac OS extended (journaled) connected via a wired connection format fast as ThuderBolf, FireWire or USB, not used as a backup volume Time Machine and always available before pictures being launched

  And the copy of the library (if you have the good fast wired connection) will not take 4 days - the finder is an estimator of bad weather

  As for the separate iPhoto library again once there is no link between multiple iPhoto libraries - and there is no way to merge them after their migration into Photos (you can merge the iPhotoLibrary Manager iPhoto or Aperture libraries and you can add pictures to a photo library to another) you can migrate the second iPHoto library by dragging it to the Photos in the Dock icon - PowerPhotoscan merge the masters previews in another library and PowerPhotos can be continued to display the two libraries

  LN

• change time zone

  I recently moved to Europe with my Airport extreme router.  I had it set to the time zone IS in the USA.  Yesterday, I put the schedule on the network to block WIFI durning the night time.  We are 6 hours in front of the USA (EST).  Thus, the WIFI didn't work all morning, and at 12:00, it launched on!  Not what I wanted.  I had initially put down to 22:00 and turn it back on at 06:00.  It must have exploded about six hours later and did not come until noon.  I fixed it by setting my time of 6 hours.  I can't find a way to update my Airport Extreme and set the time to a correct time, or update the correct time zone.  Will this be updated one day and then leave me with the bad weather again?

  I read that you used to be able to set the time or the time zone, but some update in the past has changed, and it is no longer possible.  So, what do you do if you move to a new time zone?  I know that it probably affects a small amount of users.  Is it possible to see what the time is actually set on the Airport Extreme?  I'm still scratching my head about it.  I appreciate all help.

  SrMac777

  Will this be updated one day and then leave me with the bad weather again?

  Yes, it will be.  6-8 weeks or so is about average for AirPort Extreme know where it really is.  The Apple servers automatically updated things... no controls for this user.

  If your Mac has right now, some users have reported that the reset of the router airport back to settings by default and then set up again has updated the time parameters for them. This has never worked when I tried well.