UCS c220 cicm sees new SSD, cannot put them into shape or perform any other task

Similar Questions

• my site is using dreamweaver cs4, I can copy all my and put them in dreamweaver cs6 without any problem?

  my site is using dreamweaver cs4, I can copy all my and put them in dreamweaver cs6 without any problem?

  The simplest way to use CS6 on a former site of CS4 on the same computer would be of...

  1. open CS4 and choose Site > Manage Sites

  2. Select the site and choose export

  3. This will create a your site settings .ste file (no site file is stored in this)

  4 close the CS4 and open CS6

  5 CS6 hit Site > Manage Sites > import to bring these parameters from the .ste file

  This will give you the same exact settings (FTP and otherwise) of CS4 in CS6 while using the same files the.

  If you use another computer together, you will need to make a copy of your local site on the new machine folder, and then export/import the .ste as above with an extra step possible Reassociation the local site on the new machine folder, if the structure/location of the file is not the same between machines.

• New SSD - cannot go beyond the login screen.

  New SSD put in place successfully in the MacBook Pro (mid 2010) 10.6.8 OS. Cloned SSD as boot drive, but do not yet installed inside the case.  I used this drive with success for a few days.

  Then yesterday with finals and Firefox running, Firefox has suddenly closed and MBP had only limited functionality.  I tried to reopen Firefox, but the error message said it was already open.  I tried to open 'Force Close' to see if this was true and maybe close it there before to continue, but when I click on the Apple, I got a blue screen, then my normal screen, with icons to come 10 seconds later.  After trying many other things, I had to make a difficult stop (by holding down the power button).

  I rebooted, entered my password at sign-in, but then, instead of proceeding to my normal screen with background, icons, etc, I'm a blue screen which finally rolled back to my login screen.  Then, I entered my password (it IS correct) and the same process happened (repeated 10 times just to be complete).

  I did NOT use the function 'Trim', which I read it, but don't know what it does or how to start it, or it could solve my problem.

  Don't know what to do now.

  keysguy9 wrote:

  I did NOT use the function 'Trim', which I read it, but don't know what it does or how to start it, or it could solve my problem.

  Don't know what to do now.

  TRIM will not solve your problem.

  With Snow Leopard, you may need to reinstall the version of this OS supplied with your system; then update 10.6.8. Reinstalling the operating system will not damage your data or applications. But, you must back up your data, if you can, on your external SSD before reinstall OS X.

• Adding synchronization to my new computer cannot me sync with my account on my other computer.

  The window to add information about synchronizing with my existing computer has 2 buttons - add a new account - and - I have an account-. The Create button again will respond, but since I already have an account that did not help. The button "I have an account" will not answer. Touch screen finger or stylus and highlighting the button and using the key "Enter" all have absolutely no effect. I deleted Firefox and reinstalled but still exactly the same. My OS is Windows 8.1. Any ideas on how I can take this form d...d?

  Mode of contact if you have the metro market. Try to click with the right button on the link and open it in a new tab. Or you can manage the account in Firefox > Options > Sync
  Unfortunately Metro will continue, but it should normally out of touch mode.

  If nothing appears in the error Console? When you click on the link?

• Generate a Certificate Signing Request on UCS C220 M3 running MMIC 1.5 (4th)

  Hello

  I have a couple of servers UCS C220 M3 and to install certificates on them.

  CA will not issue certificates with a 1024 module that seems to be the default created when generating a signature request using the GUI. The GUI I cannot put the module to a higher value.

  I searched in the CLI, but it doesn't seem to be an option to do here.

  The CLI guide said that there should be an 'extended security' cli command that would allow me to do this, but it is not present on my server of series C, so I think it might be available on the B series servers?

  Anyone know if it is possible to change the module to 1024 which generation CSR on this model of server?

  Thank you

  See this thread for more information - it has developed recently:

  https://supportforums.Cisco.com/discussion/11664446/importing-CIMC-SSL-s...

• Installation of El Capitan on default of new SSD

  Hello

  I'm trying to upgrade my MacBook Pro (15-inch, mid-2012), install a new SSD and run the operating system on it.

  Here's what I did:

  I bought the 'OWC Mercury Extreme Pro 6 G' with a cube of data. I removed my optical drive; installed my old HD (running the operating system) in the data Doubler; and install the new SSD in the main Bay.

  I downloaded El Capitan of the 'App Store' and then used «DiskMaker X 5 "to make a bootable usb key.»

  Restarted my computer laptop and booted from USB and the installation of El Capitan. From there, I formatted the new SSD (Mac OS extended (journaled) with a single partition GUID).

  After running down the clock of the installation (about 5 minutes), I get the message "an error occurred during the preparation of the installation. Try to rerun this application".

  Without having to restart the mac, if I try to install the OS again, I'm not able to find the SSD.

  If I restart the laptop and start in the OS on my old HD, I'll find the SSD here on my desk. (Sometimes it take a couple of reboots for my Mac see the SSD).

  And then I try all this again, with the same results.

  I tried other things:

  Reset the PRAM.

  Manual clock setting in the Terminal since the installation of punt. (Although it was not bad in the first place)

  I also tried to set the clock to AST (Arabia standard time) as I live in Saudi Arabia.

  Other than my SSD is defective, any ideas on what can I do to solve this problem?

  Hi Blackcells:

  I guess that you entered in "System Preferences" > "Startup disk" and set to your original drive data Doubler.

  

  Try to remove your new SSD and put it in an external case OWC external box or using a USB to SATA adapter SATA USB adapter and connect it to your MBP via USB.

  Open disk utility > delete and format the SSD for Mac OS extended (journaled) and a GUID partition.

  Then, use a third party application like Carbon Copy Cloner Carbon Copy Cloner (not free, but worth the price) or Super Duper to copy all data from the HARD drive internal as well as the recovery partition.

  The clone will be an exact copy of your hard drive and it will be bootable.

  Start the MBP with the OPTION key and select the new SSD.

  If it starts the MBP, proceed to the physical interchange of disks.

  Kim

• How to install Windows 7 on a new SSD, Dell Windows 7 DVD

  I have a new SSD for my workstation Precision 7510.  I need to install windows 7 on it from the DVD provided by Dell.  The DVD has no drivers and so when I try and install, I get a message about "the installation media does contain not all drivers" and the installation will not allow me to continue.  Keep in mind that my new SSD has no partition recovery or in fact any partition.  I have a drivers Cab file and I also have this unpacked on a USB key, but it does not appear as a disk when I "Browse".  Neither the new SSD - t - there no partitions...

  Do I need to format the SSD drive first?

  Could someone tell me where I can get the drivers and all that forms, they must be in?  In other words, I need to burn it to a DVD, and what would the structure of directory?  Do I have to download all the drivers separately - there are a number of EXEs on the support site, or can I use the Dell Enterprise site CAB file?

  I tried various things now since a few days and I'm losing my grip on reality :)

  Thanks in advance.

  See here:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/downloading-preparing-and-loading-SATA-drivers/

  Use this driver:

  http://downloads.Dell.com/FOLDER03294962M/1/Serial-ATA_Driver_KV87W_WN64_14.6.1.1030_A01.exe

  I would also advise to convert the DVD to USB with USB 3.0 support:

  https://www.YouTube.com/watch?v=lg8Oebhc3EI&list=PL1RkaknDn7v82tfEmxGgycwJJvJ0xGoqZ&index=2

• What programs are getting extract comments and keywords and put them in the labels and captions in Picasa?

  What free programs I would like to extract comments and key words and put them into computer-based labels and legends Picasa? Is this possible with MSVB 2008 or 2010 Express? I'm not a real programmer, but I can hack a bit (in the old sense of the 1980s the word hack). I tried searching internet but no combination of the words comment, tag, keyword, and legend get something usable. Too common words, everything matches. BTW, I use XP, cannot afford to Windows Vista SE (that's my name for 7)

  What I want to do is to add tags and comments to the photos that I am scanning. It is a long-term project to archive all the family of the peaks. Some dating back to 1900 photo of great great grandparents. The key here is long-term. I thought that the properties/summary/comments (and keywords) would be likely to be on board for many years (legacy stuff). Jac I can't find any program that uses or leans on them today! And I just saw a pic of the Win7 properties and guess what? No summary! Picassa is quite widely used but who knows. Nothing is stable for a long time. Can not even get to diskettes and CDs and cassettes now become more difficult to find. And DVDs are on the side too. How can I put the photos on the long term and accessible storage?

  My plan is to use Picassa and .jpg. I'll put a copy of Picassa on every DVD that I use (in data mode). I'll do a mode DVD video slide show as a backup. The disks are pretty cheap even for me. I will not use double layer, but too unreliable. And I intend to check them every few years for readability. I have a few CD that can be read even with 12 years older data recovery programs.

  So if anyone has any comments, suggestions or additions, let it go. I think that it is indeed an important subject, keeping old data accessible.

  Hello

  You can post the issue here for more information:

  https://groups.Google.com/a/googleproductforums.com/Forum/#! categories/picasa/picasa-for-windows

• How to put a new SSD in Satellite M50D-A-112?

  I had a M50D-A-112, and I want to put a SSD HD, instead of the HARD disk that is in the unit.
  I have a Toshiba Q series 256 GB SSD, but I'm not able to 'open' the laptop. I removed all the screws but cannot remove the rear shield. I'm afraid to use for excessive violence do. HA someone some experience I swap hard drives in this model.

  Any help will be greatly welcome.
  Concerning

  On most laptops Toshiba, it is possible to remove the battery, RAM or HARD drive cover and do drive HARD or RAM upgrade and it can be made by the owner of the laptop. It is also described in the document s user manuals.

  Due to the special construction, this can be done with your laptop. with other words, Toshiba does not support such a change by the owner of the laptop. My advice to you is to contact the nearest Toshiba service provider and ask for help. They have manuals how this notebook must be dismantled and they can swap the HDD with new SSD. Please note: If you try to do it on your guarantee will be cancelled.

  Before you anything please create recovery media (USB) that you can use to install an operating system on new SSD.

  Bye and good luck.

• Toshiba Tecra S3 - new SSD stuck on JBOD, cannot install windows on it

  I just got myself a Kingston V series 64 GB SSD drive, but I can't it is detected by windows installation programs.
  After looking around, I found that the Tecra S3 drives must be "1RAID 0" and not JBOD to activate windows to
  be installed on it. (unless you use the recovery CD, which I did not right now, even if I wanted to use it)

  I also found the "collar" necessary to get the BIOS to change when you get to 'run the creation '.
  is 1,2,3,4, [Enter].

  But here's the catch: + BIOS does not account for the string... +.
  I type the string, 1234, [Enter], and it cancels my desired, change as if I said NO and set it to JBOD.
  (if I don't type the string on the right, it comes out, but stays 1raid0 and "run the creation" is still there)
  I tried on one of my other drives and it worked fine, but for some reason this drive seems not wanting me to.

  I tried the USB drive (works fine) and the BIOS sees it for what it is, so that the drive works well (from my tests)

  Would be really appreciated any ideas on what to do now, I'm out of ideas on what I did not properly
  Thank you!

  Hello

  > I just got myself a Kingston V series 64 GB SSD drive, but I can't it is detected by windows installers

  Have you included the RAID driver in Windows before you tried to reinstall the OS?
  On the European driver Toshiba page, you can find the RAID driver to be included when installing Windows installation.

  Regarding the change in BIOS RAID;
  I m not very good, but it might be possible that you cannot change the reason the SSD RAID option.
  If other drives are working properly and that the RAID may be changed using a common HARD disk the problem is related to the new SSD drive.

  Maybe you need to update the firmware on the SSD drive to check it out.

• E540: Dolby Advanced Audio v2 cannot be installed on the new SSD

  Hello

  the Dolby Advanced Audio v2 question keeps grinding my gears. The situation:

  I added a second drive (SSD) successfully to the E540, everything works and is configured correctly. I still have the disk original in place and achieved 8.1 Windows (x 64) installed on both drives. However, I can't run Dolby Advanced Audio v2 when starting Windows Setup (fees) on the SSD. Just after starting, or you try to start the application, there is a Windows error message telling me that the Dolby-driver cannot be executed, and I have to reinstall the application if the error continues to exist.

  When booting from the original HARD disk there is no problem with Dolby Advanced Audio v2, the application works very well. Every time booting from SSD error message appears.

  I know that it is a known problem and I read all of the information that is out there on the internet. I tried uninstalling and reinstalling the DRIVERS on C: several times record, everything was installed in orders different and tried almost all of the combinations use the audio CONFIGURATION, Setup in DOLBY, the UIUa64 and so on. I can't install correctly Dolby Advanced Audio v2 on the new SSD. The installation ends and Dolby Advanced Audio v2 is displayed in the list of installed programs, but at the end of the installation, the error message also occurs.

  (I followed exactly the solutions reported for other systems, but none of them worked for me. Please tell me in what order I should run the driver setup (s) for my E540 if you think that it is a source of possible error).

  I don't really know what could cause the error during the (apparently) accurate installation still work when starting from the original HARD drive? I would really really appreciate advice that could help me solve the problem.

  See you soon

  (PS: I speak not of Dolby Digital Plus, but Advanced Audio v2!) The Dolby Digital Plus the user interface is available on the SSD. The sound quality varies considerably between the two installations of Windows on the SSD and HARD drive and the loss of sound quality is unacceptable for me.)

  I found the solution to my problem in this thread:

  https://forums.Lenovo.com/T5/Lenovo-3000-and-essential/how-to-change-FOM-Dolby-Digital-Plus-interfac...

  Didn't think to try the Win8 pilot... my bad, but I hope this helps others.

• Cannot configure RAID on UCS C220 M4

  I'm trying to setup a new M4 C220 however the option press to enter the WebBIOS RAID never appears.  I also went in MMIC and the only options in there set up RAID 0, 1 or 10 However, we want to use RAID 5.  I tried to reinstall my readers and my RAID controller.

  Hi Cameron

  Which option RAID you bought?

  Is based on the RAID card, you can only create RAID 0, 1, 10

  http://www.Cisco.com/c/en/us/products/servers-unified-computing/UCS-c-SE...

  See Cisco UCS C220 M4 Rack Server Data Sheet

  Modular Cisco 12 G SAS RAID controller
  You can choose the Cisco 12 G RAID SAS controller, which plugs into a dedicated RAID controller card slot. This RAID controller supports RAID 0, 1, 10 (without option FBWC) and supports up to RAID 0, 1, 10, 5, 6, 50, 60 (with FBWC option).

• UCS C220 M3 - cannot install Ubuntu 14.04 OS

  Hi all

  I'm new to Cisco servers and we bought 3 servers UCS C220 M3.

  For one of them, I would like to had installed an operating system Ubuntu (14.04). I tried hard but unsuccessfully to install the operating system on the server.

  On this server, I have only one physical hard drive, because I'm not really interested in getting the RAID on this server. Initially, I started on a USB with Ubuntu image and installation worked fine. Then, I tried to boot from the hard drive, but it was impossible to find the hard drive in the boot menu.

  You have no idea about it? I suspect that this is because the RAID of LSI sotfware controller is enabled and one thing to note is that I have not installed FlexFlash Cisco's SD card. Is - this mandatory? When I try to configure RAID 0, so I'm not able to install ubuntu (impossible to detect the drive with the Ubuntu Installer).

  Thanks for any help!

  Alex

  If you set the UCS SW storage battery in AHCI mode, Setup see your local hard drive then?

  What is the hard disk that you installed? Depending on whether you install a 32-bit or 64-bit OS and size of the disk you are installing, it may require that the UEFI boot options.

  Please see https://help.ubuntu.com/community/UEFI for Ubunto UEFI install help.

  If you have an installation ISO that you used to create the bootable installation USB, you might want to consider editing than the ISO via the virtual KVM, on the tab of the VM and begin your installer in this way.  This will require that a compatible version of Java to be active in your browser.

  If you do not have a longer boot disk 2 TB, you might want to consider to keep everything in legacy bios mode and avoid the complexity of UEFI which can sometimes appear.

  For drivers, these will actually be the C600 Intel or Intel AHCI drivers (depending on the mode you're looking for).

  See the Readme in ucs-cxxx-drivers.2.0.8b.iso\Linux\Storage\Intel\AHCI\Ubuntu\14.04\ AHCI driver said that the ahci driver is already provided with the operating system...

  I must stress that for Ubuntu, I see not all versions or versions of firmware that have been officially supported for the SR on board or AHCI controller.  Please visit http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html

  Although you are able to run in AHCI mode, it is not officially test/pick-up.

  In my view, the controller AHCI/PCH 6 port included with theM4 C240 is supported in Ubunto 14.04.

  Thank you

  Kirk

• Cannot install esxi 5.5.0 u1 on UCS C220 M3S with version 2.0.1a - no network card

  Hello world

  I have a big pb installing esxi5.5.0 U1 on a UCS C220 M3S with version 2.0.1a. I get this message: no network adapters.

  I found a lot of post on the internet that say to do a custom installation CD, what I have done but without success. I also try to use the iso installation Cisco custom, with the same result...

  I have not anderstand what happen as the MMIC see network interfaces...

  Here's my hardware:

  Firmware of Intel I350 1 Gbps 0x80000AA4 network controller - 1.446.1

  Firmware Interl Server Ethernet adapt I350-T4 0x80000AA6 - 1.446.1

  BIOS 220M3.2.0.1a.0 (Build Date: 28/04/2014)

  MMIC 2.0(1a)

  According to Vmware Compatibility Guide, this version is compatible with: C220M3.2.0.1a.0.042820140020 of Cisco Systems, Inc.

  http://www.VMware.com/resources/compatibility/detail.php?deviceCategory=...

  and by Cisco Compatibility guide also: http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html

  If the ideas?

  Thanks a lot for your help.

  Concerning

  Similar situation discussed in

  https://supportforums.Cisco.com/discussion/12189941/no-compatible-networ...

  It is possible that the optionROM for the integrated card is not activated.  Try to enable it in the BIOS, you can via the MMIC (see cimc_enable_optionrom) must attached. You also want to verify that this option gets enable in the bios.
  You can enter the bios by pressing f2 during boot (see BIOS_Option_ROM)

• Updated UCS c220 now cannot access MMIC

  I've recently updated one of my servers UCS C220 with the huu Cisco 1.4 something to 2.0 (9f).  I said to all move so he just did everything that he is requiring the upgrade.  Now when I try to log into the the green bar MMIC rises, flashes and says logged on.  I rebooted, there repeatedly. It accepts my password because I can get into the wrong thing and he says username/password incorrect name.

  Has anyone run into this and found a solution for this?

  Hey Danny,

  You can SSH to the MMIC?

  Try clearing your cache of browser and Java. Also to attempt to reach MMIC from another browser. It seems that when you upgraded, all the old information of MMIC are still in the cache.

  Let me know if it works or if you're still having problems.

  Thank you

  Wes