New SSD - cannot go beyond the login screen.

Similar Questions

• Cannot go beyond the login screen

  Hello, I'm looking for help with my HP Pavilion dv7 with windows 7 Home premium I have my uncle who does not use it long. Long enough where he forgot his password and there is no guest just its accounts. So my problem one I'm trying to understand is if it is possible how can I get to the control panel or is it anyway I can create an account.

  Thank you Patrick

  Hi Patrick,

  You can use a password reset, as in the example of free utility at the following link.

  http://pogostick.NET/~PNH/ntpasswd/

  Kind regards

  DP - K

• Brand-new Satellite L300 stuck on the login screen

  Hi all
  I'm new and a little bit of a technophobe - hope you can help.

  We have bought a new laptop a few weeks ago and set it all. Seemed easy enough - is installed after turning on, logged in with the password network and we were away.

  We have 2 connections A and B put in place in this regard. My partner turned on and it came with the connection form A and B with 2 icons - he went to a click sound and he did not. No mouse is attached, we use the keyboard mouse. Tried rebooting with the button, but it's the same thing. I tried again and it has gone through a process and offered safe mode and normal mode, I tried separately on both and she returned to the login screen and click has failed.

  It is now stuck on the battery mode, because we can't get past this screen and it to run properly. Any suggestions?

  Thank you very much.

  Would it be possible that you have disabled the touchpad accidentally and therefore you couldn't t access the Win Vista ;)?
  Please note that you can enable and disable the touchpad by using the FN + F9 key combination

• Tecra M2: Vertical lines appeared and cannot go beyond the Toshiba screen

  I was watching a movie on DVD WIN and froze my TECRA M2 I restarted, I noticed blue vertical lines on the windows on the screen, then the loading screen went white, I restarted the pc and it Gauthier go beyond screen black screen of toshiba. Some people told me that it is the other HDD VGA. What do you think?

  Hello

  For me, it certainly looks like the graphics card failure!
  It's really bad, because for the most part to the whole motherboard must be replaced! :(
  But to be 100% sure the diagnostic test is necessary.

  I think you should contact the ASP in your country. Guys to explain the situation and ask for clarification.

  Maybe your warranty is valid? In this case all replacements would be FRO free!
  Usually the guarantee must be valid for 24 months if you have saved this notebook on the Toshiba page.

  concerning

• Cannot focus Skype name and password in the login screen

  I use Skype for a long time now and used the automatic connection whenever I start my computer. Today, I accidentally disconnected from Skype. Now, I can focus my Skype name and password in the login screen. I'm having the same problem with fields in Internet Explorer 11. Does anyone know a solution to this problem? I use Windows 7 Professional.

  For me, that did the trick.
  http://community.Skype.com/T5/Windows-desktop-client/Skype-won-t-sign-in-can-t-enter-password/m-p/41...

• How to you turn off the user invited on the login screen?

  How do disable you the guest user account on the login screen?

  Basically, I have a brand new Macbook, but can't for the life of me figure out how to get rid of the guest user account.

  Summary:

  • MacBook 2016
  • El Capitan 10.11.6
  • FileVault is enabled
  • Find my Mac is disabled
  • Comments User in users and groups is set to Off

  Tried the following from another forum:

  1. make sure that 'find my Mac' and guest user are disabled, restart;

  2. check if the system integrity Protection is enabled or disabled by running: csrutil status to the Terminal.

  3 if she says ' Protection of the integrity of system status: activated. "go to 4.1.

  4. If not, only 4.4 and 4.7;

  4.1 restart in "Recovery Mode": stop and hold command + R after pressing the power button.

  4.2 go in "utilities > Terminal" and run the command: csrutil disable.

  4.3 restart;

  4.4 open the Terminal and run: sudo touch /System/Library/PrivateFrameworks/EFILogin.framework/Resources/EFIResourceBuild er.bundle/Contents/Resources, this will force the update of the connection EFI;

  4.5 reboot (again) in "Recovery Mode": stop and hold command + R after pressing the power button.

  4.6 go in "utilities > Terminal" and run the command: Activate csrutil;

  4.7 reboot and it's fixed!

  4.8 re activate 'Find my Mac' as you wish.

  • FileVault is enabled

  You cannot disable the Guest user. This is especially in the case where you cannot unlock your hard drive. It provides a limited capacity of Safari so that you can access the services of help on the internet.

• Blue screen in Vista 7 just after the login screen

  We get a blue error screen 7th on Vista 64-bit SP1 right after the login screen appears.  The blue screen immediately goes, and system restarts (or sometimes just hangs).  I was not able to find the codes of the 7th in the research:

  (took a picture of the screen...)

  STOP: 0x0000007E (oxFFFFFFFFC0000005, 0xFFFFF80002325C87, 0xFFFFFA60165BE3E8, 0xFFFFFA60165BDDC0)

  I am able to boot in safe mode.  Do you have a chkdsk C: /F and which did not help.  Do you have a repair system using the Vista startup disk and that did not help.   Went to safe mode and MSCONFIG and position the clean boot and that did not help.  I tried to update to SP2 and unable to complete safe mode.

  The ideas and the sage advice would be greatly appreciated.

  Pete

  Hello

  Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available from the OneDrive or other
  file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  ------------------------------------------------------------------

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  

  Bug SYSTEM_THREAD_EXCEPTION_NOT_HANDLED control has a value of 0x0000007E. This bug check indicates that a system thread threw an exception that the error handler did not.

  Important info if you received a STOP Code
  
  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED parameters

  The following settings appear on the blue screen.

  To view the settings, click on this link.
  http://msdn.Microsoft.com/en-us/library/ff559239 (v = VS. 85) .aspx

  CAUSE

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.

  • 0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• UAC prompted on the login screen

  Hi all

  I've seen several posts on the user invited on the login screen. There are also several suggestions how to get rid of the account, so far I had no chance to delete the account of user invited to my login screen.

  I bought a brand new MBP and migrated all of my old Mac Mini to the new MBP. The guest user account was NOT visible on the Mac Mini.

  Here's what I've tried so far:

  • Checked 'Find my Mac' is NOT enabled
  • Guest user account is set to 'Off' under users and groups
  • A ran a script that I found in an older post in the Terminal

  None of the things above removed the user invited to my login screen.

  It's all solid fix how to get rid of the guest user?

  Thank you!!

  You said "guest user account is set to off in users and groups.

  Do you mean that the guest user account is always accessible in the ordinary journal?

  Also-

  When you are in users and groups - you by clicking on the lock - and enter your password to make changes?

  If so - you should be able to simply remove the account of guys using the sign minus (-) sign at the bottom of the box

• Skype is stuck on the login screen. E52

  Hello

  For a few months now Skype stops just to the login screen. After I touch my user & pass, I hit connect and that's all. It remains there forever.

  I tried this on Wifi and 3g...

  He used to work before... doesn't bother searching for an answer of all these months because I had no need of Skype. And now I * really * need to use Skype on the move.

  I reinstalled the firmware of Nokia, no go.

  Help, please!

  It works now!

  I created a new Skype account with the app and it connected! Wow.

  Then I disconnected & reconnected since my old Id and it works now as well.

  Spoiler (Highlight to read)

  : manvery-happy:

• the user does not appear in the login screen (el capitan)

  I see a user in the control panel users & groups of system settings, but it does not appear in the login screen. How can I fix it? I did a reinstall of system and see that the data is always there the prior installation.

  In users and groups > Connection Options, is the verified user list?

  If you have FileVault active it cannot list users until you type the Admin password for decrtpt disk.

• L540: password accepted anywhere but the login screen

  Hello!

  I was happily using the sensor of fingerprint on my L540 for awhile, until what a few months ago, I reinstalled Windows 7 (Professional, x 64). After setting up everything, and by installing drivers Lenovo, I noticed this problem:

  When I start the laptop and you type the password, it will accept it.* but if I open the dialog to change, Windows will claim that the password that I type is wrong. I tried several times, also copy - paste where she had changed the layout of the keyboard, but just, he does not accept the password that works on the logon screen.
  The same thing happens when I close the laptop and it goes into sleep mode, and then I try to connect again. In this case the only thing that helps is to extinguish completely the laptop and restart.

  For a while it would not also accept the password on the login screen * front * password indication was shown. Of course maybe I just typed it, but it happened very regularly for 1-2 weeks or more. At one point that specific question came not, without changing me anything.

  In short, I can't set up the fingerprint sensor because I have to type the password, and I can't change it to something easier. This particular password wasn't supposed to be typed much. I trusted that the fingerprint sensor would work.

  I thought that it might be caused by one of the drivers, given that the problem started happening immediately, but only a few days after that I want to install Windows. (My memory is a bit blurry, sorry).
  Then I threw most of the drivers I downloaded manually (especially the keyboard driver and fingerprints) and installed a package that installs drivers automatically, but that has not changed anything.

  I have no idea if this would be a problem of Lenovo or a Windows problem. Can you give me an idea where to go with this problem?

  Thank you very much!

  Easiest thing would be just to use the new account. But what about the why, that's happened, I don't really know why. =/

• Noise Equium A100 - 02L (PSAAQE) on the login screen

  Hello

  I installed the latest drivers Intel graphics (version 7.14.10.1283 for Mobile Intel(r) 945 Express Chipset Family) on the laptop. Everything works OK but when vista starts "interference such as noise" can be seen on the login screen. Once connected, everything seems fine.

  I tried to install the old drivers from the toshiba site but these drivers will not be installed because an error occurred to halfway through the installation.

  Can anyone help?

  Hello

  Could you please describe in detail the noise on the login screen?
  I hope that this problem is not related to the fault of the graphics card.

  Have you noticed this problem on the laptop with image and preinstalled Toshiba drivers?
  It would be very interesting to know if it appears on the new BONES recovered.

  Check it out

• Help: Children are without going through the login screen

  My children understand how to access my account on my Macbook without having to type in the username and password.  Thus, for example, if my Macbook is on the login screen, they will be the following: (1) button press F1 to darken the screen. (2) press the key F5 to switch off the light on the keyboard. (3) press the power for a few seconds turn the computer off. (4) press the power button to turn on the computer. and then (5) press and hold the power button when the Apple icon and the status bar.  After a few seconds, they have access to my account as if they had signed using my login credentials.

  It becomes very annoying, because they have access to my laptop when I'm not there and I'm starting to lose control over the use of my own computer.  My question is: is it possible that I can keep my kids to connect to my computer this way and make sure my account access cannot be obtained by entering the appropriate user name and password?

  Thanks in advance for any thoughts/ideas/instructions you may have.

  "is it possible that I can keep my kids to connect to my computer this way and ensure access to my account can be obtained by entering the appropriate user name and password?"

  Yes it is.

  Open System Preferences > users and groups , and then select the password tab and select the Admin account on the left.

  Then click on: Connection Options (you will be prompted for your admin password)

  Now click on the the automatic connection: pop up menu and then select disabled.

  At this point, it may be advisable to change your admin password.

  With your administrator account selected in users and groups, click change password

  Write it down and store it somewhere safe.

• Need still restarts desktop Acer Aspire - keyboard not detected at the login screen

  Hello

  I have Acer Aspire ATC-605-UR13.

  In the course of the last 4 weeks, suddenly the keyboard is not detected at the login screen. The mouse works.

  Still, I have to restart to make the keyboard work.

  Any idea of what caused it? Perhaps any software installed that do?

  P.S.: Btw, I tried a new keyboard, the same behavior. I have concluded that this is not the keyboard.

  Thank you!

  This problem has been reported after that install some recently released update of windows... Currently the ability to perform a restore of the system to an earlier date. You can also try to uninsatlling updates of windows manually from Control Panel > windows update.

• Computer keeps locking and go to the Login screen

  I am running Windows Home Premium Service Pack 2. My computer keeps locking and return to the login screen. I went on the screen savers and I'm not using a screen saver and so I have not activated in him back on, return to the login screen is not checked. I tried everything I know to do and I am now at a loss. It becomes very annoying. What I'm missing here? Thank you.

  Hello

  Check the settings in the Control Panel - Power Options - upper left "require a password on Wakeup"
  If new game that will put you in the opening session after a sleep screen.

  Check these institutions:

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.