Ultiboard: Cannot stop component outline

Even when I disable the visualization of all the layers except the current, I still see the outline of all the components on the circuit board. They are always there when I move the active layer to another layer thus and disable the visualization of the current previous layer as well.

I remember ever turn on an option to visualize the contours of component and you don't see any option for during such a thing that I look at all the different options.

I use Ultiboard 11.0.2 with Windows 7

Is attached a screenshot of the problem.

Hi Rick,

The outline on the parties just shows that they are currently locked. If you click with the right button on the outline and select unlock, the outline will disappear.

Tags: NI Software

Similar Questions

Cannot stop or restart my macbook unless I force close down

Cannot stop or restart my macbook unless I force close down

Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

cannot stop at several new tabs to open boxes at least three every time I have leave and return to the home page or restart Firefox

cannot stop at several new tabs to open boxes at least three every time I have leave and return to the home page or restart Firefox

Hi TGreybeard,

Have you looked at the Knowledge Base article Firefox opens several times empty tabs or windows after clicking on a link ? There is some good information in there that should help you to solve the problem.

Hope this helps!

Upgrade Windows 10 is on my home page and cannot stop it.

* Original title: intrusion and abuse of microsoft

Microsoft, who thinks they are. They put 10 of windows on my computer and then it kept popping up all the time. It was the devil trying to get rid of it. Twice I had to get rid of. Now, he is on my home page and cannot stop it. He is screwing with my outlook e-mail. They went to the Council with this *. He went to the point where it is abusive. Then their phone system is a joke. I called and after 5 minutes of advertising, I thought that the number has been changed. Had to call another number to find that they are closed. What a joke. Apparently, Microsoft has built in the diversion on each package of the window and I'm sick of their support for my computer. I stopped upgrading because you don't know what the hell they put in them. Microsoft, leave my only freaking computer.

Right-click on the Start button and select Properties, the taskbar tab click Customize (under the Notification area). In the next window, place the cursor on GWX 1 and use the 2 scroll to change the behavior to Hide icon and notifications 3 and click OK 4 . You will need to uncheck the box next to always show all icons and notifications on the taskbar to be able to change the behavior of icon GWX.

How to manage Windows 10 notification and update options

https://support.Microsoft.com/en-us/KB/3080351

My Windows 7 error has occur "" cannot find MSDVX. "» EXE"and I cannot stop him, how can solve this problem?

My windows error has occur "" unable to find MSDVX. "» EXE"and I cannot stop him, how can solve this problem?

Depending on the location, may be a virus/malware

Try http://www.microsoft.com/security/scanner/en-us/default.aspx

And

http://www.Malwarebytes.org/products/malwarebytes_free

Accidentally, I turned on the narrator and cannot stop it.

Accidentally, I turned on the narrator and cannot stop it.

Can someone tell me please how to disable Narrator in windows 8.1.

Try the windows key + enter

VMware Player 5 - Tools - «Cannot find component on the server to update...» »

While creating a new virtual machine in VMware Player v5.01.1 (build 894247), for Windows 8 Professional, I met an error saying "cannot find component on the update server. Contact VMware support or your system administrator. However, the creation of the VM continued, and the new Win 8 VM apparently working properly.
However, if I now try to install VMware Tools, I get the same error.

For the Windows hosts running VMware Player 5.0.1 build 894247:
Install VMware Tools ISO image on Windows host, download host and "détarer" and then run. Then silently installs the VMware Tools ISO Image in the working directory. If VMware Tools not normally install in the virtual machine then manually assign the target VMware Tools ISO Image on CD/DVD to the virtual machine and install manually.

====================

For the Linux hosts running VMware Player 5.0.1 build 894247:
To install VMware Tools ISO Images on the host Linux see information in my answer Re: WS 7.1.4 - impossible to download VMware Tools/upgrade to update to install on the Linux host. Then if VMware Tools will not install normally in the VM and then manually assign the target VMware Tools ISO Image to the CD/DVD from the virtual machine and install manually.

Cannot stop recording in Captivate 6/Mac

I work in 6 for Mac, OS 10.6.8. Cannot stop recording in video mode or simulation of sw. CMD + enter does not work, nothing works, I have to force quit.

The folder ' Adobe Captivate 6 "than Anjaneai you headed IS the preferences of your 6 Captivate installation folder.". " Just rename this entire folder or delete what he and 6 Captivate will recreate it fresh next time it starts.

Cannot stop a purchased video download

Hi, tried everything, I hope someone can help. With the help of iPad Pro, run IOS9.3.

I've been watching Mad Men and working my way through the series, now at halfway in the 6 series. However when I go to the app Store in iTunes on the iPad and select "downloads", I notice that an OLD episode is listed as download. I tried to stop, but something is wrong:

(1) I should be able to press pause to stop it at least, but the icon does not work. No breaks.

(2) I should be able to select 'Edit' at the top of the page, and then select the episode individually by sprinkling the radar and then confirming button, but when I select edit there is no button radar for this episode, so I can not select for deletion.

(3) memory have a feeling that I should be able to hold push or hit delete, but anyway, I can't.

(4) should be able to go to videos and see the download (rotating icon), I can see, but if I try in different ways within the videos app to stop it (drag left - remove etc) they don't work.

There is something special about this download because if I add one or more additional downloads, they appeared all correctly (at the time in the app Store iTunes downloads section and videos app), and I can easily pause / restart ' remove at will with no problems. However even if I add one, I have therefore two downloads side by side, the second (newly added) can be pointed and deleted without problem but always the tenacious original cannot.

I tried to close the application, close app apps, soft-reset of the iPad. None of these work, as soon as I restart the machine, that it is once again in the store iTunes download queue and download AGAIN! The only thing I have not tried is goes to the storage and the removal of all videos... This is because I have several videos on breast series thatI want to, and I guess I have to delete or to level the series or, more likely, all the videos of the episodes. Also tried abdesslem support but no joy there of course.

I'm guessing I'm not the first. Can someone help with this?

Thank you

Alastair

I don't download TV series, but I see no reason why you could not go in the storage settings and delete just that one episode. You even try this?

Windows Vista cannot stop

Hello everyone,

Tried to shutdown windows vista computer, he said "Configuring updates: stage 3 of 3-0% complete, do not put any computer"

After a while, it says windows is shutingdown, she then stopped and restart again the same page.

He keeps repeting the same prosess

Windows is not blocking down

Help, please

Restore point:

Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

Try a restore of the system once, to choose a Restore Point prior to your problem...

Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

Download the ISO on the link provided and make a record of repair time it starts.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

http://www.bleepingcomputer.com/tutorials/tutorial148.html

Link above shows what the process looks like and a manual, it load the repair options.

NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

Read all the info on the website on how to create and use it.

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

It's a very good Vista startup repair disk.

You can do a system restart tool, system, etc it restore.

It is NOT a disc of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

And also read this info:

http://www.bleepingcomputer.com/tutorials/tutorial140.html

Understanding Windows Update and Extras in Windows Vista at the link above.

Remove the Vista updates; two ways to do this:

1. a System Restore to before the updates:

Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

If you use Norton, disable it before using the system restore.

If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

System restore steps according to the info above.

Also:

2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

> then click the one that you don't want > uninstall will appear at the top > uninstall it.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

> Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

> or if you do not need an individual > right-click on > UAC prompt > hide it

See you soon.

Mick Murphy - Microsoft partner

Cannot stop a USB device due to some unknown program running.

If I can't stop a device USB due to some unknown program running (like a virus), how can I find the program, so that I can stop it with the Task Manager?

Hello

The message (this device is currently in use. Close any programs or windows that might be using the device, and then try again) is usually the result of an application, file, open the document, audio or video, or any other application is being used (ranging from the USB key) when you try to remove it by clicking Remove the device safely in the notification area.

The error can also be caused if your anti-virus is actively followed / analyze the USB drive. Normally, where the withdrawal of a USB flash drive, Windows must stop all operations of reading / writing on the disk so that it can be removed safely. If this is not the case, the flash player may be damaged or lost or corrupted data. However, if Windows determines that a file is in use, it can then provide a message that indicates the volume cannot be stopped now.

So, before to eject or unplug a mass storage device, make sure that none of these activities are performed on the mass storage device before ejecting.

A cut-off device

Most USB devices can be removed and unplugged. When the fact of unplugging storage devices, such as USB flash drives, make sure that the computer has finished saving all the information on the device before removing it. If the device has an activity light, wait a few seconds after the light has finished flashing before unplugging.

If you see the icon remove the device safely in the tray on the side right of the bar tasks, you can use it as an indication that devices have finished all operations in progress and are ready to be removed. Click the icon and you will see a list of devices. Click the device you want to remove. Windows will display a notification to tell you that it is safe to remove the device.

I also suggest you make a system full scan just to be sure.

http://www.Microsoft.com/security/scanner/en-us/default.aspx

Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

Cannot locate component user32.dll

OK... so... help my mother at a distance.

Yesterday, everything was fine... Today she then turns on his Dell to this error:

"Stop c0000135 Unable of component located. This application has failed to start because user 32. dll not found. Reinstalling the application may fix this problem.

I tried to boot mode safe place... the same bsod and messages

I tried the last good known... same error message and bsod

Can't seem to fix it... guess I need the installation cd?

Try to get to the system restore to save one day...

Any help would be great

Simply replace the file... and you will have to start on something to do.

The instructions explain how to make a bootable CD.

You create the CD, stick it in the afflicted system and boot on the CD. Mini XP looks like Windows, if you find a copy of the file and replace/copy in the right place, remove the CD and reboot your system with the hard drive.

I hope that's all you need to do.

You ar at a disadvantage if you are working remotely. Somehow the CD you made and the afflicted system must meet physically. Maybe your mother has a close friend who can make the CD and give it, and then you can help remotely. It would be useful that you (using your own system) also made a CD so you can see how it works and practice.

This will be the big challenge for you in this operation.

Then you can think of the upgrade or replacement of McAfee with something else.

I suspect that McAfee quarantined to your way of thinking of user32.dll file he was afflicted. Sometimes anti-malware or anti-virus software will quarantine (deletion) of the critical files on the XP system and leave your system unbootable.

Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

Cannot stop iTunes

I am unable to prevent iTunes from running. Well, it is not actually run. It crashed and I used alt-cmd-esc to stop it, but it will not disappear in the list programs. I killed all iTunes process in activity monitor, but iTunes refuses to stop.

I have can´t the reboot via the dock or.

What can I do without having to restart the Mac? No matter what Terminal Magic?

(OSX 10.11.3)

As far as I KNOW, if you can not force to leave in the Apple menu, you have to force quit the Mac by using the power button. First close all other applications.

Tecra S1, cannot stop / memory dump blue screen physical

Hi all

I really have a serous problem with my laptop TOSHIBA Tecra S1 series.

I can NOT stop, she gives discharge and it restarts (bule screen) memory physics.
Whenever I restart, it gives discharge and it restarts (bule screen) memory physics.

In both cases when windows start it give the message that:

Your system has been recovering from a mistake of the serosaand it give more details

If you need a snapshot, please send me email.

The system that I use:
Windows XP - SP2 Professional

This problem came once I installed the software my company's VPN .
I tried this software in the laptop TOSHIBA TWO and he gets this problem, I also tried to install the software on other systems and the two systems are very good and they work properly.

Can someone help me, this problem is really annoying me. If you need the VPN software my company gave me please send an email and I'll send it to you.

My email: [email protected]
[email protected]
[email protected]

I really appreciate your quick answer to the problem.

Thank you
AR

[Edited by: admin]

Hello

Is what VPN Client this?

It seems that the OEM operating system do not like the VPN Client. The problem could be that Toshiba has designed its restoration in a small way differently OEM CD or some utilities occure the problem because each 'designated' its own Windows OEM manufacturer.

There are built-in drivers, tools and software. But normally the Toshiba and the other manufacturers don't change something in the operating system. So I think that there is a software problem.

In my opinion, I want to uninstall programs in different turn that may occure the problem.

Chris

Satellite M70 cannot stop

I bought my Satellite M70 in February 2007. It had been nice up to a weeks ago. I can't stop normally again.
He can't even switch to standby or Hibernate mode. It crashes with blue screen. The cursor moves on the screen but nothing else does not work once the blue screen appears.

The only option that remains for me is to press the power button to turn off. It works normally if started again, but will not stop. I have a lot of data on it, so I don't want to use the recovery CD. Pls how to fix SAT without reformatting. Thank you

Hello Bob

None of us can say for sure why this happens, and you can't wait for a magic solution. What we do here, it's just to speculate why this happen. In my opinion, a background program block system and used to stop. Who knows what applications you have installed in the past few months, but I'm sure one of them is responsible for this.

If possible, save all your data to external HARD disk or a second partition. Use the installation in expert mode and install the recovery image on the partition c. after installation of clean operating system everything works OK again.

If you don't want to do it try to remove all the latest applications installed and make your system clean. I also recommend you use a registry cleaner application. You can find many of them on the net.

Good bye

Ultiboard: Cannot stop component outline

Similar Questions

Maybe you are looking for