Ultra Backup 64 GB: how to restore files on a public computer?

Similar Questions

• How to restore all data on the computer to the backup device.

  Original title: relocation of information on the backup drive.

  Recently, I backed up my computer and did a system recovery. I used the backup disk to reinstall all my info but can't from there. I was w/ms office and got these files back in (honestly I don't know what I did) but still haven't my other files, including photos and videos of my family on the system.

  HELP PLEASE...

  Thank you

  Hello

  This can help you.

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  "How to restore a full backup of the computer.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  FAQ from Microsoft about backup and restore:

  "Back up and restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  See you soon.

• I can't see all folders in library mode because my hard drive had to be replaced. How to restore files and photos?

  I can't see all folders in library mode because my hard drive had to be replaced. How to restore files and photos, so I can link to the catalog?

  The original drive I had was called E:... THAT IS, FILE NAMES ARE!

  If you would like to recommend that I go to each of these lines and redirect each of these folders, right?

  Yes, reconnect the top-level folder on drive E:, as shown in Figure 4 here: Adobe Lightroom - find folders and files moved or missing

• Satellite L500 - how to restore the menu "repair your computer"?

  Hello world

  I have a laptop Toshiba L500, Yestaday I tried to restore the system to the factory settings (by pressing F8 at startup high and choose "repair your computer"). In the system has been installed almost, but at a stage of installation drivers to read memory cards and similar - there was a failure (the blue screen and need down) - after that - Windows 7 is not loaded. parsing errors (by means using a floppy disk to another Windows 7 install) says that the registry is damaged, cannot repair.

  but the main problem - when you press F8 at startup upward - there is no MORE menu 'Repair your computer' (!) . It is impossible to start Windows 7 predefined. So there's the hidden sector containing Windows predefined (I saw when loading a disc of hatch - Total order could start - and hidden sector was visible). All files in drive recovery HARD necessary are also available.

  How to restore the menu "repair your computer"? or how it is possible to start Windows predefined without pressing F8?

  > Hidden article exists, I saw it, there are all the files recovery HARD drive (which was in the laptop after buying), but I can't begin to recover Windows because I don't have menu not 'repair your computer' to start the laptop. He disappeared...
  Of course, the flag in the Advanced Start menu seems to be deleted and therefore drive recovery HARD option isn't available anymore.
  Probably the partition has changed.

  But in case of HARD drive recovery files are still available on the recovery partition, you can try to create the USB support of own recovery using of workaround:

  [How to create a recovery media USB flash drive to the valorisation of the ISO images - or (DVD) discs | http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm]

  I guess that this directive should be very useful.

• How to save files converted on my computer

  How to save files converted on my computer

  After have connected you to the Acrobat.com service, you will see the list of pdf files you converted.

  Each pdf file is a link which, which is clicked open the pdf file in the page. In the upper right corner of the page, you will find the icon as shown in the screenshot below to download the file.

  You can click the icon to download the converted pdf file.

  

• How to restore files after virus Chantilly drive clean and also delete system restore points and all possible backup and restore points

  IM on windows 7 and on the 19/11/2011 i got a virus and it erased all my data off of the pc also restore points system and all backup and resrtore removed points ive used many recovery programs installed on usb drives and they say all my files are damnaged how to restore all my files to the previous locations without them being damaged for example mp3 video & images

  Hello

  If the files are deleted, then you will need to use any third party recovery software to recover files.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• How to restore files from the Recycle Bin after that that they have been removed

  How to restore the files that I have deleted by mistake?

  Mac Mini

  El Capitan 10.11.1

  Owen,

  owenmckee wrote:

  How to restore the files that I have deleted by mistake?

  From your backup... you have a backup?

  

• How to restore files to the window after it is stopped due to a virus

  How to restore windows files, after that he stop to save files of virus. Virus has now been cleaned up, and I want to restore the data.

  From the backup you made.

• How to restore file .bkf on an external hard drive to a xp computer

  I have an external hard drive with a file bkf windows server - backed up on another computer and I need to access the data. The machine that I'm trying to restore is a Mac running XP

  Hello

  You can restore files from a BKF file on an external hard drive on the computer by using the Windows XP Backup Wizard. The Backup Wizard is installed by default in Windows XP Professional, but not in XP Home. XP Home users can install it from an installation of Windows XP Edition family CD.

  Follow the steps mentioned below and check if the problem persists.

  a. install the backup on Windows XP Edition family Wizard, if it is not installed. Record of the family place of the Windows XP Setup CD in the hard disk of the computer and install the wizard by clicking "Start", click "My computer," double-click the CD icon in the window my computer, double-click the "ValueAdd", by double-clicking on the folder "Msft", by double-clicking "Ntbackup" and clicking on "NTBackup.msi."

  b. connect the external hard drive to the computer.

  c. open the Backup Wizard by clicking on "Start", "All programs", "Accessories," "System Tools" and "Backup".

  d. click "Next" in the Welcome window.

  e. click "Restore files and settings", then click "next".

  f. click "Browse" in the window "to restore", click "Browse" in the "Open file Backup" window, click on 'My Computer', double-click the hard drive and double-click the BKF file.

  g. click the boxes left the files desired under "What to restore," then click "next".

  h. start the transfer by clicking on "Finish".

  i. click 'Close' when prompted.

• How to restore files and data that has been deleted?

  How to restore the link folder and accessories programs in sp2 of vista start menu

  Henry

  Hello

  Try a restore of the system back to before that you did.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  Happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How FTP a file from the client computer to the server database using Forms 10 g

  Hello
  I want a file from a client computer to the database server computer using Forms 10 G (or PL/SQL) via ftp.
  could you please tell me how can I do this
  
  Concerning

  Hello

  I gave u the adequate instructions on webutil configuration but u did not comply with it.
  I will post again please read correctly and follow it.

  How to get running with WebUtil 1.06 included with Oracle Developer Suite 10.1.2.0.2 on a win32 platform
  Solution
  Assuming a new 'Complete' installation of Oracle Developer Suite 10.1.2.0.2,
  Here are the steps to get a shape of small test running, using WebUtil 1.06.

  Note: Oracle_Home is used as an alias for your real oDS ORACLE_HOME.
  Feel free to copy this note to a text editor and do a find/replace on
  Oracle_Home with your real value (no slash). Then, it is easy to
  copy and paste the actual orders to be run from the copy of the memo.

  (* 1) * download http://prdownloads.sourceforge.net/jacob-project/jacob_18.zip
  and extract to a temporary staging area. Do not attempt to use 1.7 or 1.9.

  (* 2) * copy or move jacob.jar and jacob.dll
  C:\webutile is the folder where you extracted Jacob and ends in ...\jacob_18
  CD C:\webutile
  Copy jacob.jar Oracle_Home\forms\java\.
  Copy jacob.dll Oracle_Home\forms\webutil\.
  Staging of Jacob is no longer needed and can be deleted.

  (* 3) * sign frmwebutil.jar and jacob.jar
  Open a DOS command prompt.
  Add Oracle_Home\jdk\bin in the path:
  set PATH=Oracle_Home\jdk\bin;%PATH%
  Sign files and check the result of success:
  Oracle_Home\forms\webutil\sign_webutil Oracle_Home\forms\java\frmwebutil.jar
  Oracle_Home\forms\webutil\sign_webutil Oracle_Home\forms\java\jacob.jar

  (* 4) * If you already have a pattern in your RDBMS that contains stored WebUtil code,.
  You can skip this step. Otherwise,.
  Create a schema for the stored code WebUtil and privileges to
  Sign in and create a stored package. Name of the schema "WEBUTIL" is recommended
  for no reason other than consistency based on users.
  Open Oracle_Home\forms\create_webutil_db.sql in a text editor and remove or comment
  the declaration of EXIT, in order to see if the objects have been created witout
  errors.
  Launch SQL * more like SYSTEM and the issue:
  Webutil IDENTIFIED BY password CREATE a USER
  DEFAULT TABLESPACE users
  TEMPORARY TABLESPACE temp;
  /
  GRANT CONNECT, CREATE PROCEDURE, CREATE SYNONYM TO webutil PUBLIC;
  /

  CONNECT webutil/webutil@rcci
  @Oracle_Home\forms\create_webutil_db.sql
  -Inspect SQL * Plus output for errors, and then
  CREATE a PUBLIC SYNONYM webutil_db FOR webutil.webutil_db;
  /

  Reconnect as SYSTEM and the question:
  Grant execute on webutil_db to public;

  /

  (* 5) * Edit Oracle_Home\forms\server\default.env and add Oracle_Home\jdk\jre\lib\rt.jar
  to the CLASSPATH entry.

  (* 6) * add edit Oracle_Home\forms\server\formsweb.cfg default insde:
  archive_jini = frmall_jinit.jar, frmwebutil.jar, Jacob.jar
  Archive = frmall.jar
  also add:
  webutil
  WebUtilLogging = off
  WebUtilLoggingDetail = normal
  WebUtilErrorMode = alert
  WebUtilDispatchMonitorInterval = 5
  WebUtilTrustInternal = true
  WebUtilMaxTransferSize = 16384
  baseHTMLjinitiator = webutiljini.htm
  baseHTMLjpi = webutiljpi.htm
  baseHTML = webutilbase.htm
  archive_jini = frmall_jinit.jar
  WebUtilArchive = frmwebutil.jar, jacob.jar, f90all.jar
  Archive = frmwebutil.jar, f90all.jar
  lookAndFeel = oracle

  (* 7) * Oracle_Home\forms\server\webutil.cfg edit and add:
  Transfer.Database.Enabled = True
  Transfer.appsrv.Enabled = True

  (* 8) * start the OC4J instance

  (* 9) * start Forms Builder and connect to a schema in the RDBMS used in step (4).
  Webutil.PLL open, make a 'compile ALL' (shift-control-K) and generate PLX (Ctrl-T).
  It is important to generate the PLX, in order to avoid the FRM-40039 indicated in Note 303682.1
  If the PLX is not generated, the library Webutil.pll must be fixed with
  path information full access to all who wish to make use of WebUtil. This is NOT recommended.

  (* 10) * create a new WBF.
  Open Webutil.olb and subclass (not copy) the Webutil opposes the shape.
  There is no need to subclass the WebutilConfig object.
  Attach the Webutil.pll library and remove the path.
  Add a logon trigger IT with code
  NULL;
  to avoid having to connect to a RDBMS (optional).
  Create a new button on a new canvas, with the code
  show_webutil_information (TRUE);
  in a trigger WHEN BUTTON PRESSED.
  Compile the FMB to FMX, after doing a compilation-All (shift-control-K).

  (* 11) * under Edit-> preferences-> Runtime in the form designer, click the "Reset to Default" If
  the "Application Server URL" is empty.
  Then add '? config = webutil' at the end, if you end up with a URL of the form
  : http://application-tier server: port/forms/frmservlet? config = webutil

  (* 12) * run your form

  Note: If you want to use Jacob and you can configure jacob too, if you follow the above mentioned instructions.
  Sarah

• How to restore files from a backup made during a system recovery?

  I have a HP Pavilion a6700y Desktop PC running Vista 64-bit. I had to do a system recovery, and I backed up my files, such as recommended.

  How can I restore them?

  Thank you

  Tiggy

  Acutally, that I found was in a folder named MINWINPC, there was a folder with the date of the backup, and that is a file named Backup.1.exe. When I ran that the files have been restored - very slowly. What you say can be applied to a different version of what I have.

  Thanks a lot for the input!

  Tiggy

• How can restore files & apps after a PC Refresh (without having to buy anything)?

  After that my daughter was using my PC, I discovered that she had accidentally made an update of the complete system (apparently distracted by her little brother). She was just looking around and clicking on things randomly, trying to learn more about the PC, but now all my files & apps disappeared and nothing has yet been saved. Help, please! I have the list of deleted files & apps but no idea how to get back them. I found a site that says it can do anything but I have to buy their product and I'd rather not.

  Things you tile store... Just go to the store... and then right-click on the graphics and a top bar opens... says something about the installed applications...  Look there and you can reinstall your purchased applications or all the other apps you had installed.

  If the documents and pictures are gone... they are very likely gone forever if you don't have the file history or did not have any backups.      Same thing with your Desktop installed programs, so no system image or no restore disc - theyre gone manufacturer.   You will need to send an email and get your registration key product and new downloads if you do not have the cd/dvd to reinstall these paid programs.

• How to restore files that have been backed up for a recovery of the system on WIndows 8?

  My Windows 8 would not start due to a corrupted boot critical file. I had to do a system recovery, but he asked if I wanted to back up the files, I did. Now how to recover these backed up files?

  Hi Jeffry,

  1. How did you perform the system recovery?

  2. have you used the options provided by the manufacturer of the computer or the recovery partition?

  3. What is the brand and model of the system?

  We can refer to the article and try the steps to restore your files.

  How to use the file history

  If you have used the system recovery options provided by the manufacturer of the computer, then you can also get in touch with the manufacturer of the computer to restore the backup files.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• How to restore files from the Recycle Bin?

  I have music files to the trash by mistake; How can I restore them back?

  Hi there butcher.

  Looks like you have your entire music library in your basket and you want to return whence they came. This step of the following article should help you to do:

  OS X Yosemite: delete files and folders

  If you change your mind before you empty the trash

  Click on the Recycle Bin to open it, and then drag the item to the trash, or select it and choose file > put back.

  Thank you for using communities of Apple Support, all the best!