UltraSharp U2713HM installation on MAC

Similar Questions

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• MAF: Issues installation on MAC

  Everyone knows an installation on Mac OSX 10.9 MAF problem?  I can't open the .jar file?  I usually install the generic file

  Thanks for sharing,

  TreeStrepek

  Hi, TreeStrepek, have you tried simply double-click on the jar file to run?  I ran into the same problem when I try to double click on it, and the easy solution is to launch the jar from the command-line, i.e. java-jar .  You need to dial down the security setting in System Preferences - Java - security to allow the double clicking on install.  However, it has wider implications and the workaround is pretty easy to accomplish.

  If you can't yet run java-jar command Setup, then you probably have a JAR file.

  THhnks,

  Joe Huang

• Can I transfer my installation of mac education 6 cs to the installation of pc?

  Can I transfer my installation of mac education 6 cs to the installation of pc? Or is this even possible?

  Hi Ilkkas,

  Have you bought this for both MAC & Windows? If Yes, then you can use the serial number for Windows and use the product or well you might want to buy the Windows Version of the same product or can be upgraded to the Cloud.

  See you soon,.

  Michael Sharma

• Deleting the files for installation on Mac

  So for the past few weeks, my Mac suddenly began to slow down to a point where it is unusable, and I have to force quit. Then, it's all right, until it happens again.

  So, I opened my activity monitor to check to see if something was using any high CPU or memory. Under both, I found 3 files named "Installer" that used 90% of my memory and CPU! They were currently only when my computer was working extremely slow, however. So, I stopped and now I left them, you can see the memory/cpu usage down almost 90% to 5% usage. Of course, I know this should not be the case, and their abandonment seems to work, temporarily... Files back about twice a day, and I have to repeat the process.

  It isn't a huge deal, now that I found what is causing the spike of lag, it's just annoying to have to open the activity monitor all the time and be ready to close the installation files when the lag spike occurs. It happened to me several times as he tried to take notes in class, which can cause a lot of headaches trying to get my computer facing up and running in a short period of time.

  Anyone know what this could be due to leave? Every time I close among the installation files, so I thought they would have gone, but they seem to keep coming back. It's very strange.

  Try to start safe mode (press on and hold down the SHIFT key during startup)

• Mac Pro 1.1 2006 fails installation of Mac OS x after the kernel panic

  Hi all

  A few days ago, I have known repeated panics of the kernel starting with my mac pro xeon quad core 1.1 (2006).

  It was not impossible to access the system (to the start screen kernel panic), impossible to access SafeMode (stuck at apple logo stuck charging symbol), I decided to do a clean install of the system (Lion).

  Installation is anyway impossible, because when I plug the usb with lion pen, he anyway stucks at the apple screen logo and freezes loading (the same problem also occurs if I burn image of lion uploaded on the apple store on a dvd).

  I tried the dvd and usb pen on another computer and installation went flawless.

  Then, I tried to reset the SMC, reset the PRAM, but it's always the same.

  Then I tried to do an apple hardware test (full expanded mode) and after 55 minutes of testing, he said no. PROBLEMS DETECTED.

  What I try to do?

  Thank you very much.

  I don't remember if it works in Lion, but see if you have the time to hit the keys CMD + L when the installation starts, to get a visible history of the NSO will.

• HP Deskjet 3055 has all-in-one installation with mac

  just bought the perfect printer for my HP Deskjet 3055 A scanner/printer/photocpier needs and I precisely wanted to that it is wireless. to see that it won't install with MAC OS X 10.7.5... When I insert the instalation disc the message is "operating system is" the installer is not compatible with the version of the operating system on your computer. It is only compatible with 10.6 and below.

  is it possible for me to get this to work without having to plug?

  Hello

  Constitutes plug in the USB cable, it is necessary to configure the wireless connection.

  Then, download and install the software for your operating system below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107372-1&CC=UK&DLC=en&LC=en&OS=219&product=5224271&sw_lang=

  During the install you will be guided to configure the wireless connection, once the client software installation compelte it will inspire you to unplug the USB cable.

  Kind regards

  Shlomi

• OfficeJet 6500 E710n - software installation on Mac OSX 10.9.3 Mavericks of scanning

  Hello

  I run Mac OS - X 10.9.3, and I recently installed software Officejet 6500 E70n-z (embeded in OS - X) to the printer of the same name. It prints fine, but when I go to use the "scan" function, the software says "software for this device is not installed - software to scan for this printer is currently unavailable." Please contact the printer manufacturer for the latest version of the software. It is quite frustrating. I tried to delete the installation and reinstallation, but without success. I tried the analysis of other software such as 'image capture' or 'Preview' but get the same message.

  Someone at - it indexes? I'd rather not rush out and buy a new scanner!

  Hello Nickoroacho,

  Welcome to the HP Forums!

  I understand that you are unable to scan a document using your E710n Officejet 6500. I will do my best to help you! Now, with the 10.9.3 drivers, it is only a base available for your printer printer driver.

  Please follow this HP document how Scan: OS X v10.9. Click "Scan without the HP software", as that document provides three ways to scan a document.

  Also, try to fix permissions of the drive on your computer by following this document Apple here. Make sure that all the Apple updates are done by following this document Apple here.

  If you have any other questions, please let me know. Have a good night!

• Installation of Mac with Officejet 6700 problems

  I try to install the disk that came with my Officejet 6700 and he tells me that it can't open because it works on the OS 10.7 or below, and I OS 10.8.2.  Y at - it somewhere that I can download a new version of the material so that it will be compatible with my printer?

  Hello

  Download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107209-1&cc=us&DLC=en&LC=en&OS=219&product=5058338&sw_lang=

  Don't forget to select HP Software recommended when installing to get full functionality.

  Finally, after completing the installation, restart your Mac and run the software update to ensure that your drivers are up-to-date.

  Shlomi

• Lightroom 6.7 update installs on Mac osx El capitan

  I tried to upgrade my lightroom 6.6 to the last 6.7 on mac osx el capitan BUT says lightroom update successful, but the version is still 6.6 6.7 someone with the same problem?

  I found a way to solve this problem and now my lightroom has been updated LR 6.7 and works perfectly, transfer and editing CRAW2 files from my Canon 5 d Mark IV.

  1. I downloaded all my mac osx el capitan updates on the appstore.

  2 remove completely all adope file and remove lightroom from my Mac.

  3. download LR application installation and update of LR 6.7 of the adobe Web site: Install Photoshop Lightroom

  4. run the installer and install fresh new LR 6.0

  5. open the file LR 6.7 and update

  7. start LR and its update to 6.7

  (I tried this process twice before it works)

  Hope will work for all you canon 5 d mark iv out there.

• Problems of apps Cloud creative installation/sync (Mac)

  Hello

  For some time now Adobe CC would not update the applications installed on my Mac (El Capitan) and some days I noticed also that the program wasn't working at all and I couldn't even start (after clicking on it, nothing happening).

  I decided to uninstall all applications, CC to uninstall and reinstall everything.

  The installation of Adobe CC went OK and I moved and installed Illustrator.

  My second attempt was Photoshop that is stuck at 85% (I left it overnight).

  Now, I'm at the point where the application Adobe CC displays a rotating disk when I click on the applications tab, I can't yet see the installed applications.

  On the same day, my second installation on a Windows PC 10 works fine, updates etc.

  These issues were really frustrating and already caused delays in my work.

  The problem has been resolved by a remote of a member of the support team help because it is quite complex and have not solved here.

• CC of Photoshop (2015) installs on Mac

  Hey,.

  Just some general info:

  I am running OS X El Capitan 10.11.4 on a Macbook Pro. I installed Adobe Illustrator trial without any problem. I tried, in vain, to install the trial version of Photoshop CS (2015) for shit almost two days now. I know this is an old problem and I read several other threads with the same or similar issue. However, I still have not solved anything. I am considering to make PS CS 2015 but do not know if it would be a smart decision if the trial version does not work even on my mac.

  When I try to install the program by creative cloud or a separate - dmg file I get an error in the starting of the installation (which is 42% cloud creative).

  All I get is: "there was a problem installing Photoshop CC (2015) ' when I try to get more information about the encountered any error I get is a blank page - there is therefore no error code to identify.

  I tried to clear the tmp folder to read different newspapers, in order to wipe each adobe program (including, creative cloud, manager of Adobe and etc.) and re - install to remove records of AMMUpdater-EHC and other things proposed in various discussions of the forum such as these:

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Installation of Photoshop CC stalls at 42%

  Trial download Photoshop CC keeps freezing of 42%

  Re: crashes at 42% and direct installation fails

  I hope someone has an answer to this problem - because at this point, I'm puzzled. I have no idea what to do...

  Thank you

  George

  Please see the links below:

  do not download photoshop when 42% through creative cloud?

  Failed installation

  Note:

  Try to install once the root user account. If this does not work, then you can move forward for the manual procedure of removal and relocation complete.

  Also one last thing, the deletion process may affect the trial of Illustrator CC 2015 period, but if the lawsuit says expired you can always install and try out the CC 2014 version for 30 days, Im just being honest. But I'm sure that the steps will work.

  However, if you wish you can also get technical assistance from the Adobe Support:

  [Click the button still need help and select the Chat option]

  Contact the customer service

• Problem with installation on mac OS

  Hello, I just subscribe to a subscription creative suite package and well I installed photoshop, illustrator and indesign on my laptop. The problem is on my 2nd computer fixed at home, a mac with OS X 10.6.8 operating system... I started installation and get a message that the operating system is no longer compatible pour the new version of photoshop. Do you know if there are solutions? my mac is not old and I would really like to work on it. Thank you

  Adobe Creative Cloud is only compatible on Mac OS X 10.7 and above versions.

  However, for any Mac OS version as version 10.6.8 Snow Leopard, you can install Adobe Application Manager using which you can connect and install the version of Adobe apps compatible with your computer.

  Only few CC as InDesign version can be installed on Mac OS X 10.6.8

  Other applications, you can install the CS 6 version.

  Example:

  https://helpx.Adobe.com/InDesign/system-requirements.html#InDesign%20CC%20system%20require elements

  You can see CC 2015, CC 2014 is not compatible with Mac OS X 10.6.8 but the CC version is.

• AdobeHelp stops first elements Installation on Mac

  I'm trying to install Adobe first 10 items for my Mac. I'm having a problem where, when the Setup program tries to install "AdobeHelp" is completely stops the installation. It looks like this.

  I know that on Windows, you can close a specific task by using the Task Manager, but I don't know how I would approach this issue under Mac OS. I'm on Mac OS X 10.11 El Capitan.

  I really need this problem. Thank you.

  Please check:

  Resolve system errors, freezes | Mac OS 10.x. Adobe software

  Troubleshoot installation | Photoshop Elements, Elements first. Mac OS

  Instructions for installation in silent mode. Adobe Premiere Elements | Version of volume license | Mac OS

  Concerning

  Stéphane

• Creative Cloud Desktop for installation failure Mac

  I try to install the Office of creative cloud for Mac (Yosemite), and in the middle of the download/installation, the window simply disappears. Someone knows this? I tried almost everything I found here on the forum. Already uninstalled the previous tried CCCleaner, rename the folder, I disabled the firewall... and nothing. Any tips?

  Trash Adobe Creative Cloud and Adobe Application Manager of utility records.

  Run the Adobe Creative Cloud Cleaner tool.

  If present, select the option - Adobe Application Manager for Mac OS X 10.6

  (it will appear as 10.6 on all the Mac version)

  Then click on clean up selected.

  Then try to install the creative Cloud desktop application:

  https://creative.Adobe.com/products/creative-cloud