UN - nest multiple elements

Similar Questions

• Can I batch nest, multiple clips on the timeline?

  I have several clips in my calendar ~ 200 +.

  My final goal is to export them all out as separate clips.

  I understand that I must first nest each clip and then put them in a bin export to the SOUL from there.

  Problem is, I have to right-click on each item and select niche, then I must name it... so with 200 clips I have 400 shares to achieve this result.

  Issues related to the:

  1 is there a way I can automatically nest each element in the timeline so that they remain as separate clips?

  2. each nested element can cause a unique name such as 001,002,003, etc...

  

  Thank you in advance.

  Jeremy

  Mark the first clip, her tail.  Mark the second clip, he tail.  Go to the bottom of the line of the sequence for each clip.

• Masking multiple elements with dynamic action me gives error

  Hello
  
  I have a selection list, and I tried to create a dynamic action on this subject. When the list is zero I want to hide items. The problem is that I thing 200 articles on my page and when I try to list them all under the dynamic action, it gives me an error or cut off my list. I tried created two separate actions of dynamics, but it did not work. Any suggestions? Any help would be so appreciated. Thank you!

  The problem is that I thing 200 articles on my page and when I try to list them all under the dynamic action, it gives me an error or cut off my list.

  Is it that you were able to cross the mark of products/page 100? But the official documentation has to say otherwise:
  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21674/limits002.htm#BGGIECDF

  It is possible to define and to return more than 100 items on a page, but you will get a 404 error when running if you submit a page with over 100 articles (including the hidden objects and elements of page zero). You will not be able to present and process a page that has made more than 200 points. You will be able to set more than 200 items in your page and send, and then process the page If the actual number of elements returned is limited to 100 or less by using permissions and conditions.

  * Specify error messages you received

  Error message: error failed to create dynamic action.
  ORA-20001: error creating dynamic action sub-action name = "NATIVE_HIDE" id = "" ORA-01461: can bind to a LONG value only for insert into a LONG column > "

  You seem to have exceeded a 4000 or 32 K bytes on a column of metadata for dynamic action when you set the dynamic action. Because you cannot use all 200 points at the same time, you must create multiple dynamic actions that correspond to some subsets of items are actually rendered.

• What is the best way to always increment at index 0 only for an array of multiple elements?

  The principle is to complete a worksheet of left right in the same line but the increment of the column letter only (IE - B4 and C4 etc.). Herewith, I adapted an existing example VI that works for an array of 2 elements (ie - B4) but does not work for a 3-element array (ie - B40, B50 becomes). Keeping simple, what is the best way easier to modify my existing code to always check that the size of the table and the index automatically return to 0 to correctly increment the first letter only (IE - B) and not the number (IE - 4)?

  Thank you!

  Barry

  Instead of 'index automatically to zero', why not just make a zero instead of the size of table manipulation-1-1?

  Of course it will all fall apart once you get to column Z.

  Also look into the Board of Excel.   Do not post question.  This is just a link to the other discussions related to Excel.  Some of them might give you ideas how to manipulate your cell references.

• management of nested multiple displays

  Hello

  I'm new to HTML5/Javascript from the Java world. I'm used to model pushScreen/anti-pop. How can I go do the same type of behavior in HTML5? My first thought is to create multiple HTML pages. However, when I click on the first page to the second page, how to pass parameters to the second page to open it with the desired data shown?

  Thank you

  Very quickly off the coast to my head. Using JQuery for simplicity:

  
  
  function init()
  {
     showLogin();
  }
  
  function showLogin()
  {
      $('#aboutDiv').hide();
      $('#loginDiv').show();
  }
  
  function hideLogin()
  {
      $('#loginDiv').hide();
  }
  function showAbout()
  {
      $('#loginDiv').hide();
      $('#aboutDiv').show();
  }
  
  function hideAbout()
  {
      $('#aboutDiv').hide();
  }
  
  
  
  
  
  
  
      
   LOGIN SCREEN CONTENT 
  
  
  
      
   ALL ABOUT ME 
  
  
  
  
  

  Not necessarily CSS, but your div has a class of course.

  When I hide/show my divs, I make sure to clear out by innerHTML = ", to try and keep the DOM as small as possible. Believe me, you don't want to lose the memory on things that are not displayed, or you will quickly encounter questions.

• Add multiple elements of Web App?

  I have a web application that is a review web app. It allows a person write a review, choose a few different sizes, then write the review. All in all, a very simple web application.

  I want to see the average rating based on reviews from total. In other words, to loop through every element of web application, take the side (side is a custom field), total ratings, take the total and divide it by the number of sides, thus giving you the average on your side.

  That I'm stuck, I know how to loop through an element totalling ratings that it loops through each element giving me the total score that I can run and then liquid on it to get the average rating.

  How do you do that?

  What about this:

  {module_webapps render="collection" id="reviews" filter="all" collection="reviews" template=""} 
  
  {% assign divisor = 0 -%} {% assign sum = 0.0 -%} 
  
  {% for review in reviews.items -%}     {% if review.rating and review.rating != blank -%}         {% assign divisor = divisor | plus: 1 -%}         {% assign sum = sum | plus: review.rating -%}     {% endif -%} {% endfor -%} 
  
  sum: `{{ sum }}` divisor: `{{ divisor }}` average: `{{ sum | divided_by: divisor }}` 
  

• Retrieves the value of the XML attribute for multiple element sequence

  Guys,
  
  I have already posted this in the forum XML DB, but some of you could help me.
  
  
  I have searched for a solution for this and couldn't quite. I'm trying to get multiple entries in a node attribute values. It workes for a single node, but for many nodes, it fails. Could you please give me a solution?
  
  

  SQL> select extractvalue(column_value, '/WORLD/COUNTRY/@NAME') COUNTRY_NAME
    2        ,extractvalue(column_value, '/WORLD/COUNTRY/CITY/@NAME') CITY_NAME
    3        ,extractvalue(column_value, '/WORLD/COUNTRY/CITY/@POPULATION') POPULATION
    4  from xmltable('WORLD' passing xmltype('
    5  <WORLD>
    6  <COUNTRY NAME="INDIA">
    7  <CITY NAME="MUMBAI" POPULATION="10000"></CITY>
    8  </COUNTRY>
    9  </WORLD>'
   10  ));
   
  COUNTRY_NAME CITY_NAME POPULATION
  ---------------------- ------------------ -------------------
  INDIA MUMBAI 10000

  When I execute the same for several nodes, it fails, please guide me. Please also let me know how to handle if I have an XML file that contains this data.
  
  

  SQL> select extractvalue(column_value, '/WORLD/COUNTRY/@NAME') COUNTRY_NAME
    2        ,extractvalue(column_value, '/WORLD/COUNTRY/CITY/@NAME') CITY_NAME
    3        ,extractvalue(column_value, '/WORLD/COUNTRY/CITY/@POPULATION') POPULATION
    4  from xmltable('WORLD' passing xmltype('
    5  <WORLD>
    6  <COUNTRY NAME="INDIA">
    7  <CITY NAME="MUMBAI" POPULATION="10000"></CITY>
    8  <CITY NAME="CHENNAI" POPULATION="2000"></CITY>
    9  <CITY NAME="BANGALORE" POPULATION="13000"></CITY>
   10  <CITY NAME="HYDERABAD" POPULATION="14000"></CITY>
   11  </COUNTRY>
   12  </WORLD>'
   13  ));
  select extractvalue(column_value, '/WORLD/COUNTRY/@NAME') COUNTRY_NAME
                                                                    *
  ERROR at line 1:
  ORA-19025: EXTRACTVALUE returns value of only one node

  See you soon
  Sarma.

  So, this is the first step:

  SQL> with test as
    2  (select xmltype('
    3                 
    4                 
    5                 
    6                 
    7                 
    8                 
    9  ') resp from dual)
   10  select country
   11       , cities
   12  from xmltable('WORLD/COUNTRY' passing (select resp from test)
   13                         columns country varchar2(50) path '/COUNTRY/@NAME'
   14                               , cities xmltype path '/COUNTRY/CITY') world
   15  /
  
  COUNTRY         CITIES
  --------------- --------------------------------------------------
  INDIA           
  

  two columns, a varchar2 and an xmltype.

  Then do the same with the second column, pass the XML to the function XMLTABLE

  SQL> with test as
    2  (select xmltype('
    3                 
    4                 
    5                 
    6                 
    7                 
    8                 
    9  ') resp from dual)
   10  select country
   11       , cit.name
   12       , cit.population
   13  from xmltable('WORLD/COUNTRY' passing (select resp from test)
   14                         columns country varchar2(50) path '/COUNTRY/@NAME'
   15                               , cities xmltype path '/COUNTRY/CITY') world
   16     , xmltable ('CITY' passing cities
   17                columns name varchar2(50) path '@NAME'
   18                      , population number path '@POPULATION'
   19                ) cit
   20  ;
  
  COUNTRY         NAME                                               POPULATION
  --------------- -------------------------------------------------- ----------
  INDIA           MUMBAI                                                  10000
  INDIA           CHENNAI                                                  2000
  INDIA           BANGALORE                                               13000
  INDIA           HYDERABAD                                               14000
  

• Problem using the list separated by commas with nested table element

  Hello
  
  I have a list separated by commas like this:

  H23004,H24005,T7231,T8231,T9231

  And want to create a function that creates a where clause clause for each element with an output like this:

  UPPER('H23004') IN (UPPER(charge))
  OR UPPER('H23005') IN (UPPER(charge))
  OR UPPER('T7231') IN (UPPER(charge))
  OR UPPER('T8231') IN (UPPER(charge))
  OR UPPER('T9231') IN (UPPER(charge))

  Here's my test function that is not working properly:

  create or replace function FNC_LIST_TO_WHERE_CLAUSE(v_list in VARCHAR2) return varchar2 is
   -- declaration of list type
   TYPE batch_type IS TABLE OF pr_stamm.charge%TYPE;
   -- variable for Batches
   v_batch batch_type := batch_type('''' || replace(v_list,',',''',''') || '''');
   return_script varchar2(1000);
  
   BEGIN
   -- loop as long as there are objects left
   FOR i IN v_batch.FIRST .. v_batch.LAST
   LOOP
     --DBMS_OUTPUT.PUT_LINE(offices(i));
     -- create where clause
     IF i = 1 THEN
       return_script := 'UPPER(' || v_batch(i) || ') IN (UPPER(charge))';
     ELSE
       return_script := return_script || ' OR UPPER(' || v_batch(i) || ') IN (UPPER(charge))';
     END IF;
   END LOOP;
  
   return (return_script);
   end;

  The out put looks like this:

  UPPER('H23004','H24005','T7231','T8231','T9231') IN (UPPER(charge))

  I don't know what I did wrong? It calculates the amount of the incorrect array element! (v_batch. Must be 5)
  v_batch. FIRST = 1
  v_batch. LAST = 1
  
  Kind regards
  
  Tobias

  Try this...

  declare
  text varchar2 (1000): = "H23004, H24005, T7231, T8231, T9231;
  v_where varchar2 (1000);
  Start
  Text: = text | «, » ;
  While instr (text, ',') <> 0
  loop
  v_where: = v_where | ' UPPER ("': substr (Text, 1, InStr(Text,',',1)-1) |") ' IN (UPPER (load)) OR ';
  text: = substr (text, instr(text,',',1) + 1);
  end loop;
  v_where: = substr (v_where, 1, length (v_where)-3);
  dbms_output.put_line (v_where);
  end;

  convert it to function...

• Need to concat multiple elements into a single element

  Hello, here's my challenge:

  Query:

  (SELECT XMLROOT

  XMLELEMENT ("Inv",

  XMLAGG)

  XMLELEMENT ("Invline",

  XMLELEMENT ('Category', i.category)

  XMLELEMENT ("Amount", i.amount)

  '')

  )

  ), VERSION "1.0"(, OUI AUTONOME).» EXTRACT ("/ *")

  DE)

  SELECT 1 AS corresponding inv_no, 'Work' AS category, 5 RISE FROM DUAL

  UNION ALL

  SELECT 1, 'their pocket', 10 OF the DOUBLE

  UNION ALL

  SELECT 1, 'Journey', 20 OF the DOUBLE

  UNION ALL

  1. SELECT 'Journey', DOUBLE 2.5) i;

  Returns:

  <? XML version = "1.0" standalone = "yes"? >

  < Inv >

  < Invline >

  Labor < category > < / category >

  < amount > 5 < / amount >

  < / Invline >

  < Invline >

  < category > refundable < / category >

  < amount > 10 < / amount >

  < / Invline >

  < Invline >

  Trip to < category > < / category >

  < quantity > 20 < / amount >

  < / Invline >

  < Invline >

  Trip to < category > < / category >

  < amount > 2.5 < / amount >

  < / Invline >

  < / Inv >

  Mandatory:

  <? XML version = "1.0" standalone = "yes"? >

  < Inv >

  < inv_no corresponding > 1

  Labor < details > 5

  Pocket 10

  Travel 22.5

  < / details >

  < / corresponding inv_no >

  < / Inv >

  So I would support combining the details in a field for transmission to the Mexican tax authorities (their calls spec for all the lines of the invoice be concated together).

  Note that there are two travel details that need to be summarized thus.

  I wish I can not change the query if possible, just using the XML features.

  Thank you!

  And your version of db?

  11.2 and beyond, you can use the aggregate LISTAGG function to concatenate the data type character in the whole of lines:

  SELECT XMLElement ("Inv"

  XMLAgg)

  XMLElement "(corresponding inv_no

  v.inv_no

  XMLElement ("details"

  listagg(v.category ||) ' ' || TO_CHAR (v.amount), 10

  the Group (order by v.category)

  )

  )

  )

  )

  DE)

  SELECT t.inv_no

  t.category

  sum (t.amount) as the amount

  DE)

  SELECT 1 AS corresponding inv_no, 'Work' AS category, 5 RISE FROM DUAL UNION ALL

  SELECT 1, 'pocket', 10 OF DOUBLE UNION ALL

  SELECT 1, 'Journey', 20 DOUBLE UNION ALL

  SELECT 1, 'Journey', DOUBLE 2.5

  ) t

  T.inv_no GROUP, t.category

  ) v

  GROUP BY v.inv_no;

• subqueries, nested, using elements of the other party of the request

  Hi all
  I have a delicate problem, and I'll try to explain my best:
  
  DB version is 11.2.0.3.0

  create table product_list (product_id number,
                  project_name varchar2(30))
  
  create table products (product_id number,
                  project_desc varchar2(30))
  
  create table total_counts (product_id number,
                  total_count number,
                  project_name varchar2(30))
  
  create table fixed_counts (product_id number,
                  fixed_count number,
                  project_name varchar2(30).
                      fixed_date date)
                      
  create table product_rating (product_id number,
                  rating number,
                  quarter_last_updated number)
                      
  create table quarters (quarter_id number,
                  quarter_end_date date)
  
  
  insert into product_list values (1, 'Prod 1');
  insert into product_list values (2, 'Prod 2');
  insert into product_list values (3, 'Prod 3');
  
  insert into products values (1, 'Prod 1');
  insert into products values (2, 'Prod 2');
  insert into products values (3, 'Prod 3');
  
  insert into total_counts values (1, 2000, 'Prod 1');
  insert into total_counts values (2, 1000, 'Prod 2');
  insert into total_counts values (3, 500, 'Prod 3');
  
  insert into fixed_counts values (1, 1, 'Prod 1', to_date('01/01/2013','DD/MM/YYYY'));
  insert into fixed_counts values (1, 3, 'Prod 1', to_date('01/01/2013','DD/MM/YYYY'));
  insert into fixed_counts values (2, 50, 'Prod 2', to_date('01/01/2013','DD/MM/YYYY'));
  insert into fixed_counts values (2, 2, 'Prod 2', to_date('01/01/2013','DD/MM/YYYY'));
  insert into fixed_counts values (2, 3, 'Prod 2', to_date('01/01/2013','DD/MM/YYYY'));
  insert into fixed_counts values (2, 3, 'Prod 2', to_date('01/01/2013','DD/MM/YYYY'));
  insert into fixed_counts values (3, 8, 'Prod 3', to_date('01/01/2013','DD/MM/YYYY'));
  insert into fixed_counts values (3, 3, 'Prod 3', to_date('01/03/2013','DD/MM/YYYY'));
  
  insert into product_rating values (1, 1, 1);
  insert into product_rating values (3, 2, 2);
  
  insert into quarters values (1, to_date('01/10/2012','DD/MM/YYYY'));
  insert into quarters values (2, to_date('01/02/2013','DD/MM/YYYY'));

  My current query joins actually 2 tables 'TOTAL_COUNTS' and 'FIXED_COUNTS '. The FIXED_COUNTS table is updated every day when a product has a patch against it and the query returns a list of all products and their "fixed" rate percentage (used in an interactive report of the APEX).
  

  select A.PRODUCT, A.TOTAL, B.FIXED, a.PROD_ID, round((FIXED/TOTAL) * 100,  2) percent
  from (
  select sum(a.total_count) TOTAL, a.product_id PROD_ID, d.Product_desc PRODUCT
  from total_counts a, product_list c, products d
  where a.product_id = c.product_id
  and lower(a.project_name) = lower(c.project_name) 
  and c.product_id = d.product_id
  group by a.product_id, d.product_desc
  ) A
  JOIN 
  (
  select sum(b.fixed_count) FIXED, b.product_id PROD_ID, d.Product_desc PRODUCT
  from fixed_counts b, product_list c, products d
  where b.product_id = c.product_id
  and lower(b.project_name) = lower(c.project_name) 
  and c.product_id = d.product_id
  group by b.product_id, d.product_desc
  ) B
  on A.PROD_ID = B.PROD_ID and A.PRODUCT = B.PRODUCT 

  It gives me a result like:

  PRODUCT     TOTAL     FIXED     PROD_ID     percent
  Prod 1     2000     4     1     0.2
  Prod 2     1000     58     2     5.8
  Prod 2      500     11     3     2.2

  The application works very well and does exactly the job I need. However, I now a requirement that when a product gets a percentage rate 'fixed' more than 1% of the product gets a point added against her in a table 'product_rating' and I have to recalculate the percentage of the date, the item has been added (so no points added we take all 'fixed').
  
  To do this, I added 2 new tables: "product_rating" and "quarters". The "product_rating" table contains the Product_id and points, he has accumulated so far. It is updated once a quarter. 'Quarters' table simply contains the dates for us to use for calculations again.
  
  Actually, I need to replace this:

  sum(b.fixed_count) FIXED

  with something like this:

  if a product has a point against it in the "product_rating" table then we just show fixes from the date the point was added i.e. 
  select sum(b.fixed_count) from fixed_counts b, product_rating c, quarters d
  where b.product_id = c.product_id and c.quarter_last_updated = d.quarter_id
  and b.product_id = PROD_ID
  and b.fixed_date > (select quarter_end_date from quarters where quarter_id = the_last_quarter_updated)

  Based on the values in the tables above the percentages for "3 Prod' should now be 0.6.» It is because he received a product_rating the quarter 2, then the new calculation is based on all the "corrections" after this date (only the last March 1 13').
  
  I tried many ways to integrate this into the current query, but I can't make it work. Sorry for not adding the info from the entire table, but the tables total_counts and fixed_counts have many more columns that I removed the query so it would be easier to observe. Thanks in advance for your help. If I can add more info ask please.
  Tom
  
  Published by: on May 14, 2013 TomH 08:54
  
  Published by: on May 14, 2013 TomH 08:58

  TomH wrote:
  of course, to the right, thank you.
  I added some info table and data that will hopefully a little easier to understand.

  OK, thank you... to the future but please try and run the commands yourself for you sure they work. What you provided is close, but it has not executed immediately without modifications.

  I will start by expressing my concerns for your data model, it seems... well, for lack of a better word. Although you said you deleted a bunch of stuff to make the example. You have someone, you you work who can look at the model for you?

  With respect to the query, it's not pretty (I'm in a bit of a rush here) so you can probably clean it considerably. I just tried to show the basics of what you're going to have to do.

  ME_XE? with base_data as
    2  (
    3     select
    4        b.fixed_date,
    5        b.fixed_count,
    6        b.product_id ,
    7        d.project_desc
    8     from fixed_counts b, product_list c, products d
    9     where b.product_id = c.product_id
   10     and lower(b.project_name) = lower(c.project_name)
   11     and c.product_id = d.product_id
   12  ),
   13     final_base_data as
   14  (
   15     select
   16        b.product_id      PROD_ID,
   17        b.project_desc    PRODUCT,
   18        sum
   19        (
   20           case
   21              when b.fixed_date >= stuff.quarter_end_date or stuff.quarter_end_date is null
   22              then
   23                 b.fixed_count
   24              else
   25                 0
   26           end
   27        )  as FIXED
   28     from base_data b
   29     left outer join
   30     (
   31        select
   32           pr.product_id,
   33           qr.quarter_end_date
   34        from product_rating pr , quarters qr
   35        where pr.quarter_last_updated = qr.quarter_id
   36     )  stuff
   37     on (stuff.product_id = b.product_id)
   38     group by b.product_id, b.project_desc
   39  )
   40  select A.PRODUCT, A.TOTAL, B.FIXED, a.PROD_ID, round((b.FIXED/a.TOTAL) * 100,  2) percent
   41  from
   42  (
   43     select sum(a.total_count) TOTAL, a.product_id PROD_ID, d.project_desc PRODUCT
   44     from total_counts a, product_list c, products d
   45     where a.product_id = c.product_id
   46     and lower(a.project_name) = lower(c.project_name)
   47     and c.product_id = d.product_id
   48     group by a.product_id, d.project_desc
   49  ) A
   50  JOIN final_base_data B
   51  on A.PROD_ID = B.PROD_ID and A.PRODUCT = B.PRODUCT
   52  ;
  
  PRODUCT                                     TOTAL              FIXED            PROD_ID            PERCENT
  ------------------------------ ------------------ ------------------ ------------------ ------------------
  Prod 1                                       2000                  4                  1                 .2
  Prod 2                                       1000                 58                  2                5.8
  Prod 3                                        500                  3                  3                 .6
  
  3 rows selected.
  

  See you soon,.

• cannot access the rows of a table not nested element

  What Miss me? I'm under Oracle 12 c (12.1.0.1.0)

  CREATE TYPE dim_O AS OBJECT )

  dimension_id number

  label_en varchar2()300( )

  );

  CREATE TYPE dim_T AS TABLE OF dim_O;

  DECLARE

  dims_t dim_T

  START

  SELECT CAST(MULTISET( )) 

  SELECT  DIMENSION_ID LABEL_EN

  DE    DIMENSIONTABLE -actual physical table in oracle

  OÙ   DIMENSION_ID IN (3001 3002 3003()

  ) AS dim_T) "dim_rec"

  BY dims_t

  DE    DOUBLE;

  FOR I IN dims_t. FIRST... dims_t. LAST LOOP

  DBMS_OUTPUT. Put_line() dims_t() I). dimension_id);

  END LOOP;

  -exit from the loop above is

  -3001

  -3002

  -3003

  -The following statement fails: cannot access the rows of a table not nested element

  UPDATE TABLE ( SELECT dimension_id FROM TABLE (dims_t) ( )

  Dimension_id SET = WHERE = dimension_id 3004 3003

  -The following statement fails: cannot access the rows of a table not nested element

  UPDATE TABLE ( SELECT dimension_id FROM TABLE (CAST (dims_t in dim_T () ) ( )

  Dimension_id SET = WHERE = dimension_id 3004 3003

  
  

  END;

  I'm trying to understand this example very simple, but to no avail.

  Can someone tell me why I get this error?

  Thank you all in advance for your time.

  Marc

  What Miss me? I'm under Oracle 12 c (12.1.0.1.0)

  CREATE TYPE dim_O () AS OBJECT

  number of dimension_id

  label_en varchar2 (300)

  );

  CREATE TYPE dim_T AS TABLE OF dim_O;

  DECLARE

  dims_t dim_T;

  BEGIN

  SELECT CAST (TYPE MULTISET)

  SELECT DIMENSION_ID, LABEL_EN

  OF DIMENSIONTABLE -actual physical table in oracle

  WHERE DIMENSION_ID IN (3001,3002,3003)

  () AS dim_T) 'dim_rec '.

  IN dims_t

  FROM DUAL;

  I'm IN dims_t.FIRST... dims_t.Last LOOP

  DBMS_OUTPUT. Put_line(dims_t (i) .dimension_id);

  END LOOP;

  -exit from the loop above is

  -3001

  -3002

  -3003

  -The following statement fails: cannot access the rows of a table not nested element

  UPDATE TABLE (SELECT dimension_id FROM TABLE (dims_t))

  SET dimension_id = dimension_id = 3003 3004 WHERE;

  -The following statement fails: cannot access the rows of a table not nested element

  UPDATE TABLE (SELECT dimension_id FROM TABLE (CAST (dims_t as dim_T)))

  SET dimension_id = dimension_id = 3003 3004 WHERE;

  END;

  I'm trying to understand this example very simple, but to no avail.

  Can someone tell me why I get this error?

  You get it because dims_t is an array of OBJECTS - not a table of scalars. But your SELECT statement returns scalar.

  There IS NO such object, named "dimension_id"; It is an ATTRIBUTE of the object DIM_O. DIMENSION_ID is a SCALAR which, as says the exception, is a "No nested table element; If you cannot select/Update lines of it.

  What you do is equivalent to the following:

  DECLARE

  dims_t dim_T;

  number of dim_id;

  dim_o design;

  BEGIN

  Design: = dim_o (3, 'ghi');

  SELECT DIM_O (DIM_ID, LABEL) BULK COLLECT INTO table DIMS_T (d_o);

  end;

  /

  ORA-06550: line 7, column 59:

  PL/SQL: ORA-22905: cannot access the rows of a table not nested element

  ORA-06550: line 7, column 1:

  PL/SQL: SQL statement ignored

  This SELECTION is trying to design it as a table when it's a SCALAR - so the same exception you get.

• Check for the existing XML element

  Hi all

  I'm writing a simple script first check if an XML element exists and creating so if it's not. I tried to change a piece of code that I used previously to do the same for paragraph styles, but apparently it's not that simple. Currently, all I get is the error "Unable to run the script in the 'main' target engine!" Without checking them, adding the XML element based on the result of the search works very well.

  /* Find all instances of the word "Superscript" */
  app.findTextPreferences.findWhat = "Superscript";
  var mySuperscript = myDocument.findText(); // Save search result for future reference
  
  /* See if an XML element named "Superscript" already exists, and create it if that's not the case; then add it to all instances of the word "Superscript" */
  var myXMLElementSuper = myDocument.xmlElements.item("Superscript");
  try {
  var myName = myXMLElementSuper.name;
  }
  catch (myError){
      var myXMLElementSuper = myDocument.xmlElements.add({markupTag:"Superscript", xmlContent:mySuperscript[i]});}
  

  Any help would be greatly appreciated!

  Regards and thanks in advance.

  Julian

  The myDocument.xmlElements always has a single element - the root element.

  If you want your element directly below that, you have to work a level down.

  To try-catch for such situations regular aid is bad because you spend so usually the ESTK option stop on exceptions and real problems don't miss. Use the isValid property.

  var rootXE = myDocument.xmlElements.item(0);
  var superXE = rootXE.xmlElements.itemByName("Superscript");
  if( !superXE.isValid )
    superXE = rootXE.xmlElements.add(...
  else
   superXE = superXE.getElements()[0]; // take first of potentially multiple elements
  

• Change the duration of multiple clips "as one" clip together?

  Here's my situation:

  I have a song to 127 BPM. I have a music video (muted) to 125 BPM.

  I spent a long time cut out excerpts of the video channels and muliple clips to form a chronology (but with a lot of clips and channels lined up).

  I now want to change the total length of the video clip to match the TEMPO of the song (which I should have done in the first place), but the video is, as noted earlier, sliced upward in mulitple clips in multiple channels. How do I change the duration of all the clips at the same time, where the end and the beginning of the clips still line up to eachother?

  It would be incredibly easy if there was a function non-breeders. Where can I nest multiple clips, change the duration and the UN - nest clips from clips of an overall duration slices changed. (Which is not possible. Yes, I can drag out of the nested charger clips, but the clips will still have the initial term).

  TL; DR: How can I change duration of multiple clips "as one" clip together?

  Never mind. I found an alternative solution. I used an expandable calculator at http://mp3.deepsound.net/eng/samples_calculs.php and time stretched all the clips to match the TEMPO of the song. Now I just need to break all the clips, which can be done one by one, but I found this trick to snap all clips at once: http://vimeo.com/27428526.

  I'll just let this thread remain open for each other with the same problem can find it

• Can't swap multiple instances of the same symbol

  Hey!

  So, I can select a symbol and exchange with one another, but why can't I just Exchange several instances of the same symbol?

  A useless limitation don't y ' All think?

  -Dwayne

  If you're talking about the replacement of one symbol by another of the library, which is limited to one symbol at a time.  But you can extend this functionality using JSFL.  Here is a link to a tool that might work for you...

  http://spiralstormgames.com/blog/code-snippets/quick-Flash-extension-swap-multiple-element s-at-once.

  If you have a thousand things to change, you can review your design uses a dynamic approach, except the investment items must be managed manually defined specific locations.   In this way, you can simply change the link between the symbol and the programming will take care of the rest.

• Analyze the flat file data in a nested structure.

  This has been driving me crazy all day long.

  I have a flat data file I want to analyze in a nested data structure.

  Small sample data:

  0 HEAD
  1 SOUR FTW
  2 VERS Family Tree Maker (16.0.350)
  2 NAME Family Tree Maker for Windows
  2 CORP MyFamily.com, Inc.
  3 ADDR 360 W 4800 N
  4 CONT Provo, UT 84604
  3 PHON (801) 705-7000
  0 TRLR
  

  If anyone recognizes this, yes it's a small piece of a GEDCOM file.  That's what I'm trying to analyze.  For someone who is not familiar with this data format.  The first number is the level of a data element.  Level 0 are elements of the root of a data segment.  Level 1 lines relate to the data of level 0 line previous closest.  Level 2 lines relate to the level 1 data line that precedes the closest. And so on.

  Here is an example of the desired output, the different elements to the related parent of nesting.

  <cfset foobar = {
   HEAD = {lvl=0,
   SOUR = {lvl=1,data="FTW",
   VERS = {lvl=2,data="Family Tree Maker (16.0.350)"},
   NAME = {lvl=2,data="Family Tree Maker for Windows"},
   CORP = {lvl=2,data="MyFamily.com, Inc.",
   ADDR = {lvl=3,data="360 W 4800 N",
   CONT = {lvl=4,data="Provo, UT 84604"}},
   PHON = {lvl=3,data="(801) 705-7000"}}}},
   TRLR = {lvl=0}
  }>
  
  <cfdump var="#foobar#">
  

  I think I'm looking at a kind of recursive function to embed these data correctly, but I just can't figure out how to do.

  I have this basic function that will display each line of data in a separate structure key

  <cffunction name="parseFile">
       <cfargument name="file" required="yes">
       <cfargument name="line" required="no" type="string" default="">
       
       <cfscript>
            var returnStruct = structNew();
            var subStruct = structNew();
            var cur_line = "";
            var next_line = "";
            var line_lvl = "";
            var line_key = "";
            var loop = true;
            
            if (len(trim(arguments.line)) EQ 0) {
                 cur_line = fileReadLine(arguments.file);
            }
            else
            {
                 cur_line = arguments.line;
            }
            
            do {
                 if (not FileISEOF(arguments.file)) {
                      next_line = fileReadLine(arguments.file);
                 }
                 else
                 {
                      next_line = "-1";
                      loop = false;
                 }
                 
                 line_lvl = listFirst(cur_line, ' ');
                 cur_line = listRest(cur_line, ' ');
                 line_key = listFirst(cur_line, ' ');
                 cur_line = listRest(cur_line, ' ');
                 
                 returnStruct[line_key] = structNew();
                 returnStruct[line_key]["level"] = line_lvl;
  
                 cur_line = next_line;
            } while (loop);
            
            return returnStruct;
       </cfscript>
  </cffunction>
  
  <cfscript>
       gedcom_file = FileOpen(getDirectoryFromPath(getCurrentTemplatePath()) & "Ian Skinner.GED","read");
       /*gedcom_data = {individuals = structNew(),
                      families = structNew(),
                                           sources = structNew(), 
                                           notes = structNew()};*/
                                           
       gedcom_data = parseFile(gedcom_file);
  </cfscript>
  
  <cfdump var="#gedcom_data#" label="Final Output">
  

  I tried many ways to recursively call this function in order to nest the elements.  None of them have produced await in the above example of hand coded output.  Which made me the closest is recursive call, the function parseFile() towards the end of the while loop if the following line is greater than the current level of line:

  if (listFirst(next_line,' ') GT line_lvl) {
       parseFile(arguments.file,next_line);
  }
  

  
  It works pretty well, as long as the next level of line is the same as or higher than its previous level of the line.  But once the next line level is lower, the recursive call will not return to the appropriate parent level.  The current function call ends just on a loop on the data file.  Everything that I tried to provide a correct output for recursive function calls when the next data line belongs to a line parent just a horribly distorted data.

  Yes, that's exactly it. I think that the node must always be added to the stack.

  I just had a period gave me. But that's what I thought.

  That is to say...

  While (not FileISEOF (gedcom_file)) {}

  line = fileReadLine (gedcom_file);

  extract data from the node

  node = {};

  node.LVL = listFirst (line, "");

  line = listRest (line, "");

  key = listFirst (line, "");

  If (listLen (line, "") gt 1) {}

  node. Data = listRest (line, "");

  }

  Download the most recent ancestor of the battery

  lastNode = stack [1];

  If it is a brother/ancestor, look for its parent

  While (arrayLen (stack) & node.lvl lte lastNode.lvl) {}

  arrayDeleteAt (battery, 1);

  lastNode = stack [1];

  }

  Add to the stack

  arrayPrepend (stack, node);

  Add this node from its parent

  lastNode [key] = node;

  }