Unable to access or connect to the updates of Windows. Error code: 0x8007043B

Similar Questions

• Not able to download the updates of WIndows Error Code 80246008

  Moose title: System Update updates microsoft windows

  My Windows 7 will not update anything. Error code 80246008. Help?

  Hello

  Follow the steps below and check if they help to resolve the issue.

  Method 1:

  I suggest to refer to the link below and follow the troubleshooting steps to resolve the problem.

  Windows Update error 80246008

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80246008

  Method 2:

  If the method above is not enough to follow, then you can run the Windows Update Troubleshooter.

  Access the link below for more information:

   Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  You can also check:

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

• 66A of the updates of windows error code failed

  I went through all the solutions help and error codes displayed but cannot find this error code for my updates not installed anywhere. Any suggestions please?

  Has 66 error code when trying to install KB2160841
  http://social.answers.Microsoft.com/forums/en/vistawu/thread/52538332-710e-4C29-BD5B-d08db7555bb3
  (Follow the steps described in this post by Diana D)

  Also, try the following steps (credit: Control_tps):

  1. go in programs and features, click on it.

  2. scroll to the bottom for Microsoft.Net Framework 4 Client Profile, do a right click.

  3. we will give you a choice of uninstall/change, click it.

  4. then it will give a choice to repair, choose repair.  It will take about 4 to 10 minutes to repair (with my PC), your experience may vary.

  5. Once finished, go to your update and new Update Center.

  See also: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f1dd866f-85b7-4ae6-bc32-1c488c19742a
  Diana D. (Microsoft Support) credit

  J W Stuart: http://www.pagestart.com

• Media Player cannot connect to the server - Original COOD2EE7 error code

  Tried media player - tools - options-network. Cannot configure the Protocol / the proxy settings. Streaming proxy settings area is empty.

  Hello Adelek,

  Thank you for posting.  It seems that you may have a firewall problem.  I that you would suggest to check your firewall settings to see if it's to allow access of media player.  I've also included some basic information about this error.

  Please let me know if this helps you.

  You got the C00D1198 error message when you use Windows Media Player. The following information can help you resolve the problem.

  Unable to connect to the server

  Windows Media Player cannot connect to the server that hosts the content you want to listen to. You may encounter this error message for the following reasons:

  • The name of the server that hosts the content is not valid. If you typed an address Uniform Resource Locator (URL) in the open URL dialog box, verify that the file name is spelled correctly and that the path to the file is correct, and then try again. If you clicked a link on a Web page, the link isn't valid.

  • The server is not available (for example, the server is busy or not online). Try again later.

  • For Windows Media Player proxy server settings are not configured correctly. Verify that your proxy server settings are correct.

    To check your proxy server settings

    1. Click the arrow below the now playing tab, and then click More Options.

    2. Click the network tab.

    3. Check your settings in the Streaming proxy settings area.

       Note

       • If you don't know what your proxy server settings should be, on the network tab, select a Protocol, click on configure, then select Autodetect proxy settings or use the the proxy settings of the browser (available for HTTP protocol only).

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to download the updates I get error Code 800 B 010 & error Code 66

  Original title: I Keep Getting error 800B 010
  -----
  
  When I try to download the Dates, I get error Code 800 B 010 & error Code 66

  Hey, Joe Zerilli,

  1. you remember to make changes to the computer before this problem?

  Step 1:

  You can check the following link and try to run the system update readiness tool and check:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Step 2:

  You can also read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Hope this information is useful.

• Cannot install updates for Windows, error code: 0x800703F1

  Original title: Windows update

  Hi people, whenever I try to install an update, I get the 0x800703F1 error code which I also get when I try to enable the hyper-v that can could stop my freezing problems. I'm in Windows 8.

  Things I've tried so far
  • 1.DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  I ran the two commands cmd and apparently, even after the second command, I get error code 1009 indicating that it is still corrupt.

  It could be a second option which I could have tried and which is the following:

  "Start in Safe Mode, click Start, run, in the open air: type".

  Scanreg /fix
  Click OK or press ENTER.
  Reboot into Normal mode and repeat the update of Windows. »

  But it seems that I get an error that windows can not find?
  In any way, any help from you guys would be appreciated.

  1 REPOST: When (exact date preference) your current subscription to AVG expire? ["Next year: don't cut!"]

  2. What is the number of the last 3 KB three updates that have been installed successfully under your update history? [1]

  3. What does "deleted everything until regedit" means? Have you been messing around in the registry & delete things or...?

  4A. What is the full name of the registry cleaner you are using?

  4B. you have backups of ALL the registry changes cleaners have ALREADY made to your system? [1]

  ===========================================================
  [1] injudicious use of registry cleaners can play a role here. TIP: If you ever think that your registry database must be cleaned, repaired, boosted, point, healed, twisted, fixed, magnified, "swept" or optimized (it isn't), read http://chris.pirillo.com/are-registry-cleaners-safe-to-use/ or http://www.edbott.com/weblog/2005/04/why-i-don ' t-use - Registry cleaners / and then draw your own conclusions.  Related-online http://support.microsoft.com/kb/2563254

• Unable to connect to the updates of Windows

  I am unable to connect to Windows update.  I use VISTA and receive the following error message:

  • Updated Windows cannot currently check the updates because the service is not running.  You may have to restart your computer.

  I rebooted several times without success.  Also, I update is enabled, so I'm at a loss to know what to do.

  Your output indicates a problem with the BITS service.

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit and menu file - import and bits_vista_32.reg of importation.

   

  https://SkyDrive.live.com/redir?RESID=E2F0CE17A268A4FA! 171

   
  It should work on 64 or 32-bit vista.

  Reset.

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  SC config BITS start = demand
  SC start BITS
   
   

• Unable to connect to the wireless network, Windows error cannot communicate with the device or the reaource (primary DNS server)

  Original title: internet connection problem

  Hey,.

  I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:

  1. Windows cannot communicate with the device or the reaource (primary DNS server)

  2. the connection between the Internet and your access point, router or cable modem is broken

  3 problem with access point or wireless adapter

  I think it's an effects of virus or something?  Because yesterday it works really well. How can I fix? Thank you very much

  Hello Hildegard Lydia,

  You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.

  What is the brand and model of your computer?

  Please follow the steps mentioned below:

  Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
  I suggest you try to reset the TCP/IP stack.
  http://support.Microsoft.com/kb/299357

  Method 2:

  I suggest that you refer to the following link:

  Why can't I find a wireless network?

  http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7

  Method 3:

  See the steps in the following link and check:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please an update on the status of the issue to help you further.

• Unable to connect to the server... error code 0 x 80070043

  Hey you all.

  We have a server on the network that contains the software and the data we use in a client/server parameter. To install the client side, we do the following from the workstation:

  START / RUN / \\10.20.0.77 which opens a window on the software on this server. Run us Setup.exe and everything is good on the client computer after installation is completed successfully.

  I have not had any problems to access to the / mapping for this server to Windows XP and Windows Vista Business 32 b, but on a Windows Vista Business 64-b system, I am no longer able to connect to the server via the net use or net shareor the map network drive feature. The following error occurs:

  "10.20.0.77" is not set up to establish a connection on port "File and printer sharing (SMB)" with this computer.

  It is possible to access this server by using a web browser, but the software install that way. The error code associated with the start was 0 x 80070043.

  I say "originally" because after researching on the net, a single thread suggested changing the NetBIOS default value " Enabled" for this network card Protocol. After you make this change, the error code as amended in 0 x 80070035, but the description remained the same as those listed above.

  Another thread said the server was to port 139 for mapping research, but Vista has been maps on port 445. Since I can't access 10.20.0.77 server to carry out changes, its installation rinetd solution and implement a file etc/rinetd.cfg to it remapped 445 to 139 is not possible, especially since our network is ENORMOUS and it could affect workstations running without any problem.

  Anyone here heard, or familiar with this type of problem for helping to find a solution?

  Thank you muchly. :)

  Cole

  A teacher affects eternity: he can never tell where its influnce judgments.

  Hello Aj. Cole,.

  I have a couple of thoughts for you, but since you're talking about server and workstation, I guess that you are in a domain environment. If so, then your problem of not being able to connect to a server would be better served in a forum that would be dealing with server and domain issues.

  However, the error message, 0 x 80070043 - the network name cannot be found

  Ensure that you have sufficient access to SMB file transfers (this requires ports NetBIOS open because SMBS use the NetBIOS protocol to transfer data).

  You can also check to see if the Vista workstation has a gigabit card. If so, look for the following local strategy.

  Enable the policy local to always wait for the network at the start of the computer and logon . To do this, follow these steps:

  1. Start the Group Policy Editor (gpedit.msc).
  2. Expand Local Computer Policy\Computer Configuration\Administrative Templates\System\logon.
  3. In the results pane, click always wait for the network when starting the computer and logon and then click Properties.
  4. On the setting tab, click active, and then click OK.
  5. Restart the workstation.

  You don't specify what your domain environment, so I don't know which forum send you as Windows 2003 SBS etc. Use the following link to find a good forum for you.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Hope this helps

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Disabled Internet access after you apply the updates of Windows

  After you have installed the latest Windows updates, I lose all connection to the Internet. I can still see my network, but not do anything on the internet.

  I spent an hour yesterday on the phone with my ISP check it was their system, not a hardware problem with my modem or router.  I spend another 1/2 hour on the phone with Dell technical support.

  It turns out the issue was my DNS has been altered, and the only way to recover was to perform a restore of the system for 8/16.  Everything was going well after that... until Windows Update automatically ran last night, install the last two so-called critical updates. I don't know what is causing the problem, but my DNS was wiped out again, and I had again back 8/16 recovery point.

  I disabled Windows Update for the moment because I don't know how else to solve the problem; in the absence of any change to my system, I suspect it's updates are something to my DNS. Does anyone else have this problem? Is there a better solution or another way to solve the issue that doesn't require me avoid all Windows updates in the foreseeable future? Is there a way to know if/when a later critical update solves the problem created by these?

  The cause has now been identified as McAfee updates and no Windows updates - they were both released at the same time.  If one of your PCs have McAfee so that they might be confusing your test results.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary.  The McAfee link applies to consumer products but there are corresponding communications for businesses - see, for example,.

  Corporate KnowledgeBase - DAT-6807/6808 causing problems with VSE 8.8.x

  I have McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, as ads from McAfee have said since then, the application did not refer to his database of threats correctly [so, eventually, the variation in the degree of severity in the user experience]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the McAfee Development removal a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  - - - - - - - - - - - - -

  If you do not have McAfee then Windows update that kb2705219 could be another cause that uninstalling that appeared to solve the problem for some users.  But, personally, I think they could only reached a temporary fix [I thought my PC was OK at the time, but it turns out does not do the trick, as explained above] to uninstall an update - panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

• Unable to upgrade to Windows 7 Ultimate Windows 10. Maintains the update failure. Error code: 80240020

  Hi team,

  I use a Lenovo Thinkpad T410 with Windows 7 Ultimate Version Service Pack 1.  The available size on the disk on drive C is 14.3 GB.

  I get a Windows Update notification that says thank you for the reservation of the update. I had booked this about 3 months ago and yet I did not update, where most of my friends have had updates in India. I am now in the United States.

  I have already downloaded all the recommended updates necessary, only options are updated optional is not installed (most module language service pack).

  When I checked my history of update, I found the Windows 1 Pro update has repeatedly failed with the error code: 80240020.

  I don't know what is happening, so kindly help me.

  If my version is not eligible for the update, then please send a notification, so that I can cancel my reservation for Windows 10.

  Forward to your response.

  N.B. - Please see the screenshot attached below.

  Sincerely,

  Yacoub Nandy

  The fastest way to get the upgrade is to download the ISO.  Year ISO is like a dvd in order to to use, you need to right click > go up.  Begin upgrading Windows.
  
  
  WARNING: do not USE NOT THESE TO DO A CLEAN the INSTALLATION (before after you have already updated).  If you do you will not be able to activate it without having previously upgraded to win 10 and active.  Then, you will be forced to reinstall your previous operating system before the upgrade to win 10
  Running the tool of creation of media warning can prevent you to roll back to a previous operating system

  The official download Final Windows 10 is now available Use the download tool to create ISO support to update your windows. http://www.Microsoft.com/en-us/software-download/Windows10 Use tool download now (32-bit version) http://go.Microsoft.com/fwlink/?LinkId=616935 Use tool download now (64-bit version) http://go.Microsoft.com/fwlink/?LinkId=616936

• I try to install the updates and still error Code OX643

  I have a XP system and I try to update each time I get an error Code OX643 I'm just an average user nothing special on my computer. Help, please

  The system says a security update for Microsoft .NET Framework 1.1 SP1 on Windows XP 2008 x 86 (KB2656353) has failed.

  Hi ClydeShaffer,

  Follow the troubleshooting steps in this document to resolve the problem with the error 0 x 643. If these troubleshooting steps do not resolve the problem, please let us know and also provide the PA information be requested.

• Windows Vista Home Edition: Cannot check/install updates to Windows error code: 8007005

  I recently had problems with Windows Update to update correctly.
  The error code I get when I tried is: 8007005

  Please help!

  Hello

  It is a very difficult to solve. What are the items in the KB if it has shown that the installation of not?

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
  Windows Server 2008 R2 Release Candidate for Windows 7 Release candidate
  http://support.Microsoft.com/kb/947821

  Those are kind of prerequisites and probably will not solve the problem.

  Products of security/antivirus/antispyware are a known cause, so you can turn them off like
  as the test (and that sometimes not really totally removes their influence).

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on
  Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005
  http://support.Microsoft.com/kb/968003/

  Its usually a permissions problem:

  Please check this link and those that he sites.

  Work your way through my 3 posts here.
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/200f5140-c2dd-48a5-8CDB-0d8c82ade3cf

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Cannot install updates of Windows Error Code 0x8020000D

  original title: 0x8020000D error Code

  Windows XP update not install, error message Code 0x8020000D, looking for a solution or explanation.

  Hey arlo,.

  You are not able to install updates?

  You can follow this link & check if the problem persists:

  How to reset the Windows Update components?

  Hope the helps of information.

• Update for windows error code explore 9 80092004?

  I am trying to download an update for windows explorer 9 but it keeps failing with error 80092004 code. What this mean and how can I solve this problem?

  Hi KWJ1985,

  You can find the troubleshooting steps in this thread useful to resolve the 80092004 error.

  Let us know if that helps.