Similar Questions

• Dell Inspiron N5110 webcam not working not

  I am unable to do video calls on my laptop. It says install a webcam...

  srilatha_5884,

  PLEASE READ AND ANSWER THE QUESTIONS THAT I ASKED, BELOW.

  Recently install you / reinstall the operating system? If so, have you installed the drivers I have the right order? How to download and install drivers in the correct order

  Try to read...

  Troubleshoot the Dell Webcam and the Dell Webcam Central software

  Also try running the Webcam Diagnostics

  The webcam showed in the tree of the symptoms?

  Error messages?

  The computer is under warranty?

  Rick

• (Redirected) The DELL INSPIRON N5110 processor fan does not work

  Hello

  I encountered a real problem with the fan to the processor in my laptop, it does not work, and when I run the diagnostic tests, I get this:

  error code: 2000-0511

  MSG: the preocessorfan did not properly.

  have you encountered the same problem?

  What can I do in this case?

  Thanks in advance

  Best regards

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Download webcam drivers for dell inspiron n5110

  Hello

  I went through all the messages to find any download link for my dell inspiron N5110 webcam but found nothing.all links redirected to a page that shows the sequence of message.

  "The details for this driver are currently unavailable. "Please try again later".

  help with kindness,

  Yasser

  Okaaaaaay. I obviously did too. Nothing happened. I did what you told me and nothing works.

  I'm sorry, but each of your 'suggestions' are things that I did before I came on this forum.

  Please, take the time and help me solve this issue rather than the reading of a troubleshooting guide.

  Thank you.

• No connected webcam dell inspiron n5110 support

  No webcam taken supported detected on dell inspiron n5110

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with Dell Support, online documentation and drivers (update or reinstall), and
  their forums.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• The speakers aren't working not on dell inspiron n5110 but headphones are

  Hello

  I have a dell inspiron N5110. He recently had a new hard drive mounted. Upon his return, no sound can be heard through the speakers inbult but sound can be heard with headphones.

  I am running Windows 7 Home premium 64-bit.

  The speakers are set to the default device in read mode.

  The pilot is IDT High Definition Audio CODEC and is fully updated.

  Any ideas?

  It is a non technical procedure of common sense for anyone who can use a screwdriver - but it's a job long enough. For a person unfamiliar with the tools at hand he would not be the first project, they should try.

  Clear a space to work on and a towel or something underneath to help catch the screws removed. Put the screws in containers and label those who are different from the rest.

  Before pulling a cable to see if there is a locking mechanism.

  When you follow the links to the service manual it will open in your browser, but you must download it and open it in Adobe Reader in order to view properly. It is a pdf file.

  Open it in Adobe Reader on another computer if you have one available, or print Adobe Reader, and then follow the instructions step by step, when you work on your laptop...

• Reinstall Windows 7 since the recovery on a laptop Dell Inspiron N5110 Partition after FORMATTING of C:

  Hello

  I desperately need HELP! I formatted my laptop Dell Inspiron N5110 and reinstall a copy of windows 7 after noticing several virus on my pc. But I doesn't not delete or format the Partition recovery. The recovery partition is intact. I now have to recover my pc to the factory of origin of windows settings , but I don't know if it's possible and how. I didn't know I could just use the Dell Datasafe from the beginning before formatting my pc (stupid I am). I handed a letter to the recovery partition (f) and know I can see all the files included in it. After searching for a while, some people suggesting to run the cmd following under 'Tools' dir (ED I can't find):

  imagex /apply f:\dell\image\factory.wim 1 c:\
  

  Can someone help me please? I really need help with that! Can someone give me instructions what to do?

  Thank you

  Chris.

  Hello

  Don't need you to worry, by making use of the formatted partition recovery software you can easily recover files after formatting the hard disk partition. Few days back, I spent the same similar problem where in lost some important files due to the installation of the OS. Then I tried this recovery software which really helped me to recover files after the installation of the operating system. So, you can download this software by following the below mentioned links.

  Page link: www.recoverformattedpartition.com/file-recovery-after-formatting-during-os-re-installation.html

  Download link: www.recoverformattedpartition.com/.../recoverformattedpartition-windows.exe

  Good luck

  Seley

• DELL INSPIRON N4010 WEBCAM QUESTIONS: PLEASE HELP... DELL CUSTOMER... AND ANYONE WHO HAS KNOWLEDGE REGARDING MY PROBLEMS...

  I have a Dell Inspiron N4010. Configuration: 1st generation i5 processor with windows 7 home basic 64-bit.

  3 months after the purchase of my laptop, I have updated my Dell webcam central through the applications update service... Shortly after the update, my integrated webcam has started to show problems.

  DESCRIPTION OF THE PROBLEM:

  Shortly after the update of my installed factory Dell webcam central, my integrated webcam has begun to show the problem. webcam was able to start with any application such as Skype or dell central webcam himself. Instead, webcam LED flashes for flicker of a second, and then goes away without any streaming video.  Trying to open it, an error message is displayed: "your webcam can be used by another application. Close the application to launch streaming video".» Initially, the problem was temporary, that is occasionally the webcam began video streaming without any problem, but as the time passed, webcam stopped working almost completely.

  TRIED SOLUTIONS:

  I tried all the solutions mentioned below:

  • I uninstalled the Dell webcam software and reinstalled with the version installed in the factory, supplied on CD with laptop. Uninstalled the webcam via the Device Manager and reinstalled, but without success.
  • I heard that there is a conflict between the Dell face recognition software and dell webcam central. So, I uninstalled the dell face recognition software. After that, the webcam worked for a few days, and there still rebooted problem.
  • I went through various forums online, dell community, customer service, etc. and everything suggested tried but without success. I heard several times that this is not a hardware fault but driver error. Even in a few forums, its says that Creative Technology Limited have not been able to supply webcam drivers compatible with windows 7 64-bit.
  • I even did factory restore my laptop twice, but could not do my webcam works.
  • Then, I decided to format my system and installed windows7 again with the disc that came with my laptop. During this process, I have kept the recovery drive and the untouched OEM disk untouched. I have reinstalled all the drivers in such order as advised by Dell. Despite puts everything in order, I couldn't do my built-in webcam work. More... now I can't even access the Dell factory restore option despite the fact that my recovery disk is intact and it is to have all the files into it!
  • I tried the utility dell online Diagnostics. He could not detect any error webcam!
  • Few days back, I used the dell startup screen diagnostic utility and scanned the built-in webcam to find errors, and my webcam failed in all tests! Here are the screenshots of the tests:

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  I GUESS I GAVE ENOUGH INFORMATION THAT CAN HELP TO DIAGNOSE THE PROBLEM WITH MY DELL INTEGRATED WEBCAM... I ASKED DELL CUSTOMER SERVICE TO HELP ME SOLVE MY PROBLEM OF WEBCAM... AND ALSO THE FACTORY RESTORE INACCESSIBILITY PROBLEM... PLEASE HELP ME...

  AFTER AN ENTIRE WEEK OF UNINSTALLING - REINSTALLING VARIOUS DRIVERS & SOFTWARE FOUND IN THESE FORUMS, SUGGESTIONS INCLUDING REINSTALLING WINDOWS FROM DELL DATA SECURE BACKUP.  THIS IS WHAT I LEARNED.

  My problem was. No supported webcam not connected when I ran dell webcam central. No program could access the webcam. Device Manager showed SPECIFIC DEVICE. Camera suddenly stopped working! I had a little more hair when this problem started.

  I have Inspiron N4010 windows 7 Home premium. Are the drivers for the webcam in windows 7, there is no separate drivers available anywhere. with the exception of some XPS models.

  A post in these forums suggests to abolish the plastic around the display bezel. It's simple. Just carefully go around and remove. It is clipped without screws on my system. This gives access to the webcam hardware. I got dell webcam central on-board. (showing no supported webcam connected!). Gently, I tried to disconnect the connector of the webcam. My intention was to disconnect and reconnect. I barely touched and the fire came and windows immediately started to install device drivers. A beep and an icon in the notification bar popped up. A few minutes, I saw my beautiful mug on the screen to my absolute delight.

  Guys, if you have a problem where Device Manager does not recognize your webcam for most probably, this is a hardware problem. The small rectangular plate on which is mounted the webcam is not properly secured by DEll. It is a DESIGN PROBLEM. The Board is located in place on two small round plastic holders without any screws. It can move easily. The bezel plastic when it is installed itself that holds it in place, but not very effective. When you open and close the lid of the screen, especially if you are taking in the middle where the camera you finally loose connector. That's why some messages will tell you what they camera has stopped working suddenly and then started working by himself all of a sudden. When I put the bezel plastic, it snaps into place, I was able to move the camera, and it stopped working again. A little gentle jiggle got running again and its been since.

  It does not matter what version of central webcam you have in windows 7. It runs on windows Vista service pack 2 compatibility mode. (Find WEBCAMDELL2. EXE file under programs x 86-dellwebcam-dellwebcam Central-dell webcam central. Right-click on the file name. Select Properties. Select the Compatibility tab and run this program in compatibility select windows vista service pack 2).

  If in your case even though there might be a software problem. always try this simple 2 minute solution b4 safe spending frustrating days find the drivers and software. Hope this post helps someone. May work on other systems too! Good luck! and thank you to the guy who led me down this path and misery!

• Dell Inspiron 1525 webcam problem.

  I use a Dell Inspiron 1525 laptop since 2008 and now the webcam is not working. I noticed that when I turned on the laptop, I get a flashlight blue color on the left side of the webcam, but now I do not understand that the blinking light. I installed the drivers from the dell support center webcam, but still it does not work. I bought this from a GCC country & now I'm in Sri Lanka, so I'm in two minds whether to get this repaired here or no reasoning that I don't know somewhere appropriate here. It'll be a big help, if I get a solution for this online.

  TKS

  Sébastien

  Hi Sebastian,.

  It was answered several times for you, please see the post following as an example:

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/f0123339-de5a-4D36-9ebf-cca67238ec06

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Battery Dell Inspiron N5110 shows 3 minutes but this last up to an hour.

  I use Dell Inspiron N5110. I use the original dell and charger battery. When the battery is fully charged. Just after 2 minutes it shows the battery. It decreases very quickly. When he reached up to 3 to 5 minutes of the end. but in fact it lasts almost an hour. but it keep say remaining 3 per cent or 5 per cent remaining, it is question of battery or do I need the bios update.

  Hi asupc,

  Thanks for posting.

  There are more experts available on the Forum of the laptop that can help with this question, however, I can try to answer here.

  Normal is between a year and 18 months. Here is some information about laptop batteries that you might find useful.

  If you are still under warranty, your battery will be covered by the warranty on the equipment you bought your computer. If this isn't the case, you can buy a new Dell, parts - People.com or Discount Electronics.  Be careful with the Chinese "knockoffs" as they would have been the cause of several fires.

  If you need assistance, please contact me private.  Thank you.

  Kind regards
  Robert

• Dell Inspiron N5110 does not support Windows 10?

  I'll try once more to make this post to cause the previous, it never went live.

  I have a 3 years old Dell Inspiron N5110 i5 / 8GB ram/Nvidia/Win 7 home premium and I am very pleased with his performance and build quality. Yesterday, I tried to book a copy of Windows 10 and after struggling to make the pop icon in my taskbar, I managed to get it jump.

  When I clicked the Get Windows 10 icon to get the reserve he came with this message...

  

  "BIOS is not supported.

  I have 2 laptops more than 2-3 years older than my N5110 and both are qualified and reserved for the update...

  I'm running the newest BIOS A11, all updates windows and the most recent drivers for this machine and wanted to ask you:

  Is it me or other users of N5110 this message?

  Any other update BIOS I is missing to get sound to work?

  Dell will solve this problem, until July 29 and when Windows 10 go live?

  A formal response or if there is an official link to Dell for this question would be appreciated.

  Just update your BIOS to A11, waiting for some time (a few hours or a day) and everything will be Ok.

  It works but not supported by Dell.

  Thanks to you all.

• failed to update bios dell inspiron n5110

  Hi, I perform me a BIOS on Dell Inspiron N5110 update to the latest version of the bios, when the laptop has become inactive, more fan began to operate at full speed. I couldn't even turn the machine off by pressing the power button. At the end I had to pull the battery and power cord. Now its dead
  (No activity at all). How can I restore bios?

  Dell inspiron N5110

  Service number:

  BIOS recovery solution Dell N5110 fo

  1. download the latest firmware from the Dell support
  2. save the exe file and create a shortcut with the following parameter: "/writehdrfile."
  3. launch the shortcut created and it will create a renaming of the file n5110a11.hdr the file to N5110.hdr
  4. create a shortcut with the following parameter exe file: '/writeromfile. '
  5. start the shortcut created and it will create a renaming of the file n5110a11.rom the file to DQ15A11.rom
  6 copy the two files 'N5110.hdr' and 'DQ15A11.rom' to a fat folder as root of the USB
  7. remove the charger and battery from the laptop
  8. plug in the USB
  9. press on & keep END
  10. plug the charger (always keep the END)
  11. the laptop starts automatically and displays the recovery screen
  12. press on enter and wait until the end of the flashing
  13. press ESC to reboot
  14. I hope that fixed the problem

• (Redirected) Dell Inspiron N5110 does not start

  Hi, my laptop Dell Inspiron N5110 is now 3 years old. I recently had a hard drive fail, then replaced by a new. Now the machine does not start. I have a boot disk in the DVD player that swirls, but gets no further. I get also is no longer the screen Dell displays (before the windows one). In fact, everything is empty. I tried to remove the power supply by battery pack and power holding down the button for 1 minute then re - again no difference. Is there anything else I can do or is the death machine?

  Thank you

  Daniel.

  Please repost this in the laptop computer forum for faster assistance.

  http://en.community.Dell.com/support-forums/laptop/

• Install Windows 7 x 64 on a new Dell Inspiron N5110 with NoOS

  Hello! I recently bought a new Dell Inspiron N5110 with NoOS. Now, I am trying to install Windows 7 Professional x 64 on it from a USB. I made this a hundred times, but now I'm stuck with a problem. After the beginning of the installation it shows me a message:

  A required CD/DVD device driver is missing. I f you have a driver disk, CD/DVD or player of the USN, please insert it now.

  I tried to google for answers to this problem, the only thing I found is that the laptop does not all SATA drivers installed and asks me to install some. However, I can't figure out how to do this. The system doesn't see another Flash DRIVE with drivers on this subject and if I copy the drivers to the root of the USB which I am startup also fails to find the drivers.
  How can I solve my problem? Any help is appreciated. Thank you!

  I fix this plug in USB2.0 flash boot, when the plugin USB3.0 discovers same error message.

• How can I get Dell inspiron N5110 to 10 Windows?

  Original title: window updates

  How can I get my dell inspiron N5110 in windows 7 be upgraded to window 10, Dell said it was not among the models he tested for Update window 10.

  Dell statement why would you want to force it?

  Without driver support Dell you would be silly to force an upgrade.

  But if you want too,

  Just buy a new hard drive or ssd and replace the existing one and keep it in case the 10 is not training.

  Download the iso and make it bootable on cd or flash drive and install win - 10 to the new disk.

  https://www.Microsoft.com/en-us/software-download/Windows10