Unable to access the store using the proxy server.
I'm in Windows 8. I'm unable to access the app Store. He said:-"we were not able to connect to the Store.This could not have come because of a problem with the server or the connection network has expired. Please, wait a few minutes and try again.and some other applications also. I use a 1.1 proxyserver (squid) that requires basic authentication.
However I m able to use some of them as weather, maps, etc.
I read solutions who suggested to temporary disable firewall and antivirus for test, I even try it but fails again.
Other suggestions where has been going for windows 8.1 upgrade level, but how can I get this update, as it is downloaded in store that I can't access. Help, please.
Hi Anand,
Your computer is connected to a domain?
Using a proxy server can allow the administrator to limit access to the Internet.
You can reduce the effect of these problems by allowing unauthenticated through your proxy server access. We recommend that you enable unauthenticated access only for connections to URLs used by each application that has a problem. Some proxy servers may suggest that you create a list of URLs (also known as the 'white list') permissions.
Please refer to the article to address these issues that relate to the use of Windows Store apps or use of Microsoft applications that are included with Windows Update or Windows 8, you can include the addresses mentioned in the article in a list of permissions ('white list') on your proxy server and enable HTTP and HTTPS access for them :
The use of proxies authenticated with Windows 8
For more information, see the article:
Using the Proxy selection and Proxy bypass lists
You can also consult the steps by Rajesh Govind, Support Engineer, may 4, 2013 and check.
Windows 8 apps not able to detect the proxy for my machine settings.
Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.
Tags: Windows
Similar Questions
-
Error message - unable to find the proxy server - how can I solve this problem
When I try to enter some sites I get the error message: unable to find the proxy server, Firefox is configured to use a proxy server that is not found. It happened all of a sudden and I don't know why or how I can fix it, it does not help that most help site are blocked. I'm using a Mac 10.5.8 and Firefox 15.
Set not to use any proxy.
Firefox> Preferences > Advanced > network > setting > don't score no proxy
-
MY mail server hardisk full so cannot start services & also unable to access the mail server
I have the server messaging, but Hardisk ful then failed to start Services and also unable to access the e-mail mail server troubleshooting steps.
Hello
The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
I'm unable to access Apple Store after the iSO download 9.3.1 on iPhone 4S. How can I fix this problem?
What happens when you try to access the Apple Store app?
-
I can't access my hotmail account among some other sites since the upgrade to 3.6.8 on my macbook. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings to make sure they are correct. Contact your network administrator to make sure that the proxy server is running. "I can not even find the proxy settings more.
Windows: Tools > Options > advanced > network > settings
OSX: Firefox > Preferences > advanced > network > settings
Linux: edition > Preferences > advanced > network > settings
Set your settings to connect to the 'No proxy', if you are not using a proxy.Firefox 3.6.6 added a new preference for connection settings, use proxy Panel"system settings", and the default value is the point. " This new preference does not affect most users, because they probably do not have a proxy set in place in their operating system. Therefore, most users should use the setting "no proxy".
-
Unable to access the network using Edimax N300 universal Wi - Fi extender
Original title: Edimax Extender will not get internet access
I naoual got a N300 Eimax universal Wi - Fi extender but I am unable to connect to the internet. They suggest setting up near the wi - fi access point to get the signal stronger and I got to show connected in the window ' currently logged in ', but it does not connect to the network. EDIMAX has proposed upgrading the firmware, but I was unable to get any joy with that either. Anyone with any ideas would be appreciated.
Hi Gofchap,
Thanks for the question of validation in Microsoft answers community!
I imagine the frustration you feel when you are unable to access the network.
The problem may be because of the Extender, diverter, or with the network adapter.
1 did you do changes on the computer before the show?
2. do you receive any error messages?
3. What is brand and model computer?
4. have you tried to connect without using the extender?
I suggest you to visit:
Wireless and wired network problems
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
Unable to access the app store for Windows
When I try to open the Windows store it tells me that I am not connected to the internet, even if I am and won't let me access all the apps in the store. I can surf the web and do everything else on the computer but not open the app store.
When I try to open the Windows store it tells me that I am not connected to the internet, even if I am and won't let me access all the apps in the store. I can surf the web and do everything else on the computer but not open the app store.
First, clear the cache of the Store by opening a run window (Windows Logo key + R), by typing wsreset and pressing ENTER.
If it does not heal (it probably won't), check the internet connection, either press the Windows Logo key + X (or right click on the lower left corner) and choose Control Panel > small icons > Internet Options > Connections tab > LAN Settings (bottom) and remove the Proxy Server tick > OK, etc.
-
remote VPN and vpn site to site vpn remote users unable to access the local network
As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config
The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.
ASA Version 8.2 (2)
!
host name
domain kunchevrolet
activate r8xwsBuKsSP7kABz encrypted password
r8xwsBuKsSP7kABz encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group dataone
IP address pppoe
!
interface Ethernet0/1
nameif inside
security-level 50
IP 192.168.215.2 255.255.255.0
!
interface Ethernet0/2
nameif Internet
security-level 0
IP address dhcp setroute
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
passive FTP mode
clock timezone IST 5 30
DNS server-group DefaultDNS
domain kunchevrolet
permit same-security-traffic intra-interface
object-group network GM-DC-VPN-Gateway
object-group, net-LAN
access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 Internet
IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
LOCAL AAA authentication serial console
Enable http server
x.x.x.x 255.255.255.252 out http
http 192.168.215.0 255.255.255.252 inside
http 192.168.215.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dynmap 65500 transform-set RIGHT
card crypto 10 VPN ipsec-isakmp dynamic dynmap
card crypto VPN outside interface
card crypto 10 ASA-01 set peer 221.135.138.130
card crypto 10 ASA - 01 the transform-set RIGHT value
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
Telnet 192.168.215.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
management-access inside
VPDN group dataone request dialout pppoe
VPDN group dataone localname bb4027654187_scdrid
VPDN group dataone ppp authentication chap
VPDN username bb4027654187_scdrid password * local store
interface for identifying DHCP-client Internet customer
dhcpd dns 218.248.255.141 218.248.245.1
!
dhcpd address 192.168.215.11 - 192.168.215.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Des-sha1 encryption SSL
WebVPN
allow outside
tunnel-group-list activate
internal kun group policy
kun group policy attributes
VPN - connections 8
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
kunchevrolet value by default-field
test P4ttSyrm33SV8TYp encrypted password username
username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
username kunauto attributes
Strategy Group-VPN-kun
Protocol-tunnel-VPN IPSec
tunnel-group vpngroup type remote access
tunnel-group vpngroup General attributes
address pool VPN_Users
Group Policy - by default-kun
tunnel-group vpngroup webvpn-attributes
the vpngroup group alias activation
vpngroup group tunnel ipsec-attributes
pre-shared key *.
type tunnel-group test remote access
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
: end
kunauto #.Hello
Looking at the configuration, there is an access list this nat exemption: -.
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
But it is not applied in the States of nat.
Send the following command to the nat exemption to apply: -.
NAT (inside) 0 access-list sheep
Kind regards
Dinesh Moudgil
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
-
Firefox is unable to access the internet
Hello
Firefox is unable to access the Internet. Internet in the phone works, because all applications in my phone are able to access the Internet. I tried to access several different web pages. Their work. The screen is all black, no error messages appear. The strange thing is that Firefox Sync seems to be able to connect to the server, and I can download plugins.
Best regards
Joel HedestigYou can try using the beta version of firefox mobile?
https://play.Google.com/store/apps/details?ID=org.Mozilla.firefox_beta
-
I get the attached error message when trying to access my gmail account "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. The problem started today. No problem before.
Second problem, though less of a problem - I'm using Firefox 16.0.2.I tried to upgrade to the latest version and received the following message "ERROR the requested URL could not be found.
I can still access my gmail account but my IPADHello robd, please check firefox > options > advanced > network > connection - settings... if firefox is configured to directly connect to the internet ('no proxy').
-
HP Envy Notebook dv6: unable to connect to the proxy server
I saw an error message "Unable to connect to the proxy server" when I try to connect to the internet via WIFI, even if the label shows who is connected to my home router.
HR63 wrote:
Thanks for the tip, there is so much information, the laptop with this problem belongs to my daughter and because she doesn't have an internet connection (can not download anything), there is another way to fix it?
I don't know because the online is where most of the instructions are locate in. I copy and paste the links here, but unless you can print them out or print the online pages it becomes hard, but here are the parts of the txt of it. +
http://malwaretips.com/blogs/unable-to-connect-to-the-proxy-server-removal/
How to remove "Unable to connect to the proxy server" (Virus Removal Guide)
This page is a comprehensive guide, which will remove "Unable to connect to the proxy server" virus from your computer and any other adware program that may have been installed during the installation process.
Please complete all of the steps in the correct order. If you have any questions or doubts in any point, STOP and ask for our assistance.
STEP 1: restore the default proxy to your machine settings
STEP 2: remove failed to connect to the ad software proxy server from Internet Explorer, Firefox and Google Chrome with AdwCleaner
STEP 3: delete impossible to connect to the proxy server with Junkware Removal Tool browser hijacker
STEP 4: delete impossible to connect to the virus pop up server proxy with Malwarebytes Anti-Malware free
STEP 5: check a second time for the "unable to connect to the proxy server" malware with HitmanPro
(Optional) STEP 6: delete impossible to connect to the proxy server of Internet Explorer, Firefox and Google Chrome adshttp://www.geckoandfly.com/9275/Internet-connection-error-unable-to-connect-to-the-proxy-server/
It is with IE
Step 1 - launch Internet Explorer
Step 2 - Click the icon "but" it looks like a gear wheel...
Step 3 - select 'Internet Options '.
Step 4 - Select the 'connection '.
Step 5 - Click Lan settings
Step 6 - uncheck "use a proxy server for your LAN (these settings may not apply to dial-up or VPN connections)."
Step 7 - click 'Ok' to save the changes
If you are using a proxy server, check your proxy settings, or check with your network administrator to make sure that the proxy server is running. If you don't believe that you should use a proxy server. Here's a video tutorial:
Also, if you can since I don't remember which browser your help that gave you this message that I had to go with IE as a default.
-
Virus & spyware definitions update failed.
error code: 0x8024402c.
Error description: Microsoft Security Essentials was unable to install the updates of definition, because the proxy server or target server names is not resolved.
Here is an article that meets your specific error message regarding updates:http://support.microsoft.com/kb/900936. I am surprised that the error occurs with all the updates, but there may be a difference between them that causes the problem for definitions, but not for others. I hope that this will solve the problem.
If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you. Please post with the information requested here:what to post in the Windows Update forum
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
We have a Nextbook but are unable to access the Internet at home
We have a Nextbook but are unable to access the Internet at home, even if we have a laptop and PC. How to solve this problem? Thank you.
Hi Vernon,
1. you are trying to connect the Nextbook to wireless (Wi - fi) network in your home?
It is a tablet based on Google's Android. As it comes to one product other than Microsoft, I suggest that get you in touch with the manufacturer about this issue. You can contact them at the following link:
http://www.nextbookusa.com/techsupport.php
Hope this information is useful.
-
Error message "unable to connect to the proxy server.
I use Google ChRome as my browser. Unable to connect to the Internet. Error message "unable to connect to the proxy server. I went to the settings and tried to change the proxy settings. When I uncheck the box "use a proxy server" it does not apply only change.when I click OK, it always comes back to the box is checked.
Chrome uses the Windows / IE settings proxy as do most of the browsers.
-
I'm unable to access the Web site rewards club mail
I'm unable to access the Daily Mail online REWARDS CLUB site WEB TO ENTER MY NUMBER ONE
Hi BrianSheridan,
1. what happens when you try to connect to the site?
2. you receive an error message?
3. what web browser do you use?
4. what version of IE are you using?
5. are you able to open the Web site in the other computer?
If you use Internet Explorer, then perform the following troubleshooting methods:
Method 1:
Optimize Internet Explorer, and then check how it works.
Check out the following link to optimize Internet Explorer.
How to optimize Internet Explorer
Note: This article is also applicable to Internet Explorer 9.
Method 2:
Also perform the following troubleshooting steps.
Can't access some Web sites in Internet Explorer
Method 3:
If you use Internet Explorer 9, then perform the steps in troubleshooting at the following link.
Some sites Web may not behave as expected in Internet Explorer
Maybe you are looking for
-
Why my Thunerbird have a learning disability?
Despite my marking regularly emails as junk or "not junk" number of recent iterations of Thunderbird are unable to correctly identify the continuous spam that contains mixed uppercase and lowercase letters in words, absolute gibberish that is not rec
-
iPad 2 and IOS 9.3 = brick
Like many others, my trusty iPad 2 is now a brick after update to IOS 9.3. I tried all of the following conditions: 1. connecting to another Wi - Fi network 2 connection via iTunes 3 recovery mode via iTunes 4 turn off / turn on back 5 force the res
-
How long is the Apple support its routers for?
Basically. I'm looking for a new router I would like to know how much time Apple support their routers for, I know bugs and security flaws are found quite often so I would like to know how long it will be before a router would stop receiving updates
-
Change the layout in StandardListItem
I have a following code: StandardListItem { title: ListItemData.article_name imageSource: "asset:///images/hide.png" } By default, the image is loaded on the left hand side, and I want to right-align the text remaining on the left. How can I get this
-
Error: ImportFiles::ImportFile: access denied to ' Cookies / /'
HelloI found an ERROR in the log file of van VMware EMU:2016-06-09 08:05:43.408 [INFO] import profile archive "Windows Cookies.zip" (\\fs.intern.local\medewerkers$\DCools\Windows\Windows Cookies.zip)2016-06-09 08:05:48.500 [ERROR] ImportFiles::Import