Unable to assign the IP of network profiles.

Similar Questions

• Unable to access the Windows 7 network or via router or ad hoc homegroup

  I have a very annoying problem. I have 2 computers clean. They were formatted and Win 7 ultimate was installed on both computers. They have a PCI card (D - Link DWA-525) wireless. Their material is identical, the same motherboard, etc., next to "Server" is the pentium 4 and the 'customer' is celeron.

  We have 2 routers and modem 1. The first router, Airport Extreme, serve as a DHCP server and provides the wireless network. The second router (TimeCapsule), supposed to be the first router ethernet extends wireless (Act as a bridge). I can connect to the network and the internet works fine.

  The problem is with the local network.

  I can see the two computers on the network tab. I can ping by IP and name. I made a Homgroup on the computer 'server '. The 'customer' computer is joined I can see the libraries. Firewall computer both are disabled. All firewalls, routers and modem are disabled.

  A double click of the library on the homegroup does nothing. Attempts to access the shared by \SERVER folder or by the tab network gives a "path network not found" error.

  Basis, such as the file and sharing, settings etc, are on. Password sharing is disabled. Encryption is 40-50 (not 128, I don't remember the exact number). It's both for the work at home and Public networks.

  Because I could not access the network, I decided to make a special one. Same problems. Even with the static IP address (192.168.0.1 [Server] and 192.168.0.3 [customer], 255.255.255.0 subnet) and NetBios forced to activated.

  I just can't make it work. I have tried many info from here and other forums, but nothing is working. The worst part is that another PC will join the network, but I have not do it again just because I can't do these PC to work. A test, I put the other PC on the network (Win 7 Home), and the same problem applied.

  All computers can see them in the network, two ping tab ways with IP and name, but when trying to access the pc via network, it gives the network not found error path.

  Yes, I shared files.

  Homegroup troubleshooting and network that find anything wrong or just can not solve the problem.

  Help, please!

  Hello

  The question you posted would be better suited in the TechNet Forums. We have a separate team working on these issues. I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?filter=AllTypes&sort=lastpostdesc

  Hope this information is useful.

• Unable to add the virtual machine network services

  Hello:

  I already read that warning Virtual PC 2007 is not compatible with win 7-64.
  However, I read that it is "unofficially" possible launch.
  OK, I installed it and it worked except networking.
  Basically, I need to install the Virtual Machine Network Services.
  I right click on my network card-> properties-> install-> services-> virtual machine network services (VPC2007 folder: where I can see VMNetSrv.inf)
  Then says Windows: it is impossible to add the requested feature. The specified service has been marked for deletion.

  The problem is that I get this error even on WinXP SP3, so I think that there is something else wrong.

  And of course, Virtual PC 2007 available networks are only: no connection, Local, NAT.  (Missing my physical adapter)

  Thank you!!!

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Hope this information is useful.

• Unable to see the info on Facebook profiles

  Since your last update the other day, when I go to someone's profile on facebook... None of their info provides information on the "wall"... it must be a cause of problem of firefox everything works fine when I use chrome... including my own!

  can I be the only one having this problem?

  I you thank everyone, but I think I found the problem... I used an extension called Timeline Remove... and now that I have turned off, everything is fine!

• Unable to connect the mouse Bluetooth, "network cable unplugged".

  Reformat my drive c:, Sony Vaio VGN SZ1VP Windows XP pro. Upgrade to SP3.
  Impossible to get Sony Bluetooth mouse works!. Have uninstalled and reinstalled Toshiba Bluetooth stack.  He sees the mouse but gives the error "failed to detect the service."  Also in network connections is to show "unplugged network cable."
  The mouse worked fine before reformatting. Help

  Axe79

  Installed the drivers from the Chipset (manufacturer disk) after you reformatted? Check out this link below and see if it helps you with your problem.

  http://support.Microsoft.com/kb/811798

• Network Assistant unable to finish the configuration of network domestic

  I'm trying to set up a network using the wizard, whenever I try to use the created dsc (Firewall window files are corrupt and cannot reset) I use Win XP on all computers. Firewall off

  There is no need to use the created disc.  Run the Configuration Wizard from the network on each computer by clicking on its icon in Start > all programs > Accessories > Communications . Boulder computer Maven
  Most Microsoft Valuable Professional

• Error: "unable to start the service Object Push Profile (OBEX OPP)" when trying to transfer files from the Android phone via bluetooth

  Original title: Android mobile phone via bluetooth, I get an error on my phone.

  When I try to send a file by my Android phone to my laptop via bluetooth, I get an error on my phone saying "cannot start service Object Push Profile (OBEX OPP)". Reason: The return value is "false", but I can send files from my laptop to my phone OK.

  Hi steve3624,

  We recommend to check if there is no parameter which must be activated on your phone, then try to transfer the file to your laptop.

  We also advise to check if there are any service name Object Push Profile and start it. To do this, try the following steps:
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, locate Object Push Profile service and double-click it.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click ok to apply the changes.

  For further assistance, please get in touch with the assistance of the Android team.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I change IP assignemnts in network profiles in the vRA

  A virtual machine has been provided through a VLAN defined in a network profile. An IP address has been allocated on the virtual computer network profile. All good but VM has then been changed manually to get a new IP and VLAN assigned by replacing the original AVP defined IP and VLAN. Anyone know how I can remove the old IP of the vRA network profile?

  From now on, that we develop a workflow vRO to allow users to perform work to change the custom properties of VM to then change the IP VM in the profile.

  Thank you

  Prestonville

  This isn't official supported, but you can do it in the database of the vCAC (here, through vCO):

  var date   = new Date();
  var query  = "UPDATE [dbo].[StaticIPv4Address]";
  query += " SET [Hostname] = ''";
  query += " ,[VirtualMachineID] = NULL";
  query += " ,[StaticIPv4AddressState] = 1";
  query += " ,[LastModifiedDate] = '" + System.formatDate( date,"yyyy-MM-dd HH:mm:ss" ) + "'";
  query += " WHERE [IPv4Address] = '" + IpAddress + "'";
  query += " AND [StaticIPv4NetworkProfileID] LIKE '" + networkProfile + "'";
  var resultRecords = database.executeCustomQuery( query );
  

  Kind regards

  Markus

• Error message "the service user profile Service has no logon. Unable to load the user profile"How can we get in the laptpop to solve the problem? /

  We get the error message "the service user profile Service does not logon, user profile cannot be loaded."  Prevents us from entering the computer laptop-so how to solve this problem?  Help?

  Hi LisaPie,

  Step 1: You can run the fixit available in the article below

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  If you cannot start the computer in normal mode, try the steps in safe mode with networking

  Step 2: Start the computer in safe mode with network. To do this, follow the steps below:

  Access the menu advanced startup options by turning on your computer and pressing the button F8 before Windows starts. Advanced startup options menu select SafeMode with networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Assign the profile to a server blade using script

  I had a UCS workshop this morning with one of my clients, and he asked me if there is a way to develop a script to remove the profle of one of the blades and re - assign a different profile for the same lame.

  Thanks for your input in advance!

  Should be possible.

  Take a look at some of the scripts available on the Cisco Developer Network site, using the API of the UCS:

  Examples (logon may be required to download):

  UCS (goUCS) automation tool

  Cisco UCS PowerTool for UCSM

  Thank you

  Michael

• remote VPN and vpn site to site vpn remote users unable to access the local network

  As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

  The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

  ASA Version 8.2 (2)
  !
  host name
  domain kunchevrolet
  activate r8xwsBuKsSP7kABz encrypted password
  r8xwsBuKsSP7kABz encrypted passwd
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  PPPoE client vpdn group dataone
  IP address pppoe
  !
  interface Ethernet0/1
  nameif inside
  security-level 50
  IP 192.168.215.2 255.255.255.0
  !
  interface Ethernet0/2
  nameif Internet
  security-level 0
  IP address dhcp setroute
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  management only
  !
  passive FTP mode
  clock timezone IST 5 30
  DNS server-group DefaultDNS
  domain kunchevrolet
  permit same-security-traffic intra-interface
  object-group network GM-DC-VPN-Gateway
  object-group, net-LAN
  access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
  tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 Internet
  IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  enable ASDM history
  ARP timeout 14400
  NAT-control
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  AAA authentication LOCAL telnet console
  AAA authentication http LOCAL console
  AAA authentication enable LOCAL console
  LOCAL AAA authentication serial console
  Enable http server
  x.x.x.x 255.255.255.252 out http
  http 192.168.215.0 255.255.255.252 inside
  http 192.168.215.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto-map dynamic dynmap 65500 transform-set RIGHT
  card crypto 10 VPN ipsec-isakmp dynamic dynmap
  card crypto VPN outside interface
  card crypto 10 ASA-01 set peer 221.135.138.130
  card crypto 10 ASA - 01 the transform-set RIGHT value
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 65535
  preshared authentication
  the Encryption
  sha hash
  Group 2
  lifetime 28800
  Telnet 192.168.215.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 5
  Console timeout 0
  management-access inside
  VPDN group dataone request dialout pppoe
  VPDN group dataone localname bb4027654187_scdrid
  VPDN group dataone ppp authentication chap
  VPDN username bb4027654187_scdrid password * local store
  interface for identifying DHCP-client Internet customer
  dhcpd dns 218.248.255.141 218.248.245.1
  !
  dhcpd address 192.168.215.11 - 192.168.215.254 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  Des-sha1 encryption SSL
  WebVPN
  allow outside
  tunnel-group-list activate
  internal kun group policy
  kun group policy attributes
  VPN - connections 8
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value split tunnel
  kunchevrolet value by default-field
  test P4ttSyrm33SV8TYp encrypted password username
  username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
  username kunauto attributes
  Strategy Group-VPN-kun
  Protocol-tunnel-VPN IPSec
  tunnel-group vpngroup type remote access
  tunnel-group vpngroup General attributes
  address pool VPN_Users
  Group Policy - by default-kun
  tunnel-group vpngroup webvpn-attributes
  the vpngroup group alias activation
  vpngroup group tunnel ipsec-attributes
  pre-shared key *.
  type tunnel-group test remote access
  tunnel-group x.x.x.x type ipsec-l2l
  tunnel-group ipsec-attributes x.x.x.x
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
  : end
  kunauto #.

  Hello

  Looking at the configuration, there is an access list this nat exemption: -.

  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

  But it is not applied in the States of nat.

  Send the following command to the nat exemption to apply: -.

  NAT (inside) 0 access-list sheep

  Kind regards

  Dinesh Moudgil

  P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

• Unable to set the ip address of network client hosted after the creation of WIFI hotspot.

  Original title: PROBLEM CONNECTING WITH MY LAPTOP WIFI HOTSPOT INTERNET

  Hi all

  I am able to use the Internet to my hotspot of the Tower, when the source of the internet is Public or private wifi.

  so I know the cmd commands of window for hotspot and the client settings (sharing of customer hosted network, address assignment IP etc.,)

  but the problem I am facing is slightly different

  I use my datacard to cdma wireless broadband as my source internet connection(Reliance netconnect +)

  When I try to create for this hotspot, as usual I am able to create the hotspot and be able to share the internet for hostednework customer.

  but I am unable to set the ip address for the network hosted client, if I try to put 192.169.137.1 and 255.255.255.0 ip

  as soon as I close the window, the IP also disappears

  When connect my android phone to this hotspot, it is able to connect, but there is no internet connectivity.

  When I check the client for transmission of package hostednetwork every two envoys and received packet is past, I mean transmitting

  So what caused the rupture in internet connectivity but success hotspot connectivity?

  check the screenshots...

  can u help me...

  It's a bit complicated

  

  

  

  

  Hi Daniel,.

  Advanced networking issues are supported in the TechNet Forums. I suggest you send the request in the TechNet community.
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking

  Hope this information helps.

• Change the subnet on the network profile

  Hello

  Like a fool I created 3 network profiles and paths using 16 subnets when they should have been 24. I wonder now to open firewall rules to route to other VLANs in 24 of the subnets. As its 16 and the two first parts are identical i.e. 10.2.X.X they don't route through the firewall

  The current VMS I can just go to manually change the subnet assigned to the NIC and they work.

  When I look at a network profile to change the subnet - it is greyed out

  Is there a way I can change this manually? so that the new virtual machines created with / 24 subnet and exisiting VMs I can manually change

  Or is the only way to delete the network profile and start over. How this affect the VMs running other than bulk can try and assign an IP address already in use?

  Thank you!

  You can try to update the database

  Find the name of the profile

  SELECT * from StaticIPv4NetworkProfile

  the name of the profile update

  Update dbo. StaticIPv4NetworkProfile

  Set SubnetMaskIPv4 = "255.255.255.0" where StaticIPv4NetworkProfileName = 'YOUR NETWORK PROFILE'

  Open the database in SSMS (SQL Server Management Studio) and run the SQL query when it is connected to your database of vRA. He has not supported but will most likely solve your problem.

  Or if you are not happy to do this directly through the database, you might try using the vRO vRA plugin and call the vCACEntityManager and update the StaticIPv4NetworkProfiles entity. My guess is the update of the database direct would be easier, but please take a backup and only update the field and nothing else.

• Assignment of IP with vCAC external network profile

  I joined vCAC and NSX, and note that the Service Edge router that gets deployed on a blueprint multi-machine receives 2 IP addresses on its unique "uplink" profile external network interface.  Here is my setup and what is happening.  Any help to understand why this would be useful.  Not a huge deal because it is a learning laboratory, but when I go to implement it in a production environment, I need to know if this is expected behavior, or if something is wrong because it effectively reduces the number of possible networks to deploy-able by half.  Again, not a big problem as this "transport network" (the section between the Edge Gateway manually deployed and dynamic Service Edge routers) will exist entirely in the vSphere environment and can be as big as a class A network, if necessary, it is however a huge waste of space IP I want to solve it if possible.

  Topology:

  I have a NSX Edge and the virtual wire (switch NSX L2) already deployed in the environment.  Within vCAC I have:

  -a reserve related to the dvPortGroup created by the NSX L2 switch

  -an external network profile that is used to configure the port to uplink of dynamically deployed NSX routers edge of Service to connect to the LAN segment between the dynamic ESR and the switch of NSX Edge/L2, already deployed

  -a profile of NAT network 1 number which is used to configure the virtual machines deployed from vCAC plans

  -a vSphere vCAC VM blueprint pointing to a snapshot of a virtual computer within the environment vSphere (linked clone deployment)

  -a plan of multi-machine vCAC which contains the above plan and assigns a network interface to the virtual machine and using the profile of network NAT 1 to configure the IP settings on the virtual machine.  MM master plan contains only a single VM in order to test the dynamic creation of network and IP assignment features/integration between vCAC and NSX.

  Topology resulting, once the virtual computer is deployed:

  Edge (deployed manually) NSX gateway

  v

  v

  NSX L2 Switch/Virtual Wire (deployed manually

  v

  v

  NSX edge router Service (deployed as part of the deployment of the vCAC action plan)

  v

  v

  VM (deployed as part of the deployment of the vCAC action plan)

  In theory what needs to happen is that when I ask a resource of the Architecture SDSE MM:

  1. the ESR is deployed with 2 interfaces: 1 for the external network configured with an IP address available on the corresponding subnet and 1 for internal NAT network configured with the IP address of the default gateway is configured in the profile of NAT network.

  2 NAT rules and treatment of traffic are automatically configured in the ESR

  3. the virtual computer is deployed and configured with a NETWORK adapter with the configurations appropriate IP such as specified in the profile of NAT network.

  
  What is actually happening:
  1. the ESR gets deployed with 2 network cards; 1 NETWORK card for uplink to the external network, which gets 2 IP addresses on the subnet (instead of 1) 13 and 1 NIC for the default gateway of the NAT had network configured with the IP address of the NAT network default gateway.  Steps 2 and 3 still occur.

  Hi Jeremy,.

  It is the expected behavior. If you deploy an edge manually, you will be asked for a 'IP management', and then an IP address for the use of the uplink. It is the second IP source address. If you were to use a NAT, you get an additional IP address for each VM on the NAT's segment.

  See you soon,.

  Grant

• There is no network profile from the drop-down list

  Vcac 6.0.1

  Hello.  I created a network profile and assigned an ip address range.  I am now trying to choose the profile to network within the reserve, and he does not appear.  I select the network in the network tab and then click the menu drop down and there is nothing there.  What I'm missing here?

  Thank you

  Jamey

  What type of network profile you created? I think that if it's something other than external, he will not come unless you have configured VXLAN.