Unable to boot into Windows PE with MDT and SCCM

Similar Questions

• I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means?

  Windows recovery disc 32-bit error code meaning version question

  Hello
  I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?

  You don't give any info on what was the original problem with the computer.

  You have set the Bios Setup to boot from the CD/DVD drive?

  At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.

  And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?

  Use up arrow key to do this, press on enter.

  Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.

  See you soon.

  Mick Murphy - Microsoft partner

• JRockit boots into windows in a splash and dies

  JRockit Version 4.1

  Windows 7 Eneterprise

  I used normally for a click all programs > JRcokit Mission Control 4.1 and it used to work smoothly without any problems. All of a sudden, it started to drop.

  I tried Google and someone suggested to call as below

  C:\Users\aagashe > "C:\Program Files\Java\jrockit-jdk1.6.0_37-R28.2.5-4.1.0\bin\jr".

  MC.exe"- consoleLog 2 > & 1 | more

  I get the error message like the one below.

  18/06/2015 com.jrockit.mc.rjmx.core.connections.internal.ConnectionD 12:19:08 AM

  escriptorFolderNode initializeFromXml

  Warning: initialization of one node of file problem

  java.lang.Exception: did not find the connector with id 14dfa5f6f2b-5b99255e0c

  a0dcbf-f8c.

  at com.jrockit.mc.rjmx.core.connections.internal.ConnectionDescriptorNod

  e.initializeFromXml(ConnectionDescriptorNode.java:176)

  at com.jrockit.mc.rjmx.core.connections.internal.ConnectionDescriptorFol

  derNode.initializeFromXml(ConnectionDescriptorFolderNode.java:209)

  at com.jrockit.mc.rjmx.core.connections.internal.ConnectionDescriptorFol

  derNode.initializeFromXml(ConnectionDescriptorFolderNode.java:209)

  at com.jrockit.mc.rjmx.core.connections.internal.ConnectionDescriptorRep

  ository.loadSettings(ConnectionDescriptorRepository.java:55)

  at com.jrockit.mc.rjmx.core.RJMXPlugin.start(RJMXPlugin.java:99)

  to org.eclipse.osgi.framework.internal.core.BundleContextImpl$ 1.run (Bund

  leContextImpl.java:711)

  at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActiv

  Ator(BundleContextImpl.Java:702)

  to org.eclipse.osgi.framework.internal.core.BundleContextImpl.start (Bund

  leContextImpl.java:683)

  to org.eclipse.osgi.framework.internal.core.BundleHost.startWorker (Bundl

  eHost.java:381)

  to org.eclipse.osgi.framework.internal.core.AbstractBundle.start (mathematical

  tBundle.java:299)

  at org.eclipse.osgi.framework.util.SecureAction.start(SecureAction.java:)

  441)

  at org.eclipse.osgi.internal.loader.BundleLoader.setLazyTrigger (BundleLo

  Ader.Java:269)

  at org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFind

  LocalClass(EclipseLazyStarter.java:107)

  to org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass (C

  lasspathManager.java:462)

  at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalCla

  SS (DefaultClassLoader.Java:216)

  at org.eclipse.osgi.internal.loader.BundleLoader.findLocalClass (BundleLo

  Ader.Java:401)

  to org.eclipse.osgi.internal.loader.SingleSourcePackage.loadClass (Single

  SourcePackage.java:35)

  to org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal (Bundl

  eLoader.java:473)

  at org.eclipse.osgi.internal.loader.BundleLoader.findClass (BundleLoader.

  Java: 429)

  at org.eclipse.osgi.internal.loader.BundleLoader.findClass (BundleLoader.

  Java: 417)

  to org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass (De

  faultClassLoader.java:109)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)

  at com.jrockit.mc.console.ui.ConsolePlugin.start(ConsolePlugin.java:71)

  to org.eclipse.osgi.framework.internal.core.BundleContextImpl$ 1.run (Bund

  leContextImpl.java:711)

  at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActiv

  Ator(BundleContextImpl.Java:702)

  to org.eclipse.osgi.framework.internal.core.BundleContextImpl.start (Bund

  leContextImpl.java:683)

  to org.eclipse.osgi.framework.internal.core.BundleHost.startWorker (Bundl

  eHost.java:381)

  Any idea what goes wrong?

  It looks like your user settings might cause problems for some reason any. Try to rename your file from c:\users\aagashe\.jrmc to old.jrmc (or something else if you want), then start JRMC and see if it works better.

• I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  anesvet,
  I'm going to sound like I'm repeating myself tonight... (see previous 4 posts...)  but try this:

  When you start start pressing F8 until you get the Windows startup options.  Then try "Last known good configuration" see if that helps.  If this does not work, try to F * then try to go to Safe Mode.  If those who do not help, I would start with your XP CD to recovery mode and run "chkdsk/r" then "sfc/scannow".  QQ learn manage!

• I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true?

  I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true? What is the best way to remove the linux operating system and install windows xp?

  original title: HOW I CAN UNINSTALL LINUX OPERATING SYSTEM

  If there is absolutely nothing on the disk you want, just format the drive and install Windows XP:

  1. start from the CD. You may need to change the first boot to a CD device in the BIOS. To do this, when you switch on the look for a configuration message indicating what key to start typing, F2 and del are commonly used. The message appears for very long and it you miss, you have to restart the computer. In the BIOS, look for a section that contains the boot sequence, change it to CD, save it and let the computer to restart.

  2. the installation sequence is answering the message press any key to boot from the CD, and then press ENTER to set up Windows, press F8 to accept the EULA, delete the partition, press ENTER, type L to confirm delete, type C to create a partition, choose (Quick) format. Then begins the installation and restart will therefore ignore the subsequent message to press any key to boot from the CD-ROM.

  3. actual installation will begin and takes about 30 minutes. Finally, download all the missing Windows service packs and other updates.

• I have windows xp with SP3 and I need RDP 6.1.7600 with NLA. I had installed KB969084, but is not

  I have windows xp with SP3 and I need RDP 6.1.7600 with NLA. I had installed KB969084, but this isn't updated the RDP version. Can anyone suggest?

  Hi Prashant,

  Create a system restore point before you follow the steps mentioned below. You can check the link for the steps to create a system restore point: Windows XP system restore is easy to use: http://www.microsoft.com/windowsxp/using/helpandsupport/getstarted/ballew_03may19.mspx

  1. Uninstall SP3 on your computer. Link to see: how to remove Windows XP Service Pack 3 from your computer:http://support.microsoft.com/kb/950249

  2. then install desktop connection remote (Terminal Services Client 6.1) for Windows XP from the link below:http://www.microsoft.com/downloads/en/details.aspx?FamilyID=6e1ec93d-bdbd-4983-92f7-479e088570ad

  3. Once installation is complete, you can check the results.

  Reinstall service pack 3 on your computer from the link below:http://www.microsoft.com/downloads/en/details.aspx?FamilyId=68C48DAD-BC34-40BE-8D85-6BB4F56F5110&displaylang=en

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• From vista with a new motherboard, unable to boot into normal mode.

  Original title: from vista with a new motherboard

  My mother has crashed and I replaced it with a new one. New motherboards drivers are on a cd which runs under a windows complete envirinment. Unfortunately I can't get windows to run in safe mode, which will not install the drivers again.  What are my options? the cheapest first preference.

  Carl

  Hello
  
  Try uninstalling the drivers for all devices in the Device Manager (be sure that you select delete the driver for this deviceoption during the uninstall) and Control Panel.
  
  Then try to restart your computer and check to see if you can boot into normal mode.
  
  Steps to uninstall from Device Manager:
  
  a. After you open Device Manager, look for the device.
  b. right-click on it and choose Uninstall.
   
   
   

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• System does not boot into Windows when a USB is installed

  It's strange.  I just installed Windows 7 Home Premium Upgrade (64-bit) of a previous Vista machine.  Has made the choice of 'Upgrade '.  Now that it is finally installed and get some of the bugs resolved, a question I still have is when a (key, post HD) USB device is installed in the machine and I run a reboot or extinguished/turned on, the system starts to boot, runs through the BIOS section, but just before trying to start Windows I get a fast blinking cursor in the upper left of my screen.  If I remove all the devices usb between PC and manually must shut down and restart it restarts in Windows very well.  What is the problem?

  Desktop HP M9350F model; 64-bit; BIOS Rev 5,29 (28/04/09); BIOS Boot Priority: floppy, CD, HD, network (note: there is no other choice shown/available USB?)

  Maybe someone else has had this problem and an easy fix is avaiable.  Thank you!

  CD,

  Well believe it or not, I realized the problem.  Not the BIOS.

  One program, I have installed is SecureDoc WinMagic.  It's encryption software, although my drive has (yet) been encrypted.  In fact I had contacted the Lim before this same thread started to think it might be because of that, but he told me it was probably my BIOS and nothing to do with their SW.

  However, last night I decided to remove their SW before my "repair" operation was scheduled.  How to have this removed SW, it's just our curiosity, I decided to start once more with a USB device installed to see if the hang up has continued.   By my surprise, the start went as usual by means of windows and office.  DAMN!  all this time lost, mine and yours!

  I contacted the company SW this morning and they found a way to modify their SW and get the boot to work (always with the unencrypted disc).

  I wanted you and someone on this thread to know the outcome, so if this happens in the future with another user, this can help to avoid long-term on unnecessary troubleshooting.

  Thank you once again for all the time you have helped me with this issue!

• Unable to boot into normal mode

  model of operation only in safe mode. After an attempted chkdsk, I managed to do replace the bad clusters, I used the drive restore all day, but for some reason I can't get this model to operate out of safe mode

  Hello

  ·        What happens when you try to start in normal mode?

  Disconnect all external devices connected to the computer and then try to restart the computer and check what is happening.

  You are able to boot to the desktop in safe mode, you can try and configure the computer to clean the start State and to check whether the application or services are in conflict when booting in normal mode. To set up the computer in a clean boot state, follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Activation of Windows 7 with bootcamp and virtualbox problem

  How to correctly activate my Windows 7 Professional works on two different configurations. With Bootcamp and Virtual Box? This used to work great until an update does not allow me more. I have it setup where I can boot into parrel with my mac or by itself with bootcamp.

  Any ideas? Thank you

  You must have separate licenses for two instances of Windows 7 Professional. Both facilities are considered to be different computers. The VM (VirtualBox) and BootCamp are regarded as separate computers.

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

• IE is slow, hangs in Google, will run Firefox under Windows 7 with speed and security?

  I'm not very tech savy English so good please. I have a desktop Dell Studio with Intel 2 Quad Processer. I have used IE for 15 years and more. Started using Google Chrome for speed and better security about 6 months without any problem. Shortly after the beginning of the year Chrome started crashing every day and from 1/14 he broke the 10-12 times a day. I don't like losing stuff and having to stop, re - load, raise or re-store that Chrome was more than that was working properly.

  Will Firefox work in my system operating system. I loan on your security, password protection and other things that are touted on your website on Firefox, but I'm mostly concerned about accidents and what are the causes. Is the problem in my own system and not questions of brower?

  I just want to surf, read, watch you tube, facebook with friends and family. I am 65 years old and retired, and I'm really disguested with all the problems I encounter.

  I think Firefox is a good product, but I need answers to the questions I asked.

  We hope to hear from someone very soon on the issues that I raised. If I download Firefox, should I uninstall IE. I already have an installed Chrome =.

  Thank you
  Jim Yeary
  jyeary3 @ spring TX

  I do not know what is causing your Chrome or IE falls down, but you can give a Firefox. I'll give you a few different things you need to do before installing Firefox to make sure that your computer works well if.

  Install all Windows updates. Check several times until there is no more.

  Update your graphics Driver. Update your graphics drivers to use hardware acceleration and WebGL

  Scan of malware: troubleshoot Firefox problems caused by malicious software

  Once you have done this, install Firefox! How to download and install Firefox on Windows

• HP Jet 11-D007NA: How do I copy and paste in Windows 10 with left and right keys

  Hi Everyone,                                                                                                                27/08/15

  I know the c control and control functions v for copy and paste with Excel and Word. How do cut you, copy, and move entire folders when you are working in Windows 10? 2 tapping fingers at the same time used to work in point 8.1 of Windows but does not work in Windows 10. I want to move my documents together and download files from my drive c on a memory stick that I have only 32 GB SSD in my book and it is fill up very quickly. I don't want to lose days copy individual files and sticking them in the memory stick. That would be a common mistake. I don't understand why HP had to remove the left and right buttons and make life very difficult for its customers. They probably saved a couple of hundred by getting rid of the buttons in their calculation of costs, but made it impossible for customers to use the laptop in a productive way.

  Vijpat10

  Have you tried pressing the right and left of the touchpad corners? Most of the models without physical buttons have this function.

• Why I can boot into safe mode with internet connection, use the operating system, etc., but can not open a normal session without password administrator; who got the disabled.

  OEM Vista Home Premium. Normal startup does not recognize the password. When you click User icon it says: "your account has been disabled. Please, see your system administrator"I looked in the mirror, but it did not help. Booted, press F8, went in safe mode with network connection. Everything seemed to be there. Surf the internet and then started to ask me why I don't have a password here when I did normal start-up. What is the password? Check "Microsoft Answers", but what I came out which was, I need to reinstall the OS, which I can't do it without a drive anyway.  I thought that I've used it before, I knew the password. This computer has been recently "reinstalled" internal folder 'restore '. Something must happen. A unknown password can be removed from safe mode? Ultimately how reinstall you a clean Vista when all you have is the key to product and no local or OEM support? What would be the difference between a password reset disk and the OS disk.  The two would probably be stored side by side. Not to mention that most of us Dummies want to just surf to buy, and if we can not surf, we cannot buy. Dummies help us get back on the internet, Microsoft. At least take care of this shot.

  Hi PAM,.

  In Safe Mode, try to activate the high administrator account http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-windows-vista/.  Then log in using account and use it to solve problems with your normal administrator account login via control panel / user accounts / manage other accounts.  Find the one you want and make the appropriate changes to fix it.  If you can't, then you need to address as a corrupt account by using the following procedure:

  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If this is the only available administrator profile (you must be an administrator to solve this problem), activate the hidden administrator account (HAA) (i.e. what you did above, or you can do this by using these instructions instead: http://www.computerworld.com/s/article/9001970/How_to_access_the_true_Administrator_account_in_Windows_Vista?taxonomyId=17&pageNumber=1.)

  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  The fact that it says it is disabled gives me to think that you can use the guest or built-in Administrator account already (as normally, you cannot disable an account, but you can with these two which cannot be deleted and only disabled).

  The password reset disk is only good if created before that you need and only to restore a password, do not to activate a disabled account.  Another thing that goes beyond passwords here.

  A recovery disk allows you to do some advanced options of recovery by booting the disk, but it will help you restore the operating system (or help you with this problem either).

  An Installation of Vista genuinve disc (the operating system drive as you seem to be describing) is a disk that contains the operating system.  That, if it is the original disc supplied with the system and is exactly the same as the product OEM key that you must allow you to do a clean OS install (although I would be first backup you'll pretty much lost everything in the process).  The following should help: http://www.vistax64.com/tutorials/117366-clean-install-full-version-vista.html.

  If you have a factory Conditions or a recovery Partition restore disk, then these are alternatives to a clean install if you don't have this disc.  But the procedure varies according to the manufacturer, make and model of PC.  Most of the manufacturers will allow you to buy these records of restoration (for a fee) If you cannot do it with a recovery Partition cannot create diskettes from the recovery Partition or have no other option.  Visit the support site of the computer for information on this topic, available options, and related costs.

  If you cannot enable the built-in Administrator account and cannot access the system in normal mode with this or another administrator account, then I'm afraid a clean install or restore to factory conditions is your only option.

  I hope this helps.

  Good luck!

• Unable to boot after Windows 7 update

  Product: HP Compaq 6000 Pro format microtour

  OS: Windows 7 (not sure 32 or 64-bit)

  I installed about 15 Windows updates last week, some of them is critical, then restarted and the computer was fine. This morning my computer was slow, so I restarted, and now I can't start. He keeps go to boot menu options. I tried...

  -Safe Mode

  -Mode low resolution

  -Last good known Configuration Mode

  All of these options to the same start menu cycle.

  HP Startup Repair finds problems with the disc, says he corrects, finishes, but doesn't change anything. Back the same start menu.

  I tried removing battery from motherboard and BIOS restore to factory settings - or solved the problem.

  Finally, tried to restart from the disc installation, but apparently for HP there is only the option to restore the default settings (erase all data) and no possibility to repair or return to an earlier date. I really, really, want to lose data if possible.
  
  Any ideas?

  RESOLVED: Ran Startup Repair, but this time took so I could look at the newspaper.
  
  Root cause found: System on the disk volume is damaged.
  Repair action: file system repair
  Result: Completed successfully.
  
  Yes!
  
  Still, would be nice to know if it can be avoided in the future.

• Error on Windows XP with MDT 2010 deployment

  I imported the source files for Windows XP SP3, so I can deploy XP and created the sequence of tasks, but when the system restarts after installation without assistance theres an error in copying the files. When I copy the files to skip the configuration is interrupted due to the main installation of files cannot be found. Can anyone help me solve this problem, so I can get windows xp to deploy with no problem using MDT 2010?

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum of box to Microsoft deployment tools. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/MDT/