Unable to connect Macbook to HP Laserjet 6 p

Similar Questions

• HP LaserJet P1102w: Unable to connect Macbook to HP LaserJet p1102w

  Hello!

  A few days ago my phone company updated my router to a TG862g of Arris. Since then, I could not connect my laptop to my wireless printer. I already configured the new network in the printer config page and the printer Hello added to my list of printers, but when I try to print something, it just tells me the printer does not exist or that the printer is not respondig, I already tried disable IPv6 and all the other steps HP support advice, but nothing works. Help, please.

  

  Hello

  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem for the new printer installation process. I would like to help you to solve this problem today.

  Please reinstall the printer driver to your macbook and downloaded the driver at the bottom of the link:

  http://support.HP.com/us-en/drivers/selfservice/HP-LaserJet-P1100-Printer-series/4110394/model/4110306

  Select your desired version of operation printer driver.

  Please follow the below link info. for the wireless settings.

  http://support.HP.com/us-en/document/c02847467

  Please keep me informed of the progress of things.
  If you need help, let me know and I will gladly make all that I can to help you.
  Please let me know if that solves the problem by marking this message as "accept as a Solution.
  To simply say thank you, click the thumb upward below! Happy man

  Thank you.
  Rashed

  I am an employee engineer HP Partner

• Want 4520: Unable to connect MacBook Air to 4520 want with Verizon JetPack

  Printer shows successful login and MacBook rail together until the printer name.  I manually entered the IP but the printer driver is not displayed.  When I use the software of HP printer driver, Setup cannot find printer.  Seems that the printer can see the jetpack but not the MacBook. Any ideas?

  Hello

  Thank you for using the HP Forums.

  Here are some troubleshooting wireless;

  Troubleshoot wireless

  1. make sure that the printer is not connected to the network via an Ethernet cable
  Wireless does not work if the printer is connected to the network via an Ethernet cable. Unplug it
  Ethernet cable from the printer.
  1. make sure that the wireless light is on
  If the blue light on the printer control panel is not lit, wireless can be disabled. To turn on the radio, touch
  or drag to the bottom of the tab at the top of a screen to open the dashboard, and then tap (wireless), touch
  (Settings). Tap Settings wireless and then tap wireless to activate it.
  If the blue wireless light is flashing, it means that the printer is not connected to a network. Use the wireless configuration
  Wizard available from the Control Panel printer to establish a wireless connection. Touch or drag to the bottom of the tab to
  the top of a screen to open the dashboard and then tap (wireless), press (settings). Touch wireless
  Settings, tap the wireless configuration wizard, and then follow the instructions on the screen.
  1. make sure that the computer or mobile device is connected to the wireless network
  Make sure that your computer or mobile device is connected to your wireless network. If you cannot connect the
  computer on the network, contact the person who set up your network or the router manufacturer. It could be
  be a hardware problem with the router or computer.
  1. reboot the wireless network components
  Turn off the router and the printer and then turn them back on in this order: router first, and then click Printers.
  Sometimes, disabling devices and then turn their back on helping solve the problems of network communication.
  If you still can not connect, turn off the router, the printer and the computer and then turn them back on in this
  order: router first, then printer and computer

  Still problems? Visit the HP (www.hp.com/go/wirelessprinting) wireless printing Center. This Web site
  contains more complete information and up to date on wireless printing, as well as information to help you
  Prepare your wireless network; solve problems when connecting the printer to the wireless network. and solve
  problems of security software.
  Note: If you use a computer running Windows, you can use the tool HP Print and Scan doctor, which can help
  solve many problems, you may have with the printer. To download this tool, visit www.hp.com/go/tools.

  Hope that helps.

• Unable to connect macbook pro for iphone.

  After upgrading my iphone to the new operating system, iOS 10.0.2, I can't back up my phone via iTunes on my computer. The iphone will not trust the computer even when I select "trust".

  Hi BarbaraBL,

  Welcome to the communities of Apple Support!

  From your post, we understand that your iPhone does not connect to iTunes as expected. To begin troubleshooting this situation, we recommend that you read and works well the steps in the following article:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  See you soon!

• Unable to connect MacBook Pro to Apple TV

  All tried, Airplay is on.

  What model ATV?

  You can use the ATV with remote control to watch media?

  Have you put off, then back on your router?

• My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

  My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

  This general situation may be similar to what is mentioned in this sequel to thread of the CSA

  and if the remedy is to use instructions; detailed and I hope they are correct...

  Re: Restart fails after installation of El Capitan help!

  Or you can try and see on the repair of the system and then if your disk utility can

  See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

  the Mac system, to see if this solves the problem. There may be more than one cause.

  You could try and boot into OS X Recovery, utilities out there, and other options are available.

  • OS X: on OS X Recovery - Apple Support

  This example uses a special partition on the hard drive of recovery which is not in the

  same disc that the Mac OS X section; However if your hard drive is missing, these other

  items may also be at risk. You must have and maintain backups of your duplicate content

  on the external storage drives closed; In addition, a Time Machine backup helps to restore.

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • Tips for OS X - using HD recovery:

  http://pondini.org/OSX/RecoveryHD.html

  {Using the utility disc and other tools can be done from the boot OS X Recovery volume

  Beware of the fact these tools can also delete or reformat your content; wiping.}

  Don't know what to say; you could see visiting an Apple store with genius if

  There is an official store. Usually for best time planning you would contact them for an appointment.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)

  Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

  a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

  In any case...

  Good luck & happy computing!

• Unable to connect to the HP ePRINT with Color LaserJet Pro 400 M475dw MFP website

  LaserJet Pro 400 color multifunction m475dw-Just installed. Print, scan, copy and fax all works fine! use of WiFi

  Using IMAC OS 10.8.2 with all updates

  Netgear DGN2200v3 router using

  Printer not connect to the HP ePrint website

  Printer connects using Hp and profile for fax set up etc.  But the "HP Web Services" article when enrecorded and hit the Activate button - it does not connect to the site - it seems just to refresh.

  "If I try to connect thro the printer not the imac and try to activate the web services, it says" connection "on the screen BUT after a few minutes of trying - so says" CONNECTION ERROR - the printer is unable to connect to the service. Check the internet connection

  ANY IDEAS - HAVE I MISSED SOMETHING?

  Thank you very much

  I try to pull up the built-in web server (EWS) by entering the IP address of the printer in a browser and set a static IP & DNS address.

  The information for the default gateway, subnet mask and IP address can be accessed from the Setup menu on the front panel, go to settings > reports > network summary and it will print off the coast.

  Once you entered the IP address in a browser and have the EWS pulled up, go to the tab above titled "Networking". Then click on IPv4 in the left column; who will bring to the top of the address configuration page.  Place the manual radio button and fill in the IP address, the default gateway and the subnet mask with the information from the report. You don't fill the part entitled WINS server, which can be left alone.

  You will then want to fill in the DNS of the page part, the favorite should be set to 8.8.8.8 and the alternative/secondary must be set to 8.8.4.4. Then click 'apply '.

  Power cycle the printer. Turn off the power, wait 30 seconds and then turn it back on. Once it is fully operational, try again to connect to web services.

• Unable to connect to MacBook from other computers on the network

  original title: I can access all windows for the PC and macbook computers, but I can't access the macbook on the PC.  How can I access the macbook via the PC?

  I have windows xp laptop and a macbook.  Computers portable windows communicate with each other and the mac book with correctly.  All windows shared folders are accessible from any one of the three laptops.  But we cannot access the macbook from the laptops of two windows.  All the parameters of the SMB are fixed according to the tutorials and the macbook is visible, but are not accessible! Help please.  Similar to that of all questions ask for specific things.  I don't know where this question.  Novice here I already searched the forums.

  Hello

  I suggest to refer to the thread and follow the steps provided by Jack MVP:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/unable-to-connect-Mac-to-PC-network/e4074883-0294-4AD3-b917-95913abbd9fd

  Note: using third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

• "Unable to connect to the computer printer" message appears during installation of laserjet p1102w.

  During the installation of the wireless software for Laserjet P1102W on computer with XP Professional (pk2), the message ' printer was able to connect to the wireless network.  However, this computer is unable to connect to the printer. "I checked the printer and the computer both connected to the same network named with even WEP key, opening, credentials etc.  I have a linksys connected to the computer and the modem cable. When I connect using the USB connect wire to the computer directly, I can print.   Two software, wired and wireless, have been loaded.  My HP inkjet printer is wired to the linksys and works for multiple computers to the wireless network. Do I need to have another printer? I thought that I could still have a truly printer wireless!  I'm a novice at this.  Thanks for any help you can give.

  I called HP support.  The technology was very knowledgeable and accommodating.  HP Smart Install program (in the printer and on CD) that came in the box was an old version.  I had to reset the printer back to factory default and to download the new firmware on the HP.com website.

  The oldest had an incorrect address router (network). You can see the address of the router (IP) when you perform the self-test (hold down the button "on") under the information network.  IPv4 address must be the same as your router.  Now my printer and computer are looking at the same network.

  Works great!  Love this LaserJet.  Faster than my last HP LaserJet 4 L.

• Bought HP Laserjet Pro 200 color printer & unable to connect

  Bought HP Laserjet Pro 200 color printer & unable to connect to my Windows 7 laptop. The printer setup was a snap, but no connection. Tried all Windows resources, but...

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Unable to connect on the Messages or FaceTime after upgrading to Sierra

  Good afternoon! After upgrading my MacBook Pro (13-inch, mid 2010) to macOS Sierra (10.12.), I am unable to connect to Messages or FaceTime. They worked fine before the upgrade.

  • Messages: After entering my Apple ID and password, I get the message "Could not sign in iMessage." "Could not sign. Please check your network connection and try again. "or"an error has occurred during authentication. "My network is connected to the network (where this message), and the password is correct. Also, I have generated a password app specific to Messages. Enter just grew the message "your Apple ID or the password is incorrect." Messages is works well with my Google Talk and AIM accounts.
  • FaceTime: After entering my Apple ID and password, the engine just turns and it never connects me. Similarly, I have generated a password app specific but use it just gets the message, "your Apple ID or the password is incorrect."

  No idea how I can regain access to these applications? Thank you!

  Reached out to the Twitter account of Apple Support. He proposed to restart. It worked.

• Unable to connect to home WiFi

  Hello. Using a 2012 MacBook Pro runs El Capitan 10.11.4 and unable to connect to Wi Fi home exclusively. We had to Time Warner to get out. They gave us a new modem/router and update the connections/splitter in the basement. All our devices but my laptop can connect to the network. Our iPhones, light fires and Mac Book of wife anything can connect. The mine detects the network but cannot connect. However, I can connect my computer to other networks through my Verizon Wireless hot spot and even a 4 G LTE Kajeet hotspot unit I borrowed from the library. Any ideas what could be going wrong? I ran Wireless Diagnostics and nothing turns upward. The most frustrating part id my computer "thinks" it is online, because the Wifi symbol is obscured. But I'm not connected.

  Thank you.

  Processor: 2.3 GHz. Intel core i7.

  Memory: 4 GB, 1600 MHz, DDR3

  If you run any utility, including but not limited to clean my Mac Mac Keeper, Little Snitch, Wireshark, firewalls, etc. you must remove according to developers on their Web sites. Simply by dragging to the trash uninstall these and not help. Also any Mac antivirus application should be withdrawn from the system according to developers, even slide into the basket is ineffective.

  Once this is done, see this article

  Recommended settings for the WiFi routers and access points - Apple supported

• Tried all your suggestions and always receive "Unable to connect" when using ANY search engine.

  Can't use any search engine of FF 40.0.3 on Macbook Pro model with 10.8.5 OS 9.2. Receive "Unable to connect" message when you try to use a search engine. Other than the search engine and Mozilla Web sites to connect properly. 40.0.3 on another Mac FireFox works fine without any problems.

  In addition, I can not access the FF "Get modules" page or the home page of Mozilla. Search engines will connect not their home page or the search bar. Problem just started. I had previously been upgrade and have resorted, FF 40.0.3 without problem when it was issued. Solutions of attempts included refresh FF, launch FF in safe mode, run with all plugins disabled, graphics hardware acceleration disabled. None of these fixed the issue.

  Had already tried your suggestions, without success, but has once again to be sure. Without success. However, I made a further exploration of my own and found out that IPv6 is set to "Link Local" only in my router. I have reset on 'Automatic', the router reset to update, and my problem was solved. So it was the IPv6 setting (unlikely) or the router reset (probably) that solved the problem, or it is your suggestions I tried and did not work, COMBINED with the router reset which solved the problem (quite possible).

  Thanks for the comments!

• Unable to connect to Apple ID after upgrade to ElCapitan 10.11.5

  I have the Macbook Air 11 "1.4 Ghz i5 with 4 GB 1600 MHz DDR3 (early 2014)

  I can't connect to the Apple ID (iCloud, Appstore...) after upgrade in ElCapitan 10.11.5

  About 3 weeks ago I improve my OS in ElCapitan as there was a signal of the Appstore upgrade.

  The download process and the installation was successful, but stuck on 'prepare your mac' session. It took about 2 hours, with cursor processing... Then I closed (push the power button on the keyboard) and turn.

  My Mac can work and in "about this Mac" already made it known that the OS is ElCapitan 10.11.5.

  But unfortunately, since then, I can't sign my Apple ID in the Mac (I use several apple 'iphone', 'ipad' products and my apple ID still works)

  

  I came to the nearby authorized Apple service, they don't have that one solution to re - install my Mac and I have to pay

  Maybe someone has a solution...

  Hi atiqurrakhman,

  From the information provided, it appears that you are unable to connect to your Apple ID for several services on your Mac from your update of OS X El Capitan 10.11.5. I know it's very important to have access to these services on your Mac, then I would be happy to provide assistance.

  Before you start, I recommend that you create a backup of your data using Time Machine. This website will provide more information:

  Use Time Machine to back up or restore your Mac - Apple Support

  Since the update seems stuck, it can not been installed properly on your system. The next step, I would recommend that you reinstall OS X from recovery using the steps here:

  How to reinstall OS X on your Mac - Apple Support

  Reinstall OS X from recovery

  If a recent Mac, you can use OS X Recovery to reinstall OS X.

  

  1. Turn on your Mac.
  2. As soon as you hear the startup tone, hold down the command and R on your keyboard.
  3. Release the buttons after the appearance of the Apple logo.
  4. If you are prompted, select a Wi - Fi network, or connect your Mac to the Internet via an Ethernet cable.
  5. After that the recovery menu will appear, select the option to install OS X.
  6. Follow the prompts on the screen to select your destination drive and install OS X.

  Once this process is complete, try to sign in with your Apple ID using multiple services to see if the problem has been resolved.

  Have a great rest of your day!

• Unable to connect to the website of 'http', steam and App Store

  I use a Macbook Pro 13 inch, mid-2012 with OSX Yosemite 10.10.5. I had a problem with my network which I cannot connect to the 'http' site in Google Chrome or Safari. It shows ' site is not reachable, refused to sign, ERR_CONNECTION_REFUSED '. In addition, I can not connect to Steam and it shows 'code error - 102, unable to connect to the server. "Server may be offline or you cannot be connected to the internet". I can access the App Store, but most of the app doesn't load the image, and it seems weird that I cannot install or update applications from the App Store. It is said "we could complete the purchase. Cannot connect to the server'. Finally, I can connect to the Web site "https" as google.com, facebook.com, youtube.com, and apple.com. I don't know what I was doing before that happens because I'm not all of the firewall settings or IP network since I bought it. I don't even no matter what antivirus installed on my macbook. I do not think that the problem of my wifi because it works fine on my other devices. I try to fix but still have no luck.

  Here what I was trying to fix my problem:

  1. I try to restart the computer, then reconnect to my wifi - nothing fixed

  2. I have try to change the DNS 8.8.8.8 and 8.8.4.4 - still not fixed, worse still, unable to connect all Web sites

  3. I try to delete the Library/Preferences/SystemConfiguration folder and restart the computer - nothing has changed

  4. I try to start safe mode and it works very well and when I reboot to normal, it still happens

  5. I try to remove and re-add the Chrome in the firewall settings to allow incoming connections - nothing fixed

  6. I try to delete all the data navigation and cookies in Chrome and Safari - still not fixed

  7. I try to plug in the ethernet cable, as a first step, it works very well. Then, when I disconnected and reconnected again for the second time, and then he had the same problems.

  What I saw here, I check that iTunes had recently many updates with the same version of iTunes 12.4.1 since June 4, 2016 (1 time), June 5, 2016 (1 time), June 6, 2016 (2 times), June 7, 2016 (7 times), June 8, 2016 (2 times), June 10, 2016 (9 times), June 11, 2016 (1 time) and June 12, 2016 (1 hour). I don't know if this is normal or not because he had to download and installed about 24 times with the same versions! It is possible that iTunes is the cause of this problem? Any help and suggestions that can solve my problem? Thanks in advance!

  Is your date and time is set correctly? 5 minutes from the perfect?